Finding sum for time field in alv

hi gurus.,
          i need to find total hours.. i am using field of data type 'TIMS' ... i converted the value to decimal in ALV and founfd total hours .. i need the total hours in Time format .. how can i achieve this in alv .. its very urgent ...
thanks&regards.,
S.Sivakumar

Hi Shivakumar,
I suggest you not to convert TIMS to Decimal
because it won't give you correct result..
Eg...
Time1 = '11:56:32'
Time2 = '11:50:10'        
now add these two times...
u will get the sum of these as 23:06:42
but in real life... you want the result as 23:46:42
So the better way for getting accurate result is to convert this
HH:MM:SS to Seconds
and then sum these seconds
then again convert it to HH:MM:SS
1 hr = 3600 sec
1 min = 60 sec
Hope it will solve your problem...
Reward points if useful...
Thanks & Regards
ilesh 24x7

Similar Messages

  • SUM for a field in ALV

    Hello Guys,
    CAn any one tell me how to do the SUM for a particular column in ALV.It should display at the End of the records.The column field is TYPE N(4).
    My CODE is like this:
    CLEAR fc_tmp.
      fc_tmp-col_pos         =  5.
      fc_tmp-reptext_ddic    = 'POINTS'.
      fc_tmp-fieldname       = 'POINTS'.
      fc_tmp-tabname         = 'ITAB'.
      fc_tmp-outputlen       = 15.
      fc_tmp-key             = 'X'.
      fc_tmp-do_sum          = 'X'.
      APPEND fc_tmp TO fieldcat.
    This is not working.
    Thanks in Advance,
    Take care

    Hi,
    populate the IT_SORT internal table of REUSE_ALV_GRID_DISPLAY provided in the importing parameters.
    fieldname = Company Code
    append fieldname to it_sort.
    fieldname = division.
    append fieldname to it_sort.
    If you explicitly need subtotals then add the following line
    subtot = 'X'
    For obtaining sum you have an attribute "do_sum" in fieldcatalog , set it to 'X' and you should be able to do sum on that field.
    <b>Ensure that these should be numeric / currency or quantity datatypes only.</b>
    wa_fieldcat-datatype = 'CURR'.   or
    wa_fieldcat-datatype = 'QUAN'.
    Hope this solves your problem
    Cheers,
    Simha.
    PS : Please reward points if solution is helpful

  • How can we sum for the field on alv grid

    Dear Freinds,
                   I am having the field count .....in the ouput (iam using alv grid) .......which dispalys  the id's which are identical .
    i have scneario similar to the below in my ALV Output
    ID                count         total
    4000              3              100
                                          100
                                         200       Can i get count 3 also along with 200 in alv?
    i am using the code as follows for count can any one please let me know.
    my earlier question which i put was confusing.........so i am givin the qustion again
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 1.
      ls_fieldcat-fieldname    = 'ORGUNIT'.
      ls_fieldcat-seltext_l    =  text-015.  "'Orgunit'.
      ls_fieldcat-key          = 'X'.
      ls_fieldcat-key_sel      = 'X'.
    ls_fieldcat-no_out       = 'X'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 2.
      ls_fieldcat-fieldname    = 'COUNT'.
      ls_fieldcat-seltext_l    = 'H.Count'.
      ls_fieldcat-outputlen    = 4.
      ls_fieldcat-do_sum       = 'X'.
    ls_fieldcat-datatype    = 'NUMC'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname   = 'TOTAL'.
      ls_fieldcat-seltext_m   = 'total'.
      ls_fieldcat-col_pos     = 3.
      ls_fieldcat-outputlen   = 17.
      ls_fieldcat-do_sum      = 'X'.
      ls_fieldcat-datatype    = 'CURR'.
      append ls_fieldcat to fp_i_fieldcat.
    Please let me know how can do if so what is the parameter i have to change for COUNT
    regards
    syamal

