Finding Service Name
Okay, I'm a bonehead. I installed 9i release 2 on a Windows 2000 test box several months ago. I got busy and didn't write down any of the basic information for the instance, and now I need to find the Net Service Name. Is there in installation log that keeps track of things like that when you do an install?
Thanks!
Hi!
Open a command prompt and type
lsnrctl status
This should show you the service names that the Oracle instances on your machine has registered with the listener.
Note: Above is not tested on a 9i install :)
Hth,
Fredrik
Similar Messages
-
Listener_scan1 could not find service name
Hi All,
I have installed 11203 on 2 node RAC cluster. I have created 1 scan listener. when i give lsnrctl status LISTENER_SCAN1, I am getting below error
TNS-01101: Could not find service name LISTENER_SCAN1
Please give your suggestions and help on this issue.
Thanks,
NRHI,
Try to configure the tnsnames.ora in this format and let me know
if you are using load balancing , try
TBESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1_vip)(PORT = 1531))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2_vip)(PORT = 1531))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TBESTDB)
And you can add below if you would like to connect to specific instance
RAC1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rac.oracle.com)
(INSTANCE_NAME = rac1)
RAC2=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rac.oracle.com)
(INSTANCE_NAME = rac2)
Note: Replace the SID, Servicename, hostname, port etc according to your environment, And also make sure that the tnsnames.ora should be in a proper format(eg : even the opening and closing bracket should be in correct order. If u add additional space also it will throw error..)
Regards,
Pradeep. V -
TNS-01101: could not find service name
Hello all,
My env: windows 2008 server R2 with oracle two node RAC (11.2.0.3)
we are using SCAN. and when i check the lsnrctl status LISTENER it shows the status, but when i check lsnrctl status LISTENER_SCAN1 it gives TNS-01101 error. When i check ed the listener file which is in the grid location I can see the entry in the listener file.
My listener looks like this:
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
C:\Users\dbadmin>srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node xxxxxx
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node xxxxxx2
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node xxxxxx2
Thanks,
Edited by: 931643 on Nov 6, 2012 7:26 AMLSNRCTL> status LISTENER
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.3.0 - Production
Start Date 24-OCT-2012 14:27:37
Uptime 12 days 21 hr. 2 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\11.2.0\grid\network\admin\listener.ora
Listener Log File C:\Oracle\11.2.0\grid\log\diag\tnslsnr\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xx)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xx)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "SAM.example" has 1 instance(s).
Instance "gisprd1", status READY, has 1 handler(s) for this service...
Service "SAMXDB.example" has 1 instance(s).
Instance "gisprd1", status READY, has 1 handler(s) for this service...
The command completed successfully -
Hi,
I have a application where i need to display Name for all the service application. Specifically i need to get the size of user profile service application and Managed metadata service application name.
Please guide me. :)
Thanks and Regards:
SanjayYou can use
http://blogs.technet.com/b/tothesharepoint/archive/2011/12/19/find-active-databases-used-by-sharepoint-server-2010.aspx
Get-SPDatabase | Sort-Object disksizerequired -desc | Format-Table Name”
http://webcache.googleusercontent.com/search?q=cache:kMHQXNGmjcwJ:sharepointstruggle.blogspot.com/2011/08/programmatically-enumerating-databases.html+&cd=1&hl=en&ct=clnk&gl=in
using(SPSitesite
= newSPSite(url))
using(SPWebweb
= site.OpenWeb())
SPFarmf
= site.WebApplication.Farm;
foreach(SPDatabaseServices
inf.Services.OfType<SPDatabaseService>())
Console.WriteLine(string.Format("Found
Database service {0} of type {1}",
s.Name, s.GetType().Name));
foreach(SPDatabaseServiceInstancespdsi
ins.Instances)
Console.WriteLine(string.Format("|-Found
Database Service Instance {0} ({1})",
spdsi.DisplayName, spdsi.Name));
foreach(SPDatabasespdb
inspdsi.Databases)
Console.WriteLine(
string.Format(" |-DB: {0}\r\n |-TYPE: {1}\r\n
|-HOST: {2} ",
spdb.Name.Length
> 70? spdb.Name.Substring(0,
65)
+ "...": spdb.Name,
spdb.GetType().Name, spdb.Server.Name)
http://social.msdn.microsoft.com/Forums/en-US/61e4e56e-e373-4167-ba97-e0f411feefe9/how-can-we-programmatically-find-the-names-of-sharepoint-databases -
Cannot find service {0}. Parameter name: SQLWriter SQL Express 2008 R2 SP2
Hi, installing SQL Express 2008 R2 SP2 onto Windows Server 2012 R2. I had previously removed SQL Express 2012 due to failed install due to incompatibility with our SAN. (I had uninstalled it via Programs & Features,
and also by following Shanky's tips. http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx).
