Finding the version associated with a savepoint
Hello
I need to age off old savepoints but before I do so, I want to check to see which rows have been deleted from the version enabled table at that given save point. Is it the right thing to do to look at the LT table joined to wmsys.wm$workspacesavepoints_table on the version number? The main reason being that I will potentially be getting rid of PKs that may have child rows that don't have a FK constraint and I need to do a cleanup before removing the savepoint.
David
Hi David,
One way of doing this is to use the DIFF view. You can execute dbmswm.setDiffVersions and specify the savepoint that you are interested in, along with its immediate predecessor. This will give you a list of changes that occurred in this version. The all_workspace_savepoints view can be used to determine the savepoint order for a given workspace.
The method that you described should work in this case, but we recommend not viewing the _LT table directly. The Workspace Manager metadata that is contained in these rows is not guaranteed to be consistent between releases.
Regards,
Ben
Similar Messages
-
How do I find the phone # associated with my dryloop account?
Customer service said they would be open til midnight but they're closed at 11:20. How do I find the phone # associated with my dryloop account so that I can pay online.
Hi, yogaonmain!
I'm sorry we were not available to get that information to you. Your mobile telephone number will be listed on your paper statement. It is also typically listed inside your phone under the Settings/Phone info section.
If you need this information immediately, please call our customer service line at 800-922-0204.
Thank you,
AdamE_VZW
Follow us on Twitter @VZWSupport -
Finding the View associated with an Element
Hi,
Is there any way to find the javax.swing.text.View associated with an Element without iterating over every view and seeing if ( view.getElement() == element )?
Thanks,
ChrisDon't know if this will help but you can use:
TextUI ui = textComponent.getUI();
View root = ui.getRootView( textComponent );
View child = root.getView(???);
So if you are iterating through each Element then I am guessing that child index of your Element would be the same index for the View. -
How to find the Infoset associated with a table
Which table in SAP R/3 4.6c stores the table used in Infoset.
Eg: would like to see table : MSEG used in which Infoset.
I would like to know the Joins used in Infoset
Table : AQGSCAT give only the Main table used in the Infoset.
But, I would like to know where and all MSEG is usedHi,
1. BW infoset is a join between two ODS, so, there is no table.
2. BW infoset is not the same than R/3 infoset. You won't find it in SQ02
go throgh the below the link,
http://help.sap.com/saphelp_bw33/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Hareesh -
How do I find the .eex associated with Receivables
I want to add the receivables seeded business group to a user but do not know which .eex we need to add the account has access to the seeded folders for HR, GL and AP. I see that I can add a new business group for AR which will have access to the receivable tables but I do not see the "seeded" data. when I run the following query select object_name, created, tt.* from user_objects tt
where object_type = 'VIEW' and
--status = 'INVALID' and
( object_name like '%FV_%' or object_name like '%FG_%' or
object_name like '%BV_%' or object_name like '%BG_%' )
and object_name like 'AR%'
I see 182 objects returned which I believe are the seeded folders for AR, but If I attempt to create a new business group in teh administation tool I do not see the views returned by the query. Space is limited where I am working so I do not want the DBA's to add all the seeded folders only the ones required for the modules installed.
Kind Regards,Hi,
When you make changes and additions to an Apps mode EUL you must login to Disco Administrator as a apps user e.g SYSADMIN. When the EUL was set up all the seeded .eex files should have been loaded into the EUL and then the administrator grants security on the various Business Areas to the responsibilities that need access to each Business Area.
Additional folders can be added to the EUL by added a folder from the database, but the user must be connected as an Apps user to see the tables and views. There is also a useful document the LearnDiscoverer blog to help set up an apps mode EUL.
Rod West -
Need to know how to find out the Variant associated with a background job
Hello,
Plz help me in finding out how to find the variant associated with a background job. I need to know which variant does the program picks up when it runs the scheduled background job. There are so many variants that exist. How do I figure out which one is being picked up by the program. When I go and see into the job that are already finished it shows the parameter as "&00000000645354" which I do not understand what it corresponds to. I was expecting a variant name instead of this number in the parameter field. Is there a way I can find out the name of teh variant the program is using automatically in the background job ??
Thanks in anticipationYes it is possible which is variant, input fields are choosen
- go to SM37 and locate the background job which was processed using proper selection criteria
- select the Job and click on 'Step' button availabe in the screen
- the new screen is 'step list overview'. now, place the cursor on selected variant avaialble on the screen, then from Menu >> Goto>> variant
which gives the list of input values.
hope this helps
Thanks
JK -
How to know the forms associated with a specific transaction
Hi..
