Fingerprin​t logon before OS is not working anymore

Hi,
with one of the last reboots fingerprint authentication before OS boots up is not working anymore. What I've changed I can't say, because I really seldom reboots my win7x64 at my T500 - its possible there where ThinkVantage * updates before.
I wouldn't like to tell what I've already tried to don't fix your thinking direction. I uses passwords for entering BIOS, boot up the machine, every of the two sata devices (replaced optical drive) so I now will be asked to enter three passwords before windows starts. To log on windows the fingerprint reader workes fine also for using ThinkVantage password application.
What information else do you need to give me a hint what to do/try.
Regards
  Ronny

hey rseffner,
uninstall the password and fingerprint software.
see if it still ask you for three passwords.
then go to our support site via http://support.lenovo.com , download the latest password and fingerprint software and install it.
try again
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Similar Messages

  • HT1222 hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

    hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

    I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.

  • My ipod touch in not working anymore how could I save it before doing a resature

    my ipod touch in not working anymore how could I save it before doing a restaure

    Restart, reset, restore are the basics from the manual.  Try each of them.

  • Logon to system is not working in ChaRM solman 7.1sp2

    Hello,
    I have configured Urgent change in solman 7.1sp2 version.
    Logon to system is not working in Landscape bar.
    Please help on this.
    Regards,
    Karthik

    No authorization issue. Using the RFC's i am able to logon to satellite system.
    In Solman 7.1 ChaRM , Creation of Request for Change(Rfc) in CRM Web Client UI Interface.
    So they removed Logon action in SMHF, added in Landscape Block in portal page.
    Both Logon to system(Landscape Block) and Maintenance cycle (Related Transcation block) not able to open.
    It doesn't show any error in trace.
    I have created the SAP ticket for the same.
    Rg,
    Karthik

  • TV does not work anymore on Qosmio G10

    Good morning,
    TV does not work anymore, may be due to an update. It has been working OK before.
    When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
    -Intervideo WinDVD creator is installed.
    -TV PCI tuner seems to work properly (as per hardware status)
    Which files can be missing? What needs to be done?
    Any help, suggestions, well appreciated.
    Thank you to anyone answering this message.

    Hello Luciano
    Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
    Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
    Try it at first.

  • After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

    Hi,
    I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
    First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
    So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
    As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
    Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
    Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
    I have no clue whats going on here because email and web is working fine.
    In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
    If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
    Is there anyone who could help me out here?
    Thanks,
    Daniel

    Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

  • Mac os 10.4.10 software update problem -- my mac does not work anymore :(

    hello!
    i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
    when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
    i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
    My mac problems' driving me crazy!!!

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695

  • Select end (Shift+End) in Dreamweaver (MAC) not working anymore

    Hi all,
    all of a sudden it seems that my DreamWeaver shortcut Shift+End is not working anymore to select text till the end of the line. Shift+Home is still working. I'm pretty sure I've been using it till the day before yesterday. I noticed the shortcut not working on my macbook yesterday, but since that was a clean install I thought that might have been the issue. But today I noticed the same on my working station which has been installed for a couple of days now.
    Is anyone else facing this problem? I tried re-adding the shortcut, but that doesn't work at all..
    Joshua

    Seemed to have fixed itself.. all of a sudden it is working again..    

  • APEX2.0 on 9i not working anymore after installation of 10G database

    Hello,
    Up to last saturday I used APEX 2.0 on my 9i database (on Windows XP) without problems. I have several applications running and used them saturday for the last time.
    Saturday I installed Oracle 10G Enterprise Edition on that same machine. I installed ONLY the software for the RDBMS, not even APEX. Later on I created my first 10g database via DBCA. Notice that I didn't do anything with APEX on that 10g database yet. I only installed the RDBMS software in a 10g home directory and created a database. That's all. No apex installed, nothing from the companion CD, only the RDBMS software in its own home.
    Yesterday however, after a reboot of the machine, I could not use my applications running on the 9i database anymore: "the page cannot be found".
    HELP!!!
    What was changed by the installation of 10g that now causes that my applications cannot be accessed anymore? The 9i database runs OK, so that's not the problem.
    I did already change the PATH settings, so that the 9i paths are checked before the 10.2 paths, but that did not solve the problem.
    Has the installation changed something in the registry of XP perhaps?
    Best regards,
    Jan.
    Best regards,
    Jan.