This is what's in Detail log:
014-10-07 13:12:00 Slp: Parameter 5 : SqlEngineConfigAction_install_confignonrc
2014-10-07 13:12:00 Slp: Parameter 6 : 0x50806C41
014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL
Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:02 Slp: Cannot find service {0}.
The SqlEngineConfigAction_install_confignonrc part is what is in the background before the
Cannot find service {0}. Parameter name: SQLWriter pops up.
And in Event Viewer:
Log Name: Application
Source: Microsoft-Windows-RestartManager
Date: 10/7/2014 1:11:48 PM
Event ID: 10010
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer:
Description:
Application 'C:\31f53f2e988a36f2c31e\x64\setup100.exe' (pid 688) cannot be restarted - Application SID does not match Conductor SID..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
<EventID>10010</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-07T20:11:48.532980400Z" />
<EventRecordID>4538</EventRecordID>
<Correlation />
<Execution ProcessID="732" ThreadID="2548" />
<Channel>Application</Channel>
<Computer></Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<RmUnsupportedRestartEvent xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
<RmSessionId>0</RmSessionId>
<Pid>688</Pid>
<FullPath>C:\31f53f2e988a36f2c31e\x64\setup100.exe</FullPath>
<DisplayName>Managed SQL Server Installer</DisplayName>
<AppVersion>0</AppVersion>
<AppType>5</AppType>
<TSSessionId>2</TSSessionId>
<Status>67108865</Status>
<Reason>1</Reason>
</RmUnsupportedRestartEvent>
</UserData>
</Event>
Found one article saying you can get this if previous version not fully removed, and to do a repair of the previous version, but as I said I uninstalled it and followed all steps for cleanup, so nothing to repair.Here is the ERRORLOG file from C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log. At the bottom I am seeing the error you said before was a SAN issue. I had hoped that issue was only with
SQL 2012, but it appears it is even with 2008?
If that is still the issue, I'm trying to understand if by the articles, if the SAN conflict is an OS issue or an SQL issue? In other words, is it because the OS is Server 2012? Or would this still occur if I install SQL
2008 on Server 2008 R2? I don't know that they will be willing to upgrade the SAN, and I don't really want to fool with a .VHD (virtual disk) as a workaround speaks of.
If you're asking if I did this from your article: select startup account for Database Engine services as NT Authority\SYSTEM
, I don't recall what I did this last time. I was doing that the last few days, but I think I didn't switch it to that once, just to see if I would have success. I don't know if that was this last time or not when I switched it.
Is there anywhere I can check that after the fact?
014-10-08 12:53:09.84 Server Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-10-08 12:53:09.84 Server (c) Microsoft Corporation.
2014-10-08 12:53:09.84 Server All rights reserved.
2014-10-08 12:53:09.84 Server Server process ID is 2640.
2014-10-08 12:53:09.84 Server System Manufacturer: 'IBM', System Model: 'IBM System x -[7870AC1]-'.
2014-10-08 12:53:09.84 Server Authentication mode is WINDOWS-ONLY.
