Finding the right effect

i am trying to fit the end of a song which has a break down effect at the end of it so i want to use an effect to match, i know in my mind what i want it to look like but am unsure if it is achievable with fce?
i want to make it look like the footage is flickering as if it were the end of a reel in a projector, so it looks like it is scrolling up and running out a frames
does anyone know how to do this?
hope you can understand what i am trying to describe

Have a look at the demo at bottom of site..
http://karsten.schluter.googlepages.com/filmstrip
advice on my site is for iMovie-users, but the basic principle (=a fast vertical pan plus some 'burn'/overexposure) is do-able in FCE either...

Similar Messages

24P plug in on YouTube? Finding the right export setting

I am using a Nattress Film Effect to get 24P of my video which is shot on DV 16X9. I am using GFilm Extra, and it's looking like crap on YouTube. YouTube prefers mp4s and I have spent days experimenting with different frame rates and standards conversions to try to make it work. It's probably got something to do with interlacing, but also something to do with the mp4 conversion process, which makes the 24p a little stuttery, which is exaggerated when it gets compressed by YouTube. I have discovered however, that if I make a Quicktime mov file that is below 1 Gig, that it actually looks okay on YouTube. I have been using Quicktime conversion to get there, but I have tried several variations and am unable to find a setting that will do it correctly. I have been trying DVCPro50 NTSC, and one of the settings is either 4:3 or 16X9. If I select 4:3 and then select anamorphic, the actual settings are 720X480 anamorphic, so when I upload it to YouTube it looks great but it's stretched. It looks fine when I see it in Quicktime but when I upload it it is stretched. If I select 16X9 and then use a custom frame size to make the file smaller, then it always ends up as 853X480, which is 16X9, but about 1.62 Gigs. I'm trying to make a less than 1 Gig anamorphic 16X9 mov file that will look halfway decent on YouTube, and because of the interlacing, it would probably be better if it was progressive, although it seems fine with the interlace .mov version. There are several examples of the problem now at http://www.youtube.com/metapunker (the video is Marielle) if you want to see the problem. I have been exporting a lot of different versions but I haven't found a winner yet, and am hoping that you have some ideas.

I tried a variation on that theme by exporting the sequence and then bringing it back into a 23.98 sequence, and standards converting it into a 23.98 finished product. The only problem then was flag edits, which are even more obvious and jarring when it goes to YouTube. If you want to see what I'm talking about, go to:
http://www.youtube.com/watch?v=EI-2cNZx8JM
The first one happens approximately 30 seconds into the video.
It works with a .mov if I can just find the right setting to make a small enough file to upload to YouTube. If you want to see the stretched version, go here:
http://www.youtube.com/watch?v=UkjKTyyqFNE
This is a .mov 720X480 anamorphic which is what happens if you select 4:3 and then check the anamorphic button. It looks fine in Quicktime, but it is stretched on YouTube.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

HT1443 I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer. How do I find the right item to download?

I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer. How do I find the right item to download?

There is no download; you need to buy a Mac OS X 10.6 DVD.
(83218)

Finding The Right App

im having trouble finding the right app for my ipad. i will spend money and everything, but there are just no good apps out there. the type of app i want is a creation app, sort of like google sketchup, or even better, something like cinema 4d. ive never seen any app come even close to anything like that. i just like making and designing things. i play the game "Soundrop" alot because you just simply create lines into creative little structures and paths for the balls to bounce. if they ever came out for a line rider for the ipad i would probably pay $50+ just for that one app which already exists on the iphone but sadly not on the ipad...does someone have any suggestions for any apps that you think i would like?

if they ever came out for a line rider for the ipad i would probably pay $50+ just for that one app which already exists on the iphone but sadly not on the ipad
Sure it is. $2.99
-> Line Rider HD

HT4539 I have 2 year old I-phone 4 that has never been updated. I need to download an update from my computer but can not find the right place on the I-Tunes page. Do you know where is the right place to update a phone that does not have an "update" butto

My (old, never updated) I-phone has no "update" button in Settings and I would like to update it. I can not find the right place on I-Tunes to download the updates. Do you know where to look?

Update your iPhone, iPad, or iPod touch - Support - Apple

How to find the right kstat info & interpret it ?