Can anyone please suggest me how to know the forms associated with a specific transaction.
For Example In Finance module.
I came to know from SDN the form associated with F.64 as F140_acc_stat_01.
But i need the steps how to track the form name.
Regards..
VinodhHi,
1.We cann't find the forms associated with a specific transaction.
2.But,based on requirement we can go for the form selection.
3.Suppose in account payable and receivable , we have different forms like customer statement, Dunning and Chek form etc.
4.The functional people can find the form name in SPRO and give the details of the requirement.
5.If u have the output type or formname u can go for the TNAPR and TTXFP tables and u can search for the respect object.
6.For FI u can directly find in the SPRO, by searching it with the form name.
Regards,
If helpful reward with points(Don't forget). -
How to find out all the tables associated with particular T-code or Program
Hi All,
In 4.6B we have a transaction code SE49, where we can see all the tables associated with particular Transaction code or Program.
But in ECC 5.0 or in ECC 6.0 this transaction code is not available.So is there any alternative where i can find out all the tables associated with particular T-code or Program.
Thanks
ShubhamHi,
you are right, Transaction SE49 as well as SE48 do not exist anymore I'm afraid, they
are discontinued.
You might try to create a transaction variant:
1) Start SE93 to create a transaction variant
2) Specify a name, eg. ZSE49, and choose the first option:
"program and screen (dialog transaction)
3) Here specify SAPMSEUZ as program, and 200 as screen number
4) Choose a suitable development class (package) if you want it to be
transportable or Local (=$TMP) if non-transportable
5) press Save
Same applies for SE48, same program but dynpro 100.
Sorry for not being able the reasons behind the decision to discontinue
these transactions. I suppose at least part of the functionality was
integrated in SE38.
Best regards
Erika -
I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?
I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?
-
Could not find a Handler associated with the following type
i keep randomly getting this error in some of my managed devices.
Could not find a Handler associated with the following type: printer policy.
Does anyone have any clue about this?
Thanks in advance.
Here are the log messages:
[DEBUG] [01/10/2012 11:27:46.218] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Begining to register policy handlers.] [] []
[DEBUG] [01/10/2012 11:27:46.437] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering handlers for Policy Handler Registration Module] [] []
[DEBUG] [01/10/2012 11:27:46.437] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Configuration file C:\Program Files\Novell\ZENworks\conf\PolicyHandlersRegistrat ion.xml] [] []
[DEBUG] [01/10/2012 11:27:47.062] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Deserialized 5 handlers] [] []
[DEBUG] [01/10/2012 11:27:47.062] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Got 5 valid handlers to register.] [] []
[DEBUG] [01/10/2012 11:27:47.078] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\launcherconfig. dll] [] []
[DEBUG] [01/10/2012 11:27:47.171] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering launcher configuration policy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.171] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for launcher configuration policy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.171] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\WindowsGroupPol icyPlural.dll] [] []
[DEBUG] [01/10/2012 11:27:47.296] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering grouppolicy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.296] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for grouppolicy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.296] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\Printerenf.dll] [] []
[DEBUG] [01/10/2012 11:27:47.390] [1736] [ZenworksWindowsService] [5] [] [printer policy] [] [Creating wrapper] [] []
[DEBUG] [01/10/2012 11:27:47.500] [1736] [ZenworksWindowsService] [5] [] [printer policy] [] [Exception while creating Providers
Exception Details: The type initializer for 'Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenw orksPrinterProviderPINVOKE' threw an exception.
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenwo rksPrinterProviderPINVOKE.new_PrinterProvider()
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Print erProviderWrapper.GetProvider(ILoggerWrapper logger)] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [printer policy] [] [Exception in Handler constructor
Exception Details: The type initializer for 'Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenw orksPrinterProviderPINVOKE' threw an exception.