    Hi Shamala Kiran.
                          My name is also kiran.I have a develop a code for u.Actually i cant understand your code.But i know ur problem .Plz check that code.In that code i develop a subtotals and grandttotal.Plz observe the FORM "FIELD CATALOG" in that observe the NETWR FIELD and observe the FORM SORTCATALOG then ur problem will be solved.
    Copy the the below code and execute that code and the result.
    If u r Satisfied with the answer plz give the REWARD POINTS.
    CODE:
    Type Pools
    TYPE-POOLS:slis.
    Tables
    TABLES: vbak,vbap.
    Global Variable
    data: w_var type i.
    Global Data
    DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
         wa_fieldcat TYPE slis_fieldcat_alv,
         it_sortcat TYPE slis_t_sortinfo_alv,
         wa_sortcat  LIKE LINE OF it_sortcat.
    Internal Table
    data: BEGIN OF it_salesorder OCCURS 0,
            vbeln LIKE vbak-vbeln,    " Sales Document Number
            posnr like vbap-posnr,    " Sales Doc Item
            netwr like vbap-netwr,    " Net Value
          END OF it_salesorder.
    SELECT OPTIONS
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.   " Sales Document Number.
    SELECTION-SCREEN END OF BLOCK b1.
    Initialization
    INITIALIZATION.
      PERFORM initialization.
    *&      Form  initialization
          text
    -->  p1        text
    <--  p2        text
    form initialization .
      s_vbeln-sign   = 'I'.
      s_vbeln-option = 'BT'.
      s_vbeln-low    = '4969'.
      s_vbeln-high   = '5000'.
      APPEND s_vbeln.
    endform.                    " initialization
    Start Of Selection
    START-OF-SELECTION.
      PERFORM field_catalog.   "For Structure Creation
      PERFORM fetch_data.      "Get the Data From DB Table
      PERFORM sorting USING it_sortcat.
    End Of Selection
    END-OF-SELECTION.
      perform display_data.
    *&      Form  field_catalog
          text
    -->  p1        text
    <--  p2        text
    form field_catalog .
      wa_fieldcat-col_pos       = w_var.          " Column Position Variable
      wa_fieldcat-tabname       = 'IT_SALESORDER'. " Internal Table Name
      wa_fieldcat-fieldname     = 'VBELN'.         " Field Name
      wa_fieldcat-key           = 'X'.             " Blue Color
      wa_fieldcat-ref_tabname   = 'VBAK'.          " Table Name
      wa_fieldcat-ref_fieldname = 'VBELN'.         " Field Name
      wa_fieldcat-seltext_m     = 'Sales Doc No'.  " Display Text In Screen
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      ADD 1 TO w_var.
      wa_fieldcat-col_pos       = w_var.          " Column Position Variable
      wa_fieldcat-tabname       = 'IT_SALESORDER'. " Internal Table Name
      wa_fieldcat-fieldname     = 'POSNR'.         " Field Name
      wa_fieldcat-ref_tabname   = 'VBAP'.          " Table Name
      wa_fieldcat-ref_fieldname = 'POSNR'.         " Field Name
      wa_fieldcat-seltext_m     = 'Sales Doc Item'. " Display Text In Screen
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      ADD 1 TO w_var.
      wa_fieldcat-col_pos       = w_var.          " Column Position Variable
      wa_fieldcat-tabname       = 'IT_SALESORDER'. " Internal Table Name
      wa_fieldcat-fieldname     = 'NETWR'.         " Field Name
      wa_fieldcat-ref_tabname   = 'VBAP'.          " Table Name
      wa_fieldcat-ref_fieldname = 'NETWR'.         " Field Name
      wa_fieldcat-do_sum        = 'X'.             " Sum
      wa_fieldcat-seltext_m     = 'Net Value'.  " Display Text In Screen
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      ADD 1 TO w_var.
    endform.                    " field_catalog
    *&      Form  sorting
          text
         -->P_IT_SORTCAT  text
    form sorting using p_it_sortcat TYPE slis_t_sortinfo_alv.
      wa_sortcat-fieldname = 'VBELN'.
      wa_sortcat-up        ='X'.
      wa_sortcat-subtot    = 'X'.
      APPEND wa_sortcat TO p_it_sortcat.
    endform.                    " sorting
    *&      Form  display_data
          text
    -->  p1        text
    <--  p2        text
    form display_data .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                   = ' '
        I_CALLBACK_PROGRAM                = SY-REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
        IT_FIELDCAT                       = it_fieldcat
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
        IT_SORT                           = it_sortcat
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = it_salesorder
    EXCEPTIONS
       PROGRAM_ERROR                     = 1
       OTHERS                            = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    endform.                    " display_data
    *&      Form  fetch_data
          text
    -->  p1        text
    <--  p2        text
    form fetch_data .
    select a~vbeln
           posnr
           b~netwr
      from vbak as a
    inner join vbap as b on  avbeln = bvbeln
      into table it_salesorder
      where a~vbeln in s_vbeln.
    endform.                    " fetch_data

