Finding the correct video driver
I recently replaced my pavilion dv6 3240ca mainboard with a new one that I purchased online. The difference between the two main boards are the factory board(3240ca) had a hd radeon 6370m and 4250(switchable). The new board purchased (mainboard #631082-001) uses HD radeon 6550m with the same energy saving 4250.
I am not sure which model the new board came from. In BIOS have found the Product number to be #XB531EA#ABU if that helps determining the model. Also the AMD phenom II N870 processor swapped over as both boards have the same s1 socket.
Basically when I attempt to install a driver from another dv6 3XXX series notebook(tried 3286ca graphics driver as I found out it has the 6550m/4250 combo), the AMD installer prompts windows update which detects HD radeon 5650m.
5650m is not the correct graphics card however the two are closely related. The main difference being 6550m supports directX 11 and 5650m does not. Would like to install the correct driver for my graphics card, so is there a way around windows update insalling the wrong driver??
OK so I just plugged the Product #XB531EA#ABU into search and support and it brought up model dv6-3031sa... which actually has HD5470m!!
Is it even possible for a HD 5650m driver to work for an HD5470m GPU?
When I check systeminfo and then tried Video Memory Stress Test, both show HD radeon 5650m with 1gb of dedicated memory. The HD5470m only has 512mb of memory, but Video Memory Stress Test shows the GPU using the full gigabyte of graphics memory....
Ughh this is confusing. What can I do that will help determine for sure which system board and GPU I have??
Similar Messages
-
Hi Experts,
I am keep getting the stop error 0x00000116 failing with a blue screen while im browsing. I have observerd this quite a few times and also I could not find the correct video drivers for my t61 thinkpad in the ibm site. I could see the details as wxp & windows vista but not for win 7. Please find the link below which has all the video drivers fro t61. Please help me find the correct customized video drivers fro my t61 + win 7. Hope you understand my problem.
By the way i just use for home computing and my win 7 is upto date wiht no extra software and games installed. I dont play games at all on my t61.
my t61 specificaitons : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67883
If you see the link http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
if u search in the baove link ,you cannot find the video drivers for t61 + win 7. You have it only for xp & vista in this section. Intel X3100 (940GML, 945GM, GL960, GM965). there are no video drivers for win 7 for t61. my video card info is
Video chipsets:
Intel PM965/GM965 graphics. (15.4 inch).
my video card is Intel PM965 chipset . Please help me to get the correct customized version of the video drivers for my thinkpad as I am getting this problem with video drivers and its getting restarted when I am in the middle of something. But it works find after that. I have tried to install drivers from intel and its saying i have customized version of lenovo drivers and I should contact you guys. I triedcomplete win 7 update from windows site and installed all patches and still getting the problem intermitently, but after restart it works fine. No hardware or software changes. Its that I need the correct version of video drivers for win 7. Please inform the lenovo about this and ask them to develop the good video drivers for win 7 + t61 model. Hope you understand my situation.
Please let me know if you need any kind of info so that i can provide.
thanks for reading the mail.
Regards,
ManuAre you kidding me ? You dont work for Lenovo and you are an active volunteer here in this forums. I have seen your replied many times and wont get paid by Lenovo, you are really crazy for ur stufee .Anyways thanks a lot for the link and the original lenovo staff were notable to provide the link and you could. Well I have tried that what you have said nd still I could not get the link, here you go..
http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=50880&template=%2Fproductpage%2...
Let me install the drivers from your link and I will reply soon, so who ever search in this forum now , there wont be any problems for t61 windows 7 video drivers because of u. You are awsome.wll reply my results soon. -
Can someone please help me find the correct driver for my audio ca
Hello, it's famke again...Still trying to find drivers.. My sound card is apparently also missing drivers... I've tried many drivers from different sites matching the information i've taken off the card...but for some reason i always get a big red slash through my audigy sound control panel after trying to install the driver and reboot my system... I'm convinced i haven't been able to find the correct driver... The information off the card is...Soundblaster Audigy 2ZS M:SB0350... If anyone can help out i would greatly appreciate this...Famke.
I'm new to this, but I also had trouble for a while in finding and installing the right drivers. Eventually I got it to work with the link below. Follow the steps and select everything it suggests (I did and it worked for me). You might want to try it and see if it works for you too. Good Luck. http://www.creative.com/language.asp...wnloads/su.asp
-
Does any body can tell me hoy can i find the correct driver, i tried everything, unistall de actual drver, and let windows tu search for the driver and nothing, it seems keep telling me it doesnt find the driver, itunes doesnt recognize mi appletv, what can i do?
