Finger Print Device not found using Think Advantage Finger Print Software

3000 N100, the finger print device can not be found when trying to set up profiles. The computer had been restored to new state using the function key at startup.
I deleted programs I did not want after that but the Think Advantage was left as is, I believe. I can get as far as trying to create finger print profiles, then I get the finger print device can not be found.
I am XP SP3
E/.
Message Edited by EmClark on 05-19-2009 10:42 AM
Tinkering All The Time
E/.

Solved...I downloaded the updated Fingerprint software from the driver page and that fixed it.
Tinkering All The Time
E/.

Similar Messages

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?

Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both devices are connected ?

That does not involve iPhoto for the Mac in any way - try the iPad forum
I will request your post be moved
LN

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP 3050A : Device Not Found on Network

Hi,
Laptop Model: MacBook Air
Operation System: OSx Lion 10.7.3
Printer Model: HP 3050A
Router Model: Linksys WAG160N
WiFi Security Protocol: WPA
TCP/IP IPv4 Protocol: DHCP
Firewall Software: None
I have manage to connect the printer to my WiFi network as the blue indicator is ON and got an IP 192.168.1.104 with Excellent signal strength on the printer. But when follow the HP Setup Assistant I unpluged the USB then I got stuck with the following error message:
Device Not Found on Network
The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
Please make sure that:
• Your Mac is connected to a wired or wireless network that has access to your device.
• Your device is connected to the wireless network "speedy".
Click "Retry" to attempt to connect again using the current settings. Click "Go Back" to enter different settings.
I also tried to ping the printer IP but no success
Aliss-MacBook-Air:~ ali$ ping 192.168.1.104
PING 192.168.1.104 (192.168.1.104): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
ping: sendto: No route to host
I am able to print using USB without any problem, but the WiFi never success! Please help!
Regards

Hello,
Thanks for the post. With this one, we may a couple of issues. I've included a link below with some excellent information regarding network connectivity. I might suggest that we start there and try to determine if it's the printer, the MAC or the network. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02731071&tmp_task=solveCategory&cc=us&dlc=en&la...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

[SOLVED] Device not found and kernel panic

Hi,
I'm having an issue with the kernel. I get this weird error while booting:
Booting the kernel.
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
ERROR: device '' not found. Skipping fsck.
ERROR: Unable to find root device ''.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]# _
I don't have the slightest idea what to type in that shell, so I exit (^D) and get an error with its shell, another one and finally a kernel panic. Do I have to report the other two error as well? I think this might be related to a recent change in my syslinux.cfg. I wanted to add hibernation cabability to my arch, so I added "resume=/dev/sda2" (my swap) to kernel options. It should not yield such a result though. As a matter of fact, I get it even if I remove that parameter at runtime. For now, I managed to boot with Fallback Initramfs.
Here is syslinux.cfg, as well:
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 1 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
APPEND resume=/dev/sda2
INITRD ../initramfs-linux.img
# (1) Arch Linux Fallback
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/disk/by-uuid/dc891acc-9ff7-4d95-bba4-bc2e502301e7 ro
INITRD ../initramfs-linux-fallback.img
# (2) Windows
#LABEL windows
#COM32 chain.c32
#APPEND hd0 0
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com
Any ideas?
Thank you,
rubik
Last edited by rubik (2012-07-22 10:03:59)

Also, don't use "root=/dev/disk/by-uuid/...", that's just wrong. Udev kicks in after the bootloader phase.
https://wiki.archlinux.org/index.php/Sy … nux_Config
Here's mine:
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=UUID=978e3e81-8048-4ae1-8a06-aa727458e8ff ro quiet vga=current
INITRD ../initramfs-linux.img
And don't forget to mark it as solved.

HP Officejet 4635 Scan Software says Device Not Found

I just successfully installed my new HP Officejet 4635 and can operate it wirelessly. I am able to print and I can scan if I use the buttons on the device itself to tell it to scan. However, when I try to load the HP software, it says "Device Not Found". I tried using the HP Scan and Print Doc and it says everything is fine, but I still cannot load the HP Scan software. I need to be able to scan multiple pages into one file, and I cannot do this by using the control panel that is on the device itself. Anyone else have this problem?

