Finding the worksets added to roles

hi,
can any one tell me, how we can get all the worksets assigned to the a particualr role by using java.
Message was edited by: Balamuruganand selvaraj

Hi,
This is not the right forum, post it in EP or Java programming forum.
if i understand ur post do you intended to assign worksets to a role only using java but not using Portal, if you can elobarate what exactly your requirement someone can answer you.
Regards,
RK

Similar Messages

How can I find the latest added contacts?

Hi,
I'm syncing my Address Book with my Nokia 6233, and it works fine. However, the 6233 has limited contacts memory (500 entries), so I had to create a special group within Address Book which is the one synced to the phone.
Problem is, whenever I add a new entry IN the phone, and later sync, the entry in question is put in the "All" group, not in the "6233" that I created. If I don't pay attention and remember which entries I put in the phone, and move them to the "6233" group, they are deleted from the phone during the next sync (because they don't belong to the "6233" group, of course).
My question is: how can I get the list of the latest added entries after a sync? I tried to do a smart group based on the modification/update date (which every entry has), but I can't: Smart Group don't offer a "last modified on" criteria, as iTunes does, for instance.
Using Spotlight to look for the string "Updated: [date]" (which shows at the bottom right of each entry) did not work either, probably because the data is wrapped by XML code that makes it understable only for Address Book.
Thanks for any suggestion,
bat

Besides getting a phone with more memory, and besides sending thank you notes ("It's been nice knowing you, goodbye forever!"), I can only think of specifying a field to mark the entry on your phone.
For example, perhaps putting 6223 in the notes. If your phone has a notes field, then that should work. Then the Smart Group in Address Book could search for 6223 in the Notes field.
As for your Spotlight search of "Update: [date]", I believe that didn't work because what you see in Address Book is just the interface, just some text for your convenience that isn't necessarily stored. In other words, the "Update: " part is just decoration. Nice try, though.
What I found works when searching for contacts based on modification date outside of Address Book is to use Finder's Find (in the File menu), or Command-F. For the first criteria, you can choose "Kind" and then "Other…" and then "Address Book Person Data". The next criteria can be "Last Modified" to narrow the results down to those which have been modified since a certain date, such as by syncing. I'm not sure how useful that will be for this scenario, though. The contacts will be listed by people's names, at first. Unfortunately, the names will end up becoming the undistinguishable file names being referenced for the search as as you scroll.

Find the userprofile added from yesterday

Hi,
I would like to get the userprofile which was created day before.Is there any way without looping through all the profiles.
I have checked UserProfileChangeQuery, but it says will reteirve the profile that was modified and not added.
Please let me know if any solution is avaible.
Thanks,
Sudan

i dont think their is easy way...what we implement to cleanup inactive users(AD) from UPA( because we have not enable the mysite cleanup due to legal issues).we wrote a custom sript, its read from USer from AD and Same thing from UPA and then compare
it. after identifying the Inactive user, it then search for mysite for those users and generate the report.it took 2 hours to complete one iteration( almost 300k users).
In your case( i am assuming you have MySite cleanup job), i think you have to write a logic.
1st get the all user from User profile, then check for each user and create list of who dont have mysite.at then end create mysites for all the user who dont have Mysites.
i know its not easy.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Could not find the log in SCUL for changes made into user.

Hi,
We assigned role to user in prob system in CUA .
I cannot find who has made those changes into that user.
I have looked in SCUL but could not find it. I did not find any changes in SUIM.
Can anybody help me hjow can i find who has added that role.
Thanks Rajesh
Edited by: Rajesh Nanda on Apr 1, 2009 12:10 AM

Hi Rajesh,
this is the normal behaviour. The user gets changed in the CUA-child system by the user who is used in the RFC-connection form CUA master to cua child. Only in the case you use a trusted/trusting RFC connection, the user who performs the changes in the central system connects also to the child systems. Only in that case you will find the 'real' user as changer in the child system change docs.
With SAP note # 1079207 new change documents are delivered for the CUA-case. To evaluate that changedocs you can use the new report rsusr100n (Ithink ,that it is still not integrated in SUIM until now, so you have to start it in se38,...)
b.rgds,
Bernhard

How do I find the new colors in Pantone Formula guide in InDesign CC?

It seems like the Pantone library in InDesign is not updated. I can't find the newly added colors from the Formula guide I just bought. (pantone solid coated/uncoated)
For examle color 2248. Where do I find the new colors and how do I add them to my colorpanel?
I hope there is someone who can help me with this!

