Finding the data source

Hi ,
Valuation Category - MBEW-BWTTY.which data source contains this field in R/3 side. I could not able to find out the data source which contains this field.
that to in FI & CO SIDE(finacial & costing ).
pls help me.

HI leela,
Data source that uses this mbew table is 2lis_03_bx, 2lis_03_bf , 2lis_03_um this three data sources uses this table and field bwtty is valation catagory can be founf in this datasources,
I hope this helps u,
Regards
Anil

Similar Messages

Unable to find the data source in r/3 ECC 6.0 - ( 0FI_GL_10 ) in RSA5

Hi guys,
I am unable to find the data source(0FI_GL_10) in RSA5.
Presently I am using BI7.0 version with R/3 ECC 6.0.
BI Patch level - 16.
BI content Patch level - 8
Thanks,
Gupta

Hi,
Try Installing Application Component Hierarchies
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Use RSA9 for this.
Hope this helps.
Thanks,
JituK

Installation error: cannot find the data source checking utility (dbcheck)

BO XI 3.0:
During the process of installing "Dashboard and Analytics Servers", we've got this error.
Installation error: cannot find the data source checking utility (dbcheck)
Have anyone encountered this issue? We can't move on after this error.
Thanks,

I've fixed the problem.
Lianjun.
Lianjun (guest) wrote:
: I've tried to run the latest beta version of OMWB to migrate
from
: MS SQLSERVER7.0 to Oracle8i. At step 4:Source Database Details,
: every time I put in the data source name (which is in the
control
: panel-ODBC data source Administrator), it gave an error message
: that Data source name not found and no default driver
: specified).Anybody has any ideas?
: Thanks for the help!
: Lianjun.
null

Can't Find the Data source 0GLACCEXT_T011_HIER

Hi,
i am working with B I 7.0, ECC 6.0.
Trying to Implement Balance Sheet for New General Ledger Account.
I can't Find the Data source for the Hierarchy 0GLACCEXT_T011_HIER
But Info object 0GLACCEXT is available and
i find the Infosource 0GLACCEXT ,but this is 3.5 version.
I check some SAP notes
663945 -- Transfer Rules for 0GLACCEXT Info object
but My B I Content is 703
Do I need to follow this SAP note ?
I had check this Link Too, but I uable to solve my problem
Re: 0GLACCEXT vs 0GL_ACCOUNT - How it is USED?
any Idea
Thanks
Prasanna

Pam,
BI 7 does not support hierarchy datasources. For implementing hierarchies (BI 7), you have to use BW 3.X infosources/transfer rules.
Hope that helps.
Thanks

How to find the Data source name on linux server

Hello All,
Good Morning...
I created a rpd in my local machine and deployed on the server through Fusion middle ware.
and copied the catalog file there in the server.
While working on my local machine I have two odbc connections... one is for development and other is for production.
at the time of deployment to the server I changed the development instance to production instance throught the connection pool.
I am encountering the following error while working on the analyis....
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified. (HY000)
I think this is because of the mismatch of the datasource name in server and my local machine...could you please tell me how to find the datasource names on the server?
Thanks!

Hi Dpka-
I created two ODBC connections in my system.
one for development and another for Production.
while deploying the rpd to the server I changed the development login credentials with production login.
The problem here is I just want to know whether Iam giving the same datasource name which was presented on the server or not.
I don't have access to the server now.
Is there any way to find out the datasource names which were presented on the server with the help of admin console?
Thanks!

Where is the data source configuration in Jdev 11g?

Does anybody know where is the data source configuration in JDeveloper 11g? I want to create a JNDI data source using the database connection. Do I have to login the Integrated WLS to create the data source? Thanks.

Hi Chris,
Configuring the data source in Integrated WLS works for me. Thanks for your help!
Looks 11g didn't create the data source automatically in the App Navigator. I checked the deployed application directory - "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\adf\META-INF" and "Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\TestDS\META-INF". I didn't find the data source file - data-sources.xml. Then I started the web application and checked the Context, I can only find the data source which I defined in the Integrated WLS. It is interesting that 11g removed the JNDI list from the RMI bindings.
Also thanks to Nick for the information. We are migrating a Spring Framework application to Oracle and don't use ADF Business Components in this project.
Huaichen

The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Unable to find a data source in RSA5 which can be seen in RSA3.

