Fingerprint power on

Hello,
When I try to use the fingerprint reader as an alternative to the power on button to start up the laptop, it works, but the physical power button still starts up the laptop. Furthermore, when I am in the log in screen, the fingerprint scan works as a password, but there is still a field to enter the written password.
I want to be able to disable the physical power on and the password field altogether when I'm using it with the finger print reader. Does anyone know how to do this?
My model is the x230 and I'm using Windows 8.
Thank you!

http://www.thinkscopes.com/thinkpad-t430u-fingerprint-reader-has-no-one-swipe-power-on/#more-1850
The power button can't be disabled, unless you physically break it.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

T440p Fingerprint power-on is not working

Hi , i just recieved my new T440p , Fingerprint @ power-on is not working although all config. is done typically in lenovo fingerprint manager pro & fingerprint security settings in the BIOS , i start my laptop it goes through windows normal startup & logon without any request for fingerprint .
Solved!
Go to Solution.

Dear Ahmad
Welcome in lenovo community
Have you tried to first to enroll your fingers first , an application called Lenovo Think Vantage should be installed .
Do you have this application installed ?
Also you need to check the device manager , it's better to send us a screen shot of it .
Let us know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Fingerprint instead of power on password not working any more

Hi,
my current configuration is T530i model 2392.
I recently updated BIOS to version 2.52 from 12. Feb. 2013 and of course some other software especially solid state drive firmware Version FWSS28 from 14. Feb 2013.
In BIOS Predesktop Authentication is enabled in addition with harddisk password and power on password.
Now to my problem:
before updating I software I could start with only swiping my finger over fingerprint sensor, without providing any kinde of password for harddisk or power on password. I received information about success & windows 7 (64 bit) was booting.
Now I need to provide power on password all the time, seems that fingerprint or BIOS now has a bug ?!
I did several things like:
disabling every password request in BIOS rebooting...
disabling deleting fingerprints on laptop and rebooting...
unchecked all necessary settings in fingerprint security software like SSO, power-on-password, fingerprint sensor should replace power on / hard disk password..... reboooting...
- then enabled everything again which I unchecked before.... rebooting....
Nothing has worked so far, so there it seems to be a bug in predesktop authentication...
Could you please advice or provide a fix ?
Rgds
Oliver
Solved!
Go to Solution.

Hi,
here short terms how I fixed it:
- opened fingerprint program & disabled everything which is of concern for authenticating with fingerprint
- deleted fingerprint with that software too
- disabled biometric device with windows tools
- deleted TPM with tpm.msc
- removed everything from BIOS regarding fingerprint, password for booting, hdd, etc
- resetted fingerprint with bios too
- loaded bios setup default (cause it was a BIOS update)
- shut down computer
- startup again and set everything in BIOS which is needed and has been disabled before
- did the same in windows (enabled everything again)
- rebootet.... prayed... computer prompts with "fingerprint matched" ==> first YEAH
- provided boot up password once....
- shutdown again....
- started with enrolling fingerprint only.... no prompt for password any more.... second YEAH
DONE

Bit locker drive encryption failed due to power failer and hard disk corrupted

I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Installation problem on Power PC G3, 450MHz OS 9.2 trying to install OS10.4

When I try to install, I get the dialog box: Mac OSX cannot be installed on this computer. Please consult the documentation for the list of supported computers. From what I can tell, I should be able to install on this computer; it appears on the list. In the System's Profile it says: FireWire 2.8.6: no device on this bus. Is that the problem? Can I do something to update the computer so it will accept the OSX? If I have to do a clean install, could someone please tell me how to do it?
Thank you in advance.
iMac Power PC G3 450MHz Mac OS 9.2.x trying to update daughter's computer

Thanks for the info. It looks like that is the answer to the problem but it'll be a while before I can do the Firmware update I think. The computer I'm trying to update isn't on line yet (it's been moved from one room that was wired to one that isn't, so now I have to get an Airport card and adaptor for it - which is obsolete, I've got to check out eBay for it. It just keeps getting more fun! Kind of like "If you give a mouse a cookie..." Although, I suppose I could download it on the the main computer and then burn it to a disc and then install it on the other iMac. New question: will that work?
At this point, it appears your answer is helpful and will solve the problem. Thanks!

Mid 2010 no USB Mouse or keyboard power? HELP!!

I bought a mid 2010 Mac Pro 2.8ghz Nahalem from the apple store over 1 month ago. After two weeks I had a five minute issue where after I rebooted, the mouse & keyboard would not respond. One quick reboot, the mouse and keyboard had power. Now I have a TV show I have to get to the station for tomorrow and I"m having this issue again and I've rebooted five times with no luck. I"m desperate here and I need to get this working. I did buy some new RAM from the Apple store, 4GB DDR3 PC3 240 pin 512MX72-8500 ECC. I put it in with the other three 1 gig sticks for 7gigs of RAM. Rebooted, no keyboard or mouse power. shut down, re-arranged the sticks in various configurations and even went back to just the three 1 gig sticks and again, the computer will boot up, get to the login window, but no power to the keyboard or my wireless mouse or should I say not responding and no caps lock light at all. Can I not have this RAM configuration and it blew something out? The bluetooth mouse battery was changed and I checked my keyboard which has a wired connection. It is fine. I even moved it to other USB slots. No go. Has anyone experienced this? Is there a PMU reset switch on these new mac models? I've been editing forever on a dual 1.6gh PowerMac with no problems. Rock solid. Now I'm on this Nahalem and this no keyboard or wireless mouse communication is killing me with this deadline. I NEED HELP!!!