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Print erProviderWrapper.GetProvider(ILoggerWrapper logger)
at Novell.Zenworks.PolicyHandlers.PrinterPolicy.Print erPolicyHandler..ctor()] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Exception occurred while registering handler printer policy. Exception details: Exception has been thrown by the target of an invocation.] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Inner Exception details: The type initializer for 'Novell.Zenworks.PolicyHandlers.PrinterPolicy.Zenw orksPrinterProviderPINVOKE' threw an exception.] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for printer policy returning False] [] []
[DEBUG] [01/10/2012 11:27:47.515] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\browserbookmark senf.dll] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [browserbookmarkspolicy] [] [Entered the constructor] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering browserbookmarkspolicy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for browserbookmarkspolicy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.531] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Loading handler assembly: C:\Program Files\Novell\ZENworks\bin\handlers\dluenf.dll] [] []
[DEBUG] [01/10/2012 11:27:47.671] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Registering dlu policy with ActionManager.] [] []
[DEBUG] [01/10/2012 11:27:47.671] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [register handler for dlu policy returning True] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [MessageLogger] [] [Unable to write to event log (Application) using source (Novell.Zenworks.Logger) Exception: System.ComponentModel.Win32Exception: The event log file is full
at System.Diagnostics.EventLog.InternalWriteEvent(UIn t32 eventID, UInt16 category, EventLogEntryType type, String() strings, Byte() rawData, String currentMachineName)
at System.Diagnostics.EventLog.WriteEntry(String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte() rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID, Int16 category, Byte() rawData)
at System.Diagnostics.EventLog.WriteEntry(String source, String message, EventLogEntryType type, Int32 eventID)
at log4net.Appender.EventLogAppender.Append(LoggingEv ent loggingEvent)] [] []
[ERROR] [01/10/2012 11:27:47.671] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [EXTENSIONUTILS.RegistrationModule.FailedRegistrati onMessage] [The following modules could not be registered: printer policy. The configurations of these types would not be applied on this device.] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [Policy Handler Registration Module] [] [Completed registration of policy handlers.] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Start() for module com.novell.zenworks.module.policyhandlerregistrati onmodule returned successfully] [] []
[DEBUG] [01/10/2012 11:27:47.984] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Before calling Initialize() for module com.novell.zenworks.module.remotemanagement at path C:\Program Files\Novell\ZENworks\bin\modules\Novell.Zenworks. RMModule.dll] [] []
[DEBUG] [01/10/2012 11:27:48.046] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Initialize() for module com.novell.zenworks.module.remotemanagement returned successfully] [] []
[DEBUG] [01/10/2012 11:27:48.046] [1736] [ZenworksWindowsService] [5] [] [ModuleLoader] [] [Before calling Start() for module com.novell.zenworks.module.remotemanagement at path C:\Program Files\Novell\ZENworks\bin\modules\Novell.Zenworks. RMModule.dll] [] []
[DEBUG] [01/10/2012 11:27:48.046] [1736] [ZenworksWindowsService] [5] [] [Remote Management Module] [] [(RMMODULE_DEBUG)Initialized(RMMODULE_DEBUG)] [] []
[DEBUG] [01/10/2012 11:27:48.078] [1736] [ZenworksWindowsService] [5] [] [Remote Management Module] [] [(RMMODULE_DEBUG) Adding Property Pages (RMMODULE_DEBUG)] [] []
[DEBUG] [01/10/2012 11:27:48.078] [1736] [ZenworksWindowsService] [5] [] [PolicyManager] [] [Entered PolicyManager.RegisterComponent] [] []
[DEBUG] [01/10/2012 11:27:48.078] [1736] [ZenworksWindowsService] [5] [] [PolicyManager] [] [Registered the component remotemgmt] [] []
[DEBUG] [01/10/2012 11:27:48.109] [1736] [ZenworksWindowsService] [5] [] [Remote Management Module] [] [(RMMODULE_DEBUG)Trying to START service in Start Method (RMMODULE_DEBUG)] [] []matos02,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
I need to shut off Find My iPhone to restore it. The email associated with find my iphone is no longer in use and I cancelled that apple is. How do I change the Apple ID to my new one? My new one is already working everywhere else on my phone and iTune
Are you trying to change the Apple ID associated with your iCloud account? If so, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll. -
Refresh the object associated with a Row in a Data Control?
I am using EclipseLink & have an issue with multiple updates of the same Row. During an update, a new instance of the entity is returned by the update method. The instance bound to the Row is not updated with this new version and subsequent updates fail with an optimistic locking exception since the entityVersion hasn't been updated.
Question: Is it possible to refresh the instance associated with a data control Row? I can remove rows, create rows, but it is not apparent to me how to update a row. I am trying to avoid doing a full retrieve on the bound iterator.Hi!
