Finding TV, DVD, etc. Codes for FiOS TV Remote Controls

Every so often someone posts a question about needing the code for their new TV, DVD player, etc, to program into their FiOS TV remote control. The remotes come with a small booklet that lists a number of codes, but I don't think it has been updated in a while, so codes for newer devices or brands may be missing. Verizon has some lists on the web, but they seem to be difficult to find (at least for me). Here are links to the web pages I have been able to find so far:
TVs: Link
DVDs: Link
Audio Receivers: Link
Audio Amplifiers: Link
If any of you have links to other Verizon web pages, or pages at other sites that provide code lists, I think it might be useful to folks to have them posted in one place.
Some things I wish Verizon would do:
1) Provide links in obvious places to the pages that already exist and are linked above (plus any other pages that might exist).
2) Update the pages on a regular basis. Or if they already do that, then put an update date on the page so we can tell when it was done.
3) Provide a link where people could send Verizon information on new devices they get or codes they discover. I mean a real email address or web page where the information would go directly to the right people instead of a generic email address with a canned response where we never know whether it actually went to someone or just was sent to the bit-bucket.
Any thoughts?
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248

Hi  Adam,
              I've got the same problem you had earlier this year, with the same Matsui tv/dvd combo unit and the Black remote. Did you ever get a successful resolution? If so would you mind sharing the solution with me, thank you?

Similar Messages

  • HEX Codes for the Apple Remote

    Hallo,
    does anyone know the HEX codes for the Apple Remote, so I can connect it with my universal remote control?
    Dominik

    you can train any remote to control the apple tv.
    on the appletv navigate to settings>General>Remotes>learn Remote
    handy little feature

  • I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

    I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
    The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
    RC1762302/00
    3139 228 50021
    HP SPS: 435743-001
    HP: HSTNN-PRO7
    RC6 ir
    CP06 60808 A 146218 REV. B
    I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
    Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far. 
    So, instead of trying the whole bunch, I am crying for help -  could someone please tell me which driver is the correct one for this remote model?
    Thanks in advance and regards,
    Mike  
    P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook 

    http://ftp.hp.com/pub/softpaq/sp46501-47000/sp4674​1.exe
    File name:
    sp46741.exe [1/1, 1.04M]
    System requirements:
    No additional prerequisites
    Released:
    2009-12-31
    Version:
    2.7.4.0 A
    Compatibility:
    Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
    Fix/Enhancement:
    Original Software/Drivers

  • I need to find the Netflix activation code for NS-BRDVD3

    I bought this as an open box today and everything works great, but the Netflix has already been activated with someone else's account.  While it was fun for a while searching through their queue and their recently watched movies (they seem to like raunchy teenage sex comedies), I'd really like to set my account up on there.  Is there anyway to find out what the code is?

    There was not a netflix option under the Networking menu.  The first thing I tried was resetting the system to factory defaults, and it triggered the "try netflix" popup, but it kept the old netflix user's account in there.  Later (after tweeting with someone on twelpforce) I decided to try it one more time.  That time it deleted the old account and gave me the activation code.  So everything is great now.  Thanks for your help.

  • Where Do I find the netflix activation code for my atv2?

    Where do I find or get the activation code for Netflix on my apple tv 2

    I'm having the same problem, in the United States.  Netflix had been working fine on ATV2, and now suddenly it doesn't.  Its keeps saying the Netflix account or password is invalid.  They are not.  Netflix continues to work fine on an iPhone, MacBookPro, and bluray player using the same wifi and isp, also all in the United States.
    I've trying rebooting the ATV2, and vewy vewy carefuwy entering the password.  Netflix account "manage your devices" gives you the option of disconnecting your devices from Netflix, and then reconnecting them--but when you try to reconnect them, you get stuck on this screen that asks for something called an "activation code".  I know, like R.O.U.S.'s, you don't think they exist.  My blu-ray player gave me one in about 5 seconds, and without one from ATV2, working the problem from the Netflix end is a big fat no-go.  The ATV2 end apparently consists of two options: reboot, and re-enter the password.  So, now I have this useless black lump of plastic sitting on my blu-ray player. 

  • How to Find unused programs / T-codes for the past three months

    How to find the unused programs / transaction codes for the past three months,
    I tried with the ST03 Transaction but it gives only the Tcodes, program used in last one monthu2026
    Regards,
    Purshoth

    This depends on the data retention time (in days) maintained in your system. In ST03, on the right hand side, check "Collector" tab, under that "Performance Database" and then "Reorganization" which will give you the details retention times  (in days).
    Also please check the link http://inet.tamko.com:8081/saphelp/helpdata/EN/c4/3a68d5505211d189550000e829fbbd/frameset.htm for more details.
    Thank You.

  • Code for va01 bdc table control

    hi
    i want to CODE FOR  bdc table control  VA01 (TCODE)
    ASAP

    Awadhesh,
    just refer:
    Problem in the BDC Table Control for the T.Code VA01
    BDC Uploading from flat file to VA01.
    BDC For Line Items In Sales Order
    dont forget reward.
    Amit.

  • HT3176 What is the numerical remote code for the apple remote? I would like to program another manufacturers remote to control my iPod dock

    I would like to control my iPod doc with my Denon remote.  Does anyone know he numerical remote code for an apple iPod doc?

