Finger print reader will not work with password manager

i have the finger print reader working fine to log into windows but when i select advanced options for a password protected site in password manager,and custom security level ,when i click on protect with finger print,it says i have not enrolled any finger prints with client security solution,when i check the fingerprint tab in client security solution it shows my fingerprints what i have stored,why is this conflict happening?when i check my web email i want to be able to swipe my finger and log in not keep typing my password in,anybody know how to sort this??

Hi,
I have the same problem, help me please.
I have the 3000 N200 notebook, when I use the finger print to log on using the windows vista logon it work fine, but if I try to use it with ThinkVantage technology (such password manager) it told me that the device is not installed.
(Sorry for my english.)

Similar Messages

My finger print reader is not working and this unknown driver is not installing HP4230s

my finger print reader is not working and i have tried the downloads available on hp website and many other but its not showing in the area where we configure the passwords for the pc
and my other problem is as i have updated my pc to win 8 or 8.1 this device is not getting installed the hardware id is : ACPI\VEN_HPQ&DEV_0004
kindly solve these problems as i really want to use this finger print and i dont know what is this unknown device all about

my hp envy mp notebook fingerprint is not working, give the software for it !

Finger print reader does not work

i followed the directions and my print was scanned, rescanned,and the edges were scanned and accepted but the reader does not react when the phone is locked....i deleated and rescanned and followed all directions which accepted my finger print....once again thereader does not unlock the phone...any suggestions?

I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

Adobe reader will not work with games

adobe reader will not work with games

That is correct. Adobe Reader is intended for viewing PDF files, not for playing games. Perhaps you are thinking of Adobe Flash Player?

T410i - Finger print reader is not working

I have an unique case. Finger print reader is working fine while registering finger prints but not working while login or when prompts for authentication. !!!

Tried re-installing the fingerprint reader driver? Is the Client Security Solution installed as well?
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Tecra 9000: SD card reader will not work with XP

I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]

Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day

FF 33 will not work with TabGroubs Manager 2011.11.28.1

I reverted from FF 33 back to FF 32 because TabGroups Manager 2011.11.28.1 failed. I tried FF RESET, new profile, removed all add ons, clean install TGM and it still failed. I revert back to FF 32 and all is great. I realize or so it appears that TGM is no longer a recognized extension and is not perfect but it is a great tab-group manager with over 20K users last time I looked. I hope you fix the problem in FF 33 so it will work. I cannot image using FF without TGM. Why don't you build something like TGM into a new version of FF? Looking forward to a fix before I must switch browsers. Thanks

Hello,
Please contact the developer of that extension as it has not been updated in 3 years.
* https://addons.mozilla.org/en-US/firefox/addon/tabgroups-manager/
You can try to see if it works with the Classic Theme Restorer plugin:
* https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/
Please see the security advisories that have not been addressed in Firefox 32:
* https://www.mozilla.org/security/known-vulnerabilities/firefox/
Alternatively, if this extension is a necessity to your browsing experience, you can use Firefox ESR, on version 31.2.0 (so it will likely be compatible):
* https://www.mozilla.org/en-US/firefox/organizations/all/

Windows 8.1 Fingerprint Reader Will Not Work With IE11

After upgrading to Windows 8.1, I am having issues with Fingerprint Reader in Internet Explorer 11. I have upgraded to the latest Lenovo FPR software for Win 8.1 (6.0.0.8102) which has not helped.
FPR works fine to log-on into Windows 8.1.
When I try to activate the FPR in the LastPass Vault (IE11), I get an error message for a missing file - BIOCPL.DLL. I noticed that this file is present in the System32 directory for Windows 8 but it does not exist in Windows 8.1.
I copied biocpl.dll to the Win 8.1 System32 directory but it still doesn't work.
Any ideas??
E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
Solved!
Go to Solution.

Sounds to me like you are going to need an update to LastPass that is compatible with Windows 8.1.
BIOCPL.dll is the OS component that implements the Biometric Control Panel on Win7/Win8. But Microsoft moved all the Biometrics stuff from desktop into metro, in Win8.1. That's why this file no longer exists in the OS on Win8.1. Sorry to say, I don't think there is any possible solution to this problem other than asking the LastPass people for a new version.

