Finger Print problem pavilion dv7-4152si not working

I have a HP Pavilion DV7-4152si and the finger print reader will not work. Notebook was sent for repairs a while back as hard drive crashed when was new and has not worked since.

Hi @Sean-Ireland
Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • Quicklaung​e buttons on my HP Pavilion dv7-2260ed not working and always red

    The quicklaungebuttons (Mute, Volume, cd options and wireless) on my HP Pavilion dv7-2260ed stopped working and are always red.  This happend 3 weeks ago. I runned the HP assistent but no errors were found. Any help is welcome

    Hi, I have more or less exactly the same problem.
    I own a pavilion dv7 1090eb, which originally had Vista 32bit on it, but I updated to Windows 7 32bit more than a year ago,
    not long after 7 was released. Ever since that update (or a few days after, I don't really remember) I've been having problems with the quick launch buttons.
    For over a year it was just my mute button that was always orange. I could still mute my sound, but when not muted, it sounded like it was really filtered, all the low and the high were gone, only low mid sounds remained.
    My jack exits, both of them, however, still work fine, and I have good audio through external speakers, so I kind of solved that.
    But still, the laptop itself has great sound, so I should be able to get that without having to carry around external speakers wherever I go.
    Oh and I used to have the same problem with Vista from time to time, but after rebooting it would just go back to normal.
    But now just today, I left my laptop on for about 2 hours for some image rendering while I was away, and I switched the wifi off, which I usually do when I leave my laptop unattended. But when I came back, it wouldn't turn back on again, and none of the quick launch buttons worked anymore.
    I tried reinstalling all drivers after I did some troubleshooting options which didn't work.
    Turned it off and on again a couple of times.
    Then found this thread and installed the above link, rebooted, still doesn't work.
    What now? What can I do to resolve this problem?
    I really hope I can get a solution for this.

  • Upgraded window from vista to 7 on pavilion DV7 sound not working

    Pavilion DV7 1468NR upgraded windows from vista 64 to windows 7 64 sound not working

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45073.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    If you still have no audio, open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Start-up Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type',  select Automatic and click Apply to save the change.  Then click the Start button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Care button and finger print reader for 3000 N200 not working

    I have bought Lenovo 3000 N200 model. THe Care button and finger print reader not working. I have loaded the hot key driver as well as finger print reader driver. I have XP OS on my notebook. The software for finger print reader for XP (64 bit) which is there in the lenovo site is not getting loaded.
    Kinldly help.

    Hi @Sean-Ireland
    Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Finger print sign in option does not work

    I am trying to set up a sign in on my profile to use my finger prints. When I try to scan my fingerprints, I get the message,
    'Fingerprint sign on is disable. Contact system administrator.' I am the system administrator according to my account. How do I fix this?

    Is it a Desktop or a Laptop?Which model are you using?
    Ensure your finger is at the same angle as it was during enrollment. Even moderate changes in finger angle during swipe can cause the error.
    Delete and recreate fingerprints.
    Enter the BIOS and Clear Fingerprints data from BIOS.
    Uninstall and reinstall software
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • CD/DVD Drive Drivers for HP Pavilion DV7-4152si

    Hi guys
    I have a HP Pavilion DV7-4152si and i am trying to reinstall windows on a completely new HDD.
    My previous HDD blew up and i never made a recovery disk.
    i tried to get the CD/DVD Drive driver on HP's website but cant find anyhing of te sort could somebody please advise me on what to do.

    That usually indicates that the DVD drive has an issue.
    You can try updating the firmware to try to resolve the issue, but that usually does not help. You have an older notebook and unfortunately the DVD drive has gone south.
    I recommend:
    Testing your notebook's DVD drive by using a live version of Ubuntu on a usb flash drive.
    Using an external usb DVD drive or the less expensive solution of creating a usb Windows installer. I usually use the Microsoft store's Windows download\usb tool to do that. the useage instructions and a link to the tool are here.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Print icon on toolbar does not work