    Hi all, in answer to the above suggestions:
    No the 10g database and listener is completely down (no services belonging to the new 10g database are running). I checked also alle the logs, but no messages anymore since saturday.
    What I did notice: Oracle92HTTPserver (a service normally started automatically) does not start. When I start it, it gives me a message that there is nothing to do and that the service therefore is not started. So the HTTP-server itself is not working anymore. I can't find any files changed by th installation in the Ora92 home Apache directories. All seems as it was before the installation And still it won't start....
    Does anybody have other suggestions? Please help.
    Thanks in advance,
    Jan.

  • After ugrade of my 2007 MacBook to OS X 10.6.8 my printers do not work anymore. Details see below any idea to solve issue? Thx Stefan

    After ugrade of my 2007 MacBook to OS X 10.6.8 my printers do not work anymore, error code: "cgdpdftoraster: cupsRasterInterpretPPD had an error: unknown operator "Statusdict"!". Any idea how to solve this issue? Thx Stefan

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • Encore CS6 does not start / freezes - Message: Encore does not work anymore (Win 8.1)

    Hello,
    Encore CS6 does not work. When I launch the Programm a message appears "Encore does not work anymore" and I can only choose close or debug.
    How can I solve this error?
    By the way it is really early to stop the development of an DVD authoring software!
    Thanks
    Michael

    Did EncoreCS6 work at one time, or is this a new install and it has never worked? If it worked before... what changed?
    With Windows, an update will OFTEN/SOMETIMES cause a problem with the graphics adapter driver
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • Why my bluetooth does not work anymore?

    Why my bluetooth does not work anymore? What can I do?  Before I just turn on bluetooth then turn off it, and it worked properly. Now it does not work. I don't understand why.......

    Works fine for me.
    What exactly is it not doing?

  • Upgrade z1 to 4.4.4 accelerometer does not work anymore

    Hi
    After upgrading my Sony Xpera Z1 to Android 4.4.4 the App "Moves" (Protogeo) does not work anymore!
    It says: Tracking error, accelerometer does not work!
    This work fine before!
    See sceen shot attached.

    the compass does not work anymore also...
    Using AndroSensor the following is waiting for an Event:
    Accelerometer
    Gravity
    Gyroscope....
    something is wrong!

  • My email is changed on my apple id and now some apps do not work anymore incl icloud. What to do

    My email address changed so altered it in apple id. However now some apps do not work anymore. And my email there seems not changeable
    I.e appstore, icloud, search friends etc
    Thx for yr help

    Hi frisbo1312
    I am in the UK and eventually found the problem was due to my BT Home Hub Router.  Not sure where you live, but of you are in the UK, this might work for you.
    I found this fix below on https://discussions.apple.com/thread/4604180?start=15&tstart=0
    It worked for me.  If you can't link to the URL, here is the body of the text
    There's an issue related to the BT homehub that is providing a hostname that is "syntactically incorrect" for several smtp server.
    Here's how you can fix it.
    Using your internet browser, go to the address "192.168.1.254
    - Follow instructions to reset your password if asked.
    - Then go to "Settings", then "Advanced Settings" and "home network"
    You will see there all the devices that are connected or that has been connected before. It's gonna be easyer if yout computer is the only one connected.
    Your computer should have a name like "unknown-xx:xx:xx:xx:xx ...
    Click on this name, chose another name without any special characters, like "macbook" for exemple.
    And then click on "apply"
    - restart your computer.
    That should fix the issue.
    Credit goes to vincentfromcork for providing me with the solution.
    Spread the word

Maybe you are looking for