  • Sum of a field in ALV List

    Hello Guys,
    I'm using 'REUSE_ALV_GRID_DISPLAY' in my prog.
    There is a field in output table which is of type P(8) Decimals 3.
    When I'm trying to get the sum of this field in ALV Display it gives the message " Desired operation cannot be performed for column 'Converted Quantity' ".
    I have also tried do_sum = 'X'.
    But it is not working. Please help guys.
    Regards,
    Abhinav

    Thanks a lot guys for your inputs.
    The program is working now.
    Now I'm using :
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'QUAN'.
    *  wa_fieldcat-ref_tabname = 'I_OUT2'.
    *  wa_fieldcat-tabname = 'I_OUT2'.
      wa_fieldcat-qfieldname = 'MEAS'.
      wa_fieldcat-qtabname = 'I_OUT2'.
      wa_fieldcat-outputlen = '15'.
      wa_fieldcat-seltext_l = text-052.
      APPEND wa_fieldcat TO i_fieldcat.
    The program is working fine now.
    I have commented tabname and -ref_tabname , and the program is working fine now.
    Thanks a lot.

  • How to add a search help for a field in alv?

    HI!Everyone ,
    i want to add a search help created by myself for one field in alv,
    and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
    can anyone help me ?
    thanks!

    HI,Vijay.
    My code like this :
          PERFORM build_fcat.
          PERFORM build_objects.
          PERFORM layo_build.
          PERFORM set_drdn_table .
          CALL METHOD alv_grid->set_table_for_first_display
            EXPORTING
             i_structure_name = 'STU_S'
              is_layout        = s_layo
            CHANGING
              it_outtab        = itab_out
            it_fieldcatalog  = i_fcat
            ."Period
          IF sy-subrc <> 0.
            EXIT.
          ENDIF.
    for example, there is a field 'UNAME' IN Structure 'STU_S',
    i want to add a search help for 'UNAME'.
    the 'UNAME'  is not users in SAP R/3 , i want to add some data by myself or from a table .

  • Add List box for one field in ALV GRID

    Hi All,
      I need to add drop down list box for one field in ALV Grid.
      If any body knows, please help.
    Thanks in advance.
    Regards
    Manglesh

    Hi,
    Here is the ex where i have used for date parameter in the sel screen
    type-pools: vrm.
    data: name type vrm_id,
          list type vrm_values,
          value like line of list.
    parameters :    p_date like p_date2
                                  as listbox visible length 15.
    at selection-screen output.
      name = 'P_DATE'.
      value-key = '1'.
      value-text = 'Today'.
      append value to list.
      value-key = '2'.
      value-text = 'Last 7 days'.
      append value to list.
      value-key = '3'.
      value-text = 'Last 30 days'.
      append value to list.
      value-key = '4'.
      value-text = 'Last 90 days'.
      append value to list.
      value-key = '5'.
      value-text = 'Last year'.
      append value to list.
    Call the ''VRM_SET_VALUES' to display the values in Listbox
      call function 'VRM_SET_VALUES'
        exporting
          id     = name
          values = list.
    at selection-screen.
      if sy-ucomm = 'CLI1'.
        sscrfields-ucomm = 'ONLI'(001).
      endif.
      if p_date = '1'.
        p_date11 =  sy-datum .
      elseif p_date = '2'.
        p_date11 = ( sy-datum - 7 ).
      elseif p_date = '3'.
        p_date11 = ( sy-datum - 30 ).
      elseif p_date = '4'.
        p_date11 = ( sy-datum - 90 ).
      elseif p_date = '5'.
        p_date11 = ( sy-datum - 365 ).
      endif.
    Hope this helps u..
    Please reward points if useful.
    Regards,
    Sreenivas

