Finf=d the token of Remote appl.

Hi,
Maybe a simple question.
But I want to use a remote appl.
This application uses SOAP and it needs the token.
But where can I read the token for this application ?
I use Teaming 2.0
Greetings,
Rob

robwierenga,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Macbook air mid2012 can use the Remote Apple Control?

I want to know if a Macbook air mid2012 can work with the Remote Apple control. If so, how should I configure my macbook air to make it work?

No MacBook Airs can work with the Apple remote. They do not have an IR sensor.
Apple are phasing the remote out.
If you have an iPhone, it can be set up to operate as a remote for your MBA.
There are 3rd party IR remote setups if having a remote is a must (say for training using Keynote).

Dock + Remote apple in the ipod 3g reset while viewing videos

Hello.
I have the following problem is my ipod nano 3g 1.1.3 connected to the dock of apple and driving with the remote apple.
The problem is that the iPod is reset when you press forward or play / pause while playing videos, I have tested with the podcast "Apple Special Event, October 2008", the reset is random.
Any idea? in support of apple I have sent this url, but I have not managed to solve the problem http://support.apple.com/kb/TS1517?viewlocale=es_E
the iPod is connected to the apple tv composite video
Os the functional dock + apple + remote video components with the iPod nano 3g, when playing videos? are you reset the ipod?
Thank you very much.

This rather depends on whether it broke because it was faulty - in which case it would be covered - or it broke because it was damaged - in which case it most likely wouldn't be.
In any event the best thing would be to deal with Apple directly. Please see this page:
http://www.apple.com/support/ipod/service/faq/#repair2
and please particularly note the caveats in section 3 about not retaining the data and the possibilty of a replacement having a later OS.
Also please note http://www.apple.com/support/ipod/service/faq/#warranty5

Hi, my ipad got stolen and i was wondering if there is anyway of finding out the serial number remotely from another apple device?

Hi, my ipad got stolen and i was wondering if there is anyway of finding out the serial number remotely from another apple device?

If it iwas registered to your account then you should be able to get it from your support profile : https://supportprofile.apple.com/
If not then do you have a backup of the iPad on your computer's iTunes ? If you do then in iTunes go into Edit > Preferences (iTunes > Preferences if using a Mac) and on the Devices tab on that hover your mouse pointer over the iPad's backup : http://support.apple.com/kb/HT4061

What are the bad things about Apple Remote Desktop

What are the bad things about Apple Remote Desktop? Need it for my assignment

Is your assignment about managing a classroom full of Macs?
Otherwise, Screen Sharing, or a VNC client/server, or TeameViewer.com, or LogMeIn.com might be better, and less expensive.
ARD is intended for managing a classroom or office full of Macs. It is overkill for remotely accessing a remote Mac or two.

Does nano 6g work with the remote (apple in-ear headphones)?

Does nano 6g work with the remote (apple in-ear headphones)?
Is it possible to change volume and skip tracks?

Hello Homer,
According to this page from Apple they are.
http://www.apple.com/ipod/in-ear-headphones/
B-rock

What are the procedures for getting Apple to remotely wipe all my data off my ipad that was stolen? I have no hope of recovering it. Please advise asap...thanks!

What are the procedures for getting Apple to wipe the data off my original ipad I bought two years ago. I had it stolen from a hotel room over the weekend and it is not password protected and no I did not download app to find it.
Any hwlp would be greting appreciated!

Apple can't do it, only you could potentially do it if you had enabled Find My iPad on it before it was stolen.
If it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

How do you change the battery in an Apple TV remote

How do you change the battery in an Apple TV remote

There are no user serviceable parts in an iPad. Take the iPad into Apple for evaluation if
there is a problem. If needed, Apple can replace the battery for $99.00 US. Click here
for details.
https://www.apple.com/support/ipad/repair/battery-power/

I purchased my iMac used. When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it. Any ideas?

I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

TS1702 how can I get anyone to give us answer on the iphone apps casino game we purchased few days ago which once the token was finished we were not able to reset and play just for fun and not for gambling. we need help and not to be charged additional

few days ago I have purchased Iphone casino games from itunes apps store. One of the game was made by the company called "ARISTOCRAT" dragan game. Usually we will get basic tokens to play the game, and if we ran out of the tokens all we need to do is going into "manu" and "setting" selete "dream" and reset that we should be able to continue play the game with same amount of the basic tokens. The one game would not let us to go back to the game. There were msg came out said" game center requires an active connection to the internet"? I didn't feel comfortable because we purchased the game for $1.99 to play for fun and not to gamble. We do have credit card on your file. We don't want to be charged alot of money for something not in our well. I need help to answer the question on the following:
1. Are we able to ever play this game again without going to internet? We don't even know which site to go to, because when we press the ok button nothing else came out to direct us to any area.
2. We only purchased the few days ago order ID: MGT74GN6V7 on 10/03/12. all the other games we purchased we were able to continue to play by doing the same setting.
Thank you for your help and looking forward to hear from you!