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Newest version 6 will not work with Digitalpersona fingerprint reader, I want to reinstall version 5. Can you send me a link or tell me where to find it? Thank you! Howard L. Medinger

Foolishly, I got a message to install the newest version of Firefox and did so without considering the consequences. Now, my Digitalpersona fingerprint reader will not work and I have many many programs that I use this feature. (It enables me to avoid typing username & passwords for different sites). I have tried to find the older version 5 to reinstall it, but so far have not been able to do it. All the Mozilla sites just offer version6. HELP!

Yes, of course.
Here is the link for all of the versions:
[ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ Firefox All Releases]
Don't forget to hit 'Solved it'.
'''IMPORTANT NOTE: Don't forget that the previous versions might have security problems. For the latest security updates you MUST upgrade to latest version. That's what I STRONGLY recommend. If you really want to downgrade the recommended version is 3.6.21. Thank you for paying attention!'''

Finger Print Scanner is not working after downloading new operating system 8.1

hi,
recently i have installed new OS windows 8.1 for my HP PAVILION DV6 laptop, but my bluetooth and finger print scanner is not working. can any one suggest me solve my problem..
txs
best regards
karim

Hi @sam1211 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and Bluetooth and HP Simplepass complications since doing a Windows upgrade. Here is a link to the HP Support Assistant. Just download and run the application. Just to make sure all drivers and software are updated as well.
Here is a document on troubleshooting and using Bluetooth if needed. Under the tips for finding a Bluetooth device, there is a section on making sure the wireless communication is turned on. This is an important section.
Here is another document with some great information about Bluetooth fixes.
Here is a link to troubleshoot the HP Simplepass software.
The HP SimplePass Identity Protection Software must be updated to v8.00.57 or later. Here is a link to download the latest. You will have to uninstall the old software.
Hope this helps you with the Bluetooth and HP Simplepass.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Finger Print reader does not link to Win7 Logon Screen

Win7 Ultimate 64 bit
FingerPrint software 5.9.4
Biometric link to windows Logon accepted
MS Server domain client
At system boot, the logon screen appears and the fingerprint light is "on". I scan my finger, the light blinks once and no submission of the saved Windows password to the logon window. I must key in password.
Lenovo support asked me to uninstall software, BIOS clear saved finger prints then re-install (and re-register). I have done this twice with no change.
This was working until I had to break the domain connection (server change) and re connect to the domain with the same logon/password. It was at this time that the finger print reader stopped passing the biometric password to the OS.
Any thoughts on how to re-connect reader to logon?
Solved!
Go to Solution.

This was working until I had to break the domain connection (server change) and re connect to the domain with the same logon/password. It was at this time that the finger print reader stopped passing the biometric password to the OS.
Any thoughts on how to re-connect reader to logon?
I am using 5.9.4 with no problem, although I seem to recall having to go into the Fingerprint software and make some innocuous setting change, then change it back. But I was changing a lot of things at the time and don't know for sure if that had any effect.
Are you able to log onto the domain by manually entering your password? If not, may need to re-add the computer to the domain.
W520 | FHD | i7-2720QM | 8GB RAM | nVidia Quadro 1000M | Intel 510 120GB SSD | Seagate 7200rpm 500GB HDD
T510 | 1366x768 | [email protected] | 8GB RAM | nVidia NVS 3100M | Seagate 7200rpm 500GB HDD
T61p | 1920x1200 | [email protected] | 4gb RAM | nVidia Quadro FX 570M | Hitachi 320GB HDD | (broken frame, now a file server)

Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.

Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help

Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME

Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
The Printer Install Wizard can provide you additional information:
http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

I have recently switched ISPs and have anew e-mail address but ThunderBird will not work with this address. Have tried tech staff with Bell to no avail

My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you help

Why don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link.

Finger print reader will not work with password manager

Similar Messages

Maybe you are looking for