Finding similar ideas on the Idea exchange

Ack, I had an idea and went to the idea exchange forum. Was wondering if this idea was already there, not wanting to pollute the forum. A "broken vi" search returned 55 hits. I cannot justify the time reviewing these before adding an idea. I'd like to be able to quickly submit an idea without the stress!

Add a few more keywords to the search.
Alternatively, just post the idea and somebody will very quickly point out if it is a duplicate.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Idea for the IDE

Hi --
I think it would be great if inside the IDE you could
"compile" your movie
and get your code error checked without running the movie.
Right now you can
do the syntax check but sometimes a missing "import", etc.
will generate an
error when you try to "run" the movie, but not when you do a
syntax check.
Rich

Hi --
Yes, I do mean CS3 / AS 3.0.
Thanks
Rich
"David Stiller" <[email protected]> wrote in
message
news:fedsj5$fgk$[email protected]..
> Rich,
>
>> I think it would be great if inside the IDE you
could "compile"
>> your movie and get your code error checked without
running
>> the movie.
>
> In ActionScript 2.0, this is possible with the Check
Syntax button in
> the Actions panel. In ActionScript 3.0 documents, the
liklihood is that
> you'll only get meaningful error messages as you
compile.
>
>> Right now you can do the syntax check but sometimes
a missing
>> "import", etc. will generate an error when you try
to "run" the
>> movie, but not when you do a syntax check.
>
> My hunch is that you're talking about Flash CS3 with an
ActionScript
> 3.0 FLA document (let me know if I'm wrong!). The
relatively vacant
> output of the Check Syntax button is a known issue with
Flash CS3 -- for
> AS3 documents only.
>
>
> David Stiller
> Co-author, Foundation Flash CS3 for Designers
>
http://tinyurl.com/2k29mj
> "Luck is the residue of good design."
>

Got a feature idea? Post your idea or vote on an idea at the ideas site

We have just launched a new site (
http://ideas.acrobat.com) so
that we can hear new ideas and have the community vote on which
ideas are important. Post your idea or vote on an idea. We hope
you’ll check it out.
Thanks,
The Acrobat.com Team
Buzzword is a part of Acrobat.com

The installing groups is actually already implemented in the beta of 2.6, which is in ftp.archlinux.org/other/pacman
From the ChangeLog itself:
Added group handling, so one can run 'pacman -S kde' and
install all files from the KDE group
Not sure about the other things though, those sound like some very good ideas that should be considered and hopefully they aren't too hard to implement.
Kritoke

Change 'Kudos' to 'Votes' on the idea exchange

Sometime I discuss an idea on another platform than the NI forum (Info-LabVIEW, LAVA, real life) and I advise them to vote for a particular idea on the Idea Exchange. For people foreign to the 'Kudos' term it's sounds strange, while calling it 'Votes' makes it more recognizable.
Kudo is a term mainly used on internet and in youth communities, it might be astranging to more serious programmers.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

A use case is found here, where David Ferster made his first post in 8 years to give me moral support after I pointed him to the idea on Info-LabVIEW. What he should have done is make a Kudo to the idea, but being new to the community he didn't knew what to do and did the most natural thing people do on a forum: they post.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Better search/indexing capability for the Idea Exchange Forums

Now that we are getting more ideas posted to the idea exchange it would be helpful if we could have an improved indexing and search capability. This would help to reduce the number of duplicate ideas posted. I know I have ended up posting a couple of duplicates even after searching.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

If you ever have a specific example of the search not finding a related idea, please post it here. When I've gotten feedback about this before and then tried to search myself, it seemed like the related idea always came up. I definitely would like a specific case that I could give to our forum vendor.
I do agree, the Google like feature with misspelled words would be very helpful and I'll pass along that suggestion.
Thanks!
Laura

TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
victor

In reply to Macca7275
We moved from Blackberry to iPhone for 120 services in 2010. We have just renewed the iPhone fleet. Security was the issue for the business that employs me (lawyers). When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models. The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here. Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

HT5625 Upgraded iphone 4 to 5s. Want to use 4 as ipod. DO NOT KNOW APPLE ID FOR 4. When I try to find Apple ID, it finds the id on my ipad and my 5s. I have no idea what the old id is? What are my options?

Help

TheresaDances wrote:
It isn't the same. I can use all the options on the apple site and it finds my new id.
New ID?
Is there some reason you created a new AppleID?
Why don't you simply continue to use the same AppleID you had?
The 4 ID IS something I made up in the store the day I bought the phone. I have no idea what the id is.
You had an iPhone for 2 years and you never got anything from iTunes or never enabled any features of the iPhone?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

Help with "The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36)" Any ideas on how to fix this?

While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

Sun Studio is unable to find a supported version of the NetBeans IDE at the

I'm following the system install instructions in the Grid Compute Utility guide, Appendix A "Building a Local Development Environment" and am getting stuck on step 4, installing sunstudio. I'm running Solaris 5.10 on x86 and can run netbeans IDE without problem. Here is some info, I'm not sure what other system info is relevant:
bash-3.00# which netbeans
/opt/netbeans-5.5.1/bin/netbeans
bash-3.00# which sunstudio
/usr/bin/sunstudio
bash-3.00# sunstudio
Validating NetBeans IDE at: "/opt/SUNWspro/../netbeans-5.5.1"
Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/netbeans-5.5.1 location, if exists
3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
Any help!?

