Finished clips were dropped from sequence

Hi there...
I have been working on a project in Final Cut Express. I always Render All and Save before I close out. The last time I opened the application, some finished clips I had in my sequence were dropped. I did a search for them and found them listed in my Render Files folder as
Sequence 1 - FIN - 00000010
Sequence 1 - FIN - 00000011
Sequence 1 - FIN - 00000012
...and so on.
So, two questions -
(1) Why were these finished clips dropped from the sequence?
(2) How do I bring them back into the sequence?
Thank you so much for your feedback!
...Rae

Hi(Bonjour)!
Simply render your sequence again.
Sometimes, render files can disapears without explaination (FCE 2 was prone to this behavior).
Michel Boissonneault

Similar Messages

While working in iMovie, computer shut down and all imported clips from that project disappeared. The project still existed, with titles, but all video clips were gone from the movie as well as the computer library.

Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.

OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
I can't believe it destroyed like 8 hours of work!
I have a 15" mid 2011 MBP and Mavericks OS.

Multicam clips not dropping to sequence

I've created my multicam clips with all cameras I need. They are in sync and they work in Viewer. I went to start my edit and I can't drag my selection to the Sequence. It won't do it. I've selected different angles and it won't budge. There's no error or anything it just won't let me drag it down. Thanks for any help.
Working on FCP7 MBP Pro 2.33 2GB Memory

Use Option + drag from the viewer.

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

Premiere Pro Crashes "A serious error" when opening clips or playing from a sequence. How to fix?

My premiere Pro Crashes the moment I try to open a clip or play from a sequence.. basically I can't do anything. Please help!

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Insufficient content when cutting from sequence as individual clips

When cutting from one sequence into another, with an in point set on the source sequence and an in and out set on the program sequence, I get a "Insufficient Content for Edit" error.
This occurs when I have the "Insert and overwrite sequences as nests or individual clips" toggle deselected (so as to cut in the individual clips, not a nested sequence). If I select this toggle the edit works, but obviously as a nested sequence, which I do not want.
Is anyone else having this issue?

We are getting nested sequences whenever we try to cut in a sequence that is more than a minute or two long. We can't get it to cut in anything but a nest for longer clips and if the in/out points are in excess of four minutes, Premiere crashes.
Do you get the Image/cache error?
I have contacted Adobe customer service. They kept me on the line for an hour deleting my settings and playing around and never found a solution. So far all we can do is cut in little tiny bits at a time.
I wonder if your problem is similar, how much material are you trying to cut in?

One or more frames were dropped during playback???

I have finally complete my movie.... now when I play it back there are two clips which produce this error message:
"One or more frames were dropped during playback"
It tells me I can:
"Turn off unlimited RT" (which is off)
"lower compression data rate" (no idea what that is)
"Close open sequences" (but Im working with the only one open)
"lowering preference for real-time audio tracks" (??)
"increase speed of system..."
Any suggestions on an easy fix? The clips worked before... I think it was when I added a transition that they stopped working. I took out the transition but nothing changed. I even tried to delete the clips and recreate them from the original source saved on my comp. Thanks in advance!

Sounds like your drive is fast enough? Are you playing back rendered material or unrendered? Are you using Unlimited RT or Safe RT?

How can I save finished and shared movies from old iMovieHD-projects

Hi there, I have a big problem:
I have found some old iMovieHD 6 Projects. (.iMovieProject) that already have been finished years ago.
Now I would like to save the finished movies outside the projects but I can't find a way to do this although I've been searching in the www for hours.
When I go to the folder 'shared movies' I find a small .mov file - it's only some KB big.
I can start this and the movie plays with no problem im QuickTime Player 7, the quality ist quite ok - original films were .DV from a camcorder.
When I use iDVD I can take this movie without problems and burn it as DVD or .img on my hard disk.
In this .img I can find the folder VIDEO-TS where I can find the movie al .VOB. But the Quality is really awful.
How can I save the finished movie right out of the folder 'shared movies' in the best quality, maybe as .mov or other ?
I can't install iMovieHD 6.0.3 because my old iLive install-DVD was sold with my old macbook years ago and I don't know if it would work anyway on Mavericks 10.9.5
Now I have iMovie 10 and 11. Importing the old projects would not solve the problem because only the original clips were imported, not the project itself.
Would be QuickTime Pro a solution ? There are items like 'save as' or 'export' but I don't know if it works with this kind of files...