  • F4 help for Time field in Webdynpro Screen

    Hi Experts,
    I'm using TIMS data type for my Time field. In ECC we will have F4 function for the same data element, but in Webdynpro screen, am not getting the F4 help.
    I got some information from SCN that I need to go for some custom search help. But with which reference to the table, am I want to create it.
    Please let me know, is there any other possible way to create F4 for time field for webdynpro.
    Even I tried to use some standard search help, but am getting an error as 'Sending of dynpro ' ' not possible. No window system type specified'.
    Expecting valuable information from you experts.
    With Regards,
    RAM.

    Hi RAM,
    For time field, there is no SAP delivered search help in WDA , so we need to go for freely programmed search help.
    Please refer the below link, in which Mr. Thomas, has provided the links for search help document you can follow and create new search help component
    and also nugget of the component which can be imported using ZSAPLINK program.
    search help for time
    Regards,
    Rama

  • How to pass custom search help(F4 help) for a field in ALV output?

    Hi,
    I want to activate the F4 help in ALV output for a field for which we do not have search help assigned at table ,data element and domain level.
    In field catalog i have enabled it by below line.
    ls_fcat-F4AVAILABL = 'X'.
    but because there are no standard input help available it is giving message as "No input help is available".
    so how to pass our custom search help (g_search) for any field in ALV output.
    I am using object oriented ALV grid display.
    Thanks!!!
    Rajesh Gupta.

    hi,
    check this out:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/acdefb13-0701-0010-f1a2-8eeefa7d3780
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d?quicklink=index&overridelayout=true

  • F4 help for Time field in webdynpro abap

    Hi Guru's,
    how to get f4 help for time field in webdynpro abap.
    thanks in advance,
    narendra

    Hi Narendra,
    Check this link:
    Re: Time Search Help
    Also few more links here:
    http://forumsa.sdn.sap.com/search.jspa?forumID=249&threadID=&q=time+help&objID=f249&dateRange=lastyear&numResults=15&rankBy=10001
    Also check if this example helps you: WDR_TEST_HELP
    If your query is not yet answered then its advisable to post in webdynpro for abap (Web Dynpro ABAP). You may get some quick repliy.
    Regards,
    Swarna Munukoti.

  • Search Help in Select - Options for Time field

    Hi,
    I have a select option which is a  time field.
    For date field the F4 help is automatically generated.
    How to get F4 help for time field.
    Regards,
    Remo

    Selection-Options or normal field - it doesn't matter.  There is no system delivered value help for a time field. This is documented in the online help:
    There is no automatic F4 help for data element TIMS.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
    You would have to create your freely programmed value help if you want something like the time value help available in the SAPGUI.

  • How to add F1 help for a field on ALV grid

    Hi All,
    When we execute a program, the output is displayed using ALV grid.
    on the ALV grid, if we press F1 on a field, it should popup the help document.
    How to add F1 help for a field on ALV grid.
    Thank you all in advance.

    fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
    A.

  • Dump when summing up CURR field in ALV GRID display

    Hi All,
    I am getting dump when I try to sum the CURR field in my ALV Grid Display. The field is of CURR 23.  I am using classes and methods to display alv grid.
    I tried passing <fs_fieldcat>-do_sum = 'X'. When I did this, it is dumping without even displaying the alv grid.
    Here is the part it is throwing dump:
            ls_lvc_data-value = space.
            clear ls_lvc_data-style.
            loop at it_fcat_local assigning <ls_fcat>
                    where tech ne 'X' and no_out ne 'X'.
              if l_invisible eq 'X'.
                clear l_invisible.
                if <ls_fcat>-do_sum is initial.
                  continue.
                else.
                  clear ls_lvc_data-col_pos.
                endif.
              endif.
              add 1 to ls_lvc_data-col_pos.
              assign component <ls_fcat>-fieldname
                               of structure <ls_data> to <l_field_value>.
              _if sy-subrc ne 0.
                message x000(0k).
              endif._
    Regards,
    Guru

