Fingerprint reader doesnot start automatically after updating system

After updating my T60 XPPro Fingerprint login requires 3finger compination + pressing enter before I ican wipe my finger. How can I switch back to original setup, where only finger wiping was enough to login?

Dear All,
My problem was solved at the authorized Apple care, My MBP was outside warranty, as it is a manufacturing defect Apple replaced the Logic Board for free.
Great Service and Kudos to Apple to accept and repair the issue without charging the customer's any penny.
With this similar issue, I recommend every one to visit the Apple care and get it resolved for free.

Similar Messages

My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately. This started happening after updating to the latest version of Ipod software.

My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately. This started happening after updating to the latest version of Ipod software.

Here's a couple things to try:
1. Reset the iPod by holding the sleep/wake button and home button at the same time for 10-15 seconds until the Apple logo appears on the screen.
2. Uninstall and reinstall one of your purchased apps. Sometimes this can rectify the issue.
3. Connect the iPod to iTunes and restore it. New system software usually resolves the issue. Make sure you sync before restoring because a restore removes the data from your iPod.
Hope one of these works for you!

Will DB start automatically after rebooting the computer?

Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

My iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

my iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

I am having the same issues--just got off phone with customer service rep--was told that my phone is in recoveyr mode and that I would have to restore it, however, the only things that would be restored would be from my last backup which was in November 2013! I was also told that apple users should not update as soon as the update is available (so why are they sending it to us if they're not sure that there will be any problems!!!). I can't restore now since I am in work--will do it when I go home tonight. In the meantime, I am without a working iphone for the day! This is horrible--I see I'm not the only one who has experienced this!

Why Portage R700-15P starts automatically after hibernation

Why TOSHIBA Portage R700-15P starts automatically after I hibernate it (or put on sleep) and close the lid?
As soon as I take hibernated laptop with closed lid in my hands to put it into bag - it starts by itself with closed lid...
Had anybody similar issue and solution for this?
Thanks

> Is there any setting for laptop or Windows 7 that does not resumes laptop from hibernate/sleep state when lid is closed?
First of all its not matter if the lid is closed or not one fact is important: notebook is set in hibernation mode and wakes up if USB mouse would be moved
Fact is that BIOS contains some Wake Up options you should check the BIOS settings like Wake Up on LAN, Wake up on keyboard etc disable these options, save the changes and check how it works

Option that SAP starts automaticly after power loss

I am using an windows/sql ECC 6.0 server. I would like option that SAP starts automaticly after power loss. Is it possible and how?

Hi
I think this not possible.
Thanks
Pankaj Kumar

X does not start automatically after xorg update (1.16)

Hello,
Yesterday after a system update and a reboot, my screen stayed desperatly black. Then I logged in to a console as root and started X by doing:
systemctl isolate multi-user.target
systemctl isolate graphical.target
This means root can start X. So I created the file /etc/X11/Xwrapper.config:
allowed_users = anybody
needs_root_rights = yes
but no change. I'm using the Intel GPU (xf86-video-intel driver).
Any idea?
Last edited by zorggy (2014-07-30 06:50:46)

