Finding taking pics very difficult

Since i bought this c7, i have been enjoying it. I wanted to buy nokia N8 but after reading several complaints about nokia N8 in this forum i decided to buy nokia c7 which have less complaint from users . I thank God that i bought this phone without bowing to pressure from friends for me to buy iphone. But recently i started having problem with taking pictures. Whenever i want to take pics, it demands that internet and bluetooth must be on. If i take no. It will not allow me to take the pics. If i take yes ,it will allow for few minutes but will start to demand again. In short, i am finding it too difficult to take photos with my phone because of frequent demand to connect to internet and bluetooth. I need urgent help.

Hi,
It sounds like the camera is trying to connect to your operator because the Save location info in settings is on. Press the button to open the camera app. press options, press settings, check that Save location info is set to no. You also need to check this setting when you switch to video mode. Hope this solves the problem.
All the best

Similar Messages

How can I restore my playlist folders in itunes? They are there but the individual song titles aren't listed. They are only listed by album. This makes it very difficult to find songs in my playlist. Also,when I click on music, it will not list options.

My itunes account is messed up. How can I restore my playlist folders in itunes? The list's are there but the individual song titles aren't. They are only listed by album. I can only see the song titles as they are played at the top of my itunes. This makes it very difficult to find songs in my playlist. Also when in the itunes store, I am not able to see music genre choices, or search for a song or group.
Thank you

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hi Tomiwa,
You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

HT1657 I rented Heminway's garden of Eden. Film only works for 3 minutes. It is very difficult to find help . I feel this fraudulent itunes behavior?

I rented the film Heminways's Garden of Eden. It only works 2 - 3 minutes . My card has been already charged.
Can someone please fw to an official itunes staff ? .
Apple / itunes websites are very difficult to navigate regarding contacting staff for purchases / itunes rentals that dont work.
This feels like fraudulent behavior.
Please advice
Thank you

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

How to make each playlist for each movie songs ? when i tried to add songs all movie songs comes in row , its very difficult to find which movie song belongs?

how to make each playlist for each movie songs ? when i tried to add songs all movie songs comes in row , its very difficult to find which movie song belongs?

Thank you! I put some self help hypnosis tracks to listen to on my iPod. I did not want to go to the next track automatically, I wanted to listen to them individually, one at a time. (If I fell asleep, I did not want to 'wake up' in the middle of a different track.) Your information helps me understand that I need to re-load this playlist onto my iPod from my Mac computer, only first, I need to UNCHECK the boxes in front of each track so the iPod will STOP each time after playing the selected track. It is too bad that so many functions are not availabvle within the iPod, but that is probably why they can make it so compact.

My problem is the graphs of my audio recordings in the arrange window are so small it makes accurate editing very difficult.

My problem is the graphs of my audio recordings in the arrange window are so small it makes accurate editing very difficult.

Try the waveform zoom slider. Recording louder just to get a better visible waveform would be, well, silly.
From the manual: (click on links to see pics)
To change the zoom level using the Waveform Zoom button
Click-hold the Waveform Zoom button. A slider appears.
http://documentation.apple.com/en/logicpro/usermanual/Art/S01/S0185_WaveZoom.png
Drag the slider. As you do, the waveform shown in all audio regions, and in the Beat Mapping track, is increased or decreased in size.
http://documentation.apple.com/en/logicpro/usermanual/Art/S09/S0931_CUS_Waveform Zoom2.png
Note: This is a purely visual function. The amplitude (level) of the waveform is not affected.
it's here (scroll 3/4 down):
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=4%26sec tion=6%26tasks=true

