Finding replacement xServe RAID Drive Modules for sale

I've just started a new IT job and inherited an xServe (snow leopard) and xServe RAID
I'm not an expert on either. I've some experience with OS X Server, but I've never been a full on server admin.
One drive is dead. I believe they're 500GB units in the first six bays.
I also believe this is the most recent xServe RAID hardware. Purchased in 2008 or so.
So, first, where on earth would I buy a replacement?
And assuming that's possible, what are people's suggestions for buying drive modules for the other bays, and replacement parts for the xServe itself (power suppies, etc.).
Thanks!

first of all i don't have experience with proprietary Apple products, but typically i believe you can buy any hard drive so long as the interface is compatible (SATA or SAS for example) and the size is the same.  there should not be a need to buy 'special Apple xserve hard drives'.  if you buy a drive larger than 500 GB then the extra space beyond 500 GB will just be ignored depending on the type of RAID you have setup.  definitely do not buy a disk smaller than 500 GB.  pull out the disk that is bad and see what the make/model is.  my xserve uses Seagate drives so you could probably just search eBay or whatever for the model number of the drive and use that.  the hard drive should be able to be removed from the caddy so you don't really need a whole new "module".
as for power supplies those are proprietary and will need to be purchased thru apple or somewhere else like eBay, just search for the part number...

Similar Messages

  • Where to buy a xserve RAID drive module in the UK?

    Hi does anyone know anywhere that still sells xserve RAID drive modules for a 2005 RAID
    we have 400 GB drives but can use a 500 GB because we have the latest firmware.
    If modules are unavailable can I take the failed drive out of the module and replace with a new one.
    The current drive is a Hitachi Deskstar HDS724040KLAT80

    Just sold our complete xsan setup (42 400Gb modules included) for 2500 euro... (so 60 euro per drive) and that included 4 XServes as well

  • Proper drive modules for a G5 Xserve?

    Hi all,
    We need up upgrade the drive modules in a G5 Xserve. I checked in the apple store, and the 750 GB SATA modules have this line:
    "These Serial ATA Apple Drive Modules are qualified for use only with the new Intel-based Xserve. For Xserve RAID or older Xserve (G4 based) products, use the Apple Drive Module with Ultra ATA (parallel) support only. For Xserve G5 systems, use the previous generation Serial ATA drive modules."
    The problem is, I don't see this "previous generation Serial ATA drive modules" anywhere. Similarly, the Ultra ATA drives have this line:
    "These Ultra ATA drives are qualified for use with Xserve RAID only. For Xserve G5 or Intel-based products, use the Apple Drive Module with Serial ATA only. "
    My question is, what drive modules should I be using?!
    Also, does anyone think Apple will be coming out with 1 TB modules in the near future, and if so, what are the odds of compatibility with the G5 Xserves?

    Hey guys,
    A heads up.. I've had 4 flavors of SATA ADM:
    1. 80GB SATA Hitachi (xserve g5 gen)
    2. 80GB SATA Seagate (intel gen)
    3. 250GB SATA (xserve g5 gen)
    4. 750GB SATA (intel g5 gen)
    Needless to say, all 4 work in either the xserve g5 or intel, and either can boot as long as the partioning is setup appropriately (guid or apple). With that said, there actually is a GB size difference between the 2 80GB models, which does make life complicated if you have an only xserve g5 and want to get a new 80GB to make a raid 1 (either the solution is to look for an older model on ebay or to wipe both drives).

  • Standard Driver Program for Sales Order Confirmation

    Hi,
    My requirement is to develop smartforms and driver program for Sales Order Confirmation.
    For doing this, I found there is a standard smartforms R2RBL_SDORC_L for Sales Order Confirmation. So I thought I can take a Z copy of this smartform and modify it to my requirement. So that we can use the Import parameters (Form Interface parameters) of the form R2RBL_SDORC_L. This will also reduce the work of writing the code in Driver program.
    Now, I need to know what is the standard driver program for this form R2RBL_SDORC_L. If I can find the program name, I can take a Z copy of that and enhance it to my requirement.
    Ultimately I believe I can reduce the work of writing code to fetch all Sales order details.
    Can anyone let me know the standard driver program name for the form R2RBL_SDORC_L?