Having found out how to read the kstat structures I am
still struggling with finding the right information which
makes sense!
I am interested in the following statistics:
0. Swap Space - similar to that reported by swap
1. Scan rate similar to that reported by vmstat
2. Handspread page (see Adrian Cockcrofts' performance monitoring articles)
3. Disk Space Usage - similar to df -k
4. Process memory usage -- ps
5. System Error Messages -- this may not be possible to read at all
from kstat. Probably here I will have to make do with reading /var/adm/messages
6. Disk Errors -- similar to iostat -E (Solaris 2.6 onwards)
7. Ethernet stats -- like netstat -I le0
I found the following article on SunSolve Online: FAQ 1230 'Three Virtual Memory Performance Monitors' which directs me to some of the kstat cell
types.
I started with swap space. The above article plus a few other pointers seemed to indicate the the
correct kstat struct and field to use here was vminfo.swap_avail
When I compared the figures dumped from this structure with those reported by vmstat & swap they
did not compare! eg.
kstat: vminfo.swap_avail 321393372929
kstat: vminfo.swap_free 33339822544
vmstat unix tool:
swap avail (KB) 19932
Furthermore sysinfo.h indicates that vminfo.swap_avail is expressed in pages.
1 page = 4.096 KB, so the kstat figures should be multiplied by 4 which makes
the comparison even worse. Whilst I don't expect the figures to be
an exact match -- I was hoping they would be in the same ball-park,
Next I tried page in/page out rate
Here I compared:
kstat: cpu_vminfo.pgpgin 473224
kstat: cpu_vminfo.pgpgout 14554
vmstat unix tool:
pi (page in) 4
po (page out) 0
These figures sort of match up, if you take the most sig digit in
vminfo.
I was wondering if anyone has a definitive list on what are the best
kstat fields to use -- and if any wierd and wonderful calculations must
be performed on any of them to get figures close to that supplied by
the familiar unix tools.

Hi!
I wrote a quick program to read the vminfo stats and like you saw completely crazy figures. I looked further into this and found that every second, the system clock routine adds the freemem, swap and so on to a cumulative total.
To put it another way, the figure you see for free memory is the sum total of the value of freemem sampled every second since your system booted.
Thus, to get the average freemem in pages since boot, you need to read the value of freemem and divide by the number of seconds since boot.
You can derive the number of seconds in two ways from the kstats:
(1) read lbolt (incremented every 100th sec) and divide by 100 (hz)
or (2) read sysinfo.updates (which is incremented every time the kstats are updated).
I have attached a sample program that demonstrates both of these and reports average freemem since boot in K (like vmstat).
Similarly, to get a 5 second average, take two readings of freemem and sysinfo.updates five seconds apart , then calculate
(freemem2-freemem1)/(updates2-updates1)
It seems most, if not all, of the system counters are cumulative in this fashion.
Hope that helps.
Ralph
SUN Developer Technical Support
<pre>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <kstat.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/sysinfo.h>
#include <stdio.h>
main()
kstat_ctl_t *kc;
kstat_t *vminfo_ksp;
kstat_t *system_misc_ksp;
kstat_t *sysinfo_ksp;
kstat_named_t *lbolt_knp;
vminfo_t vminfo;
sysinfo_t sysinfo;
int hz;
int ltime;
ulong_t updates;
if ((kc = kstat_open()) == NULL)
perror("kstat_open failed"); exit(1);
/* get lbolt and divide by hz to get secs since boot */
system_misc_ksp = kstat_lookup(kc, "unix", 0, "system_misc");
kstat_read(kc, system_misc_ksp, NULL);
lbolt_knp = kstat_data_lookup(system_misc_ksp, "lbolt");
hz = sysconf(_SC_CLK_TCK);
ltime = lbolt_knp->value.l/hz;
/* get number of statistic updates so far (=secs since boot) */
sysinfo_ksp = kstat_lookup(kc, "unix", 0, "sysinfo");
kstat_read(kc, sysinfo_ksp, &sysinfo);
updates=sysinfo.updates;
printf("lbolt time %d\n",ltime);
printf("updates %d\n",updates);
/* get vminfo */
vminfo_ksp = kstat_lookup(kc, "unix", -1, "vminfo");
kstat_read(kc, vminfo_ksp, &vminfo);
printf("freemem %lld\n",(vminfo.freemem*4)/updates);
printf("freemem %lld\n",(vminfo.freemem*4)/ltime);
</pre>

A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
Any ideas?