2014-10-08 12:53:09.84 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-10-08 12:53:09.84 Server This instance of SQL Server last reported using a process ID of 2848 at 10/8/2014 10:56:44 AM (local) 10/8/2014 5:56:44 PM (UTC). This is an informational message only; no user action is required.
2014-10-08 12:53:09.84 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-10-08 12:53:09.84 Server Command Line Startup Parameters:
-m SqlSetup
-f
-Q
-q SQL_Latin1_General_CP1_CI_AS
-T 4022
-T 4010
-T 3659
-T 3610
-T 902
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf
2014-10-08 12:53:09.86 Server Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.
After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
2014-10-08 12:53:09.86 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-08 12:53:09.86 Server Detected 16 CPUs. This is an informational message; no user action is required.
2014-10-08 12:53:10.00 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-10-08 12:53:10.01 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-10-08 12:53:10.01 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2014-10-08 12:53:10.03 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-10-08 12:53:10.05 Server Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No
user action is required.
2014-10-08 12:53:10.06 spid7s Warning ******************
2014-10-08 12:53:10.06 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-10-08 12:53:10.06 spid7s Starting up database 'master'.
2014-10-08 12:53:10.08 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.08 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size. -
Unable to find a WSDL that has a definition for service name
Hello,
I have a wsdl shared in mds and a composite with a bpel process that consumes that wsdl, but when that happens I get the following error:
oracle.fabric.common.FabricInvocationException: Unable to find the WSDL service defined for service name {http://directvla.com/schema/businessdomain/ServiceConfigurationRules/v1-0}ServiceConfigurationRules_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace and service name in the #wsdl.endpoint element. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.
I checked the composite, the wsdl and the endpoint and everything is ok. At the momment to avoid the error, the wsdl is local, but this is not a real solution, what I really need is to make it work with the mds.
Can somebody help me?
Thank for advance.Hi,
here is my wsdl:
<definitions
targetNamespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0"
xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0" xmlns:tns="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0" xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules" xmlns:tns="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<xsd:import namespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters" schemaLocation="oramds:/apps/schemas/RESB/RulesParmsInput_2.xsd"/>
</xsd:schema>
</types>
<message name="ServiceActivationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
</message>
<message name="ServiceActivationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
</message>
<message name="ServiceActivationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
</message>
<message name="GetAddActivationConfigurationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
</message>
<message name="GetAddActivationConfigurationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
</message>
<message name="GetAddActivationConfigurationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="ResourceChangeMigrationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
</message>
<message name="ResourceChangeMigrationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
</message>
<message name="ResourceChangeMigrationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
</message>
<message name="ResourceChangeMigrationUpgradeRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
</message>
<message name="ResourceChangeMigrationUpgradeResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
</message>
<message name="ResourceChangeMigrationUpgradeException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
</message>
<message name="GetServiceConfigurationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="GetAntenaSenialRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
</message>
<message name="GetAntenaSenialResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
</message>
<message name="GetAntenaSenialException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="OrderPayPerViewRuleRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
</message>
<message name="OrderPayPerViewRuleResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
</message>
<message name="OrderPayPerViewRuleException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
</message>
<message name="GetOperationForWOServiceTypeRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
</message>
<message name="GetOperationForWOServiceTypeResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
</message>
<message name="GetOperationForWOServiceTypeException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException"/>
</message>
<message name="CompareResourceTechnologyRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
</message>
<message name="CompareResourceTechnologyResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
</message>
<message name="CompareResourceTechnologyException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyException"/>
</message>
<message name="GetBasicProductMigrationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
</message>
<message name="GetBasicProductMigrationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
</message>
<message name="GetBasicProductMigrationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationException"/>
</message>
<message name="GetMaxResourcesForCustomerRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
</message>
<message name="GetMaxResourcesForCustomerResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
</message>
<message name="GetMaxResourcesForCustomerException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException"/>
</message>
<portType name="ServiceConfigurationRules_pt">
<operation name="GetAddActivationConfiguration">
<input message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
