Findsmb not on lion.. how to get the same information
I need the list of samba share on a local network.
how can I get the same result of findsmb command available on snow leopard and not on Lion?
I need these information via command line.
How can I use command like smbutil, nslookup... or what to obtain the list of Netbios name and IP (like findsmb output).
PS: sorry for my english
At this time it is not possible to do what you want. Genius mixes in iTunes are on iOS devices are simply going to be different.
Similar Messages
-
I have an iPod mini library which I have update. I now have an iPhone 4S which I have synced to the library using a MS XP computer. I can not figure out how to get the library to download to my iPhone?
Thanks, This caused me to go back and try again since the solution seemed so simple. What I did was when it started downloading, it started with the iphones apps to my computer. I did not want the apps downloaded on my computer so I stopped it. If I would have waited, the music was uploaded right after the apps were downloaded.
-
I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?
ebony --
So, when you open your main Applications folder, there is no Office app there?
It's in your Users>Applications folder? -
If I do not have the macbook with me and in the bill is not writing? How to get the Serial Number true Itunes?
https://support.apple.com/kb/HT2526
-
Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
"Data only" csv export. How to get the same data?
When I export to csv I get more data than when exporting to "data only". Why and how to get the same as when using "data only". I suppose it is because of some supressed lines, but why there is difference in the view (which is right) and in the export file?
I do not want to export to xls with "data only" and save as csv, because the exported csv is being read by another application, which is unable to convert it automatically.
The other way is to put constraints in the data selection for the whole report (and not by supressing lines). How to say {table.date}>=maximum({table.date}) in the in the data selection? There is not possible to use "maximum". Probably possible with array?
Thanks in advance
Edited by: Kiril Bojilov on Aug 4, 2009 12:34 PM
Ok, I managed it: I put the constraint in the group selection
Edited by: Kiril Bojilov on Aug 4, 2009 12:46 PMNew customers get more options because new customers didn't already agree to complete a 2yr contract before being able to get a new phone. If you had a line that wasn't under contract, you would get a better deal than new customers because while they pay $35 activation fee for a new line, you pay $30 upgrade fee for using an upgrade. You just have to finish your end of the deal before you can start a new one.
-
I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close. There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.
Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself. -
How to get the log information when using a class?
Hi All,
I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
class LogClass {
private static final Log LOG = LogFactory.getLog(AClass.class);
public void logit(){
LOG.debug("This is the debugging log.");
public class AClass{
public static void main(String[] args) {
LogClass l=new LogClass();
l.logit();
}But this way, I do not get the log information from the class LogClass. Could anybody please help?
Many thanks.jschell wrote:
jverd wrote:
...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
Since the OP seems to have vanished, we may never know. -
I am based in India, and during my travel to Dubai in recent past i bought I phone 5 S. After reaching my country and i started using my new phone and i am surprised to find that it doesnt have facetime. How do i get the same??
rakeshfromkolkata wrote:
How do i get the same??
You get a new phone not made for KSA and UAE markets. There is no way to get FT on your phone as it has been permanently crippled by law. -
How to get the line information when double click the ALV line?
LOOP AT it_outr.
AT END OF vornr.
REFRESH it_out.
CLEAR it_out.
LOOP AT it_outt WHERE nplnr = it_outr-nplnr
AND vornr = it_outr-vornr.
MOVE-CORRESPONDING it_outt TO it_out.
APPEND it_out.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_pf_status_set = 'HANDLE_EVENT_PF_STATUS'
i_callback_user_command = 'HANDLE_EVENT_USER_COMMAND'
is_layout = ls_layo
it_fieldcat = lt_fcat
it_events = lt_evts1
is_print = ls_prnt
TABLES
t_outtab = it_out
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDAT.
When we double click a field, how do we get the line information with the field?
READ TABLE it_out INDEX rs_selfield-tabindex. is not worked, because the table it_out is changing.hi
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
* I_CALLBACK_PF_STATUS_SET = ' '
*I_CALLBACK_USER_COMMAND = 'USER_COMMAND'*
* I_CALLBACK_TOP_OF_PAGE = ''
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
* I_GRID_TITLE =
* I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = RT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER = 'X'
* IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT = G_VARIANT
IT_EVENTS = XT_EVENT
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE U_UCOMM.
WHEN '&IC1'.
READ TABLE IT_FINAL INDEX US_SELFIELD-TABINDEX INTO WA_FINAL.
CHECK SY-SUBRC EQ 0.
CASE US_SELFIELD-FIELDNAME.