    Thomas,
    Here is the dump:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          10/22/2010 23:30:53
    Short text
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    Error analysis
    Short text of error message:
    Long text of error message:
    Technical information about the message:
    Message class....... "0K"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLSLVC" or "LSLVCF36"
    "FILL_DATA_TABLE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Source Code Extract
    Line
    SourceCde
    2708
    is_subtottxt_info = ls_subtot_info
    2709
    ip_subtot_line    = lr_data
    2710
    changing
    2711
    c_subtottxt       = l_subtottxt.
    2712
    ls_lvc_data-value = l_subtottxt.
    2713
    2714
    append ls_lvc_data to ct_lvc_data.
    2715
    endif.
    2716
    2717
    2718
    Column per Fieldcat Entry
    2719
    2720
    ls_lvc_data-value = space.
    2721
    clear ls_lvc_data-style.
    2722
    loop at it_fcat_local assigning <ls_fcat>
    2723
    where tech ne 'X' and no_out ne 'X'.
    2724
    if l_invisible eq 'X'.
    2725
    clear l_invisible.
    2726
    if <ls_fcat>-do_sum is initial.
    2727
    continue.
    2728
    else.
    2729
    clear ls_lvc_data-col_pos.
    2730
    endif.
    2731
    endif.
    2732
    2733
    add 1 to ls_lvc_data-col_pos.
    2734
    2735
    assign component <ls_fcat>-fieldname
    2736
    of structure <ls_data> to <l_field_value>.
    2737
    if sy-subrc ne 0.
    >>>>>
    message x000(0k).
    2739
    endif.
    2740
    2741
    *... work on average
    2742
    if <ls_fcat>-do_sum eq 'C'.
    2743
              Initialize average result and entries
    2744
    <l_field_value> = 0.
    2745
    clear l_entries.
    2746
    2747
              retrive unit from fieldcatalog
    2748
    assign space to <l_unit>.
    2749
    if not <ls_fcat>-cfieldname is initial.
    2750
    assign component <ls_fcat>-cfieldname
    2751
    of structure <ls_data> to <l_unit>.
    2752
    endif.
    2753
    if not <ls_fcat>-qfieldname is initial.
    2754
    assign component <ls_fcat>-qfieldname
    2755
    of structure <ls_data> to <l_unit>.
    2756
    endif.
    2757

  • Average sum for a column in ALV tree layout

    Hi,
    I've trying to set an average sum for a column in an ALV tree report.  In the field catalog i set the DO_SUM field to 'X' and this will do a total sum, but I can't find out how in the code to do the average sum.
    Also to get round this I was going to just set a default display variant with the "average" sum option saved after i had manually selected the columns and set it to this.  Problem with this is that when i re-run it, the sum comes back as a total rather than an average.  I have tried setting display variants on the SAP example ALV tree programs and the same thing happens.
    Does anyone know how i can get round this?
    Cheers
    Matt.

    Hi,
    In addition to setting DO_SUM = 'X' you need to specify function in H_FTYPE field. It should be set to 'AVG' in your case.
    ls_fielcat-do_sum = 'X'.
    ls_fieldcat-h_ftype = 'AVG.

  • Negative sign for DMBTR field in ALV output

    Hi Experts,
    Before posting I have searched for more than 3 hours in the forums to get a solution for this.
    I did not get any solution so I am posting this problem which I need to resolve.
    I have to display the DMBTR field in ALV output for which a grand total will have to be displayed.
    Here for all the values in DMBTR which are negative are getting displayed as '-        6673.56','-       289956.23' as I am using the edit mask 'V_____________.__'.
    I have to get the value shown as '-6673.56', '-289956.23'.
    I tried to use convert this DMBTR to String and have successfully displayed the negative sign correctly in front of the value but I am not getting the totals which I need to have
    PLease check and suggest for a solution.
    Regards
    Kishore

    Hi,
      If this is the case, then you can use character field to display the sign on the left. Sum up the total and use the event end of list to display the same. Remember to set the TECH and NO_OUT in the field catalog.
    Hope this helps.
    Regards,
    Siva

