Finding this forum here on the Bea Portal is quite hard...

Finding this forum here on the Bea Portal is quite hard...
For example, here
http://dev2dev.bea.com/workshop/
there should be a link to the Workshop forum... (this forum, and the M7 old forum).
Thanks for putting some more links!

Thanks for the suggestion. I will forward this to the web team.
br
Marky Goldstein wrote:
Finding this forum here on the Bea Portal is quite hard...
For example, here
http://dev2dev.bea.com/workshop/
there should be a link to the Workshop forum... (this forum, and the M7 old forum).
Thanks for putting some more links!

Similar Messages

Need to find this field UsDefTxt2 in the Transcation code DGP3

Hello,
Very Good Afternoon,
Can anybody let me know where I can find this field UsDefTxt2
in the Transaction code DGP3 also from which table data is extracted into this field.
Any suggestions are Appreciated.
Regards,
Kittu

Hi chandra,
Is there any way that I can confirm that this is the same field.
When we go to Tcode : DGP3 -> Enter the Material Number and press Enter
                                            -> Press Enter and then double click on any Materails listed
                                            -> It will display that particlular Materail in detail.
                                            -> Now click on the Printed Texts Tab
                                            -> Here you can find the UsDefTxt2 field.
Any suggestions would be apprecaiated.....
Regards,
Kittu

TS4148 I have an apple 4 given to me by my cousin from japan but the phone is lock by japan sotfbank, how can i use this phone here in the Philippines network provider? thanks

I have an apple 4 given to me by my cousin from japan but the phone is lock by japan sotfbank, how can i use this phone here in the Philippines network provider? thanks

Only the carrier an iPhone was sold as carrier locked with can officially unlock the iPhone. It is my understanding that Softbank in Japan does not unlock iPhones.

HT3680 where can i find this program after reading the whole story?

where can i find this program after reading the whole story?

could this knowledge base article be what your looking for?:
HT3680

I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything.

I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything. Thanks for the info. on changing it.

Format is found in the Erase Tab:
The Disk Image is found on the Restore Tab:

Where to find MySQL / ClearDB database in the Full Portal?

I have created a MySQL database, backed by ClearDB, in the Azure Preview portal (portal.azure.com) but I cannot see it anywhere in the full portal (manage.windowsazure.com). Where is it? Thanks.

Hi Borek,
Thanks for posting here.
On the Azure management portal (https://www.manage.windowsazure.com) you will see the MySQL/ClearDB located on
Add-ons services on the left pane.
On the preview portal (portal.azure.com), you will find it under Active on the left pane. This will provide complete details on all the services which are created and its status.
Ref:
http://azure.microsoft.com/en-us/documentation/articles/store-php-create-mysql-database/
Hope this helps you.
Girish Prajwal

Is this forum related to the Sony Mobile company?

Hello all,
I would like to know if the team answering the questions here is related to thr company Sony Mobile?
I have spent nearly 8 months with 1 phone of my small company's 8 devices (all Sony Xperia phones or tablets)
I have written several emails to Sony and I am not willing to give up so Sony will get away with its horrible support.
Is there a way to contact / be contacted from a senior escalation specialist or do I have to continue sending emails and letters to Sony support via the "contact us" form without getting an answer?
Or perhaps other consumer forums would be a place to share the great experience of Sonyy support?
I'd love to get an answer from somebody from this site, if possible.
Thanx a lot
Michael

Hi !
I'm sorry to hear that you have such an experience with our customer support.
We are several official Sony members here on the support forum that represents the company.
Please let me or any of my colleagues know if there something we can do for you.
http://talk.sonymobile.com/t5/Welcome/Community-users/m-p/634967#U634967

Just a reminder - this forum is for the 3S connectors.

This forum is for questions and/or issues with the 3S connectors (SugarCRM connector, SharePoint Connector and Salesforce Connector). Mobility Pack questions should be posted in the DS-Mobility-Pack forum. The Mobility Pack forum can be found here:
DS: Mobility Pack

Hi
I am working for active noise control inside a duct, I am using real time application with sampling rate 10 000, max. frequency 1500 Hz and 2 outputs.
I had a DAQ card 6221 M series is this sufficient for this application or I might use another.
Thanks
Waleed

Any intelligent people from HP on this forum ? Why the Disney app eprint does not work ?

There is a problem with the Disney App on the Photosmart eprint application . After the selection of an image there is only a preview button and no way to print. If you use this button nothing appear except a black screen !!!
First of all stop to make stupid answer like unsbscribe eprint service uninstall the disney application or verify that your a registered or check that your printer is powered ....IT DOES NOT WORK even all this check is on !!!
And you can also check that all of the users with this bug have try this and no way.... That is the problem with this application ? Do you have any user that can print something from this app. Find a solution or unvalidate this application.
Oh I forgot to teel you that it work perfectly for the dreamwork application.
Regards, Defmak.

The disney app is currently experiencing problems. It is an issue on Disney's end which is why you can print from other applications. Unfortunately I'm not sure when Disney will have the issue taken care of but what I would suggest is to try later.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Loads of NIKE+ info on 1st gen Nano forum (here's the link)

If you are new to the Nike+ sport kit and looking for information, the 1st generation Nano Nike+ Sport Kit forum has loads of information that will be very relevant to your Nano & the Nike+
Go this link: http://discussions.apple.com/forum.jspa?forumID=1123&start=0

I just took another look at this and figured out what i was doing wrong.
In the event someone else is acting as dumb as me:
- To get the Nike+iPod > Settings > Remote menu to appear on your iPod Nano. You need to be pressing Play / Pause on the Remote device, while the Nano is on the Nike+iPod > Settings menu. The Remote menu then auto-magically appears.
- Pressing Play / Pause on the Nano is not the thing to be doing to make the remote menu appear.
Yeah i feel dumb.
But in my defence the manual doesnt specify the Play / Pause button to be pushing; the one on the Nano or the Remote.
Happy running!