    Recently bought new computer running W7
    Use acrobat to print postage labels on royal mail site
    Have latest version of acrobat and when screen comes up showing label to be printed the 'floating' toobar appears but clicking on print icon has no effect
    I am forced to used 'CTRL P' and then 'enter'
    Occasionaly CTRL P gives me another toolbar at the top of the window which also has a print icon, this does nothing either
    Can anyone suggest what is going wrong, should I go back to an earlier acrobat that worked fine on my old XP PC ?
    Thanks
    Graham

    Thank you
    Yes you are correct using a PDF in browser to print post labels.
    Running Windows 7, Internet explorer 9, Acrobat Reader Version 10.0
    CTRL P brings up dialog box OK and I can print from there.
    Cannot comment if problem happens outside of browser as it is home
    computer and do not have need to view PDF's offline but will find thsi
    out if important.
    Graham
    >--Original Message--
    >From: [email protected]
    >Date: 23/02/2012 13:18
    >To: "flat-pack"<[email protected]>
    >Subj: Print icon on toolbar does not work
    >HitenderPrakash [http://forums.adobe.com/people/HitenderPrakash
    created the discussion
    >"Re: Print icon on toolbar does not work"
    >To view the discussion, visit: http://forums.adobe.com/message/4224450#4224450

  • Why is my built in webcam and mic on my hp pavilion dv6-6113cl not working?

    why is my  built in webcam and mic on my hp pavilion dv6-6113cl not working?

    Enter the device manager and verify that the webcam is present and has a driver installed.
    1) Test your webcam by using the YouCam software that was delivered with your notebook. (you should also be able to test it with MSN or Skype setup). You may have to uninstall it and then reinstall the software. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    You will need to install the printer on your Mac
    Open System Preferences (gear icon) on the dock
    Open Print & Fax
    Click the + (plus) button at the bottom of the printer list
    Wait for your printer to appear in the next box, then click it to highlight it
    Click Add at the lower right
    Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
    You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

  • ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

    ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
    On right click nothing happens at all. I have  reinstall the ODI multiple times with right installer. issue persist.
    Please help.

    Hi,
    Did you use the generic installer or the win32 one ? You should use the former with Win64.
    You can also check that your version of Java is supported in the certification matrix.
    Regards,
    JeromeFr

  • I have pavilion dv6 sound not working hp provide new update idt stil not working

    HI .
    i have pavilion dv6 sound  not working hp provide new update idt stil not working

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Photoshop SC5. What's the problem, Automate / Batch, did not work.

    Photoshop SC5. What's the problem, Automate / Batch, did not work.
    Message was edited by: roomus

    What OS?  Details?
    What error message?

  • I got new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

    Igot new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

    Hello, krishna kumar.j. 
    Thank you for visiting Apple Support Communities.  
    I understand that you are experiencing and issue with your Home button.  Here are the troubleshooting steps when experiencing this.  
    Get help with buttons and switches on your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT203017
    Cheers, 
    Jason H.  

  • My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

Maybe you are looking for

  • Picking Relevancy of Service Line item in Inbound- a Challenge

    Hi experts I have a challenge. There is a Subcontracting PO having 2 line items, 1st one is Trading product which is the physical finished product & 2nd line item is service line item( service material type). So Can we create a Inbound Delivery wrt P

  • HT201263 i just bought my ipod touch 32mg i cannt get it to start up. when i get to the connect to itunes it wont let me go any further.

    i just bought my ipod touch 32mg, i cannt get it to start up.  when i get to the screen connect to itunes it wont let me go to any other screen to finish setting it up.

  • Lost receipt for iWork09

    Bought iWork09 2 yrs ago. I've worked up dozens of 'pages'.  I was cleaning up my hard drive & now I can't SAVE anything on pages in iWork. It says I have now bought it. I might of trashed the receipt. Any ideas on how to get that back without buying

  • Problem with frame

    the other day I was working with AE, as usual, but when I checked one of my "composition settings" the duration was different... usually there were the hours, minutes, seconds, etc. (es 00:00:00:00 ) but now there is the number of frames... I do not

  • Table of contents is broken up

    Hello, I am working on a document and for some reason half of my table of contents - about 3 entries - started appearing a few pages into the middle of the document.  I turned on invisibles but there is nothing unusual before the dangling area like a