After installing Windows 7 did you also install the Chipset Driver, Intel ME Driver, Keyboard and Mouse Driver and the USB 3 Driver? If you didn't then that would account for the various hardware items not being recognized. Always install the Intel Drivers first and then the rest.
The link below is for the available drivers from Lenovo for your model. Just select your operating system in the top box for the correct driver listing.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/leno...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

I had an Intel-iMac fried by lightening. UPS, surge protectors but it happened as I was reaching to unplug. Cold now. Could it just be the power supply? Can I replace that myself?

This is the full question since I couldn't get it all in the box.
I have some complex questions regarding an iMac, a Time-Machine backup, and iTunes on an iPod.
I live about halfway up an extinct volcano about 12 miles north of San Jose Costa Rica. Some months ago, we had a thunderstorm and as I reached to unplug my computers lightening struck about 50 meters from my house. I had an iMac with a 3-Tb external backup drive, a PC laptop and a laser printer on the same power strip. There was a definite surge and the light brighten and then power was lost for a few minutes.
When power was restored, the PC and the laser printer seemed to work fine but the iMac was cold.
First questions: Is is possible that the power supply was fried and not other essential parts? Would it be worthwhile to replace the power supply? Can I, with limited experience and tools do it or need I take it to a technician? My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk.
Next question: Do I need to replace the hard-drive before taking it for service? How hard is that, can I do it? I have seen videos of the drive replacement on-line.
Those are my iMac questions, now the questions about backup restoration.
If there is a saving grace with this it is that the Time-Machine backup seems fine although I have only accessed the data through Finder. I replaced the iMac with a Macbook Air with significantly less mass storage and I can't just move files to the Macbook. My problem is that I have an iTunes library of some 10,000 songs on the backup and until recently on a 160 Gb iPod which was old and it crashed. I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that. Can anyone tell me how I might do that or give me any insight into the process?
Thanks for any help you can give.

Is is possible that the power supply was fried and not other essential parts? Would it be worthwhile to replace the power supply? Can I, with limited experience and tools do it or need I take it to a technician? My concern is that if the hard-drive is good, there is personal information on it that I don't want to risk
Quite possible, but working on iMacs is not easy, & PSU might be prohibitive.
Hopefully the Drive might have info on it, but even pulling that out can be a chore.
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
I have replaced the iPod but have not tried to restore the iTunes library to it because of my confusion about how to do that. Can anyone tell me how I might do that or give me any insight into the process?
I'd get an external drive & restore the whole works to it, then boot from the External drive.

Power view in SharePoint - Changing the default save location?

Is it possible to change the default location when saving Power view back into SharePoint?
Our users are creating their own power view reports by clicking a power view shared data source in SharePoint document library.
When saving their reports, the default location is always the same location where the data source is. This is described here also:
https://support.office.microsoft.com/en-us/article/Power-View-in-SharePoint-Server-Create-save-and-print-reports-f616575e-02bf-46cd-b94a-b744245ef9d1?CorrelationId=a852221e-b063-4020-a20a-53d8e8fb8b8b&ui=en-US&rs=en-US&ad=US
Quote from the link: "The first time you save the
report, the default location will be the folder where the model is located."
Ok, understood. But is it possible to change this???

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

DonM. wrote:
Hi
Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
Cheers. Don
No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac or an Apple refurbished iMac to save money.

How do I print just the text in a power point opened in preview

How do I print just the text in a power point opened in preview

In the front panel, right click on the listbox object and select create>attribute node.
In the diagram click on the attribute node and select "Item Names".
Connect the desired array of string to the attribute node.
BigBen

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?

Hello, and welcome to Apple Support Communities!
Try entering four zeroes.

HT1384 My lock screen/power button on my iPod Touch is broken, and I need some assistance.

As the title suggests, I can not use the lock screen/power button on my iPod Touch, it is broken. I can use Adaptive Touch to turn the screen on and off at will, and also turn my device off. But if I turn it off, I don't know how to get it to turn back on. Could I just plug it into a charger and turn it back on, or would I need to plug it into my computer? Please help, in a few days I won't have access to it for 9 weeks, I need immediate help.

If you power off the iPod, it will turn back on if you connect it to a charger like a wall charger or a computer. I just checked with a charging source to confirm. I knew it did it with a computer.

HT2477 I have a new MacBook Pro which has Windows 7 installed so I have only ever used it as a PC, I would like to use the apple system but was never shown how to do this and I cannot even work out how to switch it on . If I just press power iI get wind

I switch the power on on my MacBook Pro I get windows7
this is no problem but I love my IPad and would like to use the apple system on my MacBook .
CAn anyone tell me which keys I press to change from windows 7 to Apple most articles I have read tell you it is easy but not one says "firstly press x then press y and when you see c press v so I no idea how to do it,
I am well educated but I am 75 so I do not understand the jargon but I am fairly good at using computers and I do like the app system.
I Would be very pleased if someone can advise me
best regards
TOm

Reboot, hold the option key down as soon as you hear the chime. When the Boot Manager appears select OSX instead of Windows.

Fingerprin​t power on

Similar Messages

Maybe you are looking for

Fingerprint power on