Oops, I did not search enough in the journal. Here is what looks like a bug:
Jul 30 10:12:09 xxx kernel: ------------[ cut here ]------------
Jul 30 10:12:09 xxx kernel: WARNING: CPU: 2 PID: 343 at drivers/gpu/drm/i915/intel_display.c:860 intel_wait_for_pipe_off+0x1a6/0x1b0 [i915]()
Jul 30 10:12:09 xxx kernel: pipe_off wait timed out
Jul 30 10:12:09 xxx kernel: Modules linked in: hid_generic snd_usb_audio usbhid snd_usbmidi_lib snd_rawmidi hid snd_seq_device tpm_infineon ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 coretemp hwmon xt_conntrack nf_conntrack iptable_filter ip_tables
Jul 30 10:12:09 xxx kernel: nfs lockd sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif crct10dif_common cdrom atkbd libps2 ahci libahci libata ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
Jul 30 10:12:09 xxx kernel: CPU: 2 PID: 343 Comm: Xorg.bin Not tainted 3.15.7-1-ARCH #1
Jul 30 10:12:09 xxx kernel: Hardware name: Hewlett-Packard HP Compaq Elite 8300 CMT/3396, BIOS K01 v02.05 05/07/2012
Jul 30 10:12:09 xxx kernel: 0000000000000000 00000000900babe8 ffff880211fafa38 ffffffff8150880e
Jul 30 10:12:09 xxx kernel: ffff880211fafa80 ffff880211fafa70 ffffffff81069b2d ffff88020f0ac000
Jul 30 10:12:09 xxx kernel: 0000000000070008 00000000fffea31e 0000000000000000 ffff88020d530b48
Jul 30 10:12:09 xxx kernel: Call Trace:
Jul 30 10:12:09 xxx kernel: [<ffffffff8150880e>] dump_stack+0x4d/0x6f
Jul 30 10:12:09 xxx kernel: [<ffffffff81069b2d>] warn_slowpath_common+0x7d/0xa0
Jul 30 10:12:09 xxx kernel: [<ffffffff81069bac>] warn_slowpath_fmt+0x5c/0x80
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e64b6>] intel_wait_for_pipe_off+0x1a6/0x1b0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e656b>] intel_disable_pipe+0xab/0xc0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06e7814>] ironlake_crtc_disable+0xe4/0xa00 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06eeac7>] __intel_set_mode+0x287/0x16b0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffff81077bc4>] ? mod_timer+0x114/0x250
Jul 30 10:12:09 xxx kernel: [<ffffffffa06f2686>] intel_set_mode+0x16/0x30 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa06f3740>] intel_crtc_set_config+0xa90/0xde0 [i915]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05dbe71>] drm_mode_set_config_internal+0x61/0xf0 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05df40b>] drm_mode_setcrtc+0x2ab/0x620 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffffa05cfb9f>] drm_ioctl+0x1df/0x680 [drm]
Jul 30 10:12:09 xxx kernel: [<ffffffff811c7b10>] do_vfs_ioctl+0x2d0/0x4b0
Jul 30 10:12:09 xxx kernel: [<ffffffff811d221e>] ? __fget+0x6e/0xb0
Jul 30 10:12:09 xxx kernel: [<ffffffff811c7d71>] SyS_ioctl+0x81/0xa0
Jul 30 10:12:09 xxx kernel: [<ffffffff815165a9>] system_call_fastpath+0x16/0x1b
Jul 30 10:12:09 xxx kernel: ---[ end trace 614c784f88b552da ]---
I have another computer running the same driver which succeeded the xorg update. So now I don't know what to do. Re-installing the driver? What package is it exactly?

Some Systems Restarted Automatically after Updates Deployment with Restart Suppressed

I've searched the forum and multiple blogs - but, I'm still confused about what is causing some of our workstations to restart after applying a software updates deployment.
I deployed the Dec 2013 Patch Tuesday updates to a collection of workstations. The deployment was set to:
Not allow restarts outside of a maintenance window (box is unchecked)
Suppress restarts on workstations (box is checked).
There is no maintenance window defined for any of our workstations
On all the workstations, the HKEY_LOCAL_MACHINE\Software\...\WindowsUpdate\ values are:
WUServer: http address of our SCCM SUP server
WUStatusServer: http address of our SCCM SUP server
Also, the key in HKEY_LOCAL_MACHINE\...\WindowsUPDATE\AU is:
UseWUServer: 1 (which I understand disables the use of the automatic Windows update service)
Some set of workstations automatically restarted shortly after 3:00 am the next morning. Clearly that's the Windows Update Agent jumping in a restarting the systems. However, I don't understand why it would do that. I really don't understand why it would
have occurred on only some of the workstations while others are still waiting for users to manually restart 36 hours later.
All of the workstations are in the same active directory OU - so the same set of GPOs applies to all.
Note: none of the registry keys were set directly in any GPOs - I assume the values were set by the SCCM client.
Any assistance would be appreciated.
Larry

depending on the OS version, this could be relevant:
http://blogs.technet.com/b/wsus/archive/2013/06/11/wsus-blog-managing-updates-with-deadlines-in-an-era-of-automatic-maintenance.aspx
http://blogs.technet.com/b/wsus/archive/2013/10/08/enabling-a-more-predictable-windows-update-experience-for-windows-8-and-windows-server-2012-kb-2885694.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Need Database to be started automatically after restarting the system

I m using oracle 8.1.6 on windows 2000. My company wants me to automate the database i.e whenever the system is restarted then the database should also start automatically.
Do any one have any solution for this?....

