Finding rack mount kit for Cisco SF300-48P
I have a 10/100 POE managed switch laying around that I wanted to rack up to use for my VoIP phones. I however, had since lost the mounts (or never had them to begin with).
I've been looking all darn day for mounts just for this. It doesn't seem to fit any other of the 10,000 or so rack kits I have in house.
So far google and Ebay have been failing me. Everyone wants to sell me a darn switch, and I have that. I just want the bloody ears gosh darnit.
Can someone please, send me a model number I can search for on Amazon or Ebay to grab them?
Cheers,
Mike
If you are in the UK you could try ringing hardware.com.
They have supplied me with 'cisco-compatable' rackmount kits in the past at a fraction of the price of the genuine article.
Worth a shot.
Similar Messages
-
Rack mount kit for SRW208P?
Hello all -- anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU. Thanks.
VictorHi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
-Tom
Please mark answered for helpful posts -
Hi Team,
Looking that either the rack mount kit for ESW500 is orderable as a spare. I'm not sure if the one for UC520 can fit the ESW500s
ACS-UC500RM-19=
https://supportforums.cisco.com/docs/DOC-9698
Best Regards,
SohaibHi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
-Tom
Please mark answered for helpful posts -
Included or spare part? Or maybe not availble?? :)
The "Router Mounting Procedures" indicates they are not included but must be ordered separately. However I do not see any associated part numbers provided. I have requested this information from the product team and will provide more details when I get them.
Best Regards,
Glenn -
Rrack mounting brackets for Cisco switch SF300-48P ?
Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?
You might be able to get them through Cisco support. Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets
-
What's the Part Number for the Cisco WLC 2100 rack mount kit?
Thanks in advance.Allows for convenient desktop mounting or rack mounting, with optional rack mount kit for flexible deployment.
http://www.cisco.com/en/US/products/ps7206/products_data_sheet0900aecd805aaab9.html -
May I know the rack mount kit for ASA 5505 released yet? May I have the part number of it?
Many Thanks!I checked with my local SE before, they also haven't any information.
Because my local SE give me wrong part no of this rack mount kit, I need to provide this part no for replacement!
Many Thanks!
Hang -
Come on Apple. If you are change from Xserve to Mac Pro for servers, at least offer a rack mount kit or a case that has attachable rails. I don't want to use 12U of space to stand up a Mac Pro on a shelf in a rack.
I apologize if you already offer this as an optio, but I sure couldn't find it.Some rumor sites are saying that a new Mac Pro cabinet is being developed which will change rack mounting. We may know more about it by the end of the summer.
-
Anyone have a used rack mounting kit (076-1234) ?
I bought a great Early 2008 Xserve from a guy. I'm building it up now with fresh ram, new enterprise hard drives etc. It's coming out great. But I need to get a square hole rack mount kit. I thought that would be the easy part, but they're really hard to find. The only places that carry them online, are price gouging the crap out of them because apple has stopped selling them. I don't need a nice shiny new kit though. A well used, paint-scraped rail kit would be perfect.
Hi stephenberry,
I have 2 Right brackets because it was shipped wrongly from a reseller as well. Would you be willing to trade a left bracket for a right bracket? -
Rack mount kits doesn't fit the depth of Agilent rack
I have a PXI 1085 Chassis which I want to mount in an Agilent rack. I purchased the front and rear rack mount kits, the height and width are great, but the depth of my rack doesn’t allow me to use both the front and rear rack mount kits. Is there some kind of adapter I can buy which will extend the rear rack mount so that it can reach the back?
Hi Chall,
Unfortuantely we only offer the kits for a certain size range. If this does not fit your rack then you will have to create a custom rack mount.
Regards,
Kaitlin N.
National Instruments
Applications Engineer -
MCS-7835H3-OFFER= Is a rack mounting kit included?
I have a customer who is getting their MCS7835H2-DMM51K9 server replaced with a MCS-7835H3-OFFER=
All I need to know is, does the MCS-7835H3-OFFER= come with a rack mounting kit or not? If not, could the existing MCS7835H2-DMM51K9 server's rails be reused?
I'm assuming that it's the same chassis but with a faster processor and more mem/disk and would be a straight swap but can anyone clarify if this "H3" part number comes with a rack mount kit?
Thanks,
DRAll currently shipping Cisco MCS 7800 servers include a “generic/third-party rail kit”.
