Finding the related field for "Leave Type" from the BI content in HR modul

Hi good after-noon!!
Can any one help me out in finding the related field for "Leave Type" from the BI content in HR module?
Regards,
Suman.

Hi Suman ,
U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
Regards
vamsi

Similar Messages

Where can I find the serial number for LOGIC PRO from the AppStore

Please help me:
Where can I find the serial number for LOGIC PRO from the AppStore?
I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

How do I overcome the Failed Downloads for Instant Movies from the Adobe Server?

I have a Windows 8.1 PC , Premiere Elements ver. 12, and I have a dedicated DSL for computer only. In my best efforts, even when disabling McAfee completely, I have had almost 4 days of frustration trying to download an Instant Movie from the online content server. At times the DL works, slowly, then it pauses, sometimes the DL reverses the count and I lose 10mb and it resumes (I have never seen that before). Most frustrating is when the DL is nearly complete and the message pops up that I need to check my connection as the download has failed. I have 1.6TB disc space, and no restrictions in place at my end. I tried from 2 of the PCs, both Win 8.1. I have tried at all hours of the day for traffic on the server, but that doesn't seem to matter. I have attempted the Secret Agent file DL at best 10x. Is there a setting I need to change to receive this content, or go to a different site where I can directly access this content?
I have purchased Three PE 12 programs for 3 replacement PCs and I need some real direction.
Thank you, Jerry

Jerry W B
There will be those that report Content download of a few minutes. Although we are happy for them, many have found that this is not usually the case. Download of the Premiere Elements 11 and 12 Content download is often a slow process which demands a lot of patience whether the download be "Download Now" or "Download All". Just two of the factors in this situation are the Internet Speed/Status and the status of the Adobe Server. Many times it is time of the day.
http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
http://atr935.blogspot.com/2013/12/pe12-content-download-considerations.html
I have DSL Service on the east coast of the USA. It is now about 6 pm Saturday February 22, 2014.
I right clicked the blue ban at the top right corner of the Instant Movie thumbnail for the Secret Agent theme. I selected Download Now to download just that one Instant Movie theme.
a. The file size was given as 75.8 MB, not 118.7 MB. It took 11 minutes and 19 seconds to download that Instant Movie.
I checked the download on two different computers, one Windows 7 64 bit and the other Windows 8.1 64 bit. The Instant Movie Secret Agent had a file size of 75.8 MB according to the download pop up in the opened project.
b. If you are talking days for this download, then I would first check with your Internet provider. There is no other place for these downloads except from within the program. And, when you do get them, I would encourage you to save them as per my blog posts on this topic to avoid having to go through an labored downloading processes again.
Do you find the downloading of Content to be the same for all the other categories requiring this type of download, not just Instant Movies?
Please review and update us on your progress.
Thank you.
ATR
Add On...Although you did say that you disabled McAfee, be advised that McAfee's recent update(s) have created some serious problems for Premiere Elements. So, I would re-evaluate McAfee's possible role in all this along with the firewalls settings.

Just put my i-tunes library on a 2nd hard drive, how do I easily change the location where the program looks for current songs from the C:/ drive to the new drive without going thru each song individually in the "get info" tab

I just installed a new hard drive and transfered my i-tunes library to the new drive. How can I make a bulk change of the location the program looks for the current songs. I know you can do it song by song from the "get info" tab but I need to do it for all 4500 songs. I have already changed the location that new files are stored to the new hard drive.

The pop-up lets you connect to the library file, iTunes Library.itl, on the external drive. This will, in turn, automatically update the preference for the iTunes Media folder to be the iTunes Media or iTunes Music folder inside the iTunes folder on the external drive and it will update the locations of all the content inside the media folder so that it uses the version on the external drive.
This works seamlessly if all iTunes content was inside the iTunes Media (or iTunes Music) folder (which was itself inside the iTunes library folder) before you moved/copied the iTunes folder. For content outside the iTunes Media folder iTunes should remain connected to the original location. These files should be consolidated (before or after the move/copy) and in addition, if available the library should be upgraded to the newer layout which places iPod Games and Mobile Applications inside the media folder instead of the library folder. (File > Library > Organize Library...)
For split libraries there are methods to rejoin them before moving (preferred) or repairing after the fact (e.g. my script) which I can go into if needed.
tt2

What is the return policy for products purchased from the US iStore?