You need to contact itunes support
We are all itunes users just like you.
http://www.apple.com/support/contact/

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

HT1212 I did not sync my iPad to iTunes on my PC. Now my iPad is disabled because I forgot my passcode when I set up iOS 7 on it. I have tried to use the support info from Apple AND the cut and paste responses from people in the community, but it does not

I did not sync my iPad to iTunes to my PC. Now my iPad is disabled because I forgot my passcode when I installed iOS 7 to it.
Before anyone cuts and pastes the info from Apple support in response to this, I have already tried those steps. iTunes simply states that it cannot do anything since the iPad is locked with a passcode. I cannot access iCloud to use that specific advice as iCloud will not let me sign in; a message keeps coming up reading that there is an error with the server. Remote Swipe? Not sure. It is three hours later, and I am no further.
What else can I do? I never had a passcode set up when I first got my iPad. I would have bypassed this with the installation of iOS 7 if I had known about this.
Thank you in advance.

You can only play 720p video.
Download the 720p or standard def version.

The light on my apple tv is blinking furiously. i've held down the menu button, plugged and unplugged it, and just tried restoring it via micro usb. but the restore downloads then says it can't finish because it can't write to the disc. lost lost

how do i get the light on my apple tv to stop blinking? have tried all the recommended methods, including holding down "menu" on remote, plugging and unplugging etc. when i try to restore via itunes it downloads then when it's done says it can't write to disc.

Hi lostinmedford,
Welcome to the Apple Support Communities!
I understand that the light is quickly flashing on your Apple TV and you are unable to restore it. According to the attached article, you are working through the correct steps by trying to reset and restore the Apple TV. In this situation, if the restore did not resolve the issue, it may be necessary to have the Apple TV evaluated for service by using the link in the attached article.
Apple TV: About the status light - Apple Support
Flashes quickly
Having issues. Try restarting or waking your Apple TV. If your Apple TV does not start up properly, you might need to reset the Apple TV or restore it to factory settings. See Apple TV (2nd and 3rd generation): Restoring your Apple TV. If this does not resolve the issue, refer to the Service FAQ for additional assistance.
Best regards,
Joe

Can you change the batteries in the older iMac remote control

I have the small white remote that came with my iMac in about 2003. Is their any information, like how to change the battery and/or how to pair it with newer iMac etc?

"...Front Row was introduced in late 2005 with the "iSight" iMac G5.
The iSight iMac was first Mac that utilized Apple's remote control"
~ from LowEndMac
re: Remote control unit was not available for iMac models before iSight iMac G5.
•Revive a dead Apple Remote - macworld:
http://www.macworld.com/article/2025164/reviving-a-dead-apple-remote.html
(see comments in above article for suggestion on re-pairing the unit to iMac)
•Stupid Apple Remote Tricks:
http://www.macinstruct.com/node/79
This article goes on to tell about the indentation or place on the remote
that you can press with an adequately shaped object, to open battery
compartment. Some difficulty may be due to stickiness of the door.
Hopefully this may help somewhat. The old battery number, if still in the unit,
may be used to locate a replacement cell of similar power & shape.
Good luck & happy computing!

I brought second hand iphone4 but i cannot open it because the owner forgot her apple id and password, how can i reformat this without reformating my phone outside?

I brought second hand iphone4 but i cannot open it because the owner forgot her apple id and password, how can i reformat this without reformating my phone outside? what can i do to open this? its till on the set up mode

There is nothing you can do about but ask the seller for your money back. Without the previous owners applid password, you cannot activate and use that device - there is no way around that. iOS 7's Activation Lock needs to be disabled by the previous owner in order for you to use it - if they cannot (or willnot) produce the password to disable it, you have no options.
They can disable it remotely for you - see http://support.apple.com/kb/HT5661 but not if they do not remember their own password.

Finf=d the token of Remote appl.

Similar Messages

Maybe you are looking for