Finding Vol Reference and Order Reference

I recently ordered BT Infinity and was about to claim my Sainsbury Gift Card. Unfortunately I seem to have deleted my original email from BT concerning the order so can't find my Vol Reference or order number.
According to the FAQs on the gift card page I should be able to find my vol reference on my bills. I can't see it anywhere.
Would I be able to get both of these through BT customer service?

try live chat
live chat
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Where do i find the reference number for my preorder? and yes i no this is prob a dumb question but i cant find it anywhere......

Where do i find the reference number for my preorder? and yes i no this is prob a dumb question but i cant find it anywhere......

Hi droidboy52999,
Your email won't have the same confirmation number as it was ordered over the phone. You will need the last name used for the order, the location code (this ends in 01) and an order number (five to six digit number). Please keep us posted if you need further assistance with this.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

High level contract and orders created with reference

Dear All,
The client is an integrated flat steel manufacturer. They have entered into quantity contract with high level products like for example Hot rolled coils + Cold rolled coils + Heat Treated plates 5000 T per month. There is no clear cut quantity breakup of each product. On monthly basis customer releases purchase orders with exact grade and dimensions. The requirement is to capture contact for 5000T and create orders with reference to the contract with necessary completion rule. Since exact break up of the high level products is not known controlling of order quantity to 5000T will involve lot of manual intervention. I was thinking in the contract we have high level material "X with 5000T and orders created with reference with actual materials like Hot rolled coils, Cold rolled coils and exact dimension/grade mentioned. Is this possible to have different materials in contract and order with enhancement?
Any other idea of fulfilling the requirements is welcome.
Thanks,

Hi Ramesh,
Go through EKPO there is a Table BANFN it will update when you create a PO with reference to PR
Do se11 > Table EKPO> CtrlShiftF10 > Assign any of PO no. in the EBELN > Execute > you will find BANFN table
it indicates Purchase Requisition Number. it will update when you create PO with reference to PR.
Regards,
Vraj

What does this error mean and why can I not find a reference to it ?

In my continuing saga to get the type of backups I want our new Basis
Admin had me use the brarchive option -ds to brbackup
brbackup -u / -p init$.sap -t online -m full -c -a -ds
the brarchive option being -ds
when the above was executed it gave the error
BR0197E Chained start not supported for '-ds'
I can find no reference to BR0197E anywhere
-pete

Hi,
Found it as an "Info" message, not "Error". But it seems your case:
<i>BR197I Chained start not supported for '%s'
Explanation: A BRBACKUP and BRARCHIVE backup in a single run is not supported for all combinations of parameters or options (for example, not for backups to disk with backup_dev_type = disk ).
Program response: The BRBACKUP/BRARCHIVE run terminates.
User action: Do not use the parameter or option in the message for the chained start.</i>
Regards,
JC Llanes.

My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Reference object in Notification and Order

Hi ,
I have a requirement to capture following in the reference Object for notification and Order
1. Functional Location
2. Equipment
3. Material
4. Serial Number
Configuration setting for overview of notification type doesn't have the option to capture all the above fields.
I am able to get all fields except Functional Location...
Please guide me
Regards
Anil Kumar

Anil,
I have just been looking at this same requirement.
Unfortunately you can only use the standard options for reference objects which does not allow for your requirement.
There are no user-exits/BADIs either, you would need to build a new screen and screen-logic which is a system modification.
The best I could do within the standard system is to include these fields on the Enhancement tab (user-exit IWO10018) or build a bespoke front-end via ABAP or HTML. GUIXT is another option.
PeteA

Vol reference number

How do I find my vol reference number

Hi gemmx7,
Welcome and thanks for posting. I'm assuming you're after the order reference number? If so that'll be on your order confirmation email. If you can't find it let us know and I'll be happy to help.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to convert from Finder Object reference to POSIX path

