Finding the correspponding IDoc No's for values in a segment of the Idoc

Hi,
I have around 100 work order numbers, based on which I want to find out the failed Idoc numbers. These work order numbers are part of one of the segment fields in IDocs. I know the message type of the IDocs.
I do not want to use transaction WE09 as it would be too time consuming, entering one work order number and finding the correspponding IDoc. Is there a way of finding all the correspponding IDoc numbers for the work order numbers that I have at one go.
Any help would be greatly appreciated.
Thanks and Regards,
Mick

Thanks Raja.
But I dont want to write a report. I was just want to get the IDoc numbers using a table or a function module. Any idea if using Transaction SE16N can help?
If yes how should I go about it, as I have already tried querying table edid4 passing all the work order numbers. But no result. What I have observed is that the data is stored in the field application data in the table and to get data querying the table, passing the work order number might not be possible. As the application data contains a lot of other data also.
Regards,
Mick

Similar Messages

I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?

The 2nd generation can not be upgraded beyond 4.2.1.

The version of iOS on does not match any of the versions of iOS supported for development with this installation of the iOS SDK

Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.

Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.

HT4528 Hi my phone stopped charging I have to wiggle the wire a certain way for it to charge I think the inside is broken I tried multiple chargers

Hi my phone stopped charging I have to wiggle the wire a certain way for it to charge I think the inside is broken I tried multiple chargers

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Hello I just bought the usb super drive and for some reason when I put the disc in and download the application it won't show.Just a bunch of words will show up.

Hello I just bought the USB super drive for the mac book pro and for some reason when I put the disc in and I download the content and for some reason when I put the aplication just a bunch of random words come out,not the content the disc brings.

Ok, I hope I'm not steering you in the wrong direction, but I've just found this on the support site for the software.
Interchange Interactive Whiteboard Software System Requirements
Please note: These discs work on Windows PCs only.
Minimum System Requirements
Pentium II 300 MHz processor
Windows 98 / ME / 2000 / XP / Vista
64 MB RAM
50 MB free disk space if not installing onto hard disk
1.44 GB free disk space if installing (recommended)
4x CD-ROM drive
800 x 600 screen resolution displaying 16-bit color
Sound Blaster compatible sound card
Mouse or other pointing device
Headphones or speakers

I bought the Tiger woods 12 game for my ipad and also paid the 19.99 for the $2M. It has crashed my ipad a few times and when it restarted last time, it had no history of my progress or the $2M. How do I get my history back

I bought the Tiger woods 12 game for my ipad and also paid the 19.99 for the $2M. It has crashed my ipad a few times and when it restarted last time, it had no history of my progress or the $2M. How do I get my history back or my money back for the game and the in-game expenses?

The only one that can issue a PUK code is a carrier, which you've already made clear you don't have.
If itunes does not recognise your ipad that may be another issue. What version OS is on your computer and what steps did you follow to uninstall itunes and then reiinstall itunes on your computer?
And, do you at least see the sidebar on the left hand side of itunes?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
Do you have another computer you can try?

I purchased the Creative Cloud Photography Individual for $9.99 a month. The photoshop doesn't seem to work right!

I purchased the Creative Cloud Photography Individual for $9.99 a month. The photoshop tools do not compare to CS4, I can't click on the arrow to get to the other tools withing the set and I get this error code: I get this error code: One or more files in the adobe application support folder, necessary for running photoshop are missing. Please run the Photoshop installer and reinstall photoshop. and can't figure out how to get to the installer again!

Here is what you get when clicking on the gear in the adobe manager.

Iphone 4 sync issue - My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

Why can't I set up POP/IMAP emails for my Muse website in Business Catalyst? I don't have the option 'use this service for email as well as hosting the website' under Advanced options

Why can't I set up POP/IMAP emails for my Muse website in Business Catalyst? I don't have the option 'use this service for email as well as hosting the website' under Advanced options.
Is this due to my Hosting Plan? Appreciate any answers.

Your site is a CCM site which is on a WebBasics plan (This plan does not provide hosted emails on Business Catalyst).
If you want to create email addresses on this site, you would need to setup your email server elsewhere and configure the MX records on your site to point to that external mail server.
If you want to use Business Catalyst's hosted email services you would need to use a WebBasics+ or higher siteplan. To upgrade your CCM free site, Access your site's admin area -> Site Management -> Upgrade Now -> choose the desired site plan and billing frequency -> Add personal and credit card details -> Submit.
Please refer this article about setting up email accounts on your BC site: http://docs.businesscatalyst.com/user-manual#!/site-settings/email-users
For setting up records to point to external mail server, check out http://docs.businesscatalyst.com/user-manual#!/site-settings/email-users/creating-inboxes- for-your-users
Regards,
Surjeet

HT201272 Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
Regards.

I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

I have 3 ipads with ipad 1 and 4 i can see near all videos from facebook but on the ipad 2 is asking for adobe flash player and its the same video that i watch on the other ipads ! Any help please

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

I have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

YOu'll have to restore, nothing else you can do.
If you have an older backup you can restore to that.

HT5714 Why did I pay $19 for Start Trek Into Darkness pre-order, if Apple KNEW they were going to release a bundle on the release date and I could have got the other Star Trek movie for just $5 more? What the heck Apple, I feel completely ripped off.