Hi:
Install the above driver and that will install both the ethernet driver and co-processor driver.
You have a problem with the wireless card...could be minor, could be major.
The wireless card is missing from the device manager.
Install this software, reboot, and see if you can turn on the wireless card by using this software.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76368_1&swEnvOid=4052
If that doesn't get the Network Controller device to show up so that you can post the hardware ID for it, then the motherboard is shot. Power to the slot that the wireless card is connected to has been cut.
Very common problem with the Nvidia chipset motherboards with the amd processors. -
Trying to find the correct driver for HP DesignJet 450c. Running Windows XP
i can't get my HP Design Jet 450c to operate. Does anyone know the correct printer driver for WindowsXP
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=24561&pr...
-
Setting up boot WIM... but having trouble setting up the correct NIC driver
I'm trying to setup a network boot with Windows Deployment Services. Pretty straightforward (http://technet.microsoft.com/en-us/library/cc766320.aspx). Problem though is the OOTB Vista & Win2k8 boot.wim file don't include the necessary driver for the NIC card (Intel 82567LM Gigabit NIC). So I'm following these steps outlined here in the MSFT KB (http://support.microsoft.com/kb/923834) but seems I'm not loading the correct driver. I looked in my w500 Vista x64 install that has a working NIC to get the working NIC INF file, but that didn't work. Anyone successfully done this? I'm sure some of the bigger organizations have... just having trouble creating a boot.wim (or modifying the one I've got) to add the correct NIC driver to continue with a PXE boot.
AC
============
ThinkPad w520 | Intel i7 2.5Ghz | 2x 512GB Crucial SSD | 16GB | NVIDIA GeForce Quadro 2000M 2GB | 6.9 Windows Exp Index
Ultrabay DVD + modular Ultrabay 256GB Crucial SSD SATA
Win7 Ultimate x64 | Windows Server 2008 R2 | Win8 Release Preview
ThinkPad x200s | Core2 Duo 1.86 | 256GB Crucial SSD | 4GB | Intel Mobile Chipset Video | 3.4 Windows Exp. Index
Win7 Ultimate x64 | Windows Server 2008 R2Thanks... I got that far as the boot loader is x86... but I'm trying to figure out which specific INF rather than load all of them as its a manual process.
AC
============
ThinkPad w520 | Intel i7 2.5Ghz | 2x 512GB Crucial SSD | 16GB | NVIDIA GeForce Quadro 2000M 2GB | 6.9 Windows Exp Index
Ultrabay DVD + modular Ultrabay 256GB Crucial SSD SATA
Win7 Ultimate x64 | Windows Server 2008 R2 | Win8 Release Preview
ThinkPad x200s | Core2 Duo 1.86 | 256GB Crucial SSD | 4GB | Intel Mobile Chipset Video | 3.4 Windows Exp. Index
Win7 Ultimate x64 | Windows Server 2008 R2 -
Error "Could not find a capable video driver. Update display drivers." in Pr CS6
Please help! I can't open my Pr CS6 - keep on getting error "Could not find a capable video driver. Update display drivers." How do I fix this?
Display driver http://forums.adobe.com/message/4943624 may help
For the future, please list this information when asking a question
Information FAQ http://forums.adobe.com/message/4200840
You need to post the EXACT brand and model of your graphics card, and the device driver number
If you have nVidia...
How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10 -
Find the time a drive was disconnected
This is not your usual case, but if there is an answer to it, this may help others. Recently I had an external drive stolen from my iMac running mountain lion. I was wondering if there is a terminal log, or something I can find that will show me the time that drive was disconnected. This will help me figure out when the theif was in my home and narrow in on the finding who it was. Yes, I believe it is someone I know. This is very important to me, and I hope there is something out there that can help me find the time this drive went offline or was disconnected. It was just removed (pulled out of the computer "disconnected"), and not ejected, so maybe there is a log of this somewhere..?
Thank you all for your help.Use the Console application in Utilities and check the System log. This is the info from my machine for a disk just pulled and a correct unmount, the xxxxx just replace my machine name. Disk names may be different on your machine.