TDMS Shell - DB Export from source/sender system taking a VERY long time

We're trying to build a TDMS Receiver system using the TDMS Shell technique. We've run into a situation wherein the initial DB Export from source/sender system is taking a VERY long time.
We are on ECC 6.0, running on AIX 6.1 and DB UDB v9.7. We're executing the DB export from sapinst, per instructions. Our DB export parallelizes, then the parallel processes one by one whittle away to just one remaining, and there we find out that the export is at that point single-threaded, and exporting table BSIS.
BSIS is an FI transactional data table. We're wondering why is the DB export trying to get BSIS and its contents out??? Isn't the DB export in TDMS Shell technique only supposed to get SAP essential only config and master data, and NOT transactional data?
Our BSIS table is nearly 700 GB in size by itself. That export has been running for nearly a week now, with no end in site.
What are we doing wrong? We suspect we may have missed something, but really don't think we do. We also suspect that the EXCLUSION table in the TDMS Shell technique may be the KEY to this whole thing. It's supposed to automatically exclude very large tables, but in this case, it most certainly missed out in excluding BSIS for some reason.
Anyway, we're probably going to fire up an OSS Message with SAP Support to help us address this perplexing issue. Just thought we'd throw it out there to the board to see if anyone else somewhere has run into similar circumstances and challenges. In the meantime, any feedback and/or advice would be dearly appreciated. Cheers,

Hello
Dont be bothered by the other TPL file DDLDB6_LRG.TPL, we are only concerned with DDLDB6.TPl.
Answer following questions to help me analyze the situation -
1) What is the current size of export dump
2) Since when is the exports running
3) What is the size of the source DB? Do you have huge amount of custom developments?
4) Did you try to use table splitting?
5) Do you doubt that there may be other transaction tables (like BSIS) which have been exported completely?
6) Did you update the SAP Kernel of your source system to latest version before starting the Shell package?
7) Were the DB statistics update during the shell or were they already updated before starting Shell?
8) Is your system a distributed system i.e. Central instance and Database instance are on different application servers?

Notebook Taking a very long time to power off

Hi All,
My notebook (HP ENVY 17-j005tx Notebook) when shutting down only takes a couple of seconds, however it can take upto 5 minutes to power off...
At first i thought some service or program was taking a long time to shutdown, I installed Windows 8.1 SDK Performance Toolkit to try and identify a culprit; ran the command "xbootmgr -trace shutdown -traceFlags BASE+DIAG+LATENCY -noPrepReboot" and succeffully generated trace file.
I noticed the notbook had rebooted in just a few seconds..
Anyhow I proceeded to analyse the trace file using the wpa.exe program anf could not find any program or service taking much time to shutdown!!!
SO I understand now the Windows OS is shutting down nicely though the Notebook is taking a very long time to power off.
Anyone have any suggestions? I do have NVIDIA Driver 337.88 installed and did find another thread here where they suspected this driver version has not been tested by HP and after they applied it their notebook shutdown slower than usual - is this somehting maybe to look at...
I'm currently downoading sp63414.exe NVIDIA driver for my notebook - should I uninstall my current driver and apply HP's?
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer
This question was solved.
View Solution.

Thanks visruth,..
What I tried is run "msconfig" and boot into "safe mode", rebooted then shutdown, shutdown was back to normal again.
So then reran "msconfig" disabled all non-Microsoft Services, shutdown and again all powered off as normal (quickly after shutdown).
So rebooted and re-enabled all services again using "msconfig". THen disabled the following services, choosing these specifically as I'm not so sure why they should be running and some not know what they are used for...
rebooted and then shutdown and all shutdown and power off was normal...
It seems one of these services is causing the power off to take several minutes....
I suspect the bluetooth services, or the GSService, or IconMan_R, or possibly the Netgear Genie...
Funny enough I did uninstall netgear genie a few weeks ago and see for some unknown reason the Service is still there???? Hmm...
Jim
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

It seems that there is an inaccuracy in flash games. It is very difficult to hit the button especially if the button is small. How can I fix that problem ?

It seems that there is an inaccuracy in flash games.
it is very difficult to hit the button especially if the button is small.
E.g. in Battle Pirate, it is difficult to switch screenview( zoom out - zoom in )
Seen in many games, so I assume it has something to do with the flash player.
Been looking in settings, but can't find anything concerning mouse settings.
How can I fix that problem ?