  • F4 for Editable field in ALV, display Name but capture ID

    Hi Friends,
    I have a ALV for which i have defined a Structure, which is passed to Fieldcatlog.
    I have defined a Search help - ZUSER_NAME which has following fields to display.
    USERID - USR02-BNAME
    FNAME
    LNAME
    FULLNAME
    So my structure for fieldcatalog has User-id which is linked to this search help with Domain XUBNAME.
    So in my report i made this User-Id as editable and F4 available, everything is working fine.
    when user does a F4, its displaying Userid,Fname,Lname and complete name.upon selection and save i am capturing the id and storing in the ztable.
    But now i have a requirement that when user selects a value from this search help on F4, i need to display Fullname but capture the User Id. How can i do that?
    This is something similar to the one we have in BSP- key-value pair.
    how to do this in ALV.
    Appreciate if someone can guide me thru.
    Thanks,
    Simha
    Edited by: Simha on Sep 6, 2008 2:24 PM

    hai ,  this is example code for editing the F4 display .. check out this
    REPORT zalv_editf4display.
    *Type pools for alv
    TYPE-POOLS : slis.
    *structure for t582a tbale
    TYPES : BEGIN OF ty_table,
            infty TYPE infty,
            pnnnn TYPE pnnnn_d,
            zrmkz TYPE dzrmkz,
            zeitb TYPE dzeitb,
            dname TYPE dianm,
             davo TYPE davo,
            davoe TYPE davoe,
            END OF ty_table.
    *Structure for infotype text
    TYPES : BEGIN OF ty_itext,
            infty TYPE infty,
            itext TYPE intxt,
            sprsl TYPE sprsl,
            END OF ty_itext.
    *Structure for output display
    TYPES : BEGIN OF ty_output,
            infty TYPE infty,
            itext TYPE intxt,
            pnnnn TYPE pnnnn_d,
            zrmkz TYPE dzrmkz,
            zeitb TYPE dzeitb,
            dname TYPE dianm,
            davo TYPE davo,
            davoe TYPE davoe,
           END OF ty_output.
    *internal table and work area declarations
    DATA : it_table TYPE STANDARD TABLE OF ty_table INITIAL SIZE 0,
           it_output TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
           it_pbo TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
           it_ittext TYPE STANDARD TABLE OF ty_itext INITIAL SIZE 0,
           wa_table TYPE ty_table,
           wa_output TYPE ty_output,
           wa_ittext TYPE ty_itext.
    *Data declarations for dropdown lists for f4
    DATA: it_dropdown TYPE lvc_t_drop,
          ty_dropdown TYPE lvc_s_drop,
    *data declaration for refreshing of alv
          stable TYPE lvc_s_stbl.
    *Global variable declaration
    DATA: gstring TYPE c.
    *Data declarations for ALV
    DATA: c_ccont TYPE REF TO cl_gui_custom_container,         "Custom container object
          c_alvgd         TYPE REF TO cl_gui_alv_grid,         "ALV grid object
          it_fcat            TYPE lvc_t_fcat,                  "Field catalogue
          it_layout          TYPE lvc_s_layo.                  "Layout
    *ok code declaration
    DATA:
      ok_code       TYPE ui_func.
    *initialization event
    INITIALIZATION.
    *start of selection event
    START-OF-SELECTION.
    *select the infotypes maintained
      SELECT infty
              pnnnn
              zrmkz
              zeitb
              dname
              davo
              davoe
              FROM t582a UP TO 10 ROWS
              INTO CORRESPONDING FIELDS OF TABLE it_table.
    *Select the infotype texts
      IF it_table[] IS NOT INITIAL.
        SELECT itext
                 infty
                 sprsl
                 FROM t582s
                 INTO CORRESPONDING FIELDS OF TABLE it_ittext
                 FOR ALL ENTRIES IN it_table
                 WHERE infty = it_table-infty
                 AND sprsl = 'E'.
      ENDIF.
    *Apppending the data to the internal table of ALV output
      LOOP AT it_table INTO wa_table.
        wa_output-infty = wa_table-infty.
        wa_output-pnnnn = wa_table-pnnnn.
        wa_output-zrmkz = wa_table-zrmkz.