I'm new to AppleScript. I'm super close to getting what I need done, but I've ran across a snag in the middle.
The error I'm getting is Can’t make quoted form of POSIX path of item 1 of {«class docf» \"filename\" of «class cfol» \"foldername\" of «class cfol» \"Desktop\" of «class cfol» \"Username\" of «class cfol» \"Users\" of «class sdsk» of application \"Finder\"} into type Unicode text. the problem area is highlighted and notated below. I've looked all around online but can't find what I need.
Thanks in advance for any and all help!
set text item delimiters to "."
tell application "Finder"
set theFilestoChoose to every item of (choose file with prompt "Please select the file(s) you would like to move and rename" with multiple selections allowed) as list
display dialog "Would you like to move these files to an existing folder and then rename them, or create a new folder and then rename them?" buttons {"Move to an existing folder and rename", "Create a new folder and rename"}
if result = {button returned:"Move to an existing folder and rename"} then
set firstnewname to "Aauuttoommaattoorr"
repeat with index from 1 to the count of theFilestoChoose
set theFilesChosenbeingrenamedfirsttime to item index of theFilestoChoose
set filenamecount to text items of (get name of theFilesChosenbeingrenamedfirsttime)
if number of filenamecount is 1 then
set fileextension to ""
else
set fileextension to "." & item -1 of filenamecount
end if
set the name of theFilesChosenbeingrenamedfirsttime to firstnewname & index & fileextension as string
end repeat
log theFilesChosenbeingrenamedfirsttime
set choosingtheplacetomove to choose folder with prompt "Select the folder to move to"
set thechosenfoldersname to name of folder choosingtheplacetomove -- sets the folder name as text
set AppleScript's text item delimiters to {"-"}
set Numberofthemonthatthebeginningofthefoldername to text item 1 of thechosenfoldersname as string -- for later to append the number back on without having to ask again!
set shortenedname to text item 2 of thechosenfoldersname as string
set the name of choosingtheplacetomove to shortenedname as string
set thefolderstemporarynameaslocation to choosingtheplacetomove as string
move theFilestoChoose to folder thefolderstemporarynameaslocation
log theFilestoChoose
set allfilesindestinationfolder to every file in choosingtheplacetomove as alias list --
set aInitials to the text returned of (display dialog "Whose camera were this/these pictures taken on?" default answer "")
set filteredList to my filterList(allfilesindestinationfolder, aInitials) as list
log filteredList
-- everything above this is correct so far and works perfect
--TROUBLE SECTION BELOW
set theSortedfilterList to (sort filteredList by creation date) -- something happens here with the theSortedfilterList that makes it unintelligible to convert to POSIX later. but I need the files in the order that this line puts them.
log theSortedfilterList
set timetorenamelasttime to theSortedfilterList
set newbasename to shortenedname
repeat with index from 1 to the count of timetorenamelasttime
set theonefile to item index of timetorenamelasttime
set theonefilenamecount to text items of (get name of theonetwothreefile)
if number of theonefilenamecount is 1 then
set fileextensionone to ""
else
set fileextensionone to "." & item -1 of theonefilenamecount
end if
tell application "System Events" to set CreaDate to creation date of file theonefile
set CreaDate2 to CreaDate as text -- need to trim down to the first 10 characters and eliminate the "-"
set AppleScript's text item delimiters to {""}
set shorteneddatename to text items 1 thru 10 of CreaDate2 as string
set the name of theonefile to shorteneddatename & {"-"} & newbasename & {"-"} & aInitials & {"-"} & index & fileextensionone as string
end repeat
--Trouble section above
set the name of choosingtheplacetomove to Numberofthemonthatthebeginningofthefoldername & "-" & shortenedname as string -- returns the month prefix to the foldername
else if result = {button returned:"Create a new folder and rename"} then
set repeatConfirmation to true --Boolean to decided if script should be repeated; default is to repeat
repeat while (repeatConfirmation = true) --Repeat if Any Tests Are Failed
set thefirstquestion to choose from list {"January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"} with title "Event Month Selection" with prompt "Select the month in which the event started. Select only one month:"
set theMonthAnswer to result
if theMonthAnswer = false then --"For historical reasons, choose from list is the only dialog command that returns a result (false) instead of signaling an error when the user presses the “Cancel” button."
set repeatConfirmation to false
set exitingeventmonth to display dialog ("You are exiting selecting the event month phase of the program. You will need to manually fix this decision") buttons {"OK"} with title "Exiting Event Month Selection"
if button returned of exitingeventmonth = "OK" then
set theMonthAnswer to ""
end if
else
set confirmationanswer to display dialog "You selected " & theMonthAnswer & ", is this correct? " buttons {"Yes, that's correct.", "No, the picture(s) are from a different month."} with title "Confirm Event Month Selection"
if button returned of confirmationanswer = "Yes, that's correct." then
set repeatConfirmation to false
else
display dialog ("That's okay, you can select another again!") buttons {"OK"} with title "Return to Event Month Selection"
end if
end if
end repeat
log theMonthAnswer
if theMonthAnswer = "" then
set monthtonumber to "You have cancelled this action."
log monthtonumber
else if theMonthAnswer = {"January"} then
set monthtonumber to "01"
log monthtonumber
else if theMonthAnswer = {"February"} then
set monthtonumber to "02"
log monthtonumber
else if theMonthAnswer = {"March"} then
set monthtonumber to "03"
log monthtonumber
else if theMonthAnswer = {"April"} then
set monthtonumber to "04"
log monthtonumber
else if theMonthAnswer = {"May"} then
set monthtonumber to "05"
log monthtonumber
else if theMonthAnswer = {"June"} then
set monthtonumber to "06"
log monthtonumber
else if theMonthAnswer = {"July"} then
set monthtonumber to "07"
log monthtonumber
else if theMonthAnswer = {"August"} then
set monthtonumber to "08"
log monthtonumber
else if theMonthAnswer = {"September"} then
set monthtonumber to "09"
log monthtonumber
else if theMonthAnswer = {"October"} then
set monthtonumber to "10"
log monthtonumber
else if theMonthAnswer = {"November"} then
set monthtonumber to "11"
log monthtonumber
else if theMonthAnswer = {"December"} then
set monthtonumber to "12"
log monthtonumber
end if
set theNameofFoldertoMake to text returned of (display dialog "Please enter the name of the new folder you are creating:" default answer "" with title "New Folder Name")
set LocationOfNewFolder to choose folder with prompt "Choose the location of the new folder you are creating:"
set theNewNameofFoldertoMake to monthtonumber & "-" & theNameofFoldertoMake
set newfolderaction to make new folder at LocationOfNewFolder with properties {name:theNewNameofFoldertoMake}
move theFilestoChoose to newfolderaction
end if
end tell
--function
on filterList(allfilesindestinationfolder, aInitials)
set patterns to {aInitials as string, "Aauuttoommaattoorr"}
set output to {}
repeat with aFile in the allfilesindestinationfolder
repeat with aPattern in patterns
set filepath to aFile as string
if filepath contains aPattern then
set end of the output to aFile
exit repeat
end if
end repeat
end repeat
return output
end filterList