<fault name="GetAddActivationConfigurationException" message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</operation>
<operation name="ResourceChangeMigration">
<input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
<output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
<fault name="ResourceChangeMigrationException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
</operation>
<operation name="ResourceChangeMigrationUpgrade">
<input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
<output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
<fault name="ResourceChangeMigrationUpgradeException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
</operation>
<operation name="GetAntenaSenial">
<input message="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
<fault name="GetReasonResponseException" message="ServiceConfigurationRules-v1-0:GetAntenaSenialException"/>
</operation>
<operation name="OrderPayPerViewRule">
<input message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
<output message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
<fault name="OrderPayPerViewRuleException" message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
</operation>
<operation name="GetServiceActivation">
<input message="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
<output message="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
<fault name="ServiceActivationException" message="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
</operation>
<operation name="GetOperationForWOServiceType">
<input message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
<fault message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException" name="GetOperationForWOServiceTypeException"/>
</operation>
<operation name="GetMaxResourcesForCustomer">
<input message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
<fault message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException" name="GetMaxResourcesForCustomerException"/>
</operation>
<operation name="GetBasicProductMigration">
<input message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
<fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="GetBasicProductMigrationException"/>
</operation>
<operation name="CompareResourceTechnology">
<input message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
<output message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
<fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="CompareResourceTechnologyException"/>
</operation>
</portType>
<binding name="ServiceConfigurationRules_ptSOAP11Binding" type="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_pt">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetAddActivationConfiguration">
<soap:operation style="document" soapAction="http://xxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAddActivationConfiguration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetAddActivationConfigurationException">
<soap:fault name="GetAddActivationConfigurationException" use="literal"/>
</fault>
</operation>
<operation name="ResourceChangeMigration">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ResourceChangeMigrationException">
<soap:fault name="ResourceChangeMigrationException" use="literal"/>
</fault>
</operation>
<operation name="ResourceChangeMigrationUpgrade">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigrationUpgrade"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ResourceChangeMigrationUpgradeException">
<soap:fault name="ResourceChangeMigrationUpgradeException" use="literal"/>
</fault>
</operation>
<operation name="GetAntenaSenial">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAntenaSenial"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetReasonResponseException">
<soap:fault name="GetReasonResponseException" use="literal"/>
</fault>
</operation>
<operation name="OrderPayPerViewRule">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/OrderPayPerViewRule"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="OrderPayPerViewRuleException">
<soap:fault name="OrderPayPerViewRuleException" use="literal"/>
</fault>
</operation>
<operation name="GetServiceActivation">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetServiceActivation"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ServiceActivationException">
<soap:fault name="ServiceActivationException" use="literal"/>
</fault>
</operation>
<operation name="GetOperationForWOServiceType">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetOperationForWOServiceType"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetOperationForWOServiceTypeException">
<soap:fault name="GetOperationForWOServiceTypeException" use="literal"/>
</fault>
</operation>
<operation name="GetMaxResourcesForCustomer">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetMaxResourcesForCustomer"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetMaxResourcesForCustomerException">
<soap:fault name="GetMaxResourcesForCustomerException" use="literal"/>
</fault>
</operation>
<operation name="GetBasicProductMigration">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetBasicProductMigration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetBasicProductMigrationException">
<soap:fault name="GetBasicProductMigrationException" use="literal"/>
</fault>
</operation>
<operation name="CompareResourceTechnology">
<soap:operation style="document" soapAction="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/CompareResourceTechnology"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="CompareResourceTechnologyException">
<soap:fault name="CompareResourceTechnologyException" use="literal"/>
</fault>
</operation>
</binding>
<plnk:partnerLinkType name="ServiceConfigurationRules_pt_PL">
<plnk:role name="ServiceConfigurationRules_pt_Role">
<plnk:portType name="tns:ServiceConfigurationRules_pt"/>
</plnk:role>
</plnk:partnerLinkType>
<service name="ServiceConfigurationRules_pt">
<port name="ServiceConfigurationRules_ptPort" binding="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_ptSOAP11Binding">
<soap:address location="http://host:port/soa-infra/services/default/ServiceConfigurationRules/ServiceRules"/>
</port>
</service>
</definitions>
Thank you. -
Intermittent errors - Invoke() could not find the Service name
Users are getting intermittent error : Invoke() could not find the Service name, when opening the Xcelsius dashboards in PRODUCTION. The dashboard has several QAAW queries .These errors are poping up intermittently.