Save the clips as Quicktime files (full quality), then you can import them into later versions of iMovie. An iMovie 6 project would not be compatible with recent versions of iMovie.

Batch List: How to capture clips inc info, from disk instead of tape

We have a client's edit log on Excel, including reel no, in/out, scene, description, log note etc. Usually we import this batch list to FCP, then batch capture from DVCAM tapes, so all clips have all their info - great.
In this case, the material is already digitised and the client has logged from DVDs burned with timecode from the digitised material being placed in FCP sequencecs with timecode generator filter.
Is there a way to 'batch capture' clips from the digitised material, so that we keep all the client logging info, as we would if we were capturing from tape?

Shane has got it right - we want to automatically build a sequence using that batch list. Or somehow have FCP make new clips or subclips from already captured footage... so if your verdict is right Shane, looks like we may have to go the manual route...
although - just occurred to me - for each clip, I could go to the digitised source sequence, duplicate it, open copy in timeline, enter clip's in and out tc in the viewer - and that will give me a copy of each clip as a sequence - rename that sequence as per the clip, and we're done.
But it's still of course more laborious than batch capture from tape; this is a concern going forward as we are switching to XDCAM EX, so of course the route to enable this client-edit-logging ( http://www.creationvideo.co.uk/info/timecode/ ) that we've always offered clients is no longer valid as the material is already online....
Any suggestions still welcome!

My keywords and compound clips have disappeared from Event

Hi.
After a few weeks of working off of a portable hard drive, recently I hooked my laptop back up to my large external drive, where most of my video resides, and found that all my keywords and compound clips have disappeared from their Event. (I have only one event on that drive.)
This is DISTRESSING. I had originally imported a huge amount of clips into FCP X and spent days entering keywords. I also took a lot of time importing sequences from FCP 7 into FCP X as compound clips. These were important building blocks. Now they are all gone.
Looking on the web I've only found one instance of anyone saying this had happened to them, and it was because he had tried to duplicate his currentevent file in the file. I did no such thing. Really I have no idea what I could have done differently to make this happen. All I did was not use my primary hard drive for a few weeks.
Is there ANY way to retrieve all those keywords and compound clips? This is a NASTY surprise, a real blow. I walked around all night feeling depressed at all the lost work.
The other guy who had this problem said that he then used FCP 7 for a day -- and when he reopened FCP X all his keywords and clips had returned. He didn't know why. I tried leaving FCP 7 open all day today in case that would help, but there's no change this evening. Still all gone.
I then tried moving the currentevent file onto my desktop with a slightly changed name (--currentevent), renaming the file in the "backup" folder as currentevent, and opening with that. No better.

Go into the iCloud settings and make sure the calendar sync is on

Video Distortion when clip is dropped into timeline

My system: Windows 7 64 bit.
Intel Core I5-2500k [email protected] (4 CPUs)
Memory: 8 Gigs RAM
I am new to using Premiere Elements 10 as this is the first video editing program I have ever worked with however I am very computer literate.
Problem: I have numerous video clips I shot with my camera. I decided to make a project for the fist time using a bunch of clips I shot from a dog show. All of the clips that I shot were in the same format of AVC HD 24M (FX), 1920x1080 (60i). Most of the clips are a few mintues long but two were shot at max video time of 29 mintues (shot with a camera Sony DSC-HX100V). When I dropped these into the timeline and did the smart trim option the video had lighting issues such as flickering and the black images had static. NOTE: I have been successful in getting these two video clips to come out in great quality after trimming when I did this in a separate project by itself.
If I view the vidoes in the project are they play perfectly, its just when I drop them into timeline and trim them that I get the lower quality issues. I have about 20 vidoe clips in the timeline that before trimming are about an hour and a half. After trimming the movie is about 30 mintus. Every clip is great except the two that are longer in length.
Being a new user I am sure I must be doing something wrong. Please help.
Thanks,
Mike