Hi. I purchased a product fro an iStore in New York city (Apple Airport express). Actually required a router and was advised by staff it was a router (it is infact a wifi base station that will plug into an existing router). I'd like to return it/exchange it?

The AirPort Express is a router. It is not a modem. If you want the AirPort Express router to be able to connect to the Internet, you will need a separate modem to use with the AirPort Express. Check with your Internet Service Provider to see if they can supply you with a modem, or recommend a modem that you could purchase at a store
If I plug my telephone cable into it will it act as an ADSL modem?
No
Some products, which are called modem/routers or gateways, combine a modem and and a router in one package. If you want a device like this, you should return the AirPort Express for a device of this type.

I am moving to the U.S. for a year, from the UK. Should I get an iPhone here (UK) or wait until I'm there?

I am moving to the U.S. for a year, after which I will be returning permenantly to the UK. I am going to buy an iPhone, but am unsure whether it would be better to buy it here, or when I get over there?
Hopefully the phone will last for more than a year!

If you do buy before you go do not worry about your warrenty as Apple should still support iy as all you need to prove is that you bought it while you were a resident in the UK. Why companies do not like to support other contry warrenties as they wany to stop grey imprts. In your case you are a UK citezen going to the US for a year and they should support it. Though like most users you probably will not need this option.
Buying before you go means that when you return to the UK you will still be able to use your phone here in the UK. The US carries like 2 + year contracts and tend to be more expensive than UK contracts. Not sure if they have as many deals as we do have in the UK.

BDOC's to update the custom fields in R/3 from the CRM sales order

Dear All,
I need a small help.
My requirement is as follows.
When ever a sales order is created in CRM, an outbound delivery will be automatically created in the R/3 system.
There are some fields in the CRM sales order which are not there in the R/3 system.So I have to create these fields in the LIKP and LIPS tables in R/3 which is not a problem.
But I have to copy these fields from CRM to the LIKP and LIPS tables in R/3 when ever a sales order is created and saved in CRM. (This should happen automatically)
So could anyone tell me whether there are any BDOCs available to update the sales order info in the LIKP and LIPS tables and also any BADI which can be trigger for this purpose.
Thanks in advance.
Regards
Shafath

Hi,
Thanks a lot. You have given a good solution.
But a small correction.
Sales Order is not transferred from CRM to R/3. The system is creating (automatically) a delivery in the r/3 system for the sales order created in CRM (Here we will not have the sales order in R/3), so we dont have an entry in VBAK and VBAP tables.
When we create a sales order in CRM and save , the delivery in R/3 is created and the sales order is not transferred to R/3.
So while saving the sales order itself in CRM, I need to trigger a badi to update the LIKP and LIPS tables by calling a RFC (which needs to be developed in R/3).
So I need a badi which triggers when the sales order is saved and which tells whether the sales order is saved without errors or not (because delivery in R/3 is created for only those orders which are created and saved without errors in CRM) and returns the sales order number.
It will be helpful if you can send some info on this.
Any how thanks a lot for your quick response.
Regards
Shafath

What is the max resolution for external monitors from the intel hd 4000 graphics driver

What is the max resolution supported by the intel hd 4000 graphics driver found on the 13in MacBook Pro for EXTERNAL monitors?

OK so after doing much research... this seems to be the best workflow.
Bring HDV in to FCP as ProRes 422.
Edit show... add bells and whistles, etc.
Export movie as ProRes 422.
Then for the client - ensure that they have latest version of Quicktime and download the Apple ProRes Quicktime Decoder (for mac or Windows). (It is assumed they have a decent computer to play back on.)
The client will then be able to play a movie encoded as proRes 422 and all will be happy.
As a back up a high resolution h264 file can't hurt.
Thanks for everyones input. We got there in the end.

I bought bought my Macbook pro after 7th of June, and the store told me that i will get the Lion OSX for free, but from the app store, it is asking me to buy?

