Finding the shared disk using windows-i have bonjour

okay,
i have a home network and my macs can see the disk drive on the extreme base station.
i have bonjour for windows on both my PCs, I can see the printer using bonjour for windows, but I cannot see the hard drive. I can see my Tivo.
I want to have access to this disk. any suggestions.

okay, i found out i had to install the AEBS disk utility from the disk... now it works great.

Similar Messages

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed u

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Can someone walk me through a step by step process to boot camp OS X 10.9.2 to install Windows 7 (I have the physical disk for Windows 7)?

Can someone walk me through a step by step process to boot camp OS X 10.9.2 to install Windows 7 (I have the physical disk for Windows 7)?
I've been reading many forums and watching tutorial videos but still very confused as to what to do...I'm afraid to mess things up.
Thanks!

Mac Basics- Using Windows on your Mac with Boot Camp
Boot Camp 5.1- Frequently asked questions
Boot Camp Help- Overview of Boot Camp setup
10.8 Boot Camp Manual

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.

Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Can't copy large files to AirPort Disk Using Windows 7

Hi Everyone,
I'm positng because I'm unable to copy large files to an AirPort Disk using Windows 7. I have the following setup.
AirPort Extreme:
- Firmware version: 7.6.1
- Airport disks secured by password
- No guest access allowed
- Airport Disk Preferences:
- Automatically discover airport disks is enabled
- Show Airport Disks in the system tray is enabled
External Drive:
- Western Digital 500 GB MyBook External Drive connected to Airport Extreme thru USB
- FAT32 Formated
Computers:
- 2 Toshiba Proteges, Both with 4GB RAM
- Both have Windows 7 Home Premium with Service Pack 1, 64-bit version
- (Sorry we have no MacBooks at home, just iPhones and iPods!)
Airport Utility:
- Version 5.6.1
Airport Disk Preferences Utility:
- Version 1.5.5.3
A week ago, I was able to copy over large files (videos <4GB in size) to the drive. Now, when I try to copy over these large files to the drive, the copy dialog box hangs. I receive a message stating that Windows is calculating the size, but then it doesn't copy over. Windows then gives me a message that it is unable to copy to the drive. When I test the drive connection by copying a small text file over, it copies over quickly and seamlessly. This problem occurs on both computers.
I am able to do the following with the drive connection:
- Read files
- Change file names
- Copy files from the drive to my computer
- See the contents of drive
I've tried all the combinations of the following with no success:
- Turning off Windows Search
- Downgrading the firmware
- Reconfiguring wireless adapter
- Rebooting computer
- Rebooting wireless router
- Rebooting external drive
The drive seems to be working fine except for when I want to copy <2GB files over to the drive. Does anyone have a solution that seems to work?
Thanks!

I'm happy to report that, after reformatting the drive to HFS+ (aka Mac OS Extended), there are no problems writing/copying large or small files to the AirDisk drive. I'm also happy to report that I am copying to the drive at a rate of roughly 4MB/s.
As I mentioned earlier, the only catch is that I am unable to plug the external drive directly into a Windows computer via the USB port as Windows is unable to read HFS+ formatted drives. (I can, however, plug the drive into a Mac computer as they can read HFS+ formatted drives. The only problem is that I don't own any Macs at this time! LOL!)
You're probably wondering how I formatted the external drive to HFS+ since I don't own any Macs. (Windows only allows you to format drives in exFAT, FAT, NTFS and the like.) That is a good question. Basically, I downloaded an open source formatting tool called, Gparted, which allows you to format any USB drive to any major file format system. Since Gparted is an open source tool, it is a little cumbersome to use. Once you figure out how to use it, it is a cinch to format the drive to HFS+. (Of course, an easier method would be to borrow a friend's mac, plug the drive into their mac, and format it to HFS+ using their mac.)
For a step-by-step guide on how to solve this problem, see the steps below:
1) Backup all data from external drive
    a) Fortunately, I have a 1TB ultraportable USB drive which has enough space to backup all data on the drive
2) Format the external drive to HFS+ using one of the methods below
    a) Plug it into a Mac and format it
     b) Use Gparted (free) to format it
3) Plug the drive back into the Airport Extreme
4) Start copying files over to your networked drive!
I hope this helps you! Cheers!

Cannot find the shared library on linux

Hello everyone!
I'm running labviee 2010 on ubuntu 10.10 64bit. Everything works fine except calling shared object files.
As long as I use gcc without any optimization, there is no problem at all, but if I switch on optimization in gcc labview claims being unable to find the shared object file, though I can find an select it in the corresponding dialog window.
Whenever I use the actual intel compiler (composer xe 2011) with, or without optimization, the same problem occurs. As expected ldd doens't show any other dependencies for the optimized and unoptimized case.
can anybody help me please??

Perhaps this KB Entry might be helpfull.
Troubleshooting Shared Library Errors When Launching LabVIEW on Linux
http://digital.ni.com/public.nsf/allkb/7E7ABC9629523E6A862576B3005700E0?OpenDocument
Stefan

HI there, i purchased CS5 Photoshop back in 2010, and had to format my mac. Now i need to download my CS5 again, but cannot find the download files. Where can i find the download of CS5? I have my serial code but cannot find the download.