    Hi kwg06516,
    This remote(RMT-B126A) doesn't have programmable codes because its not a universal remote. It is exclusive for your player(BDP-S3200) only. It may control other devices such as TVs but with the same brand only.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Individual Script for Keys of Remote Control

    Hello together,
    within my actual project, i need any script which can set an action on the number-keys of the remote control. The user press for example the "0" or the "4", then another Title-Set or anything starts. Unfortunately it have to be the number key and not TITLE MENU or ANGLE Keys.
    I don´t know if it is realizable with DVD Studio Pro.
    Sorry for my bad english.
    Thanks for your answers !
    Greetings
    Alex

    You may check this thread to know even the add-on created by yourself may not have that option:
    Script to install SDK Add-On
    Thanks,
    Gordon

  • Girder plugin for MSI Vox remote control

    Hi!
    Since I bought a VOX USB2.0 for using in my laptop I found the remote control useless cause it only works with the MSIPVS (that I don't use) and there was no plugin for it.
    So, recently I had some free time and I developed a plugin that allows me to control my pc with this little remote control.
    If there's someone else interested in this plugin I can make it available to download.
    Samuel

    Hi!
    I have installed Christv v4.99, Grider and downloaded config files for VOX on Promixis site (thanks Alexis!!!). I can see that remote will work (have tried some of functions and it works) but my problem is:
    Christv doesn't give me good quality picture like Fly 2000 TV. If I try to change some settings in "Program settings" then it is reflecting to CPU usage! My fun on laptop is very loud when it is hot, so it disturbs me too much 
    I am attaching Print screen from my current settings (pic on Christv is black but not on my PC) but if I change advanced settings for Greedy HM it doesn't remember it after shutting down Christv. If anyone have lower CPU usage and good pic quality with Christv it will be very nice if (s)he post it here
    Sorry for my bad english
    http://img126.imageshack.us/img126/2959/screenki7.jpg

  • FIOS mobile remote control feature suddenly stopped working

    The remote control feature in the new FIOS Mobile app was working superbly this morning and now it doesn't recognized either of my STBs. Any solutions?
    Thanks

    Some nokia made remotes have a small battery inside (the one that's supplied with the N95 does) and it may have run out.
    If you don't want to open the remote to check then you should take it to a nokia care point/service centre.
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair.

  • Help finding replacement DVD LightScribe burner for HPE-500Y

    LightScribe internal DVD burner locked up.
    I have been trying to find replacement and still use LightScribe when I transfer VHS to DVD.
    HELP

    More info for all you out there that think that they can get to the bottom of this. The superdrive can read and write CDR's and can read and play DVD's. Just can't burn them! I have used a couple different type of DVD's and what happens using Disc Utility is that the burn process starts, then very quickly goes to "finishing burn". I then get a message that says "Unable to burn (insert title here) the disc isn't writeable"
    I am using DVD-R (and have in the past). I have had great experience with the HP brand that allows for inkjet printing on the surface. However, I have gone to Memorex (same problem), then to a different HP and this is all I get. I have used Tayo-Uden as well. Any ideas?
    Thanks!

  • How do I find my air play code for my Apple TV to connect to my I pad

    I have my Apple TV connected to TV it's working but when I try to mirror my what is in my ipad it is asking for a code how do I get this

    Someone set up an airplay passcode. You can go into the settings to reset it.

  • How do I find my product key code for CS5?

    I bought CS5 2.5 years ago, unfortunately my school email deletes anything older than 6 months. I am looking to find my key codes so that I can transfer my CS5 over to my new laptop, can someone give me advice on this issue?

    Hi David,
    Please refer the knowledge base article: https://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    Regards,
    Romit Sinha

  • What is the STB code for a samsung remote bp59-00124a

    I want to program my TV remote to control my verizon STB but I cannot find the code to put into my Samsung remote bp59-00124a  if any one knows this it would be extremely helpful I have tried 000-049 and 060-071 with no success

    http://ars.samsung.com/customer/DownloadAnsTempl?AT_ID=5716&SEQ_NO=2
    http://ars.samsung.com/customer/DownloadAnsTempl?AT_ID=5716&SEQ_NO=3
    Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

Maybe you are looking for

  • IPhone update problems!

    As alot of people, I have encountered the problem of NOT being able to sync my phone with my G5 ever since the latest iPhone & iTunes updates. The phone lights up and indicates it is plugged in, but it will only appear in iPhoto, and not iTunes. The

  • Adding UI elements in a abstract portal component??

    Hi, I want to create an abstract portal component in PDK with a textarea and a submit button..On clicking the submit button I want to store the textarea content in a file..So can anyone provide me the solution to this soon?? Regards, Udit

  • Hello all...I have version 10.5.8... How do i DL a Free version of Office???

    Hello all...I have version 10.5.8 which is old I know... How do i DL a Free version of Office???

  • What do I need to do to take full advantage of a 802.11ac Airport?

    Do I need to purchase any separate cable? Gigabite ethernet cables? WAN vs Lan cables? Will I need to better Modem? What is the best Modem to get? Will I need to upgrade my standard internet service?

  • Usb automount problem

    hi,    I run kdemod3 on arch64: with: hal-0.5.13 and policykit-0.9 all works ok, until some days ago, I have this error: Rejected send message, 1 matched rules; type="method_call", sender=":1.8" (uid=1000 pid=2537 comm="kded [kdeinit] --new-startup)