Action :
Begin by logging on as Administrator. This will give you access to all the Services available in Windows 2000. To load the Services Utility, click on Start, Settings, Control Panel, Administrative Tools, then Services (You may also be able to access it via Start, Programs, Administrative Tools, Services if you enabled Administrative Tools to be displayed on the Start Menu).
Then double click on OracleService<sid> and change the startup type to Auto.
Mudassir

Reader will not automatically install updates on Windows 7

I have looked through the forums and have not seen this exact symptom mentioned:
"Automatically install updates" does not seem to work correctly on Windows 7. The updates download and I see the "update is ready to install" bubble in the system tray repeatedly. However, the updates never seem to install. I've seen this on more than one Windows 7 machine (it works ok on XP). I suppose this could be something particular to our environment, but I'm at a bit of a loss as to where to look next. Leaving the system "idle" does not seem to help and the behavior does persist after a reboot.
(I'm running Process Monitor right now and see AdobeARM.exe occasionally and successfully creating and exiting a thread, but not touching any files or registry entries.)
I enabled this setting via the registry -
[HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe ARM\1.0\ARM]
"iCheck"=dword:00000003
- and can see in the GUI that it has taken effect.
I do see some files in this directory - does this look correct?
C:\Users\All Users\Adobe\Reader\9.3\ARM>dir /s
Volume in drive C has no label.
Volume Serial Number is 8EC5-7A43
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM
07/07/2010 08:00 AM <DIR> .
07/07/2010 08:00 AM <DIR> ..
07/07/2010 08:00 AM <DIR> 19872
07/06/2010 08:05 AM <DIR> 882
06/20/2010 04:01 AM 8,040,960 AdbeRdrUpd933_all_incr.msp
07/07/2010 08:00 AM 368,779 AdobeARM.bin
06/09/2010 04:06 AM 385,536 ARM.msi
06/23/2010 07:45 AM 28,160 Reader9Manifest.msi
 4 File(s) 8,823,435 bytes
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM\19872
07/07/2010 08:00 AM <DIR> .
07/07/2010 08:00 AM <DIR> ..
06/09/2010 04:06 AM 331,176 AcrobatUpdater.exe
06/09/2010 04:06 AM 976,832 AdobeARM.exe
06/09/2010 04:06 AM 70,584 AdobeExtractFiles.dll
06/09/2010 04:06 AM 331,176 ReaderUpdater.exe
 4 File(s) 1,709,768 bytes
Directory of C:\Users\All Users\Adobe\Reader\9.3\ARM\882
07/06/2010 08:05 AM <DIR> .
07/06/2010 08:05 AM <DIR> ..
06/09/2010 04:06 AM 331,176 AcrobatUpdater.exe
06/09/2010 04:06 AM 976,832 AdobeARM.exe
06/09/2010 04:06 AM 70,584 AdobeExtractFiles.dll
06/09/2010 04:06 AM 331,176 ReaderUpdater.exe
 4 File(s) 1,709,768 bytes
 Total Files Listed:
 12 File(s) 12,242,971 bytes
Any suggestions appreciated. Thanks - Andy