        wa_output-zeitb = wa_table-zeitb.
        wa_output-dname = wa_table-dname.
        wa_output-davo = wa_table-davo.
        wa_output-davoe = wa_table-davoe.
    For texts
        READ TABLE it_ittext INTO wa_ittext WITH KEY infty = wa_table-infty.
        wa_output-itext = wa_ittext-itext.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
      ENDLOOP.
    Calling the ALV screen with custom container
      CALL SCREEN 0600.
    *On this statement double click  it takes you to the screen painter SE51.
    *Enter the attributes
    *Create a Custom container and name it CCONT and OK code as OK_CODE.
    *Save check and Activate the screen painter.
    *Now a normal screen with number 600 is created which holds the ALV grid.
    PBO of the actual screen ,
    Here we can give a title and customized menus
    *create 2 buttons with function code 'SAVE' and 'EXIT'.
    GIVE A SUITABLE TITLE
    *&      Module  STATUS_0600  OUTPUT
          text
    MODULE status_0600 OUTPUT.
      SET PF-STATUS 'DISP'.
      SET TITLEBAR 'ALVF4'.
    ENDMODULE.                 " STATUS_0600  OUTPUT
    calling the PBO module ALV_GRID.
    *&      Module  PBO  OUTPUT
          text
    MODULE pbo OUTPUT.
    *Creating objects of the container
      CREATE OBJECT c_ccont
           EXPORTING
              container_name = 'CCONT'.
    create object for alv grid
      create object c_alvgd
      exporting
      i_parent = c_ccont.
    SET field for ALV
      PERFORM alv_build_fieldcat.
    Set ALV attributes FOR LAYOUT
      PERFORM alv_report_layout.
      CHECK NOT c_alvgd IS INITIAL.
    Call ALV GRID
      CALL METHOD c_alvgd->set_table_for_first_display
        EXPORTING
          is_layout                     = it_layout
          i_save                        = 'A'
        CHANGING
          it_outtab                     = it_output
          it_fieldcatalog               = it_fcat
        EXCEPTIONS
          invalid_parameter_combination = 1
          program_error                 = 2
          too_many_lines                = 3
          OTHERS                        = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDMODULE.                 " PBO  OUTPUT
    *&      Form  alv_build_fieldcat
          text
         <--P_IT_FCAT  text
    *subroutine to build fieldcat
    FORM alv_build_fieldcat.
      DATA lv_fldcat TYPE lvc_s_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '1'.
      lv_fldcat-fieldname = 'INFTY'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 8.
      lv_fldcat-scrtext_m = 'Infotype'.
      lv_fldcat-icon = 'X'.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '2'.
      lv_fldcat-fieldname = 'PNNNN'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 15.
      lv_fldcat-scrtext_m = 'Structure'.
      lv_fldcat-icon = ''.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '3'.
      lv_fldcat-fieldname = 'ITEXT'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 60.
      lv_fldcat-scrtext_m = 'Description'.
      lv_fldcat-icon = ''.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '5'.
      lv_fldcat-fieldname = 'ZRMKZ'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 1.
      lv_fldcat-scrtext_m = 'PERIOD'.
      lv_fldcat-icon = ''.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '6'.
      lv_fldcat-fieldname = 'ZEITB'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 5.
      lv_fldcat-scrtext_m = 'Time constraint'.
      lv_fldcat-edit = 'X'.
    *To avail the existing F4 help these are to
    *be given in the field catalogue
      lv_fldcat-f4availabl = 'X'.
      lv_fldcat-ref_table = 'T582A'.
      lv_fldcat-ref_field = 'ZEITB'.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '7'.
      lv_fldcat-fieldname = 'DNAME'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 15.
      lv_fldcat-scrtext_m = 'Dialogmodule'.
      lv_fldcat-icon = ''.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '8'.
      lv_fldcat-fieldname = 'DAVO'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 15.
      lv_fldcat-scrtext_m = 'Start'.