Check this discussion it may help
http://forums.adobe.com/message/5737194#5737194

How to find the user belongs to ?

Hi all,
i want to find the user in which role he belongs to ? in which view we can find these information?
pls help me
Thanks
Regards,
M.Murali...

Hi,
check user_role_privs or dba_role_privs
- Pavan Kumar N

Where is the "Recently Added" section? And how do I transfer music to my iPhone now?

I just downloaded the newest version of iTunes, and what do you know, I hate it. I literally can't find ANYTHING that I need, and just end up getting ******. Can someone help me find the "Recently Added" in the new version of iTunes, and show me how to transfer music to my iPhone again?

You can restore much of the look & feel of the previous version with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different colours for each album use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc. .
Displaying the sidebar should make it easier to find what you are looking for.
Should you feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

How to remove page in the workset

Hi all,
Currently, I have removed an old page from the workset which has a Delta track to the workset to a Role in the Content Administration tab.
However, the role still able to view the old page.
How to remove unwanted page in the workset which is allocated to a role properly?
Can advise?
Thank you.

Hi,
Just open the workset from the portal catalogue.
Select the particular workset.
As soon as u select it the delete button will be enabled.Just delete it.
Refresh the portal or logoff and login again
Regards,
Tamil K

Adding/Deleting T codes to roles. Finding the correct roles to add/delete T

Hi Folks
I would like solutions to 3 questions.
1) How do you Add/Delete transaction codes to roles (ECC6)
2) How do you find the correct roles to Add/Delete these T codes
3) Has anyone any documentation and or screenshots on Versa, the Compliance Calibrator.
We are using single roles within composite roles.
Useful answers will be rewarded.
Thank you very much
Mark W

Hi Mark,
Typically the functional team or organisational design team will specify the roles required and the transaction assignment to those roles. By working with them, you can understand what part of the business processes the roles represent and get an idea about which transactions go in what roles. They will also be able to advise if a new role is required id a transaction is missing.
The allocation of tx to roles should only be approved by role owners or appropriate responsible resource, and they should stipulate exactly which roles those tcodes go into. If you have not been involved in the role design then it is not appropriate for them to expect you to make those kind of decisions.
All of the recent compliance calibrator docs are on the service marketplace, I'm sure that the basis team on your current project will either give you their OSS ID to let you download them, or alternatively will download the docs for you if they have concerns about sharing the ID. From memory, if you have security certification, you should be able to get an individual OSS ID from SAP.
There is some high level info available from www.sap.com/grc and a brief overview of an install of CC5.1 here: http://www.*********************/sox_sod/sox_sod.htm
Hope that helps
Cheers
Alex

Find the iViews, Pages and Folders assigned to Role

Hi,
Does any one has the idea about how to retrieve the worksets, pages and iviews assigned to a role.
I found a piece of code that will retrieve the roles, worksets, pages and iviews from PCD.
Here is the code, that is to retrieve the roles, worksets, pages and iviews from PCD
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
env.put(Context.SECURITY_PRINCIPAL, WDClientUser.getCurrentUser().getSAPUser());
env.put(com.sap.portal.directory.Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_ADMINISTRATION);
InitialContext initialContext = null;
DirContext dirCtx;
initialContext = new InitialContext(env);
dirCtx = (DirContext) initialContext.lookup("pcd:portal_content/");
PcdSearchControls pcdSearchControls = new PcdSearchControls();
pcdSearchControls.setReturningObjFlag(false);
pcdSearchControls.setSearchScope(PcdSearchControls.SUBTREE_WITH_UNIT_ROOTS_SCOPE);
dirCtx.addToEnvironment(Constants.APPLY_ASPECT_TO_CONTEXTS,Constants.APPLY_ASPECT_TO_CONTEXTS);
// Gets the full path of the iViews from the PCD
NamingEnumeration ne =      dirCtx.search("","(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.iview)",     pcdSearchControls);
while (ne.hasMoreElements())
     IPcdSearchResult searchResult = (IPcdSearchResult) ne.nextElement();
     String location = "pcd:portal_content/" + searchResult.getName();
     wdComponentAPI.getMessageManager().reportSuccess("View ="+location);
// Gets the full path of the pages from the PCD
NamingEnumeration nePage = dirCtx.search("","(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.page)",pcdSearchControls);
while (nePage.hasMoreElements())
     IPcdSearchResult searchResult = (IPcdSearchResult) nePage.nextElement();
     String location = "pcd:portal_content/" + searchResult.getName();
     wdComponentAPI.getMessageManager().reportSuccess("Page ="+location);
// Gets the full path of the worksets from the PCD
NamingEnumeration neWorkSet = dirCtx.search("","(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.workset)",pcdSearchControls);
while (neWorkSet.hasMoreElements())
     IPcdSearchResult searchResult = (IPcdSearchResult) neWorkSet.nextElement();
     String location = "pcd:portal_content/" + searchResult.getName();
     wdComponentAPI.getMessageManager().reportSuccess("WorkSet ="+location);
But my requirements is, if I have the role as "Sales Role", I want to find the iViews, Pages and worksets assinged to this role.
Your help is really appreciated.
Thanks in Advance,
Chinna.