Do you have a redline across the top of the timeline when you first import the clips?
If yes does it run -
the whole length of the timeline? If so you have chosen the wrong project setting.
only across some segments. If yes you are using mixed footage. Press [Enter] to render the redline clips. When done the redline clips will go green and you should get a smoother preview playback.
Note that the render is only to make previews smoother. You don't have to do it as, when you share the footage, the whole project will be rendered. Also note that as you apply effects to a clip it will show a redline across that clip and for smooth preview you should render ( Press [Enter] ).
Cheers,
Neale
Insanity is hereditary, you get it from your children

No audio heard from sequence during timeline playback

I am a new user to PPro CS 5.5, just opening my first project.
I have captured a few clips and brought them into the project. Previewing them in the source window, I see the video track play and hear the audio track.
I moved one of the clips onto the timeline and attempted to view it. I see the video playing but no audio is heard.
I opened the clip in Audition. the audio played there, no problem
I am sure there must be a configuration parameter to set but I cannot find it.
Can someone suggest where I can look?
Thank you

Examining the source window playback settings, I see that realtime Playback has no external device selected in the drop down and Desktop audio is selected with the button. External Device is grayed out.
With these settings, I hear the audio track.
Examining the editing window playback settings, I see something very different.
The menu box is titled Blackmagic playback settings.
The only option entry in the menu box is: a choiceto "Turn off Dropped frame Warning"
I have a Blackmagic Intensity Pro card installed on my PC and used it to capture my video clip on mini-DV tape played from my Sony GV-HD700 videocasette.
Why am I seeing this BM menu reference only on the editing window? Is this the indication of my problem?
I went back to defining another sequence and the menu choice opened with the same path, as my previous first time at this, to a Blackmagic selection. I changed to a HDV 1080i selection for this 2nd sequence. When I dropped the clip into the 2nd sequence, presto, the sound was there.
Now I am wondering what is the blackmagic option for?
What is the difference between the source and editing window parameters?
That is left to when I have more time to dig into it.
Thanks again

"these clips were left offline and not divided into separate clips"

After a Maxtor brand hard drive crash, I am trying to recapture footage that was lost. I am using the exact same tapes and source deck as I did originally. In the process of recapture, repeatedly, I get "Batch capture encountered timecode breaks in sequence items. To protect your edits, these clips were left offline and not divided into separate clips." The result is, after spending whatever the time for each clip to capture I get nothing.
How do I turn off whatever unnecessary protection mechanism is in place? How do I recapture my clips?

I've already tried both "create new clip" which created NO clip. The I tried "Warn After Capture" and it can't find the last second of video on the tape, so results in nothing.
I'm now into a new subject. I have created an EDL of the finished project and have tried to re-import that EDL into FCP for recapture. But every attempt to bring the EDL back in results in "Error Importing EDL" and I'm still screwed. Yes I have stripped the recapture information down to the most basic, cuts only, no effects, no filters EDL and it still won't work--I've made dozens of attempts. That may become another query on here: How do you make an EDL that will re-import into FCP? Stay tuned.

How do I get iTunes songs which were downloaded from external back-up drive to play on new computer and is there a way to get my play lists back?

When I try to play a song from my re-installed iTunes library, I get the error message: "Song xxx could not be played because original file could not be found. Would you like to locate it?" > "Locate" or "Cancel." When I click on "Locate" I can't figure out how to get the song to play from any of the places that were "located." The path is C:\users\Janet\libraries\music\iTunes
However, iTunes songs chosen from my library will play in iTunes (current version) when I have the external back-up drive plugged in! I recently copied my backed-up iTunes library from my external back-up drive to a new computer.
Most of the songs, but not all, magically appear in Windows Media Player and I can play those just fine.
I can see my iTunes library in the newest version of iTunes, recently downloaded to new computer, but can't play songs without connecting to the external back-up drive - so maybe there is something else on that external drive that needs to be on my C: drive?
I am using an HP Pavillion Notebook, Windows 7, 64-bit. My previous computer was Windows Vista. Before Vista, I had XP.
Back when I had XP, I wanted to purchase some songs to download to my computer. Because iTunes had the ability, I used it to create a massive library of songs, most of which were ripped from my CDs. I don't have an iPod and iTunes worked fine for creating playlists and then burning them to CDs.
Also, I'd like to know if there is a way to get back my playlists.
And another thing - in the older version of iTunes, there was a folder in the lists on the left-hand side of the screen where I could click to see all the songs I had purchased. I'd like to get that ability back if possible.
In hindsight, iTunes was probably not the best choice for me to build my music library in a Windows operating system, but it seemed to be the best choice at the time. I really wish I could convert all the songs to mp3 format.
I have been working with computers since the days of DOS, black and white screens, and no mice. The first computer I bought for my own use at home was a Mac and it had "Flying Toasters" as a screensaver. (I miss that screensaver.) It did not have a tower and I believe they called it a laptop, even though the thing was as big as a suitcase and probably weighed around 30 pounds. However, I am by no means a computer expert. In other words, pretend you're trying to tell your mother how to do what I am asking. =)
Many thanks in advance to anyone who can help me.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