Okay, so you wanted the debugging and error messages. Thank you for the coaching. Here is what I get from the following line:
set theSortedfilterList to (sort filteredList by creation date)
log theSortedfilterList
Log returns:
(*document file Aauuttoommaattoorr3.AVI of folder SnowDay of folder Desktop of folder Username of folder Users of startup disk, document file Aauuttoommaattoorr2.MOV of folder SnowDay of folder Desktop of folder Username of folder Users of startup disk, document file Aauuttoommaattoorr1.mov of folder SnowDay of folder Desktop of folder Username of folder Users of startup disk*)
set pxFile to POSIX path of ((theSortedfilterList) as alias)
Error: "Can’t make {«class docf» \"Aauuttoommaattoorr3.AVI\" of «class cfol» \"SnowDay\" of «class cfol» \"Desktop\" of «class cfol» \"Username\" of «class cfol» \"Users\" of «class sdsk» of application \"Finder\", «class docf» \"Aauuttoommaattoorr2.MOV\" of «class cfol» \"SnowDay\" of «class cfol» \"Desktop\" of «class cfol» \" Username \" of «class cfol» \"Users\" of «class sdsk» of application \"Finder\", «class docf» \"Aauuttoommaattoorr1.mov\" of «class cfol» \"SnowDay\" of «class cfol» \"Desktop\" of «class cfol» \" Username \" of «class cfol» \"Users\" of «class sdsk» of application \"Finder\"} into type alias." number -1700 from {«class docf» "Aauuttoommaattoorr3.AVI" of «class cfol» "SnowDay" of «class cfol» "Desktop" of «class cfol» "Username" of «class cfol» "Users" of «class sdsk», «class docf» "Aauuttoommaattoorr2.MOV" of «class cfol» "SnowDay" of «class cfol» "Desktop" of «class cfol» "Username" of «class cfol» "Users" of «class sdsk», «class docf» "Aauuttoommaattoorr1.mov" of «class cfol» "SnowDay" of «class cfol» "Desktop" of «class cfol» "Username" of «class cfol» "Users" of «class sdsk»} to alias
That is why I labeled it with Finder Object reference won’t return POSIX path, because I tried what was suggested about using the POSIX path of line. I thought seeing the lines above and around it would help set the context.
So I need those files, but I need them sorted by creation date so that they’re in that order for the next renaming step.