WHEN 'VBELN'.
SET PARAMETER ID: 'VF' FIELD WA_FINAL-VBELN.
CALL TRANSACTION 'VF03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
regard,
nawa -
How to get the copyright information for an image?
How would I get the copyright data from an image in the DAM?
Assuming you are using image component[1] on a page and copyright is a string. As a sample you could use [2] to get the copyright information. I am not well versed with the API as there might be an better option to implement. But this just gives you an idea for the information you were looking for.
[1] /libs/foundation/components/image/image.jsp
[2]
Node refNode = resource.getResourceResolver().getResource(ResourceUtil.getValueMap(resource).get("fileRe ference","")).adaptTo(Node.class);
String copyRight = refNode.getNode("jcr:content/metadata").getProperty("dc:rights").getString() ; -
How to get the same look as flash for borders?
Hi i have selected circle and filled the circle with some color. now i want to have border around the circle so i have saelected stroke from the edit menu and applied with one pixel. how ever it is not giving a solid look as in flash. in photoshop the border looks like disolved and transparent. is there a way to get the same look as flash?
Look at the image. i have described everything there in the image itself. even when we use layer style it is the same problem. is there a way to resolve this? the text in the image is as below.
if u carefully observe the circle pointed there is a slight gap between the border and the filled color. This is not good. i dont want any gaps between the border and the filled color. I have used bucket to fill the circle and used stroke from edit menu to get the border for the circle. -
How to get the same colored labels as in the gmail web interface?
Hi,
I would like to get the same preview in Mail.app (with different colored labels) as in Gmail. Currently, my Gmail account in synced with Mail.app, hence I have access to all my mailboxes (hence all my labels). I would like to add a rule which reads as :
if Message is in (gmail label mailbox)
then Set color to (color)
However, this feature doesn't seem to be here. Basically, how to automatically colored a message being in a given mailbox (to get a nice rainbow in my general Inbox).
Thanks in advance!
DamienI'm pretty sure you can't do that in Mail. If you do find out, post back—I'd like to know too!
-
IPhone SDK: UIWebView - How to get the anchor information from URLRequs
I was planning to use the UIWebView but i am stumped now.
When the user clicks on a hyperlink, the web view delegate shouldStartLoadWithRequest is called and it does not contain the anchor information.
For e.g. if the href is say #01_02. This to a normal browser is a local anchor. The URL in the NSURLRequest contains just the file name information not the anchor.
In my particular case a anchor can be some other view of the topic which i will generate and keep it ready for the browser at this point. But since i don't get the anchor information it just shows the current page.
Is there a way to get the original value encoded in the HREF?
Thanks in advance,
-TRSI may not have understood your question but if you want to pull out the anchor information out of a request, have you tried the fragment property of the NSURL object?
// request is type (NSURLRequest *); within shouldStartLoadWithRequest
NSString *fragment = \[\[request URL\] fragment\];
Usually this will have the anchor without the #, in your case 01_02. -
How to get the spool information for a job
Hi,
After a job is run, how to get the spool inforamtion. which API can be used.?
Thanks in advance.
Johnney.Hi,
thanks for your reply.
My requirement is as followings.
1. Report Z_REPORT_TEST
EXPORT RUNUUID = '****************' TO MEMORY ID sy-repid.
2. In Funciton Module Z_FM_test
create a job(Z_JOB_TEST) to run report 'Z_REPORT_TEST'.
after the job is run successfully.
question is
how to get the RUNUUID exported from the report ????
Thanks & Best Regards,
Johnney.
Maybe you are looking for
-
I had on old copy of Adobe Acrobat Pro 7 which I purchased full price. I needed it to fill in my mothers inheritance tax. I could not activate it so was in the trial period. I contacted Customer support to be allowed to activate it. They asked no
-
i was wondering is there a limit to how many times i can restore my iphone 4? i mean, does it refuse to restore after a certain amount of time? i just had to restore mine a few times the past couple of weeks and i was wondering if this can have any n
-
My daughter dropped her phone briefly in water let it sit in a bag of rice for days then it turned on the suddenly it went to a blue screen?!! Plz tell me we can save the pictures
-
Can i unlock my iphone to be factory unlock
hi there please can appel make my iphone factory unlock and how regards bilal
-
Using 1st Gen iPhone for calls in Europe (Spain)
I have the original iPhone and I'll be travelling in Spain for a week, where I would like to buy a SIM card with a modest amount of voice minutes, say 200. I do NOT need data (although if I could easily get it I would of course take it.) I do not wan