Some additional information. I'm seeing "GetLastError(): 0x2 - The system cannot find the file specified" in c:\users\(me)\appdata\local\temp\AdobeARM.log. But even using Process Monitor, it's not clear to me which file cannot be found.
Still seems to me that updater is downloading the update but never trying to apply it. The most recent thing I have tried is to quit AdobeARM gracefully and restart it. That does seem to have reduced the number of subdirectories in C:\ProgramData\Adobe\Reader\9.3\ARM\ to only one (previously there had been one subdirectory per run).
Thanks for any suggestions -
[2010-07-09 08:08:50] C:\ProgramData\Adobe\Reader\9.3\ARM\
[2010-07-09 08:08:50] GetLastError(): 0x91 - The directory is not empty.
[2010-07-09 08:08:50] ARM returns ERROR_SUCCESS
[2010-07-09 08:08:50] Adobe ARM 1.1.7.0 logging finished.
[2010-07-09 08:10:38] Adobe ARM 1.1.7.0 logging started.
[2010-07-09 08:10:38] Command Line:
[2010-07-09 08:10:38] GetFileVersion(): C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
[2010-07-09 08:10:38] File version: 9.3
[2010-07-09 08:10:38] Build number: 2
[2010-07-09 08:10:38] Revision number: 163
[2010-07-09 08:10:38] ProductCode: {AC76BA86-7AD7-1033-7B44-A93000000001}
[2010-07-09 08:10:38] ProductName: Adobe Reader 9.3.2
[2010-07-09 08:10:38] ProductVersion: 9.3.2
[2010-07-09 08:10:38] ProductRegistry: SOFTWARE\Adobe\Acrobat Reader\9.0
[2010-07-09 08:10:38] ProductInstallDir: C:\Program Files\Adobe\Reader 9.0\
[2010-07-09 08:10:38] Found preference AUTO_ALL.
[2010-07-09 08:10:39] ArmUpdate record found.
[2010-07-09 08:10:39] GetFileVersion(): C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe
[2010-07-09 08:10:39] File version: 1.1
[2010-07-09 08:10:39] Build number: 7
[2010-07-09 08:10:39] Revision number: 0
[2010-07-09 08:10:39] New file object: AdbeRdrUpd933_all_incr.msp
[2010-07-09 08:11:08] C:\ProgramData\Adobe\Reader\9.3\ARM\29139
[2010-07-09 08:11:08] GetLastError(): 0x2 - The system cannot find the file specified.
[2010-07-09 08:11:08] Updated time stamps for 4 files

W540 fingerprint reader wont start during windows logon

Greetings to all fellow thinkpad owners,
As the title indicates, i have an issue with my w540's fingerprint function.
My laptop is relatively new ~2 weeks old and as i am on vacation i boot it every 2-3 days just to mess with it.
few days ago i noticed that the fingerprint wont always start in the first boot and wont work in windows log on, however it will work if i lock/sleep the laptop.
some times it would work some other times it wouldnt. now i tried re-installing the driver and now FP doesnt appear at all in the logon.
i also noticed that the fingerprint software made the laptop a bit slower during the windows startup. now that i have removed it the password area appears almost immediately during the logon process.
things i have tried so far:
1) all drivers are up to date
2) removed all registered fingerprints, deleted the driver and the FP manager pro
3) installed the FPmanager pro from the lenovo update system and registered new fingerprints
4) i only have 1 admin account on windows and the all options are ticked in the FPmanager pro also in biometric settings its ticked to allow users to use FP to log on.
5) waited for 2-3 minutes in the password area, only the FP led open, but it wouldnt work
the issues persists. FP wont appear on logon but only after sleep/lock.
my software specifications:
win7 x64 pro
antivir
latests windows updates
lenovo software not installed: password manager, quick control
and nothing crazy installed apart from steam for games and windows office.
is this a hardware problem or something that windows 7 are causing?
thank you for your time and thank you in advance for any reply
kind regards,

I attempted to reset the policy settings of CSS but then the pop up screen just got stuck:
- I did a reboot and reset the fingerprint data and password (after exporting the
settings),
- uninstalled the fingerprint reader and CSS
- uninstalled the CSS. I had encountered some issues while uninstalling it
Windows is reporting that the installation log file could not be found. I manually
downloaded the driver from the site and used the installer to remove it from my PC
- Reinstalled both CSS and Fingerprint driver
- Import all my security settings (password and fingerprint)
- Tested CSS and used fingerprint as default login method in battery mode
- Enabled Single SignIn method in CSS and BIOS
So far so good, the reinstallation fixed the issue. I did recall that there was a windows update before this mayhem on the fingerprint reader started.