Hi there,
I am unable to find the business content data sources in RSA5, but I can find the same data sources in RSA3 (extract checker).
I need these data sources to be replicated to BW and take it up further.
Any light on the above issue will be of great help.
Thanks in advance.
Regards.

Guys
Regarding my previous messages, None of the posts where working out for me. I Had tried all the possibilites of your messages,but I am facing the same problem
1. I am unable to find data source in RSA5,But I had find the data in RSA3. Pls let me know how you guys what me to go. It will be really appreciated. pls let me know from ground level how do you want me to dig in to the issue.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Couldn't fetch the data from the data source...[nQSError: 16023]

Hi all.
I think that the problem I want to discuss is well-known, but still I got no answer whatever I tried ...
I installed the BIEE on Linux (32 bit, OEL 5 - to be more precise), the complete installation was not a big deal. After that I installed the Administration tool on my laptop and created the repository. So... my tnsnames.ora on the laptop looks like this:
TESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.5)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb)
And the tnsnames.ora on server, in its turn, looks like this:
TESTDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb.localdomain)
The database worked normally and I created and transferred the repository to the server and started it up.
It started without any errors, but when I tried to fetch the data via the representation services I got the error:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16023] The ODBC function has returned an error. The database may not be available, or the network may be down. (HY000)
I discovered, that the ODBC on my laptop was named not correctly (it should have been identical to tnsnames entry) - so I corrected it, saved and replaced the repository on the server and restarted it... - and still got the same error.
Apparently, something is wrong with the data source. So let me put here some more information...
My user.sh looks like this:
ORACLE_HOME=/u01/app/ora/product/11.2.0/dbhome_1
export ORACLE_HOME
TNS_ADMIN=$ORACLE_HOME/network/admin
export TNS_ADMIN
PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
and my odbc.ini looks like this:
[ODBC]
Trace=0
TraceFile=odbctrace.out
TraceDll=/u01/OracleBI/odbc/lib/odbctrac.so
InstallDir=/u01/OracleBI/odbc
UseCursorLib=0
IANAAppCodePage=4
[ODBC Data Sources]
AnalyticsWeb=Oracle BI Server
Cluster=Oracle BI Server
SSL_Sample=Oracle BI Server
TESTDB=Oracle BI Server
[TESTDB]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=SH
Catalog=
UID=
PWD=
Port=9703
[AnalyticsWeb]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
Catalog=
UID=
PWD=
Port=9703
[Cluster]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=local
Repository=
FinalTimeOutForContactingCCS=60
InitialTimeOutForContactingPrimaryCCS=5
IsClusteredDSN=Yes
Catalog=SnowFlakeSales
UID=Administrator
PWD=
Port=9703
PrimaryCCS=
PrimaryCCSPort=9706
SecondaryCCS=
SecondaryCCSPort=9706
Regional=No
[SSL_Sample]
Driver=/u01/OracleBI/server/Bin/libnqsodbc.so
Description=Oracle BI Server
ServerMachine=localhost
Repository=
Catalog=SnowflakeSales
UID=
PWD=
Port=9703
SSL=Yes
SSLCertificateFile=/path/to/ssl/certificate.pem
SSLPrivateKeyFile=/path/to/ssl/privatekey.pem
SSLPassphraseFile=/path/to/ssl/passphrase.txt
SSLCipherList=
SSLVerifyPeer=No
SSLCACertificateDir=/path/to/ca/certificate/dir
SSLCACertificateFile=/path/to/ca/certificate/file.pem
SSLTrustedPeerDNs=
SSLCertVerificationDepth=9
Can anybody point a finger where the error line is? According to the documentation it should work fine.Maybe the driver name is wrong? What driver I need then?
Cause I can't find it.
I'm really sorry to bother, guys :) Let me know if you get some ideas about it (metalink didn't help).