Why did I pay $19 for Start Trek Into Darkness pre-order, if Apple KNEW they were going to release a bundle on the release date and I could have got the other Star Trek movie for just $5 more? What the heck Apple, I feel completely ripped off.
I didn't even have time to cancel the preorder as that processed a couple minutes before the bundle was posted.
Pre-orders are apparently not worth my time ever again.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Perhaps there will be something they can do for you.
Regards.

I try to open iPhoto and it asks what library file I want to use. I have Find Any File application that someone once gave me the "magic" file to search for, but I do not remember the file

I had this problem before and someone gave me a "magic" filename to search for using my Find Any File application, but I cannot remember the file name. Is it iPhoto6-something?

Hello Joel,
Don't know how to determine my OS
To determine your OS click on the apple in the upper left corner of your screen and click "About this Mac". The "About" panel will tell you all about your Mac.
On my mac (OS 10.7.3) I can search for iPhoto Libraries like this:
Select my Home Folder in the Finder
Type in ⌘-F to activate a search
Set the "Search" to "This Mac"
Set the "Kind" selector to "Other" and enter "iPhoto Library" into the search field.
This should reveal all iPhoto Libraries on your Mac.
With "Find any File" you could search for the ".iPhoto"-extension.
Regards
Léonie

How to generate the User-Input XML Body for executing workflows via REST APIs: The Solution

I see that executing a workflow via REST APIs requires lot of work to be done just to prepare the right User-input XML body. Any mistake and you have some major debugging to do. Larger the number of User-Inputs, the bigger is the problem.Life is so much easier at the WFA GUI with Display names and tooltip help for User Inputs which are very easy for reading and providing the right values. I don't have any such privileges when manually preparing the User-Input XML body.It’s been asked numerous times how to provide User-Input values for type table, or Query (Multi-Select) etc. These are complex User-Input types and has lots of scope for user mistakes.I can have User-input dependency at WFA GUI which allows me to make the right selection, but while preparing my XML body I need to take care of it myself.An operator is allowed to execute workflows, but the same Display names which help him make the right user-inputs, makes it impossible for him to prepare the user-input body xml. Display names can't be used in in XML body and he can't know the exact parameter names by looking at the Display names. So he need to always contact the Admins/Architects for this. And Architects/Admins can't be expected to keep providing User-Input XML body to operators every operator. How about if I could enter all the User-Input values in my workflow execution at WFA GUI, I can do a preview which passed to my satisfaction and then I can magically get the XML body for it which I can use to execute my workflow from REST APIs from any client. It could be so very much easy for me than building my User-Input XML body manually. This is exactly what I'm going to give you right now. You open the WFA in browser, Go to your workflow, Start execution, you input values from GUI reading carefully the display names, preview it to your satisfaction and then get the XML body. Assume your workflow is called “Workflow to Print a given Message”. It’s a simple workflow with only 1 user-input Displayed as "Message to Print" Prerequisites: The following are the one-time prerequisites. You need PowerShell 3.0 on your WFA server.Import the attached Generate_Workflow_User_Input_Body_in_XML.dar in your WFA. It’s our magical command called "Generate Workflow User Input Body in XML"Add credentials of a WFA Admin/Architect in you WFA itself with Name/IP: localhostMatch: ExactType: OtherName/IP: localhostUsername: <WFA Admin/Architect Username>Password: <User Password> Steps: Suppose you have a workflow called "Workflow to Print a given Message". You want to execute it from REST apis and need to prepare the user input XML body. Select this workflow and clone it. The workflow clone is the exact copy of your original workflow word by word, input-by-input. It will open in Edit mode with name "Workflow to Print a given Message - copy".Add the command "Generate Workflow User Input Body in XML" at the beginning of your workflow. This is a must. This command need to be the first command in your cloned workflow.This command requires no input. So for its Parameters just press okay and save the workflow.You are done.Now Execute the clone workflow. You'll see all the user-inputs available to you. Make your choices as you wish. Preview it to confirm that planning is passed and u have no errors.Execute it now.You'll see that the our magical command "Generate Workflow User Input Body in XML" has failed in our clone workflow execution. Don't worry, its fate was decided to be so. But it didn't fail before giving me what I really wanted. i.e. my XML body for my real workflow. It displayed it in the GUI as well as saved it in your WFA server @ C:\temp\<workflow_name_dd_MM_yyyy_hh_mm_ss_.xmlIt also deleted all the reservations of this particular failed job. So NO major residue left to be cleaned.To summarize: Clone Your workflow and Add the command "Generate Workflow User Input Body in XML" as your first command. Start Execution, provide your User-inputs and preview it. Be satisfied and Press Okay. Now Execute it. After a few scconds this cloned workflow will fail with Error "All done. The Workflow will fail now." See the command execution logs for this command. You'll see the User-Input XML body. It has also saved the XML file at C:\temp in your WFA server. Have fun. sinhaa

Providing a new version 1.1.0 of the command "WFA Schedular" Changes made: Added conditional String Representation based on the Scheduling parameter provided. Provided check for the right number of parameters passed into the command.Added a new parameter "Expiry Date" to automatically stop the recurring execution upon expiry.Check for Posh3.0 version in code.Have Fun!! sinhaa Below example for:Schedule a workflow for recurring execution every alternate day i.e. once in 2 days at 10:30 PM starting 06-Jul-2015 (Today's date is 02-Jul-2015) . The recurring workflow execution should expire on 31-Dec-2015 and stop.

Finding the correspponding IDoc No's for values in a segment of the Idoc

Similar Messages

Maybe you are looking for