Hi,
All you need to do is to change the search root object:
DirContext dirCtx;
initialContext = new InitialContext(env);
dirCtx = (DirContext) initialContext.lookup("pcd:portal_content/mypath/myrole");
PcdSearchControls pcdSearchControls = new PcdSearchControls();
pcdSearchControls.setReturningObjFlag(false);
pcdSearchControls.setSearchScope(PcdSearchControls.SUBTREE_WITH_UNIT_ROOTS_SCOPE);
dirCtx.addToEnvironment(Constants.APPLY_ASPECT_TO_CONTEXTS,Constants.APPLY_ASPECT_TO_CONTEXTS);
all the rest stays the same.
BTW - you can also retrieve all the objects using one search by putting
(|(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.iview),(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.page),(com.sap.portal.pcd.gl.ObjectClass=com.sapportals.portal.workset))
In the search query. Then you can get the type using PCM (portal content model) APIs.
Hope this helps, Elisha

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can modify the pref keyword.URL on the about:config page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

Text in VA02 - how to find the user who added the text

Hi
The user is adding text in the sales order through VA02, sometime after creating the order. This is not making any changes to the existing data, but adding the text in Header Text.
When trying to findout who made the addition of text (not changes) from VA03 - menu - environment - changes ---it is not showing any details regarding this. Please guide me how to find out the user who made the addition of text in sales order through VA02.
Thanks,
Ravi

Hi Ravi,
          I think there is no option available to find the name of the person who added text to the sales order.
         If the person who creates sales order, should also maintains the text we can find the name who created sales order. I am sure that u might be knowing the way.
       Still for the benefit of friends who r not aware, in the sales order> GOTO>Header data--> Sales tab.
Regards,
Ravi Duggirala.

Why can't I search/find text I added in a PDF with the TouchUp Text tool in Adobe Acrobat Pro 9/X?

If I use the TouchUp Text tool in Adobe Acrobat Pro 9/X to modify a text, the program can't find the added/changed text. But when I just delete letters/words in the text, the rest/changed words can be found. Is that a known problem? Is there any fix or workaround?

Fantastic. There is all sorts of nonsense out there on how to fix this problem, but your simple suggestion works perfectly. Thanks!

Safari 5.1 in iMac OS X 10.6.8.Adding Bookmarks to "unsorted Bookmarks" folder puts them in a black hole. I can't find the "UB" folder. Where is it? Should I add it to the folder list somewhere on the left pane? OR? Help, please!

Safari 5.1 in iMac OS X 10.6.8.Adding Bookmarks to "unsorted Bookmarks" folder puts them in a black hole. I can't find the "UB" folder. Where is it? Should I add it to the folder list somewhere on the left pane? OR? Help, please!

It looks like that the installation process of one of the applications have caused some trouble. One of them may have changed or added kext files.
For that, the Window server crashed if you try to open a non Apple application like Firefox
Start the system in safe mode by holding the shift key on power on.
If save mode is reached, perform a permissions repair with the Disk Utility.
Don't bother about upcoming warnings like "could not repair file xy" as that occur cause you use the tool on a running system and opened files can not get touched by the tool.
After repair is done reboot system to normal and try to open Firefox.
If the problem persits, please report back here.
Lupunus

In which table we can find the relationship between Role id and Task id

Hi Experts,
In which table we can find the relationship between Role id and Task id in Cprojects.
Thanks
Subhaskar

Hi Subhaskar,
Apart from DPR_ENTITY_LINK , you can also get it from table DPR_PART.
Please go through the below link
http://wiki.sdn.sap.com/wiki/display/PLM/cProjectstablesin+SAP
I hope this will help you.
Regards,
Rahul

Finding the worksets added to roles

Similar Messages

Maybe you are looking for