OK, several things wrong here. First the odbc.ini is not meant to be used for Oracle databases, that's not supported on Linux. On Linux you should OCI (Oracle native drivers) and nothing should be added on odbc.ini. Your user.sh seems to be pointing to your DB installation path. This is not correct. It should point to your Oracle client installation so you need to install the Oracle FULL client somewhere. Typically this is normally done with the same OS account as the one used for OBIEE whereas the DB normally runs with the oracle account. Once you got the client installed test it under the OBIEE account doing tnsping and sqlplus to your DB. Also the LD_LIBRARY_PATH should point to $ORACLE_HOME/lib32 not lib as the lib directory is the 64bits and OBIEE uses the 32bits libraries even in 64bits OSes. Finally change your RPD connection to use OCI. Make all those changes and you should be good.

Trying to change the data source for a Crystal Report.

The method below represents my best attempt to programatically change the data source of a Crystal Report. The goal is to have a routine that will update the data source for reports after they have been distributed to production servers. So far I have not been successful in saving the report back to the CMS. No exceptions are thrown, but when I view the Database Configuration of the report in the CMC nothing has changed.


Am I missing a step, or is there another way to accomplish this?


Thank you.

<hr />
<pre>
private void test(String reportName)
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects;
 IInfoObject reportObj;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dc;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB; //0;
 Fields connFields = null;
 String queryStr = "Select * From CI_INFOOBJECTS " +
 "Where SI_NAME='wfr.rpt' AND SI_KIND='CrystalReport' AND SI_INSTANCE=0";
 newInfoObjects = getCms().executeQuery(queryStr);
 if(newInfoObjects.size() > 0)
 reportObj = (IInfoObject)newInfoObjects.get(0);
 try
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dc = clientDoc.getDatabaseController();
 conInfos = dc.getConnectionInfos(null);
 for(int i = 0; i < conInfos.size(); ++i)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(i);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue("QE_ServerDescription", "alio");
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("Server", "alio");
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName("admin");
 newConInfo.setPassword("password");
 dc.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 catch(ReportSDKServerException Ex)
 String msg = "A server error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 catch(Exception Ex)
 String msg = "An error occured while processing the " + reportObj.getKind()
 + " object, " + reportObj.getTitle() + " (" + reportObj.getCUID() + "), from the CMS.";
 Utility.errorOut(msg, Ex);
 finally
 clientDoc.save();
 getCms().commitToInfoStore(newInfoObjects);
 clientDoc.close();
</pre>
Edited by: Mark Young on Sep 10, 2009 2:16 PM

<style type="text/css">
/<![CDATA[/
 body
 font-size: 1.125em;
 font-family: helvetica,arial,"sans-serif";
 .code{font-family: "courier new",courier,mono,monospace}
 .bi{font-style: italic; font-weight: bold;}
/]]>/
</style>
Justin,

Thank you for the reply. Time constraints have not allowed me to post back to this tread
till now. I will try your suggestion. My assumption is that Save the report back to the
info store refers to IInfoStore.commit(IInfoObjects).


I'm afraid that I do not understand why I don't want to change the report client document,
or why successfully exporting the report with the new login/password is not what I
want to do. Any explanation on that statement would be appreciated.


I did find a way to accomplish my goal. It involved adding the SSOKEY property to the
logon property bag. Below you'll see my revised code which modifies the report logon and
server. I have no idea what
this does, and SAP support has not been able to tell me why it works. However, what I
discovered is that if I changed the report option, Database Configuration -> When
viewing report:, in the CMS to Use same database logon as when report
is run from Prompt the user for database logon, then the
SSOKEY property had been added to the logon property bag having an empty string as its
value. This allowed me to successfullyupdate and save the modified logon back to the CMS.


So I took a chance and added code to always add the SSOKEY property with an empty string
as its value, and I could then successfully modify and save the report's logon info
and server. Again, I don't know what this means, but it has worked so far. If anyone has
some insight or comments, either are welcome. Thank you in advance.