The issue here is, by my opinion, a gap between ADFm and EJB 3.0 in use-cases with large data sets. If you search this forum, you may find related thread by Pedja about problem of feasible "scrollable" af:table with large number of entities in EJB finder result list. Unfortunately, the ADFm "paged" fetching is in mismatch with EJB support for "paged" (or scrollable) results lists. The all results of EJB finder method are retrieved from data source, stored in memory (thus breaking the heap) and transferred to ADF datacontrol. Then, and only then, ADFm paged fetching and caching mechanisms are employed – but they are just cosmetics as the main data set is permanently stored in memory as List<?>. The workaround is, as Pedja discovered, to write completely proprietary TableCollectionModel which completely evades ADFm and is implemented by set of EJB Session methods for paged acces to datasource through TopLink and native database queries (enabling retrieval of particular range of rows instead a complete result set). Of course, this is very complex coding experience and I find it a not acceptable for efficient development of modern applications on ADF + EJB stack, especially as it brakes a technology independence promoted by EJB and EclipseLink and other standards-based technologies (as you have to use database-specific native query implementation for paged /scrollable access!).
What I want to say is that I have feeling that ADF support for EJB is not complete in full extend and that ADFm is still much better suited for BCs then for EJBs. I hope that this will be solved in future as this issue may pose a significant issue on application development in enterprise-level area where it is supposed that we are dealing with BROWSING also a large data sets.
Yes, I emphasize a BROWSING as I strongly oppose a dogmatic approach that SEARCHING is a solution for every use-case. From theory of information, the system SHOULD NOT limit the user in accessing ALL information (based on access rights, of course). So the idea that SEARCH forms should be used to bridge a architectural gap between a ADFm and EJB is not acceptable, as the search MAY limit the user in acquiring the information he (or she) is not able to describe in adequate manner based on search criteria offered by the developer. So, the developer may be responsible for misinformation of user, by limiting his access to information, jus for technology limitations of ADFm which forces a development of purely SEARCH-based functionalities.
I hope that development team would appreciate and consider this remarks, and invest effort in closing (not bridging!) the gap between ADFm and EJB.
Regards,
PaKo -
I can't verify my icloud account because the email associated with it got deleted in a messup by the email provider. I made a new ID with another email address, but I don't seem to know how to set it as my iCloud account. Apple insist on asking me a password for my old account, I enter it, but it says it is incorrect. I have tried to fix it, and apple knows it is there as it appear on the list of apple ID's, but doesn't recognice the password and when I try to reset the password it gets me to my new account, which needs no resetting.
All I want is to get rid of that old account and replace it with my new one in order to use the cloud, but it seems I am stuck with a non funtioning user ID. I have tried everything there is on this pages, but nothing works.
Please, tell me, step by step, how can I remove the old user ID from the icloud account for good and replace it with my new ID on all my devices.
Thank you.Welcome to the Apple community Yao.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any helpPlease check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Can't log in message "what is the username associated with this smartphone​"
When I attempt to login to app world, I enter my email address and pw, and the it gives me a popup for - "what is the username associated with this smartphone". How do I find out what to enter here? (I don't remember what I may have used in the past).
Also, how can I be sure that I am using the right email address to login? I've tried my other emails and I get stopped before this screen since it doesn't recognize the email.
THanks for your helpHow can you do a security wipe if you cannot get past the blue BlackBerry ID login page?
Maybe you are looking for
-
How do I add shadow to a title, such as, NEW YEAR'S NEEDS, while in Pages? I also don't know how to set a new folder for documents of the same type such as, "Sermons," or "Lessons." Any help will be greatly appreciated. Donnie
-
Hi, does anybody have any good ideas for a Java based Thesis project, something that could be completed in no more than 6 months. I have been working with Servlets & J2ME for over a year, but I'm having trouble coming up with a good/challenging proje
-
A problem with callSerially()
Hi, guys, I modifed a sample sweeper anmimation MIDlet from Chapter 13 of the book <<Beginning J2ME From Novice to Professional>>. The original sweeper used a separate animaton thread along with the UI thread. I managed somehow to modify the code to
-
Ejb connect to remote jndi resource
Hi, I want my ejb to connect to a jndi reource (in this case a jms topic) on another server (also AS7). I'm trying to use somthing like this: Hashtable env = new Hashtable(); env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.cosnaming.CNCtxFacto
-
MacBook Pro and Office Trial.
The 28 day trial on my NEW MacBook Pro expired yesterday. On boot this morning, the whole suite has gone, along with most of my files, all of my music and programs I've paid good money for. Every program installed that didnt go are back to day 1 defa