You will just have to use other apps for Arabic. You can ask Apple to fix this via
http://www.apple.com/feedback/
I think Apple's iBookstore does not yet really support Arabic books.

It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.

It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.

I also have problems with Facebook on my iPad 2. I don't do a lot with Facebook and generally only post on my feed page. Sometimes hitting return on the keyboard enters the comment, sometimes not. Sometimes the comment will show on my iPad but if I revisit that page I find that the comment has disappeared. So I'd say that Facebook and my iPad are not totally compatible with each other.
I looked into Friendly and was about to purchase this free ap. But before I did I went to the Friendly web page for more info. There I found a page with users comments. One after another users complained about bugs with Friendly. The developers claimed a fix was coming but the user comments complained about the lack of response and support. One of the fixes suggested by the developers was to log out of Friendly then log back in. One user complained that doing this three times in ten minutes was not very helpful. Because of this I decided to avoid Friendly.
I did find a Facebook developed ap but it was for the iPhone. I presume that iPhone aps will work on the iPad but I'll wait until Facebook releases an iPad compatible ap. If there is an ap developed by Facebook for the iPad that I missed please let me know.

Why to find my pics?

My kid just learn using computer not for a long time. And one week ago he made all the pics on my computer gone and I have no idea how he did this. I found the trash bin on my Mac and didn't find my pics. And my kid also didn't know where the pics. What should I do? These pics are very important because they recorded the memories on our family. Can someone tell me what should I do? Thank you very much.

Don't panic, there is a few solutions can folve it. A: Have you turn on the Time Machine on your Mac? If yes, then it will back up your files auto and you can run it to restore your files. B: If don't, you can go to Google or CNET to search and download photo recovery software to recover your pics. There are free versions and paid versions for you to choose.

HT204406 I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out.

I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out. Help!!!

Where are iTunes files located?
No, I do not mean just the music. Copying just the media/music files or the media folder creates problems.

Discoverer report is taking a very long time

Hi All,
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.
Regards
Kumar

Please post the details of the application release, database version and OS along with the discoverer version.
I need help on below discoverer issue.
discoverer report is taking a very long time for rows to be retrieved on export when it is run for India and it is required for month end. For some reason only 250 rows are retrieved at a time and retrieval is slow so it is taking 10 minutes to bring back 10,000 rows.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Long+AND+Time&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Performance&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Messages are taking a very long time to send.

Hello, I'm currently having a big problem with messages taking a very long time to actually send. The spinning wheel will stay there for hours. It only happens in one or two skype groups at a time where I can send messages normally in other groups. Does anyone have any idea how I can fix this?

I have been having this problem for the last 4 releases. I have had some take up to 8 hours to send before. I can usually fix it by signing out then restarting skype. Just restarting skype doesn't work, nor does just signing in again.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and says 12 hours remaining. The text "Time remaining" flickers.

I just got an iPhone 5 32GB and i have backed up my old 3GS 32GB via itunes (20GB of data on there) and it is taking a very long time to restore to my iPhone5. Its taken more than 20 hours and didnt complete.
The text "Time remaining ... hours" flickers.
I set it to start restoring from the 3GS backup yesterday at 1pm and the time remaining kept on increasing. I left it overnight and at 9am this morning the progress bar hadnt moved and it said 12 hours remaining.
I don't know why its taking so long. I unplugged it and it just set up as new phone. So i did a factory reset and tried again at 4pm and it is now 12am and it says 4 hours remaining and my computer occasionally flickers. (Its not a bad computer, 2 months old, i7, 6GB RAM, Heaps of HDD space). It also messes with google chrome and i cannot browse the web at all while it is trying to restore my iphone.
I have tried restarting my laptop and should i reinstall itunes? I simply dont see why it should take longer than 20 hours to copy over 20GB of data!
Can anyone help me?
Thank you

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

Finding taking pics very difficult

Similar Messages

Maybe you are looking for