I bought my Macbook pro after 7th of June, and the apple store employee that sold it to me told me that i would get the OSX lion as a free update, however, whenever i try to update, it is asking me to buy! Anyone knows how to solve this problem?

Check out this link:
http://www.apple.com/macosx/uptodate/
Cheers

Needed: Script to copy Photo album name into the comments field for pix

I was never in the habit of applying anything to photo comments, but gave my albums a desriptive name so I knew what they were. Now I wish I had because album titles are not searchable. I'm wondering if anyone knows how to create an Automator workflow or Applescript that could take the Album Name and apply it to the comments field for each picture in the album. I have over 25,000 pictures and quite a few albums. I've started to do it manually for each album but would love to find a quicker way to accomplish this.
Thanks.

This should do the trick for you:
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "iPhoto"
set theAlbums to (every album)
repeat with thisAlbum in theAlbums
set thisAlbumName to the name of thisAlbum
set thePhotos to (every photo of thisAlbum)
repeat with thisPhoto in thePhotos
set comment of thisPhoto to thisAlbumName
end repeat
end repeat
end tell</pre>
FYI, it will step through every album; get its name; and then step through every photo in the album and change the comments to the album's name.
I recommend that you make a back-up before proceeding!

How to get the field type from the database dictionary in screen painter

hi,
I wanted to create a new input field that input field should have the data element from the structure that i have created. How to get the data field type from the database dictionary in the screen painter

hi
good
there is two kinds of evernt
PROCESS ON HELP-REQUEST
PROCESS ON VALUE-REQUEST.
which ll help you to give two types of help one is f1 help and another one is f4 help
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/e07f622b9911d2954f0000e8353423/content.htm
thanks
mrutyun

HT1391 Is there a way to find the serial number for a devise from ITunes? I need it to try and track it as it was stolen

Is there a way to find the serial number for a devise from Itunes? I need the number for a device that was stolen.

How to find serial number

CCP related: A timeout occured waiting for a response from the ECU

Hello All,
            I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
       Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
    Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
-Lucky.

Hello,
          I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
I am sending you a link which gives you some insight about the installation of CCP command set and the use of the toolkit with the USB CAN hardware.
http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
Attachments:
can manual.pdf ‏1437 KB

Regarding the exact link for configurate type for leave request

Hi all:
I am trying to Customize Types of Leave/ Absence Types for Leave Requests following the route Personnel Management u2192 Employee Self-Service u2192 Service-Specific Settings u2192 Working Time u2192 Leave Request u2192 Processing Processes u2192 Specify Processing Processes for Types of Leave, but it turns not be there, maybe it is because of the sap version, could you please tell
me the exact route for Customize Types of Leave/ Absence Types ?
thank you very much

sorry , the above link is correct , I found the above linke missing like personnel management--employee self-servce, because Basis didn't delopy some pakcage , could you please tell me what package missed.
thank you very much .
Edited by: jingying Sony on May 7, 2010 7:58 AM

Selecting the Subinventory for orders shipped from the LAO warehouse

Experts,
We will need to begin selecting the Subinventory for orders shipped from the LAO warehouse. Can we make this a required field at order entry? If so, can we set up a default value at the customer level as well?
Please suggest me how to setup.
Thanks,
JP

Prakash,
Subinventory is not an attribute of the header so you can't default to header and then from header to line, you have to do it directly to the line. You have 2 alternatives:
1) if this only relates to 2 or 3 key accounts you could create a validation template for each of these accounts:
Name = Cust1 Subinv
Attribute = Customer
Value String = Customer1 name etc.
... and a rule for each using the relevant template as a defaulting condition:
Source type = Constant Value
Source/Value = Subinv for Customer1
2) a PL/SQL procedure which looks at a DFF against your customer, picks up the subinv code and defaults that to your line. You need to reference the package name and procedure name from your defaulting rule. You'll probably need some tech assistance with writing this if you're not familiar with PL/SQL.

Finding the related field for "Leave Type" from the BI content in HR modul

Similar Messages

Maybe you are looking for