HT4865 hey how do i unlock my iphone it says iphone disabled connect ot itunes but were do i find this part at on the site

how to find the unlock part on this website

If your phone is disabled because you entered the wrong passcode too many times, you will have to restore it to remove the passcode (http://support.apple.com/kb/ht1414). If you have iOS 7, you will have to force it into recovery mode in order to restore it (see http://support.apple.com/kb/ht1808).

Hard to find this forum!!

Is it just me, or is it hard to know where to go once are already on the support webpage?

liveandlearn wrote:
Is it just me, or is it hard to know where to go once are already on the support webpage?
Unfortunately peer to peer support pages, thats what this is, tend to be better than provider support.

Finding this error when running the below query - Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.

select
min(h.[Spcl Order]),
(select (case when sum(pro.[Quantity]) is null then 0 else sum(pro.[Quantity]) END))
+
(select (case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END),
min(b.[Posting Date]),min(c.[Order No]),min(d.[Prod_Order No]),min(e.[No]),
min(f.[Item Category Code]),min(g.[Location Code]),min(i.[Spcl Order_Purch])
from [tablename2] A
inner join [sample].[dbo].[Posting Date_PRL] as b on a.[Posting Date]=b.[Posting Date]
inner join [sample].[dbo].[Order No_PRL] as c on a.[Order No_]=c.[Order No]
inner join [sample].[dbo].[Prod_ OrderNo_PRL] as d on a.[Prod_ Order No_]=d.[Prod_OrderNo]
inner join [sample].[dbo].[No_PRL] as e on a.[No_]=e.[No]
inner join [sample].[dbo].[Item Category Code_PRL] as f on a.[Item Category Code]=f.[Item Category Code]
inner join [sample].[dbo].[Location Code_PRL] as g on a.[Location Code]=g.[Location Code]
inner join [sample].[dbo].[Spcl Order_PRL] as i on a.[Spcl Order]=i.[Spcl Order_Purch]
where ((A.[Item Category Code] = 'STYLES') and (A.[Prod_ Order No_]='') and ( A.[Buy-from Vendor No_] in ('S02052')) AND (A.[Quantity]>0)
AND ( A.[Posting Date] = pro.[Finished Date])))
from [tablename1] pro
inner join [sample].[dbo].[Spcl Order_PO] as h on Pro.[Spcl Order]=h.[Spcl Order]
where ((pro.[Status]=4) and (pro.[Finished Date] ='2013-10-10' )) group by pro.[Finished Date]

As other suggested, please find the column list...there are many columns in your subquery...
eg:
Select *,(Select 1,2) From (Values(1),(2))A(MonthID) -- will not work
where as
Select *,(Select 1) From (Values(1),(2))A(MonthID) --will work
Your case:
select
min(h.[Spcl Order]),
(select
(case when sum(pro.[Quantity]) is null then 0 else sum(pro.[Quantity]) END))
+
(select (case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END),
min(b.[Posting Date]),min(c.[Order No]),min(d.[Prod_Order No]),min(e.[No]),
min(f.[Item Category Code]),min(g.[Location Code]),min(i.[Spcl Order_Purch])
from [tablename2] A
inner join [sample].[dbo].[Posting Date_PRL] as b on a.[Posting Date]=b.[Posting Date]
inner join [sample].[dbo].[Order No_PRL] as c on a.[Order No_]=c.[Order No]
inner join [sample].[dbo].[Prod_ OrderNo_PRL] as d on a.[Prod_ Order No_]=d.[Prod_OrderNo]
inner join [sample].[dbo].[No_PRL] as e on a.[No_]=e.[No]
inner join [sample].[dbo].[Item Category Code_PRL] as f on a.[Item Category Code]=f.[Item Category Code]
inner join [sample].[dbo].[Location Code_PRL] as g on a.[Location Code]=g.[Location Code]
inner join [sample].[dbo].[Spcl Order_PRL] as i on a.[Spcl Order]=i.[Spcl Order_Purch]
where ((A.[Item Category Code] = 'STYLES') and (A.[Prod_ Order No_]='') and ( A.[Buy-from Vendor No_]
in ('S02052')) AND (A.[Quantity]>0)
AND ( A.[Posting Date] = pro.[Finished Date])))
from [tablename1] pro
inner join [sample].[dbo].[Spcl Order_PO] as h on Pro.[Spcl Order]=h.[Spcl Order]
where ((pro.[Status]=4) and (pro.[Finished Date] ='2013-10-10' )) group by pro.[Finished Date]

When I plug in my phone to sync, The pictures are not being copied to computer. My wife's phone was doing this on her pc, but now it's quit as well.

When I sync my phone to my computer I have it on manually manage music etc...
My phone has never copied the pictures from my iphone to the computer. This is my problem
Any help would be appreciated.
Thanks

Follow the instructions for XP in this article Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer to import your photos from the phone to your computer when you connect your device, using the camera wizard.

Download Camera Raw 8.3 update for my Photoshop CS6-How do I do it? I cannot find this option anywhere on the download sights for Adobe PS. Please help with specific instructions. Thanks

I cannot find anywhere on the Adobe sights the specific page where I can download Photoshop CS6 Camera Raw Update to 8.4 or 8.4 to support Lightroom 5 and my new Sony a7r camera. Please help. I am a tech novice. Thanks.

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Finding this forum here on the Bea Portal is quite hard...

Similar Messages

Maybe you are looking for