The dashboards are hosted utside the BO environment.
BOXIR3.1
Crystal Xcelsius 2008 EnterpriseAs I continue to look into it, the only thing that I see differently when I am prompted for login is that I can specify the system to log into. I am now wondering if somehow this information is being lost and that is what is causing these issues. Given that the specified name cannot be found and that it does in fact recognize the correct name, I'm not entirely sure what the problem is.
Further information:
If I disable the use of hard-coded logins and I am prompted, I can display results for the onLoad run. Yet the query is also set to refresh on 30 second intervals. On every subsequent interval I am getting this error.
I think this has something to do with sessions. How do I check which sessions exist on my box? CmcApp somewhere?
Edited by: Brian Comeau on Jun 4, 2009 12:24 AM
Checking in CmcApp I found some sessions. Here is what happens:
Login to CmcApp Sessions tab
-Administrator: 1 session at 5:45pm
Launch browser to Xcelsius .swf
Prompted for login information: Administrator/password
-Administrator: 2 sessions at 6:30pm
I had previously set the timeout for sessions in QaaWS to 120 seconds
After 2 minutes
-Administrator: 1 session at 5:45pm
Yet throughout this time, I am still given this "invoke() could not find the service name" error. The name provided "qaawsIncidents" is the same name that I can see if I launch QaaWS.
Ideas?
Edited by: Brian Comeau on Jun 4, 2009 12:30 AM -
Hi,
How to find the service name on which a db link is based.
Thanks.A-K wrote:
I have a dblink in my DB.
But am not able to find the service name on which it was created.
Have multpile entries in my tnsnames.ora
Thanks.Multiple entries for only one tnsname entry? How it's possible? There should be only one entry and tns entries must be distinct -
How does one find out the database name , service name in a database
hi,
how do u find out the database name , service name , SID in a database.
Please reply.
Thanks ,
Regards,
RCThis particular information is available in the view V_$PARAMETER owned by SYS. But you can also login with Server Manager as user INTERNAL and run:
SHOW PARAMETERS
The entries pertaining to the naming of the database are:
1. db_name
2. db_domain
3. db_name
4. instance_name
5. service_names
GLOBAL_NAME is a static (not changing) Data Dictionary view which has just 1 attribute (column) called GLOBAL_NAME.
When you run:
select GLOBAL_NAME from GLOBAL_NAME;
You are returned the full global name of the database, i.e. the db_name and the db_domain joined together by dot (.) For e.g. if your db_name = mgmt and db_domain = tech.co.in, then your global_name will be MGMT.TECH.CO.IN.
Ciao.
null -
How to find the service name (alias)
Hi all,
When I try to 'import' dump, I am getting "TNS:could not resolve service name" error. So, i hope service name given is incorrect. Can I find the correct service name (alias) by querrying any table or searching any file?
Oracle Version : 9.2.0.8.0
Regards,
...You get this error because Oracle can't find it in your tnsnames.ora which is at $ORACLE_HOME/network/admin, or /etc, or /var/opt/oracle, or in %ORACLE_HOME%\network\admin in Windoze.
When there is a syntactical error in your tnsnames.ora you will also get this message.
You could have gathered this from looking up the error in the online documentation, couldn't you?
Sybrand Bakker
Senior Oracle DBA -
Given IP and port number, Is there a way to find the service name?