Did you install NetBeans separately or let Sun Studio installer do it? The latter usually results in working configuration.
I think that NetBeans installation simply doesn't have c++ pack; you can install one following usual NetBeans modules installation path and then re-try starting Sun Studio.
Another option is to uninstall NetBeans and re-install Sun Studio using its installer, which should set up NetBeans properly.

I am getting sync problems with Exchange Server and local outlook. Error code is 18439. Does anybody have an idea what the problem might be?

I am using Outlook on my Imac, which is linked to the Windows Exchange Server. All off a sudden I keep receiving messages saying that the message Re: xxxx cannot be synchronized with the exchange server. When I delete the message from my local mail box, all is fine, but after a while another one pops up. The error code is 18493. Does anyone have an idea what could be going wrong???
Thanks for your help already now!

Hello Wolfgang,
I get the same error, but I cannot figure it out too. I hope you or I get some responses back! I do not know why there isnt an edit feature in outlook to acknowledge the individual alarm so it does not alarm again!
Fil

Updated Process for the Ideas Exchange

Hey folks! Spotify Community team here.
If you've been around the Spotify Community for a while, you've probably noticed that we keep tabs on your suggestions for improving Spotify through our Idea Exchange.
In an effort to keep the Idea Exchange as organized and up-to-date as possible, we've changed the way Ideas are submitted. We've outlined the new process with a step-by-step guide below.
We hope that you continue submitting ideas to make Spotify even better. While we can't promise that we'll implement every idea that you submit, but we'll always do our best consider each one and provide updates wherever possible.
The guidelines:
Search for previously submitted ideas. Someone may have already submitted the same idea.
One idea per post. No double dipping.
Ensure the idea is implementable. Avoid posting general feedback or questions in the idea exchange--the more specific the idea the better.
Use an intuitive title.
Submitting a new idea:
1. Go to the Idea Submissions Board.
2. Click the New Idea button.
3. Enter an Idea Subject that includes one of the tags above.
4. In the Body enter a detailed description of your idea, including any screenshots or links you'd like to share.
5. Select one a platform label.
6. Then select a subcategory label.
7. Click Post.
8. One of our Idea Guardians in the Rock Star Program will analyze the idea and mark it either as a "Live Idea" or close it for a specified reason (duplicate idea, unspecified, etc). Allow us to introduce our Idea Guardians: Marco, FredJ, gprocess, Peter, dinomight, Anthony, pnc, Jordi, kbrooksc, Carina, OviiiOne, and Rodrigo.
9. If your idea reaches the Live Idea board it can then start to gain kudos and comments from other users.
10. Once your idea reaches 100+ kudos a Community Manager or Moderator will update the status to one of the following:
The Idea statuses:
New Suggestion (no status/default one): the idea was just posted, it is waiting to be reviewed by an Idea Guardian.
New Idea: this is a new and unique idea, you can add your kudos here.
Inactive Idea: Ideas that could not gather at least 25 kudos per year will get closed - you can submit this idea again if you still feel the topic should get some attention. We recommend changing the title or description if posting the same idea again.
Good Idea, give it some kudos: We like this idea. A decision has not been made but we want to see how much the Community continues to vote on it.
Under Consideration: This has been brought up internally.
Watch this space: This feature is coming. We have a rough pipeline for its release.
Not right now: We talked about this internally and it’s not on our pipeline for the next few months or more.
Case Closed: We talked about it, but we won’t be running with it. Thanks anyway!
Implemented: This feature has rolled out on the specific platform.
Needs more info: We need more clarity or information around this idea from the original poster.
Curious for more information about the Ideas Board? Check out The Ideas Board: How your feedback reaches Spotify.
Thanks for your continued feedback and contributions everyone,
The Spotify Community Team

Ah, yes, now I see it. For those of us with less than perfect vision, how about putting the text in red in the center of the page as opposed to in only slightly darker green to the right. I've never used this page before so I had no idea there even was something to select on the right hand side. Also, the first link in the first post on this page gives me this: "You do not have sufficient privileges for this resource or its parent to perform this action.Click your browser's Back button to continue.Return to my original page"

Getting FIOS Development Team to provide updates on the Idea Exchange

What do we need to do to get the FIOS App Development team to provide updates to the Idea Exchange... We have been trying to get an update on the status of a Windows 8 or Windows Phone 8 App, and no one ever seems to want to respond. It was posted and "acknowledged" back in 2012, with no Verizon update since. Every time someone tries to repost the question, it quickly get's move to the old thread and then ignored by Verizon with no other response...

What do we need to do to get the FIOS App Development team to provide updates to the Idea Exchange... We have been trying to get an update on the status of a Windows 8 or Windows Phone 8 App, and no one ever seems to want to respond. It was posted and "acknowledged" back in 2012, with no Verizon update since. Every time someone tries to repost the question, it quickly get's move to the old thread and then ignored by Verizon with no other response...

HT4759 Just recently had to replace my iPad, backed up my old iPad on iCloud can't find my pictures from the old iPad any ideas?

Just recently had to replace my iPad, backed up my old iPad on iCloud can't find my pictures from the old iPad any ideas?

Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

I have lost my ipad when i try to track it by find my iphone i cant find my ipad on the device any idea?

I have an iphone and ipad
I have lost my ipad,tried to track it by find my iphone but it couldnt find my ipad on the devices so any idea?

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1

Finding similar ideas on the Idea exchange

Similar Messages

Maybe you are looking for