Hello lookinforhelp, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help, but I do need a little information first. I am linking a couple of HP Support documents below that will show you how to find which operating system you are using. Also, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

In-built Audio device not found

Hi Guys,
My macbook pro suddenly finds no audio device inbuilt. And i can play no sound nor hear start up sound when switching on mac.
I get a 'no parking' like symbol beneath my audio options.
I've tried rebooting in safe mode, Resetting PRAM, Repairing permissions in disk utilities, use my ipod touch headsets, headphones.. NOthing worked.
And i'm feeling deaf whenever using Mac now.
Is there anyway to get the audio back ?
Thanks,
Raesh

Hmm.. Okay. Would give it a last try.
And I have a couple question before doing that..
1. I did the hardware test and It gave me this error .. " 4SNS/1/C0000008 :TPCD--24 "
But When i looked up for this error, it tells me a sensor problem. Not as Audio device problem. Do you think this hardware error of 'sensor' has something to do with audio ?
2. So in-built speaker isn't working, plugging in headphones cable isn't working. But i was wondering whether a bluetooth speaker would be recoganised in the system preferences > audio output device ? Will it work ?
Because i keep on reading that an " in-built audio device not found " problem is a huge one and it costs a lot to repair. They often provide solution of changing the whole logic board (Keeping fingers crossed). And with my warranty period over, I don't wish to go through that path. So want to know if external bluetooth speaker has a chance to get recoganised as an audio device, Then I would buy JBL bluetooth speakers. It seems good and less pricey than changing the whole logic board.
Let me know which way i can go, Thanks in Advance Man.
// Raesh.S

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Printer is not found

After a power outage that caused an interuption in our internet service, we are no longer able to print from our wireless printer. I have tried the many troubleshooting suggestions, checked "working offline," unistalled/installed printer, shut off/on printer and router, etc. As I try to install printer again, it says printer is not found, even when I try using a USB connection. The blue wireless light is shinging on my printer, my router is working, and I have not moved it (thinking it may be out of reach). Any suggestions?

Hi cooper492, Thank you for your reply! Please try the following steps: Clean boot the computer. How to perform a clean boot in Windows.Uninstall the software. Uninstalling the Printer Software.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows. Let's see what happens! Hope this works! “Please click the Thumbs up icon below to thank me for responding.”

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

Device Not Found

I have been using a Time Capsule with with Mac Air 13 inch for the last 1.5 years. the Time casule is the main wi-fi router in my network. off late i have started getting a message Device not found, where as the internet is connected. due to this error no data (time machine) back up is available. also this issue leads to internet disconnection on my Mac (where are other devices lice PC's and iphones are connected to the same network without any problem).
Please help me if anyone has a solution.

You hidden the most important thing.. the name of the TC. I don't know why as we can certainly not connect to it remotely.
The name looks wrong though if I am seeing it right.. in terms of being too long and having spaces.. and possibly many of them.
There is a bug.. if you reboot the TC this issue will go away for a few hours.. or days..
Have you rebooted btw??
Do a factory reset of the TC.
Change all names to SMB standard.. that means universal not Apple only.
SMB names that work..
Short.. 2-20 characters
No Space..
Pure alphanumeric.
You need that for TC name.. wireless name/s and hard disk share name.
Please see C9 for a more apple explanation of what long names do.
http://pondini.org/TM/Troubleshooting.html
I would also go back to 7.6.1 firmware.. if not earlier.. 7.5.2 is very stable.. but later Gen4 can only go back to 7.6.x

My probook says:Boot device not found Please install an operating

My Notebook says:Boot device not found
Please install an operating system on your hard disk
Hard disk (3FO)
F2 system Diagnostics
for more info please visit: www.hp.com/go/techcenter/startup
I was used HDD Seft-Test Options, it say "Hard Disk Passed". But i try to turn on notebook but fair: Boot device not found.
Is HDD died?
Please help me, thanks so much!
Sory my english bad.
This question was solved.
View Solution.

Hello hungvocam
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Thanks and have a great day!
Mario
I worked on behalf of HP.

Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)

Hello,
I tried to re-install de OS from windows 7 to windows 8.1 and when the bios update driever was installed and the laptop was restaring it appeared the folowing window and message:
Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)
After that i tried a lot of different ways to get to boot device select ...but i couldn't do anything. I removed the HDD and i put it back, i've tried with holding in the same time windows +B and pressing the power button in the same time for 1..2 seconds and then i've waited for at least 1 minute..and it didn't appeared anything on the screen. I've done the hard drive check and it passed. The weirdest thing is that when i want to select a boot device to re-install again the OS, i can't see any boot device to select. I need to mention that i've formatted the HDD in another computer. I dont care about the informations from the HDD beacause i saved all the informations on another device storage.
Please help me repair this problem!!! thanks a lot!
Have a nice evening.!!!

Whenever you get a message stating that the boot device not found it could be because of bad sectors on the Hard Drive. Its not necessary that the Hard Drive Test should fail to determine if the Hard Drive if its faulty or not. Sometimes even if the Hard Drive Test passes the Hard Drive will still not work because of the bad sectors in it.
Best way to find out if its the Hard Drive you can try the Hard Deive on a different Notebook which would help you determine if it's faulty or not.
Could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files.
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
Please check your notebook warranty to verify the status and order a new Hard Disk Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

My screen says boot device not found. Please install an operating system on hard drive,

My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
3. Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Finger Print Device not found using Think Advantage Finger Print Software

Similar Messages

Maybe you are looking for