Hi,
In the Java language, if I am given the IP and the Port number, is there way to lookup the corresponding service name?
thanks, graceThere are a number of standard services by port number. You can get that from /etc/services on any nx system and put it into a map or array. That list doesn't change all that often.
In general though, as Dave says, no.
Assuming the service is not one of the standard ones and the same port may provide different services on different IP addresses, there would need to be some standard protocol for naming services that you could access at those IPs--either a "list of ports/services" service that's at a known port, or a request/response that would be standard across all IPs and ports. As far as I know, neither of those exist. -
Error in Creation of Service Name for Bussiness Service
Hi Friends
I am creating customized Service Program for Bussiness Service which is used for uploading spotbilling data to ccb . The service program CM_Sbm_Upload consists of program com ids CIPBSEGP,CIPMMRDP,CIPTSATP . when i give this to bussiness service i am getting error
Service metainfo missing for 'CM_SBM_UPLOAD'
pls help me to resolve this issue.
Thanks&Regards
sivaramHi,
I've got the same error during my development of a page maintenance service.
Please check if the cm.jar is correctly deployed in your splservice.ear and check also all other deployment directories.
You can find them in the Output window of eclipse after execution of the "Deploy CM" script.
When the cm.jar is deployed well, check if you annotations are correct.
My annotations are looking like this:
* Perform Batch Add.
* @PageMaintenance (secured = false, service = CMIMDIMP,
* body = @DataElement (contents = { @DataField (name = CM_SIMULATION)
* , @DataField (name = XML_REQUEST)}),
* actions = { "change"
* , "read"},
* modules = { "foundation"})
*/To connect a Page Maintenance Service, you must first create a service programm and the "service name" of the service program must match to
the name of the service annotation that you have specified on your Page Maintenance Service, in my case "CMIMDIMP".
There is no validation during the saving of the service programm, the validation happens when you save the Business Service.
BTW. you can use jd-gui.exe to decompile the cm.jar file but you will not see the annotations !
For viewing the ear file I'm using 7-zip. -
WebtopNaming - can not find server name for server ID
We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs. -
How to find table name for the fields from Standard Extractor in CRM system
How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy -
App store:ConnectionManager::invoke::Failed to find service connection url.
I can log into Apple with user name and password but can't log into App Store. Used it earlier to update Aperture.
Now i get this:ConnectionManager::invoke::Failed to find service connection url.Check GateKeeper ...
Open Sysem Preferences > Security & Privacy then select the General tab.
Select: Mac App Store and identified developers
If that area is greyed out, click the padlock icon to make changes. You may be prompted for your admin password.
OS X: About Gatekeeper
If that didn't help, disable anti virus software if installed. Then try logging in.
And try deleting the cache associated with the App Store.
Quit the App Store if it's open.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go then move the Cache.db file to the Trash.
Relaunch the App Store and try logging in.
Maybe you are looking for
-
What's wrong with my multi-threaded Matrix Mult. code? 1 thread is fastest
For some reason, 1 thread performs the best. What's wrong with my implementation? import java.util.Random; import java.util.Date; import java.util.concurrent.ExecutorService; import java.util.concurrent.Executors; import java.util.concurrent.TimeUnit
-
Output errors show up in Firefox but not IE. Is there a way I can disable this?
Hello again! I've been having a bit of a problem where a dialog box comes up in Firefox that shows data that appears in my output when testing the movie in flash. The game works fine, despite the errors that Flash doesn't like in my actionscript. The
-
I used to be able to batch name my photos with a title and then let i-photo put a number after it (like airshow 1, airshow 2.....) Now it won't work it looks like its going through the process but when I check info the photos still have the file name
-
What are Events in NWDS Enterprise Service Repository Perspective?
Hello Experts, does anyone have further information about the artefact "Events" in the context of the attached picture? As far as I know is it not the same as the events in process modelling. Furthermore you can't create an object of the type "Events
-
How to search records using netbeans
i'm using netbeans.....how to search records from database pls help me