    Can anyone share how you approached in developing smartforms and driver program for Sales order confirmation?
    Note: This program and smartforms will be assigned in the NACE transaction.

  • Driver program for Sale Order

    Hi all,
    Can any body tell me Standard Driver program for Sale Order Smart form?
    Useful answer will be rewarded
    Thanks in advance,
    Sachin.

    Hi Sachin,
    you can do this by,
    <b> NACE</b> (tocde) -->  select  <b>Sales</b> --> click <b>output types</b> -->
    select any standard output type --> double click on processing routines.
    You can see the program name
    For this it is -
    <b>RVADOR01</b>
    Reply me if there is any queries

  • I would like to replace the hard drive cable for a 13" mid 2010 macbook pro.  What is the right model of the hard drive cable?

    i would like to replace the hard drive cable for a 13" mid 2010 macbook pro.  What is the right model of the hard drive cable?

    https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
    Apple Part #: 922-9062, 821-0814-A

  • Driver program for sales order in smartforms?

    whatst he driver prog for sales order in smartforms?
    how to attach my smart form to driver prog
    thanks  & regards
    lakshmi

    Hi,
      Driver Program is the program which is used to link the form and the ABAP program.
    U have to use the FM 'SSF_FUNCTION_MODULE_NAME' to give the form name.
    Here 'Z_TRNG_SMART_MUL_PURCH_T012' is the form name.
    sf_formname = 'Z_TRNG_SMART_MUL_PURCH_T012'.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = sf_formname
        IMPORTING
          fm_name            = sf_fm_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION sf_fm_name
        EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
          v_ekpo                     = v_ekpo
         v_adrnr              =  v_adrnr
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
        TABLES
          it_ekko                    = it_ekko
          it_ekpo                    =  it_ekpo
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks & Regards,
    Roja Velagapudi.

  • Where can i find or download a driver software for my iphone, my pc did not recognized it

    where can i find or download a driver software for my iphone? My pc did not recognized it!

    Download iTunes and install iTunes and that will install the drivers.

  • Xserve G5 Drive Module meets Apple Store Lunacy

    Dear Apple,
    I don't understand... you force me to buy drive modules from you which I'm cool with. But you only give me a 74GB option?!? Seriously. Program me a drive larger than 74GB and make me pay a fortune for it, but don't leave me with only one option and nothing else. This really discourages me from wanting to buy more Xserves.
    I feel very like a very disappointed customer right now.
    Michael

    Here is the link to the 750GB SATA for Xserve G5 from the Apple store:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E172&nplm=MA504G/A
    But the bottom of the page states this:
    Apple Drive Module Serial ATA Compatibility: These Serial ATA Apple Drive Modules are qualified for use only with the new Intel-based Xserve. For Xserve RAID or older Xserve (G4 based) products, use the Apple Drive Module with Ultra ATA (parallel) support only. For Xserve G5 systems, use the previous generation Serial ATA drive modules.
    The problem being experienced by the original poster is what brought me here! I went nuts yesterday trying to track down just what drive modules are available for the Xserve G5!
    Message was edited by: iGary

  • Had to replace Xserve RAID controller and now I get Xsan Admin: ERROR: duplicate LUN label RAID1-Left1

    I need some help, I had one of my five Xserve RAID boxes fail. The upper controller card needed to be replaced and so we replaced it. But now only one of my volumes is loading and I am seeing the following error in my Console.
    7/18/12 9:23:18.550 AM Xsan Admin: ERROR: duplicate LUN label RAID1-Left1
    This raid box holds three LUNs. the left is split into two with one being the metadata / Journal for the main volume and the 2nd being the same for my secondary volume. The right side of this box is the second volume while the remaining 4 RAID boxes are my main volume. Here is the rub, the main volume is using the left1 LUN and the secondary is left2. The left2 is the one that is not working and when I go into the LUN info the WWN number does not match the actual id on the raid box.
    HELP!!!!
    Thanks,
    Kevin Rosenthal

    Did you try turning it off and on again? I mean, the full SAN shutdown/startup: http://support.apple.com/kb/HT4027
    You're probably seeing "duplicate LUN labels" because the MDC has seen two LUNs with the same label but different serial numbers since it has been online. The serial number (which I think is based off the WWN) would have changed when the RAID controller changed. A reboot should fix that specific error message.
    If the volume still doesn't start after rebooting, then you would want to check the cvlog for that volume.