Where can I find the reference for modifying registry key for acrobat reader

I am a Web Developer and I need to limit the option the user may choose in acrobat reader plugin.
I doubt if there is option to configure in Windows Registry on HKCU\Software\Adobe\Acrobat Reader\9.0\PrefsDialog.
Anyone know where I can find the reference for those registry key?
I have downloaded sdk91_v2_win.zip file but I cannot find any reference.

Refer to this:
Direct Download Links for Adobe Software
Mylenium

How to find references of a Property in the class through code? similar to 'Find All References' in Visual Studio Environment.

Hello,
I am trying to find a code to find all the references of the property defined in a class which is very similar to 'Find All References' function available in Visual Studio environment. But I want to have it in code during run time. How to do it?
e.g
=>Property 1
private int _Salary;
public int Salary()
get{return _Salary;}
set{_Salary = value;}
=> Property 2
private int _Bonus;
public int Bonus()
get{return Salary * 2;}
Like in the above example I have two properties Salary & Bonus. Bonus is calculated from salary. As soon as I set a value to Salary, value of Bonus gets updated.
Similarly I want to get reference of all other properties or methods in the class or program which are affected when value of Salary is changed through code.
Conclusion - I want to have a method or function, so that whenever I set a value to some property in a class, I want to have a list of all the other properties(List<Property>) or methods which are affected and in which the changed property is referenced.
Please help me to achieve this.
Siddharth.Shinde

This is not something possible, as requested, even with reflection.
I can't find the reason for having that kind of implementation at runtime.. your compiled assembly is not going to change once it's compiled.
The way references are listed from within visual studio is probably using metadata gathered from the background compiler. When you write code, the compiler run pre-compilation tests, this is the same feature that will display error in your code before you
compile, or complete your intelisense for types that aren't even compiled in the assembly.
So, the only way for you to analyze this kind of thing would be to use something like ILDASM to disasemble your compiled libraries and gather metadata from the resulting MSIL. That would not work if you are using code obfuscation by the way.