Messaging Server/UNIX: Starts automatically after installation

How can I configure Messaging Server to run automatically on startup?

In most cases, Messaging Server for UNIX will run at startup automatically.

Most UNIX systems have a start script that includes a line that starts sendmail
as a server (/usr/lib/sendmail -bd) automatically.
Howver, when Messaging Server is installed, it replaces several mail utilities (mailq,
processq, and sendmail), with links to our sendmail binary
(<ServerRoot>/bin/msg/admin/bin/sendmail).
Therefore, Messaging Server, rather than sendmail, starts when
your system starts.

This can be confusing to administrators of other Netscape servers since
most other Netscape servers are not installed to start automatically.

Note:

This does not take effect until the system is fully restarted. After
installing Messaging Server, restart the system before attempting to start
Messaging Server. Sendmail is usually already running, and the installer does
not kill the sendmail process.

If you start Messaging Server without
restarting, smtpd will not start due to a port conflict.

Hi Leo, thank you for your help
This:
I have tried the suggestion above (clear the "Run task as soon as possible after a scheduled start is missed" checkbox) and it does the trick for me. However on the Home/Get Started/Set up screen the "Set up Server Backup" task is then reset to outstanding
while the .../Quick Status screen shows "Server Backup ON".
Is a working work around till a real update or hotfix is released

Hyper-V - virtual machines don't start automatically after power outage

Hi,
I have a HP server running Windows 2012 R2 + Hyper-V. On this server, four VM have Windows Server 2003 R2, and one VM has Windows 2012. After power outage, 1 2003 R2 VM and 1 2012 VM are started properly, but the other three machines aren't. I've started
it manually. All VM's have last version of Hyper-V integration tools installed, the option "Automatically start VM if it was running before the service was stopped" was chosen. I'm not very familiar with Hyper-V, so, I've investigated only Hyper-V-VMMS
event log. There are some recurring errors:
The Integration Services Setup Disk image could not be updated: The process cannot access the file because it is being used by another process. (0x80070020).
and
Failed to get the disk information.
But I think it isn't a clue.
How can I clarify, why these machines aren't started automatically?

Hi EugenBerend,
Maybe it is related to system resources allocation during the start up .
I would suggest you to configure a startup delay for those lower priority machines so that system
can locate enough resource for them.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

X240 fingerprint reader does not work after standby or lockscreen

Hello all,
I have a new X240, and the fingerprint logon no longer works after the computer resumes from standby or from a lockscreen (screen saver). I have checked other solutions here and in other sites, namely:
1. unchecking the power option of the fp reader in device manager,
2. and switching the 30-day standby in Lenovo Settings
Neither of those solutions have worked. I have the latest BIOS and FP driver versions. I made sure the the FP was enabled in BIOS, and I even switched the settings to allow internal FP reader only. Still, the FP will only work when I first power on the laptop, but not after resuming from stand-by. I have checked in Device Manager after manually entering the password, and it says that the FP is working properly.
I am at a loss, and I want to exhaust every possibility before I call tech suppport. Any suggestions would be appreciated.
X230
x200
T410
X240
TP Tablet 2
Solved!
Go to Solution.

Fixed.
I normally use System Update to check for newer versions of Lenovo software. SU didn't catch that there was a new version of FP reader. Just to be sure, I doublechecked on Lenovo's website, and lo and behold, there was a newer version of the FP reader. I had to download it and manually uninstall the previous version. It's fine now. However, I don't understand why Lenovo does this - why does SU not catch updates? It's not the first time that this happens, by the way, nor is it limited to this laptop (I own or have owned a T60, X61, X200, X201, X230, T410, and now the X240).
In any event, the FP is working properly now. I hope this helps someone else.
X230
x200
T410
X240
TP Tablet 2

Fingerprint reader doesnot start automatically after updating system

Similar Messages

Maybe you are looking for