Finding the Best GarageBand Version for Me

I have been using GB1 for a few years. I know there is info listed on min configurations for the 3 versions of GB. BUT, I'd appreciate knowing:
1. If anyone has had experience with GB2 and GB3 with a similar configuration to mine
2. What I should have to get GB3 to work, considering my set up.
I have a 400 MHz Power PC G4, 896 MB SDRAM, OS X 10.3.9
Precise help would be much appreciated. Thanks.
80 & 100 & 160 GIG HDs Mac OS X (10.3.9)

A new Mac is usually a very nice option.
However, you might consider getting an upgrade to your processor (at least up to 1 GHz). This would allow you to use GB3 with relative ease, without such a large investment.
Of course, the more processor power that you have, the more you can easily do.

Similar Messages

  • What is the Best Safari Version for OS 10.9.5 Maverick on a MacBookPro, 2.4Ghz, 8 GB Mem.?

    What is the best Safari Version for OS 19.9.5 Maverick on a MacBook Pro. 2.4 Ghz, with 8 gb memory?

    The best version for Mavericks, in fact the only version, is an integral part of OS X. In other words you already have it.
    Its version number is 7.1.5.
    Keep OS X up to date: Update OS X and App Store apps on your Mac - Apple Support

  • What is the best windows version for gaming on 32bit system

    what is the best windows version for gaming on 32bit system?

    Hi,
    What game do you want to install in Windows? For a game, you should choose your OS based on your game requirement.
    Andy Altmann
    TechNet Community Support

  • Trying to find the correct Oracle version for SCO Unix 5.06

    Please I will appreciate you can help me indicating where can I download the correct Oracle version for SCO Unix 5.06. I have downloaded the Tru64 Compaq version but it is not working with SCO.
    Best regards
    Armando Delgado
    00511 8105860
    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version
    - O/S + Version
    - Error Msg

    This is pretty old. From the certify matrix, you can see the last available versions this platform supported were 9.0.1 and 8.1.7, just for the Intel SCO Open UNIX 8 with LKP. SCO 5.0 last time I used it was with an Oracle7.3 release. In case you don't have software it'll be hard to find, unless you address this to your Oracle Representative.
    Are you absolutely required to run on this version? Otherwise, you could try new software and new oracle releases, unless you want to run unsupported.
    ~ Madrid.

  • What is the best software version for Q10?

    Plz tel me what is best version for Q10.
    10.2 OR 10.3.and where from download the officially versions

    Well, that all depends. there is no official 10.3 for the Q10 so I guess it would be 10.2. You can load 10.3 unofficially if you want but you'll need to do that manually and your carrier won't support it.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • What is the best GB version for my mac running 10.6.8 and where can I get it?

    Trying to find where I can get GB for my mac running 10.6.8

    is GB 11 the best one for what I have?

  • Finding the Best Adobe software for my document

    I need help to find the Adobe software that I can use for my project. I have created a document in Microsoft Word that is 180 pages. I want the form created with unlimited expandable fields. Inside the fields I want to have grayed out type that gives a client an idea of what to fill in. This grayed out type will go away when they fill in their information.Can I use Adobe Acrobat X Pro Designer for this?

    Hi,
    Yes, you can use LiveCycle Designer (which comes bundled with Acrobat. However an 180 page XFA Form may become unresponsive particularly if it contains a lot of script or dynamic behaviour.
    Also there are certain restrictions that the user may face depending on the software they are using (Acrobat or Reader) and whether the form has been Reader Enabled (and how it was Reader Enabled). See summary here: http://assure.ly/etkFNU.
    Good luck,
    Niall

  • Help finding the Best BIOS settings for P67A-C45 (2)

    Hello again folks
    I Have a P67A-C45 board with an Intel i5 [email protected] and 8Ghz DDR3@1600 of memory
    I just want to know what are the best setiings to my system. I'm planning to make an overclock, but i don't know much about these.
    My ram are at 1333 MHz. What's the problem????

    Quote
    My ram are at 1333 MHz. What's the problem?
    Your CPU only natively supports up to 1333mhz memory. Your memory sticks, although rated to run up to DDR3-1600 speed, are only natively DDR3-1333.
    Hence, if you have not applied any overclocks, and are running at default settings, the BIOS is reading the default native SPD setting for your memory, which will be DDR3-1333 settings. So no, there is no problem really. In order to run your sticks at their rated setting, you will need to overclock.
    But, you might want to have a read of this:
    https://forum-en.msi.com/index.php?topic=147704.0
    If you have more questions about overclocking, then please ask them in the correct area of this forum (the Overclockers area), after first reading the >>Posting Guide<<

  • I can not find the language ARABIC versions for N7...

    I used software updater for mobil N70  but when the update finish i did not found the Arabic language in the new software
     iam used Nokia Software Updater N70 ARABIC
    WHAT  IS WRONG?
    So
    I want software for nokia N70 that support The Arabic language. PLEASA HELP ME
    thank you

    Hi Per,
    Just checked your account and able to find that you have PSE9 registered. Please navigate to Adobe.com>Manage my account>Products and you should have the key available.
    Cheers,
    Kartikay Sharma

  • Anyone know the best Flash version for the Samsung t210  tablet?

    I'm trying to load in an archived version and there a lots of choices.
    Thank you

    See: "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy)
    Has a link to older versions

  • What is the best iOS version for iPad 2?

    I am using iOS 5.1.1 in my iPad 2 with no problems.I want to know whether I can use iOS 6 with my iPad 2.Apple says it did support for iPad 2.but I am scared that my iPad will slow after iOS 6 update.so apple experts,what are your thoughts?
    Anyone now using iOS beta on iPad 2.how is it?