I'm trying to find all references to a domain in ISE

We've renamed our internal domain and I'm looking for a way to find all references to our old domain so I can delete it. I've gone through all of the authorization/authentication/etc. and it still says "Error One or more of the groups being deleted are referred to by another component..." I don't know where it's being referenced to update/remove it.
Anyway to locate all references to an object?

Hello David, unfortunately there isn't such a feature in ISE. I used to do voice for a while and CallManager has a nice feature called "dependency records" which would do exactly that :)
Here are a few places you can check and see if the AD configuration is being referenced:
- Identity Store Sequences
- Guest portal authentication
- Sponsor portal authentication
- My Device Portal
- ISE administrative access via AD
- Client Provisioning rules
- Posture Assessment rules
- Custom created authentication and authorization conditions that were saved to the library
- Default authentication/authorization conditions in policy sets
I hope this helps!
Thank you for rating helpful posts!

Error -2000 unable to find data reference

Hi
Ive just recently installed the SP2 Windows update and I suddenly cant run mov files in Quicktime. When I do run them I get an error "error -2000 unable to find data reference" . These mov files used to work . Ive uninstalled QT and reinstalled but it did not change the problem - Im running the latest QT available which I think is 7.5.5. When I unistalled QT I did not unistall Itunes
It has been a while since I ran these files but the Windows SP update is the most recent change I can think of
Any ideas on how to fix this would be appreciated

You need to check your datasource name jdbc/AIADataSource
Check out your data-sources.xml to make sure you didn't mistype it.

Error in system Plist - Can't find any references

During a recent scan with Onyx, it found a Plist with an error, but I'm unable to find any references to the plist itself..
/library/preferences/com.apple.systemuincom.plist
Appreciate any assistance if someone recognizes the name and/or function. Last access was back in November, so I'm assuming not a critical or commonly updated file.
Thanks.
Jay S.

Is your system misbehaving in any manner?
Is your data backed up?
If you answered no to either question, don't run Onyx.

Help on finding a reference to a table

Hi ,
my oracle verion : oracle 10G
if i fire a query something like :
select * from user_source where text like '%CLASSIFICATION%'
it will return me rows and help me narrow my search onto a mere 100 rows to find a reference for a table called 'WC_CLASSIFICATION_D' and tells me lets say which all packages are having a reference for this table. But the thing is its letting me know for a particular user , Now lets say if i have around 20 users in my database , with every single user writing a few packages that contains reference to the same table , How do i find that out.
PS : I hope I am clear with my question , what i am having a feeling is that there would be a table tht could contain the user code for the entire database ..please help
Regards
Rahul

Better yet, DBA_SOURCE (if you have access).
USER_SOURCE contains source for all PL/SQL objects owned by the current user.
ALL_SOURCE contains source for all PL/SQL objects for which the current user has at least some privileges. (Well, there is a privilege requriement for it to be seen here; it may be more subtle than my statement of 'at least some privileges'.)
DBA_SOURCE contains source for all PL/SQL objects in the database.
This naming/privilege convention is used for many of the SYS catalog views (USER_TABLES, USER_OBJECTS, etc.)
Every user has access to the USER_ views and the ALL_ views, but different users may see different content. The DBA_ views are generally not public; you need a privilege such as SELECT ANY DICTIONARY to see them.
By the way, USER_SOURCE does not have the source for views or materialized views. Use USER_VIEWS and USER_MVIEWS if you need those.

How can I find the reference field of components ?

Hi everyone ;
I am a Junior Abap Developer. I am creating a structure that I will use in the report program. When I create a structure , some of the components needs to get reference field.Ex: NETWR,BTGEW,KWMENG. How can i find the reference field of component?

Hi,
You have to put entries for currencies and quantity fields for these fields,
Like for NETWR reference table is VBAK and field is WAERK,
for other Quantity field you can use MEINS as reference field.
You can check the reference table and reference fields in the respective tables( i.e. VBAP here).
Thanks,
Anmol.

Finding Vol Reference and Order Reference

Similar Messages

Maybe you are looking for