 
<hr />
<pre>
private void changeDataSourceOfAWFCrystalReports()
 throws SDKException, ReportSDKException, java.io.IOException
 IInfoObjects newInfoObjects = null;
 IInfoObject reportObj = null;
 IReport curReport = null;
 ReportClientDocument clientDoc = new ReportClientDocument();
 DatabaseController dbController;
 PropertyBag pBag;
 PropertyBag logonProps;
 ConnectionInfo newConInfo;
 ConnectionInfo oldConInfo;
 ConnectionInfos conInfos;
 int connOptions = DBOptions._ignoreCurrentTableQualifiers + DBOptions._doNotVerifyDB;
 Fields connFields = null;
 String outputStr;
 int numOfReports;
 int numOfQueryPages;
 double progressIncrementPerPage = 30;
 int progressIncrementPerReport = 0;
 // Path query to reports is in a .properties file.
 String queryStr = getAppSettingsFile().getWscAwfCrystalReportPathQuery();
 try
 // Executes IInfoStore.getPageingQuery() and generates a list of queries.
 getCms().setPathQueryQueries(queryStr, 100);
 numOfQueryPages = 0;
 // Gets a List<String> of the IPageResult returned from IInfoStore.getPageingQuery().
 if(getCms().getPathQueryQueries() != null)
 numOfQueryPages = getCms().getPathQueryQueries().size();
 if(numOfQueryPages > 0)
 // Use 30% of progress bar for the following loop.
 progressIncrementPerPage = Math.floor(30.0/(double)numOfQueryPages);
 for(int queryPageIndex = 0; queryPageIndex < numOfQueryPages; ++queryPageIndex)
 // Gets the IInfoObjects returned from the current page query
 newInfoObjects = getCms().getPathQueryResultSetPage(queryPageIndex);
 numOfReports = newInfoObjects.size();
 if(newInfoObjects != null && numOfReports > 0)
 progressIncrementPerReport =
 Math.round((float)Math.floor(progressIncrementPerPage/(double)numOfReports));
 for(int reportIndex = 0; reportIndex < numOfReports; ++reportIndex)
 reportObj = (IInfoObject)newInfoObjects.get(reportIndex);
 curReport = (IReport)reportObj;
 clientDoc = getCms().getReportAppFactory().openDocument(
 reportObj
 , OpenReportOptions._refreshRepositoryObjects
 , java.util.Locale.US);
 dbController = clientDoc.getDatabaseController();
 conInfos = dbController.getConnectionInfos(null);
 for(int conInfosIndex = 0; conInfosIndex < conInfos.size(); ++conInfosIndex)
 oldConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 newConInfo = (ConnectionInfo)oldConInfo.clone(true);
 pBag = newConInfo.getAttributes();
 pBag.putStringValue(
 "QE_ServerDescription"
 ,getConfigFile().getDBDataSourceConnections());
 logonProps = new PropertyBag();
 logonProps.putStringValue("Trusted_Connection", "false");
 logonProps.putStringValue("SSOKEY", "");
 logonProps.putStringValue(
 "Server"
 ,getConfigFile().getDBDataSourceConnections());
 pBag.put("QE_LogonProperties", logonProps);
 newConInfo.setUserName(getConfigFile().getUNVConnectionUserName());
 newConInfo.setPassword(getConfigFile().getUNVConnectionPasswordDecrypted());
 dbController.replaceConnection(
 oldConInfo
 , newConInfo
 , connFields
 , connOptions);
 newConInfo = (ConnectionInfo)conInfos.getConnectionInfo(conInfosIndex);
 } // end for on conInfosIndex
 clientDoc.save();
 } // end for on reportIndex
 } // end if on newInfoObjects
 } // end for on queryPageIndex
 } // end try
 catch(ReportSDKServerException Ex)
 // handle...
 catch(Exception Ex)
 // handle...
 finally
 getCms().commitToInfoStore(newInfoObjects);
 if(clientDoc != null)
 clientDoc.close();
</pre>

Related to the Data Source 0EC_PCA_3

Hi BI Gurus,
Could any one let me know to find the data in a data source if we r not authorised to use the T Code RSA3 (Extractor Checker).
The problem is: We have a Query built on Multi Provider into which the Profit center data is not coming for some recent months.
What is the Root cause analysis we need to find out why the data is not coming in the Report.
Data flow is like...Source Sys ---> ODS -
> Several Cubes (around 7) -
> Multiprovider built on these Cubes ---> A Query is built on MP....
In the BW side, there is no problem...So we need to check in R/3...Please help in finding a Solution for this problem.