All of my apps were deleted from my apple id

Somewhere between updating my phone, changing my gamecenter email and password, or transferring pictures from my phone to my computer, my apps were deleted from my apple id. I'm not talking about deleted from my phone, I mean from my apple id. I am 110% sure this is the same apple id that I purchased everything on.
It started with me trying to update 2 apps after getting done transferring pictures last night, and it wouldn't let me. I tried a bunch of solutions and none worked. I downloaded Spotify to my phone no problem, but still couldn't update Clash of Clans and Twitch. Then I went to updates>purchased>my name, and saw my only purchased app was spotify. I was confused because it was still my same apple id, I didn't log into a new one. Then I deleted twitch and clash of clans from my phone and was able to download them. I can use them no problem, but that's not really the problem. The problem is any app that is on my phone won't be able to update when an update comes out, which some of those apps I had purchased with my money.
Two or three days ago I had tried to update my phone from my computer, only to have it go into recovery mode. To make a long story short, the problem was the usb port on my computer, so I changed to another one and it updated fine. I figured that was the end of my problem, but I can't remember if I tried to update any apps since then (other than the 2 last night when I found out this problem).
Last night I changed my gamecenter email and password to the same email and password on my itunes account and icloud account (although I think itunes and icloud are the same thing but I'm not sure). No problems there, everything worked fine. Then later on I hooked my phone up to my computer and itunes told me something about this phone not being used with this computer before (it has definitely been used before). Then it told me to fill in my information, so I put in my address, state, zip. I didn't really think anything of it. After finishing with the pictures, I grabbed my phone and saw two updates (see paragraph 2 for what happened next).
I ended up just going to sleep last night to deal with it today. So today what I did was restored from the backup I did right after updating my phone a couple days ago. That did not fix my problem (I didn't think it would since even on my computer itunes is showing my only apps are the four that I downloaded today/last night (clash of clans, spotify, twitch, and alien blue)). The thing that angers me is when I go on itunes, click on the three dots on top left near music, movies, etc, apps, my apps, it shows all of my purchased apps on my phone. When I right click it tells me who purchased it (99% of them say the same apple id that I am logged into that is only showing the four purchased apps, the other ones are from family sharing). Also when I look at my itunes folder on my computer, it shows all of the apps saved to my computer.
Like I said, for now I can still use the apps, but once an update comes I won't be able to anymore. Sky guide, camera+, night cam, and true skate (and 2 maps on true skate) are what I bought with my money.
So my 2 questions are:
-What caused this to happen/how can I avoid this happening again?
-Am I just supposed to buy those 4 apps again even though I purchased them on this apple id?

Well I figured out my problem lol
Email a- original apple id email
Email b- original gamecenter id
Email c- the new gamecenter id
Email d- the temporary email for switching stuff
So originally I had Email a for apple id and icloud, and Email b for gamecenter. I wanted my gamecenter and apple id to be the same. Well today I went on my moms phone and saw that I was still on family sharing under Email d. That's when it hit me, your gamecenter, apple id, and icloud are the same account. By switching my gamecenter id to Email a, I turned that into my new apple id. Now my apple id is back to normal, and my gamecenter is Email c (I don't use Email b anymore so that's why I wanted to switch it).
Basically, my problem was being stupid enough not to think that your gamecenter was connected to your apple id. My problem came from switching my gamecenter email. So that's how to avoid this, don't be an idiot and think your gamecenter is a whole different account. For anyone who ever has this problem, that's why it happened haha.

Finished clips were dropped from sequence

Similar Messages

Maybe you are looking for