Sep 29 15:18:07 xxxxxxxxxxxxxxxxxx kernel[0]: disk1s2: media is not present.
Sep 29 15:19:19 xxxxxxxxxxxxxxx.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.volume.removable.unmount' by client '/usr/sbin/diskarbitrationd' -
DB13 can not find the correct controlfile.
My environment is
Win2003
Oracle 10g
Ecc 6.0
When I use DB13 for the full offline backup, I get the following message:
BR0051I BRBACKUP 7.00 (13)
BR0055I Start of database backup: bdtelngh.afd 2006-08-02 21.01.03
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\DEV\102\database\initDEV.ora - default assumed
BR0274W File 'D:\oracle\DEV\102\database\CTL1DEV.ORA' not found
BR0101I Parameters
Name Value
oracle_sid DEV
oracle_home D:\oracle\DEV\102
oracle_profile D:\oracle\DEV\102\database\initDEV.ora
sapdata_home D:\oracle\DEV
sap_profile D:\oracle\DEV\102\database\initDEV.sap
backup_mode ALL
backup_type offline_force
backup_dev_type disk
backup_root_dir D:\oracle\DEV\sapbackup
compress yes
compress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\mkszip -c $ > $
uncompress_cmd D:\usr\sap\DEV\SYS\exe\nuc\NTI386\uncompress -c $ > $
exec_parallel 0
system_info SAPServiceDEV JXCDEV Windows 5.2 Build 3790 Service Pack 1 Intel
oracle_info DEV 10.2.0.2.0 8192 1870 13112942
sap_info 700 SAPSR3 DEV U0388471103 R3_BASIS 0002894446
make_info NTintel OCI_10103_SHARE Apr 2 2006
command_line brbackup -u / -jid ALGOF20060802210000 -c force -t offline_force -m all -p initDEV.sap -w use_dbv -a -c force -p initDEV.sap -s -w
BR0116I ARCHIVE LOG LIST before backup for database instance DEV
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\DEV\oraarch\DEVarch
Archive format ARC%S_%R.%T
Oldest online log sequence 1867
Next log sequence to archive 1870
Current log sequence 1870 SCN: 13112942
Database block size 8192 Thread: 1
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\DEV\SAPDATA1\SR3_1\SR3.DATA1
BR0120I Control files
File Size Id. Device Link Type
D:\oracle\DEV\102\database\CTL1DEV.ORA 8192 0 0 NOLINK FILE
BR0280I BRBACKUP time stamp: 2006-08-02 21.01.09
BR0115I Compression rate for all files 5.8422:1
BR0056I End of database backup: bdtelngh.afd 2006-08-03 06.07.57
BR0280I BRBACKUP time stamp: 2006-08-03 06.07.59
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2006-08-03 06.07.59
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20060802210000 -d disk -c force -p initDEV.sap -s -w'
BR0280I BRBACKUP time stamp: 2006-08-03 06.08.06
BR0292I Execution of BRARCHIVE finished with return code 1
1.It seems the correct control file can not been found.
I have checked the file "initDEV.ora" and spfile.In them the positions of control file are "/origlogA/cntrl","/origlogB/cntrl" and "/sapdata1/cntrl".
So I donot know why the process of DB13 cannot find the correct control file and search the file CTL1DEV.ORA.
Because the correct control file could not been backuped,I can not restore and recover the database.
What causes it?
2.
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\DEV\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
How can I solve this warning? And why it occurs?
Anyone can help me?
Thanks!
Ryan FungPraveen,
I had the same problem as Ryan and Gary on a new XI \ Oracle 10g installation and your suggestion did solve this. It seems that when you run the first BRTOOLS based backup, Oracle tries to create a PFILE from the automatically generated SPFILE, but the DB user doesn't have rights to delete the SAP.ORA file. Once you assign SAP_<SAPSID>_GOBALADMIN full rights to the Oracle folder, an updated INIT<SID>.ORA is generated and the default SAP.ORA is deleted on the next BRTOOLS backup run.
Thanks for the tip.
Rgds,
Andrew -
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
How I find the correct iTunes account?
I just reloaded my pc laptop and when I tried to sync my iPad a message said I was on a different account and if I continued to sync my iPad was going to be erased. How can I find the correct iTunes account?