Hi,
Source Sys ---> ODS -
> Several Cubes (around 7) -
> Multiprovider built on these Cubes ---> A Query is built on MP
now let's start from BW
1.can you check in cubes with the selection whether the data is present for for 7 th month (which is actaully missing)
if no data was available
2.chk in ODS with selection
still you didn't find any data
the only soultion is to check in source sytem
now you don't have rsa3 authorization
is there any way you can sit with basis to get the authorization
if not since it is delta,the only soultion strikes to me is
run full repair to ODs by giving selection in fiscperiod field(7th month)
if not the last option is
go for re-initialization
Cheers,
Swapna.G

How to find out data source for a datawindow?

I have a datawindow and I want to identify it's datasource.
I open this datawindow in pb. then in design menu, Data Source is disabled. It means not direct sql
Then I go to Column Specific(small window), and right click on any space, in the popup menu, there is no 'Stored Procedure...'. It means not procedure.
(see screeshot attached)
then how to find out the data source for this datawindow?

Hi Kent;
1) I would use the RHMB on the DWO in the System Tree and select the "Edit Source" option.
2) In the DWO source, locate the "TABLE ( ...." line
3) If the next major line starts with "DATA(...." then this is an external DWO.
4) If the next major line starts with "Retrieve(...." then this is a normal DWO (SQL or SP based).
5) If the next major line starts with "webservice=(WSDL...." then this is a Web Service based DWO.
Note: if your DWO has no #3, 4 or 5, then its external.
HTH
Regards ... Chris

Programatically change username and password if the data source

Hi all,
I searched but could not find the answer for how to programamtically change the username /password of the datasource created by the Servers tab under JSC2.
My database is Oracle and I use the logins to specify the security policy. So I would like to be able to use the username/password when the user logs in and use these info to make the connection to the database server instead of the ones I provide when creating the data source.
Thanks for your advice,
DT

The username/password can be set for the datasource via the CachedRowSet created for the datasource.
For example if you drop the sample Travel->person table on the visual designer a "personDataProvider" is created. Here's the code to set the username/password.
personDataProvider.getCachedRowset().setUsername("me");
personDataProvider.getCachedRowset().setPassword("mypassword");-David

I want to fill the data source 0CO_OM_WBS_3 from COSP table.

Hi,
I am working on Plan and actual for cost controlling, I need to fill the data source with data from COSP table.
Please give me the steps for this. I checked in RSA3 for data source it don't have any data, but the corresponding table COSP having data.a
Thanks
Durg

Hi,
See the following DataSources for requirements,
0CO_OM_WBS_1                      WBS elements: Costs
0CO_OM_WBS_2                      WBS elements: Budget
0CO_OM_WBS_3                      WBS elements: Overall plan
0CO_OM_WBS_4                      WBS elements: Statistical key figures
0CO_OM_WBS_5                      WBS Elements: Selections
0CO_OM_WBS_6                      WBS Elements: Actual Costs Using Delta Extraction
0CO_OM_WBS_7                      WBS Elements: Commitment Line Items
0CO_OM_WBS_8                      WBS Elements: Budget Line Items
Use 0CO_OM_WBS_6 for Actual , bcoz it is having Delta Option for Plan you can go 0CO_OM_WBS_2 or 0CO_OM_WBS_3. See the SAP Help on that.
http://help.sap.com/saphelp_nw04/helpdata/EN/08/47c6f8bc1db04a84c9185954208ee7/frameset.htm
In this help you can find complete details of the Tables, you can see help for all above DataSources.
Thanks
Reddy

Finding the data source

Similar Messages

Maybe you are looking for