    Sorry, anyone using iOS 6 will be under a Non-disclosure agreement and not able to comment on it.

  • What are the best sequence settings for a movie to be put on youtube?

    I am making a video that consists of mainly jpegs and audio. The final movie needs to be crisp and fairly high resolution because the pictures have some house plans that need to be easily read.
    I have tried the following settings only to get a blurry image result in the end:
    Frame Size: 960x720 Aspect Ratio: HD (960x720) (16:9)
    Pixel Aspect Ratio: NTSC - CCIR 601 DV 720X480
    Editing Timebase: 29.97
    Quicktime Video Settings:
    Compressor DVCPRO50 - NTSC
    Quality: 100%
    This seems to me like it should be a crisp enough image result but the end result is very poor. When I use the H.264 Compressor instead of DVCPRO50 - NTSC, the image is much sharper but the faded transitions are sometimes choppy, and you have to render the timeline with each change you make. Please help me find the best overall settings for smooth editing and sharper image.
    Thanks,
    Caleb

    Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
    If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
    Frame Size: 1280x720
    Aspect Ratio: HDTV 720p
    Pixel Aspect Ratio: Square
    Editing Timebase: 29.97
    Compressor: Motion JPEG A
    Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
    Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

  • Where can I find an old BIOS version for X200

    Hi,
    I am running windows 7 build 7100 on an x200. After updating to BIOS Version 3.05 - 3.06 the system is significant slower. Where can I find the former BIOS version for download?
    In advance thx a lot for support.

    Hi wolfgang285, and welcome to the Lenovo User Community!
    All the BIOS versions which have been released on the web are on the X200 BIOS update page.
    I don't work for Lenovo. I'm a crazy volunteer!

  • What is the Best Export settings for Uploading to Youtube?

    Hi, Im kinda new to this can someone pls help me find the best video quality for uploading in youtube. SO when i xport media and choos h.264 and hten go to any other format other than widescreen high resolution preset all my titles becomes choppy but when i choose that preset it seems to be okay but the resolution on youtube does not go above 480p.
    which format and preset combination do i choose in order to get on youtube 1080p without having my titles in the video all choppy?
    If im missing any info pls let me know
    Thanks

    I find the YT presets work very well.
    Choppy YT playback might be a poor Internet connection.  Post a link, I'll check here.

  • Best imovie version for a G3?

    My G3 is a 350 Mhz blue and white with a 250 GIG hard drive and 768 MB RAM. Which version of imovie would work best with this G3?
    I will also need to choose an operating system for this computer as well as imovie.
    Which version of imovie should I be considering for this G3?
    imovie1
    imovie2
    imovie3
    imovie4
    imovie5
    imovieHD (I'm not sure if my G3 can even run imovieHD)?
    and which OS for this recommended version of imovie?
    I would like to keep my budget to a minimum and so I am not considering Tiger 10.4. Instead I am considering Panther. Does imovie come with Panther? Where could I buy imovie and Panther for my G3?
    I would like to be able to make short quicktime movies and maybe edit my DV footage. It would also be nice if I could create a DVD however I don't think that is possible with my G3 because iDVD doesn't run on a G3. I will be considering adding a pioneer 110 DVD writer. How can I create a DVD from this G3? I could use toast 7 however I would rather look for an open source solution if there is one to reduce my budget. How about ffmpegX?
    Basically, I am trying to push my G3 to its limit before I move on an buy another computer.
    Thank you,

    Thanks Thomas,
    I am not planning on much video work - if any at all actually. I am coming to terms with the fact that this computer is at the end of its life. I was just asking how far I can take this G3 in terms of imovie but mostly in terms of choosing an appropriate OS for this computer - it will most likely be its last OS
    If it can't burn DVDs that's fine and I will accept that - I just do not want to spend any more cost. You see, I will be buying an intel mac when they come out soon and then I will be re-designating this G3 as the family computer.
    I considered a G4 a few days ago and they all seemed to be fairly expensive - $400 or so or even more. I will reconsider this however now that you mentioned it. Thanks. Basically, I do not want to spend much on upgrading it. Maybe just an OS.
    Thanks Thomas.
    This still leaves the question: What is the best imovie version for a G3?

Maybe you are looking for

  • How do I transfer music from my ipod to my PC/iTunes

    I've recently purchased a new computer and I created a new iTunes account as my old computer crashed. All my music is still on my iPod but how do I transfer my music from iPod to my PC/iTunes? Thank you

  • Samba turning itself off

    I can't figure out why Samba is turning itself off. It happened once or twice last month but now it's weekly when the pc client id logged in or not. There nothing obvious in the log files. I'm wondering if it has something to do with the latest OS up

  • TS3274 My external sound on my iPad comes and goes

    I can plug headphones into my iPad and hear sound but if I unplug headphones you can't hear sound externally. And if you go to the music  app on the iPad to listen to music the area in the upper right corner where you should see volume slider button

  • Existing state of packages has been discarded...

    Hi all, I know this is a long shot and probably you need more details to help, but please take a look in case you've encountered something similar before... It is a pretty interesting problem. Ok, I have two packages, say, A and B. Package A is compo

  • IPod Randomly Reset Itself, Now Apps Are Not Working!(4th gen)

    So, I was just browsing websites in Safari when this happened. I'm pretty sure I got linked to Tumblr and then my iPod decided to reset itself. After that, many apps refused to work, including Safari. Puffin Web Browser still worked, but it said that