By "reloaded my pc laptop" I take it you mean you wiped the PC and restored it back to factory settings? If so did you backup all your documents and data first? Normally your user profile contains a Music folder which in turn holds the iTunes folder. All the important details of your library are in there, with the media below in a folder called iTunes Media. If you lose this information and then connect your device to an empty iTunes library it will want to clean it out and start over.
You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into an authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That might switch the assocation of the device to the new machine but I couldn't say for sure.
tt2 -
I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?
Hey b.elyse
Check out the following article that will assist with removing iTunes. Make sure to follow the order to ensure that it removed properly.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Adding/Deleting T codes to roles. Finding the correct roles to add/delete T
Hi Folks
I would like solutions to 3 questions.
1) How do you Add/Delete transaction codes to roles (ECC6)
2) How do you find the correct roles to Add/Delete these T codes
3) Has anyone any documentation and or screenshots on Versa, the Compliance Calibrator.
We are using single roles within composite roles.
Useful answers will be rewarded.
Thank you very much
Mark WHi Mark,
Typically the functional team or organisational design team will specify the roles required and the transaction assignment to those roles. By working with them, you can understand what part of the business processes the roles represent and get an idea about which transactions go in what roles. They will also be able to advise if a new role is required id a transaction is missing.
The allocation of tx to roles should only be approved by role owners or appropriate responsible resource, and they should stipulate exactly which roles those tcodes go into. If you have not been involved in the role design then it is not appropriate for them to expect you to make those kind of decisions.
All of the recent compliance calibrator docs are on the service marketplace, I'm sure that the basis team on your current project will either give you their OSS ID to let you download them, or alternatively will download the docs for you if they have concerns about sharing the ID. From memory, if you have security certification, you should be able to get an individual OSS ID from SAP.
There is some high level info available from www.sap.com/grc and a brief overview of an install of CC5.1 here: http://www.*********************/sox_sod/sox_sod.htm
Hope that helps
Cheers
Alex -
Find the correct data from series of messages
I have the RFC -> XI -> SOAP scenario; In this scenario, RFC will send some notes of service for the WEB service via SOAP.
When I access the monitor of messages of the XI, I got series of messages. How I should find the correct messages out of this bunch.
How can I locate one definitive note for the number of it through the monitor of the XI?a s
You need to use selection criteria to restrict message view to the relevant messages
Monitor for Processed XML Messages
http://help.sap.com/saphelp_nw04/helpdata/en/c4/9a5c3bab977239e10000000a114084/frameset.htm
Once you have identified the relevant messages (say your three examples of the same message type), you then need to distinguish between each one. To do this you will need to open each relevant message then view the payload of the inbound message and / or the response message. This blog is only relevant in that it highlights the message header, payload etc. Refer to left hand side of screen once you have displayed the message version
Monitoring for Processed XML messages in ABAP Proxy
Monitoring for Processed XML messages in ABAP Proxy
Regards,
Mike -
Where can I download the latest video driver for macbook pro 13''?
I have this game that I want to play but it won't start cos it says that I need the latest video driver. Btw, im using windows 7 64bit to run this game. Thank you.
Here: http://www.amazon.com/Macbook-Silicone-Keyboard-Cover-Generation/sim/B0015UQMJM/ 2
Maybe you are looking for
-
I saved docs from a iMac to a flashdrive but when I plug the flashdrive into an iBookG4 and try to open the docs on the flashdrive, I get this message: Doc 2 cannot be opened. The required index.xml file is missing. Does this mean that I can't use th
-
Excel upload in background not working
Greetings, I have used 2 functions, ALSM_EXCEL_TO_INTERNAL_TABLE and TEXT_CONVERT_XLS_TO_SAP. Both work when run online, but fail in background. What I am reading suggest that the excel must be converted first to a txt (tab-delimited). Is this correc
-
URGENT!! synchronization in servlets
Hello I need to synchronize access to a connection in a servlet. If I make the connection static, and put the connection in a synchronized block, will that work? The servlet is not a SingleThread servlet, so more than one request could be coming thro
-
"complete albums" not showing all songs.
throughout the weeks i have been buying Justin Bieber's songs to his new album Journals as he realsed then song by song. Now he has released the full album i have completed the album but two of the songs that i had already purchased i have had to re
-
HI All, i've got big headache....this error message on "Application and Content Networking System Software Release 5.2.9 (build b5 Dec 29 2005)" cisco CE :) error is: Manifest Parse Errors Manifest Parser Error(701):ProcessCrawler: failed to insert c