I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
The problem is dependent on the state of both settings.
The spacebar in Mail "works" if I have either of the following setting combinations:
Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
Other combinations FAIL
Keyboard: smart quotes ON, Mail: Check spelling NEVER
Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
Thanks.
Todd Smithgall

Finding the right htmlBusiness page

Hi,
we are on WAS 700 with internal ITS.
I am dealing with SRM EBP templates and I can't find the right htmlBusiness source .
From the html source code of the page rendered in the webbowser I get the info that my page is
 

 

Looking at it in the ABAP Workbench I can find an entry which seems to be responsible for the peace of source I have to change - its a subscreen:
Look at this:

`if (gs_screen-subgeneral-EXT_SCR_TYPE.value == "ACCO")`
`BBPXBoxBegin(TITLE-ACCOUNTING.label, BTN_SUB_GENERAL_CLOSE.okcode )`
 `includeFrame (~frameName="gc_sub_general")`
`BBPXBoxEnd()`
`end`
The Dynpro 100 infact has a subscreen called gc_sub:general.
The Question is: Where do I find the html Version for the subscreen. It includes icons, which I need to replace.
I notice that there is this function BBPBoxBegin which might also be responsible for my source. Didn't find it yet, either...
Thanx a lot,
Matthias

Sorry - just found the source - it is in the BBPXBox function, which I just found...
thanx anyway, kind regards, matthias

Finding the right harddrive?

Hi!
I am trying to find the right HD to swap with my current 160GB. The criteria are simple. At least 500GB and 7200 RPM.
However I don't know which are compatible. I have a 15" MacBookPro (ver. 2,2) 2,16 GHz Intel Core Duo 2 from January 2006, with 4 GB Ram installed. I wan't to make a clean install with Snow Leopard once the disk is up and running. But which to chose. It seems there are a lot of problems with the Seagate Momentus so I was looking at this one:
http://www.edbpriser.dk/Product/Details.aspx?pid=667834
Is that a good choice?

hitachi? eeek!
on your machine, the 7200rpm drive won't make much, if any difference, due to that mac only being SATA I. between the density of the 500gb disk & the bottleneck on the sata bus, the rpm difference isn't a factor...
so don't worry about getting a 7200 drive. if you find one at a good price or something, then that's fine.
I would go with a Western Digital or Seagate. haven't seen good luck with hitachi or toshiba drives in the past. but I've haven't had good luck with WD either & seagate has fallen considerably due to varying firmware issues across the board.
any SATA I or II drive will work, but don't get one with the motion sensor built into the drive (all of them have shock protection of some sort) as these will cause problems with your mac & OS X usually as your mac already has a motion / fall sensor.

Finding the right map to load

Would just like to note that it is very hard to find the right map when all you want is a city. For example, I am hoping that Lyon is in the France map:Center
I would really like a way to locate the ma that is going to give me a city I am going to travel to.
Regards,
Michael

It should be in Rhône-Alps as aspergerguy has mentioned..
Check it out here..
http://maps.ovi.com/#|45.7594|4.82897|3815|0|0
Type ' Lyon, France' in the 'Type any address, business or place name box'.. and hit GO..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Finding the right delimiter

I have developed a cross-platform LabVIEW based application. It will run on Mac OSX, Linux and Windows. It needs to reliably detect the operating system it is running on to use the right delimiters for pathnames (I generate file names / folders based on other front panel input).
I have been using a kludge of sorts to do this. I use a VI server reference and use the OS Name property node, wire it into a search / replace string VI and count the number of times a substring "Windows" is replaced. If the number of replacements is greater than 0, I know it is Windows. Else, I test for Linux. Do the same thing. Then if it is neither Windows nor Linux, I assume it is Mac OSX.
This kludge which worked for the VIs running on Mac OSX and Windows, does not seem to work for the application compiled on Windows LabVIEW PDS (the absence of a gcc style cross-compiler for LabVIEW is a sort of a raw subject for me right now since NI forces developers to pick an OS by creating a needless barrier for cross-platform compilation, but we will not go into that). There are no other points in my code which detect the right delimiter to use (":" for Mac HFS, "/" for Linux filesystems and "\" for Windows FAT32 and NTFS).
I imagine that there are folks here who have tried to something of the sort. Is there a Detect OS and Find the right Delimiter.vi that someone may have and want to share ?
Solved!
Go to Solution.

You can use the Application.TargetOS property to determine what platform you are running on.
You can also use a vi in vi.lib\Utility\libraryn.llb called 'Is Name Multiplatform.vi' to validate your file name.
The Application.TargetOS property is used in this vi if you want an example.
As mentioned, always use Build Path; it will be much safer than concatenating strings...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Where can I find the right LIB_DBSL.SAR??

hi all,
    I want to connect to the other DBMS.The detail is: my BI application server DBMS is oracle, it runs on linux,64 bit,and the target DBMS is MSS 2000.
    The question is where can I find the right LIB_DBSL.SAR,could you give me a link address?
    Thx..

Hi,
You need to log in to service marketplacewith S userID& password. After logging into SMP, we need to find the relevant Database to find the Shared libraries that is LIB_DBSL.SAR file & then need to unarchive in order to load the DB dependent shared libraries.
Regards
Venkat

HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
Mike

Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

Finding the right effect

Similar Messages

Maybe you are looking for