HI there, i purchased CS5 Photoshop back in 2010, and had to format my mac. Now i need to download my CS5 again, but cannot find the download files. Where can i find the download of CS5? I have my serial code but cannot find the download.Downloading, Installing, Setting Up

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Can't find the hard disk

Hi Everyone, My iMac G5 20" (not iSight) is about 18 months old and I never had any problem with it until a week ago, when it started booting up with white blank screen. I tried to start it up by Tiger, but wouldn't have it, so I went to change the PRAM battery, but broke the clip, now put a new battery and fixed the problem somehow, BUT regardless how often and how hard I tried, the computer can not find the hard disk when it reaches the installation stage. Not by the system DVD or by it's disk utility. I tried the hard disk in my PowerMac, it works fine. I tried another hard disk, just the same. The three lights on the motherboard come on just fine. I have also tried it with the original DVDs (10.3.9) but just the same. Any ideas please? Many thanks

Hi,
Ref: iMac 20" (not iSight) model.
Well, I started it by holding down the option key, like usual it only show the flashing icon the the center of the white screen toggling the small square with question mark, looking for the hard drive.
I boot the iMac by system CD, it takes me through first 5/6 stages and finally does not find any hard drive to install. During this process, when I use the Apple Hardware, it does not find anything.
The hard drive works fine on other machines and other working machine hard drive will not be detected on the iMac.
All three logicboard light come on, showing it works fine, according to Apple manual.
The iMac was working fine, then after started to miss detecting the hard drive a few times during it last two weeks of being used, now it will not detect the hard drive.
Looking from logical point of view, it leads to one of the two cables connecting the hard drive to the logicboarde being faulty, but they have never been touched before as well as look fine.
Would it be caused by backup battery (PRAM)?
Thanks

Firefox can't find the file at /C:/WINDOWS/system32/oobe/icserror/icsdc.htm

I deleted a stack of files and must have accidentally deleted this one. I restored my computer and all the other files came back except this one. I uninstalled firefox and reinstalled and still I get Firefox can't find the file at /C:/WINDOWS/system32/oobe/icserror/icsdc.htm
This version also won't let me use my AVG plug in? Says it's not compatible

hello tanisha625, it looks like some program has overwritten the default new tab page. you can either install the [https://addons.mozilla.org/firefox/addon/searchreset/ searchreset addon] to get rid of the problem or manually reset the page that opens on each new tab.
enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up), search for the preference named '''browser.newtab.url''' and double-click & change its value to '''about:newtab'''.

How to find the listener port on windows?

Hi Friends,
We have a client who is still using Oracle 8.0.6 on NT 4.0
I have a laptop with oracle client 10g.
I want to connect to the NT database to check it.
How do I know what port does the listener used ? what is the command to run at the c:\ command prompt?
I tried> c:\ lsnrctl stat but the command is not recognized
I tried to find the lsnrctl and bin but there is not.
Please help
Thanks a lot

ytterp2009 wrote:
Please help.. and please do NOT post [duplicate posts|http://forums.oracle.com/forums/thread.jspa?threadID=935282&tstart=0]
How to find the listener port on windows?The Internet Protocol stack comes with a number of utilities - one of these, called netstat, is very useful to determine which processes are doing what to which IP ports on that platform. Unfortunately, different flavours are implemented. So the Windows one does not support the parameters and output than the Unix/Linux one.
You can use the following on Windows (run it via a command console) to see what processes are listening on what address and port number:
c:\> netstat -n -a -p tcp
-n = display IP addresses and ports in numeric format
-a = list all ports (including ones used for listening
-p tcp = only display protocol entries for TCP An Oracle listener entry should look something as follows:
Proto Local Address Foreign Address State
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENINGSeeing IP +0.0.0.0+ means that the Listener is accepting connections on all your network interfaces - which is standard. The port number is typically 1521. The foreign address is meaningless for a port in listening state.
PS. Why not simply check the listener.ora configuration file? Because what is actually happening may not be what you thought you configured to happen..

[Forum FAQ] "Unable to connect to the server by using Windows PowerShell Remoting" error while installing RDS roles on Server 2012 R2

When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved.

What are the limits of using windows internal database in RMS?

hi,
We dont have SQL server to use and opting to use windows internal database
What are the limits of using windows internal database in RMS?
tnx

Hi,
the main limitation is that you cannot access a SQL express from remote (even there are tricks to work around that), so you cannot add another machine to the RMS cluster.
Microsoft's recommendation for production systems is to use a full SQL server, what allows you clustering and running all sorts of maintenance tasks.
Other than that SQL Express has a 10GB total limitation for all databases running on that server.
See also http://technet.microsoft.com/en-us/library/dd772673(v=WS.10).aspx for RMS hardware and software requirements.
Hope that helps,
Lutz

How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or

The situation:
I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the missing glyphs or insert two character and use kerning set it up, but it is tedious.
Question:
How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or insert two character and use kerning set it up?
Any one know how to do this?
Thanks in Advance,
~Jack

Try Peter kehrl's script
http://www.kahrel.plus.com/indesign/missing_glyphs.jsx

Finding the shared disk using windows-i have bonjour

Similar Messages

Maybe you are looking for