  • Xserve G5 Drive Module Activity LED problem

    So, I have little problem with our Xserve G5.
    Are there 3 HD's in the Xserve in RAID 5 config. The activity led (blue) of the first modul is not show any activity. But the megaraid is show that everything is all right with all of ADM's. The green/red led is show that, the 1st ADM is working fine (Green light), too. (There are 500 GB capacity on 3pcs 250 GB ADM in RAID 5)
    Only the OSX Server was on the raid disks. We have an Xserve Raid for the storage.
    Is it possible to really not activity on disk disk? Or the led is wrong... Or is there a contact problem betwen the ADM and the Xserve?
    So I have tried something: I unlocked the Server with the key, and I opened the first ADM. The the 'handle' poped out. In this case the activity led was blinkin' correctly. Naturally the raid config was collapsed, but after I reconfigurated (not rebuilt, because it was faster, and only the OSX Server was on the disks) the led has "blinded".
    Xserve G5   Other OS  

    If I pop out the ADM handy, the blue LED is blinking.
    As I think the LED is working...
    As I said, that I pulled out the ADM from its holder and the raid config was collapsed.
    So, I will have another try with a brand new ADM later on this week. If it'll solve my problem, I inform you....
    THX

  • Standard driver program for sale order

    i am working with sale order confirmation,(smartforms)
    is there any pre defined driver program for this.Not RVador01/
    and i need to display the output in the form of a print out or PDF for sending the mail.
    So please give me the logic for this.

    Hi,
    have a look at table <b>TNAPR</b> to check the print program assigned to your smartform/sapscript.
    Best regards.

  • Need help finding correct external hard drive enclosure for a T61 hard drive

    Hi, recently my lenovo T61's video card fizzled out right after the warranty expired. I have information on the laptop's hard drive that i need to get off of it. I have a hard drive enclosure for my old hp laptop's hard drive but the two drive have different connectors. I was hoping someone could point me in the right direction to find a lenovo T61 hard drive compatible external hard drive enclosure.
    The hard drive is a 100 GB 7200 RPM drive
    Model: HTS722010K9SA00
    HDD: 7K200-100
    LENOVO P/N: 42T1056
    HITACHI P/N: 0A53257
    MLC: DA2141

    what model is your HP laptop? also how old is it?
    Prior to SATA connector there is the PATA connector.
    http://archmemory.mobi/index.asp?PageAction=Custom&ID=106&imz_s=4c80f54d8ae8704709fec3ff867052fe
    have a look at this.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Function Module for Sales items condition types

    Hi,
    I would like to get Sales item amount details based on condition types tax or discount.
    Is there any function module to output amount for sales item and condition type.
    Thanks in advance for your help.
    Thanks,
    Ramana

    hi
    i have vbeln and posnr
    my requirement is to calculate repricing for sales order.
    i am having problem with function pricing means what parameters to be passed in komp and komk structure.
    can you plz send me sample code if possible?
    thankx in advance.

  • Need function module for Sales order overall status

    Dear Team,
    Our requriement is we need to capture sales orders overall status 'compleated' in header and item datat details.
    Could you please let me know what are function modules available for to get the over all status for sales orders, (header and item)
    Thanks & Regards,
    MK.

    Hi MK,
    Use any of this FMs.
    C1CE_VBUK_READ
    SD_VBUP_READ_WITH_VBELN
    WCB_VBUK_READ
    Note that the values are in table VBUK and you can do a select statement from that table to get what you need.
    Regards,
    Peter

Maybe you are looking for