      lv_fldcat-edit = 'X'.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
      lv_fldcat-row_pos   = '1'.
      lv_fldcat-col_pos   = '9'.
      lv_fldcat-fieldname = 'DAVOE'.
      lv_fldcat-tabname   = 'IT_OUTPUT'.
      lv_fldcat-outputlen = 15.
      lv_fldcat-scrtext_m = 'End'.
      lv_fldcat-icon = ''.
      APPEND lv_fldcat TO it_fcat.
      CLEAR lv_fldcat.
    *To create drop down for the field 'DAVO'
    with our own f4 help
      ty_dropdown-handle = '1'.
      ty_dropdown-value = ' '.
      APPEND ty_dropdown TO it_dropdown.
      ty_dropdown-handle = '1'.
      ty_dropdown-value = '1'.
      APPEND ty_dropdown TO it_dropdown.
      ty_dropdown-handle = '1'.
      ty_dropdown-value = '2'.
      APPEND ty_dropdown TO it_dropdown.
      ty_dropdown-handle = '1'.
      ty_dropdown-value = '3'.
      APPEND ty_dropdown TO it_dropdown.
      CALL METHOD c_alvgd->set_drop_down_table
        EXPORTING
          it_drop_down = it_dropdown.
      LOOP AT it_fcat INTO lv_fldcat.
        CASE lv_fldcat-fieldname.
    To assign dropdown in the fieldcataogue
          WHEN 'DAVO'.
            lv_fldcat-drdn_hndl = '1'.
            lv_fldcat-outputlen = 15.
            MODIFY it_fcat FROM lv_fldcat.
        ENDCASE.
      ENDLOOP.
    ENDFORM.                    " alv_build_fieldcat
    *&      Form  alv_report_layout
          text
         <--P_IT_LAYOUT  text
    *Subroutine for setting alv layout
    FORM alv_report_layout.
      it_layout-cwidth_opt = 'X'.
      it_layout-col_opt = 'X'.
      it_layout-zebra = 'X'.
    ENDFORM.                    " alv_report_layout
    PAI module of the screen created. In case we use an interactive ALV or
    *for additional functionalities we can create OK codes
    *and based on the user command we can do the coding.
    *&      Module  PAI  INPUT
          text
    MODULE pai INPUT.
    *To change the existing values and refresh the grid
    *And only values in the dropdown or in the default
    *F4 can be given , else no action takes place for the dropdown
    *and error is thrown for the default F4 help and font changes to red
    *and on still saving, value is not changed
      c_alvgd->check_changed_data( ).
    *Based on the user input
    *When user clicks 'SAVE;
      CASE ok_code.
        WHEN 'SAVE'.
    *A pop up is called to confirm the saving of changed data
          CALL FUNCTION 'POPUP_TO_CONFIRM'
            EXPORTING
              titlebar       = 'SAVING DATA'
              text_question  = 'Continue?'
              icon_button_1  = 'icon_booking_ok'
            IMPORTING
              answer         = gstring
            EXCEPTIONS
              text_not_found = 1
              OTHERS         = 2.
          IF sy-subrc NE 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    *When the User clicks 'YES'
          IF ( gstring = '1' ).
            MESSAGE 'Saved' TYPE 'S'.
    *Now the changed data is stored in the it_pbo internal table
            it_pbo = it_output.
    *Subroutine to display the ALV with changed data.
            PERFORM redisplay.
          ELSE.
    *When user clicks NO or Cancel
            MESSAGE 'Not Saved'  TYPE 'S'.
          ENDIF.
    **When the user clicks the 'EXIT; he is out
        WHEN 'EXIT'.
          LEAVE PROGRAM.
      ENDCASE.
      CLEAR: ok_code.
    ENDMODULE.                 " PAI  INPUT
    *&      Form  REDISPLAY
          text
    -->  p1        text
    <--  p2        text
    FORM redisplay .
    *Cells of the alv are made non editable after entering OK to save
      CALL METHOD c_alvgd->set_ready_for_input
        EXPORTING
          i_ready_for_input = 0.
    *Row and column of the alv are refreshed after changing values
      stable-row = 'X'.
      stable-col = 'X'.
    *REfreshed ALV display with the changed values
    *This ALV is non editable and contains new values
      CALL METHOD c_alvgd->refresh_table_display
        EXPORTING
          is_stable = stable
        EXCEPTIONS
          finished  = 1
          OTHERS    = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " REDISPLAY

Maybe you are looking for