Finding the empty field in table control of the infotype 8

Hi to all experts,
MY requirement is to populate a wage type and its value for infotype 8 after some calculations . i have to append the values to the list box of basic pay at the last . but im facing problem how to determine dynamically which row will be empty and append it to that row. I have written this code ........... unable to proceed forward.
data: val type i.
   DO 40 TIMES VARYING <fs_wages>-lgart FROM i0008-lga01 NEXT i0008-lga02
                     VARYING <fs_wages>-betrg FROM i0008-bet01 NEXT i0008-bet02.
   IF <fs_wages>-lgart IS INITIAL.
     CONCATENATE '0' sy-index INTO val.
     i0008-lga04 = '2108'.
     i0008-bet04 = w_tot.
   ENDIF.

>
mohammed abdul hai wrote:
> Hi to all experts,
> MY requirement is to populate a wage type and its value for infotype 8 after some calculations . i have to append the values to the list box of basic pay at the last . but im facing problem how to determine dynamically which row will be empty and append it to that row. I have written this code ........... unable to proceed forward.
>
>
data: val type i.
>
>    DO 40 TIMES VARYING <fs_wages>-lgart FROM i0008-lga01 NEXT i0008-lga02
>                      VARYING <fs_wages>-betrg FROM i0008-bet01 NEXT i0008-bet02.
>
>    IF <fs_wages>-lgart IS INITIAL.
>      CONCATENATE '0' sy-index INTO val.
>      i0008-lga04 = '2108'.
>      i0008-bet04 = w_tot.
>    ENDIF.
    IF <fs_wages>-lgart IS INITIAL.
*      CONCATENATE '0' sy-index INTO val.
      <fs_wages>-lgart = '2108'.
      <fs_wages>-betrg = w_tot.
    ENDIF.
At the enddo statement, these values will be written back, see online help:
If the processing block is not exited within the loop, the content of the variable dobj at the end of the loop run is assigned to the previously assigned data object dobj1 or dobj2 without conversion.

Similar Messages

Problem with the date field in Table Control

I have created a table control in my module programming. One of the column in the table control is a date field which is I/O field.
Now if I enter a value in date field column and hit enter the date field is reset. I dont want the field to get reset and accept valid date field.
I have set type of the column as DATS and I havent used any dictionary fields. The column is from the internal table in the program.
Please suggest

In your PAI, in the LOOP AT <itab> did you
- check date validity
- update internal table
* Sample
LOOP AT itab.
FIELD itab-field MODULE checkfield.
MODULE updateitab.
ENDLOOP.
Look also at SAP documentation like [Table Controls|http://help.sap.com/abapdocu/en/ABENTABLE_CONTROL1_ABEXA.htm] or [Table Controls in ABAP Programs|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac9f35c111d1829f0000e829fbfe/frameset.htm]
Regards,
Raymond

How make display only the amount field in table control(infotype 0008)

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

How to prvide f4 help for the particular field in table control

hi all,
my requirement is iam having one i/p field in screen 100.name of the field is sales order number. i just want to keep f4 help for this field only.when i click F4 on this field it has to show all the sales order numbers from vbak table.
anybody can send me the code please.
thanks,
maheedhar.t

Hi,
In POV Modlue u write
Filed (ur field name ) module get_values.
In that get_values module u declare an itab according to ur requirement and get the values into internal table using select query .After u get the values in select query u call a function popup_with_table_display in which u pass the itab along with the starting and postion , width and height of the popup window .Hope this will help u
Regards,
Shafi

Export all data of selected line in search help to fields in table control

I've created a search help which will export 4 fields. These 4 fields should be populated to the corresponding fields in TABLE CONTROL. However, in my program, only the first column is populated and the others are blank. How to solve this problem? Do I need to include POV? Thank you.

Hi,
1. Create a search help with four exporting parameters.
    ( check the you have created properly the sterp step
     procedure in creating the search help).
2. No need to go for POV.
3. After creating the table control assign the fieldnames into
   the control, then click on the fieldname it will show the
   attributes of that field . ther you can find te search help field
   fill that field with your search help name .
4.After assigning the field, check it in executing the report.
      Hope this will work for you, if it is not let me know.
      Reward points if it is helpful .
Regards,
Madhavi

How to add a field and table control to BP transaction.

Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.

Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar

Adding custom fields in table control of infotype 0591

Dear Experts,
My requirement is to add custom fields x y z in the Table contol of the standard infotype 0591 (Nominations) screen in PA30 tcode.
Is it possible to add the fields in table control after the fields share,guardian's address, without using access key.
if so, help me to know the procedure.
Please suggest.
Warm Regards
Sinde.

hi..
a thread already exists with the same Subject.. pls check if it helps u....

Getting data from table control to the report program.

Hi,
I created a table control using report program and i am trying to enter data in the table control which i want to update in the DB table. How can i get the data entered in table control to the report program, so that i can update the DB table.
Please help me finding out which variable will hold the data entered in table control(dynamically).

hi,
in your table control you give some name to that table control say it_cntrl.
this only serves as the internal table to process the table control data.
like u can write like this.
loop at it_cntrl into wa_cntrl. "wa_cntrl is work area of type it_cntrl table type
......... "do your functining
end loop.
any clarification get in touch
thnks

Dynamicaly setting SCREEN-INPUT field in TABLE CONTROL

hai guys,
in my table control i have REFNUM field and some other fields.
now my task is,
in every row,i have to enable the REFNUM field of table control for editing only if REFNUM is blank.
else i shud disable it.(when REFNUM is filled).
all other fields should be always disabled.
(right now,i am just able to either totaly enable the entire REFNUM coloumn or or totaly disable it for editing,irrespective of the values it is holding.)
shravan ramidi

is this not possible?
can some one confirm it..

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

To Disble the Field in Table Control after clicking Save button

Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.

hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      fl = 1.
      GET CURSOR LINE lin.
ENDCASE.
ENDMODULE.                 " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
    IF tab1-current_line = lin AND fl = 1.
      screen-input = 0.
    ELSEIF tab1-current_line < lin.
      screen-input = 0.
    ELSE.
      screen-input = 1.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
    DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE.                    "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM

How to add a field in a table control of the subscreen 6103 of tcode f-03

hi abap gurus....i m new to abap and this is my first post ..i m hoping for a reply soon as it is urgent....
my requirement is to add a field PAYR-CHECF to a table control of the subscreen 6103 of tcode f-03

Hi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
-   Maintain/supply your own customer fields
-   Update your own customer-specific tables
You cannot:
-   Change standard fields
-   Change data that depends on the document header in the items
-   Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit

How to know no of selected fields in Table Control in at the first iteratio

Hi ABAP Gurus,
I have developed screen with Table control. At one particular scenario, I need to
display an error message if all the displayed records are not selected. So I need to know the No of selected fields on the Table control in the very first iteration of the Loop in PAI event. Is there any Function Module/Method or any other way to Achieve this.
Thanks in Advance..
Regards,
Vishwanath

You can simply count them, but looping the table and checking the "select" flag.
data: records type i.
data: counter type i.
clear counter.
Loop at itab where sel = 'X'.
counter = counter + 1.
endloop.
describe table itab lines records.
if records <> counter.
message e001(00) with 'Not all records were selected'.
endif.
Regards,
Rich Heilman

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

How to add new field to table control data not displayed

hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishant

First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen.

Finding the empty field in table control of the infotype 8

Similar Messages

Maybe you are looking for