● Compliant with 19-inch Industry-standard EIA-310D
● Depth range of the slides is from 440mm to 790mm
● Threaded racks: M6, 10-32, and 12-24
● Also enables punched round and square hole racks
Cisco Unified Communications Solutions Ordering Guide
Page 64
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf -
Is there a mount kit for an esw-520
Hi,
I have a customer that has 'lost' their mount kit for the switch. Is there a way to purchase a spare set?
Thanks!
ChrisHi Chris,
Mounting kits some with a new product or a RMA (replacement ) product. I am not aware of a p/n you can order for spare rack mounts.
regards Dave -
Catalyst 3850 rack mount kit: 3850-RACK-KIT or C3850-4PT-KIT ?
When purchasing a Cisco Catalyst 3850, do we need to buy the rack mounting kit to install it in a standard 19" rack? 3850-RACK-KIT or C3850-4PT-KIT ? Is the 4-point kit really necessary, can the 3850 hang only on the front of the rack?
No, you don't need the C3850-4PT-KIT. 3850-RACK-KIT comes in the box and it is good enough as long as you rack it nice and tide. The reason some people use C3850-4PT-KIT is because the switch will hang from the back a little when using 3850-RACK-KIT and so if you don't like that than you want the 4PT.
HTH -
Extras from the Rack Mount Kit
With the XServe rack mount kits sending us parts for both the shallow and deep racks, is there something we can do with all the extra parts we do not use? Does apple have a recycle/reuse for them or do we just send them down to the local recycler along with the soda cans from install night?
I also keep thinking there has to be some good use for that large white plastic shipping cover that comes on the XServe but we only have so many doors needing propped open.
Any suggestions?Your local Apple Authorized Service Provider would probably love them! If you gave them to him free, he would be your new best friend, and you would strike up a relationship with someone who may work with you when it comes time to procure new hardware.
-
VLAN trunking from Cisco Catalyst 3750 to Cisco SF300-48P issue and related
Hello expert,
I'm having difficulties to configure VLAN trunking between Cisco Catalyst 3750 switch with Cisco SF300-48P switch and my workstation unable to get any DHCP IP from our DHCP server via Cisco SF300-48P switch. Below is the snippet of configuration on both switches:
[Cisco Catalyst 3750 Switch]
interface GigabitEthernet1/0/45
description NCC-CC-1stFlr
no switchport trunk encapsulation dot1q
no switchport trunk allowed vlan 101-103
spanning-tree portfast
[Cisco SF300-48P Switch]
interface fastethernet48
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 101-103
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
interface fastethernet29
switchport mode general
switchport general allowed vlan add 103 tagged
switchport general pvid 103
Are these are correct? Kindly advice!
Thank you very much!
Regards,
AlexHi Alex,
for the trunk port on Catalyst on port GE 1/0/45, we need to enable the trunk and for on encapsulation dot1q because this catalyst model is ISL capable also and the SF300 working only with Dot1q Encapsultion
The configuration on catalyst should :
#config terminal
#interface Gi 1/0/45
# switchport encapsulation
#switchport trunk encapsulation dot1q
#switchport mode trunk
#switchport trunk allowed vlan 101-103
#spanning-tree portfast
For SF300 the port trunk it looks fine but for the port where the PC should receive an IP address
#interface fastethernet29
#switchport mode access
#switchport ccess vlan 103
Please let me know after this configuration
Thanks
Mehdi
Please rate or mark as answered to help other Cisco Customers
Maybe you are looking for
-
How to calc load parameters field for INSTALL for LOAD command
Hi everyone , I'll appreciate it if anyone could help me to find out how to calculate load parameters field for Install for Load Command . (which tags and parameters I should use to make this field ) Best Regards, SHKas
-
All Settings Suddenly Changed - All Info Removed from Iphone
This morning I went to sync as usual and got an error message saying "not enough space on my iPhone".. which has never happened before.... As I started to investigate, (using the iTunes inteface) it looks like all my music was removed from my phone.
-
Why don't the pictures for my contacts show up in mail?
So I was tweaking my mail settings a bit and noticed I could set the application (using my iMac mail here), to display the pictures of senders. It does this for a few of the emails but only a few. I have gone into my contacts (address book) and ver
-
ORA-12570 TNS PACKET READER FALIURE
Dear Gurus I am using following: 1- Oracle 10g (10.1.0.2.0) at server level using operating system Windows 2003 server. 2- Windows Vista 32 Bit (Service Pack 2) client 3- Oracle 9.2.0.1.0 Install at client machince (administrative level) 4- Forms6i,
-
Trying to update my iphone. I go to settings then general. But, there is no option for updates.. My iphone is 2 years old and I have never updated it but I need to now to get some of my apps working again. Help??