Finished goods report-suggestions

Hi all,
I would like to find out from SAP, from which departments the finished goods come and finally reach the staorage location, something like a report. even if i try making a Z-report, what are the fields I can work on?
This is more of a business solution. Kindly give some suggestions.
Thankyou

T.Code: MB5B
Regards,
Rajesh Banka
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Similar Messages

RG1 summary of Finished goods-report.

Hi Folks,
RG1 summary of Finished goods-report.
The closing balance for a particular material number during the month Jan 2007 is showing 1.00 but the opening balance for the same material number during the month February 2007 is showing 0.00 but not 1.00.
I mean to say the closing balance in January 2007 is not carrying forward into the month Feb 2007.May I know how to go ahead with this problem.
What is the concept of UPDATE RULES of the table.?
The previous developer has developed the following report.
REPORT zxxx MESSAGE-ID z_apd.
*& Includes *
INCLUDE <icon>.
*& Tables *
TABLES : j_1irg1,
j_2irg1bal,
z2irg1bal,
ser03,
objk.
*& Selection Screen *
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS : p_exgrp TYPE j_1irg1-exgrp OBLIGATORY,
p_stdate LIKE sy-datum OBLIGATORY,
p_endate LIKE sy-datum OBLIGATORY.
SELECT-OPTIONS s_chapid FOR j_1irg1-chapid .
SELECTION-SCREEN : END OF BLOCK blk1.
*& Data Declaration *
Internal Tables
DATA : it_display TYPE TABLE OF zj1irg1,
it_final TYPE TABLE OF zj1irg1,
it_alv TYPE TABLE OF zj1irg1,
Work Areas
wa_display TYPE zj1irg1,
wa_alv TYPE zj1irg1,
it_display1 TYPE TABLE OF zj1irg1,
wa_display1 TYPE zj1irg1,
wa_alv1 TYPE zj1irg1.
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zj1irg1.
DATA: END OF it_itab.
DATA : BEGIN OF itab1 OCCURS 0,
matnr LIKE j_1irg1-matnr,
END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0,
cpudt LIKE j_1irg1-cpudt,
END OF itab2.
DATA : BEGIN OF itab3 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: END OF itab3.
DATA : itab4 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE,
itab5 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab6 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA : sernr LIKE objk-sernr.
DATA: END OF itab6.
DATA : BEGIN OF itab61 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: sernr LIKE objk-sernr.
DATA: END OF itab61.
DATA : itab7 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal1 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE.
DATA: qty_menge LIKE j_1irg1-menge,
iss_menge LIKE j_1irg1-menge,
tot_menge LIKE j_1irg1-menge,
op_menge LIKE j_1irg1-menge,
matnr LIKE j_1irg1-matnr,
exgrp LIKE j_1irg1-exgrp ,
cpudt LIKE j_1irg1-cpudt.
*for checcking lines of itab
DATA: n1 TYPE i.
Others
DATA : v_bwart TYPE mseg-bwart,
v_index TYPE i,
v_index1 TYPE i,
count(4) TYPE n VALUE '0',
neg TYPE char1 VALUE '-',
menge TYPE char16,
count_1 TYPE i,
count_2 TYPE i,
count_3 TYPE i,
count12(4) TYPE n VALUE '0',
count13(4) TYPE n VALUE '0'.
*Ranges
RANGES: v_bwart1 FOR mseg-bwart.
For ALV Display
DATA : gs_variant TYPE disvariant,
gs_layout TYPE lvc_s_layo,
c_stk TYPE scrfname VALUE 'ZRG1',
custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA : grid1 TYPE REF TO cl_gui_alv_grid,
event_receiver TYPE REF TO lcl_event_receiver,
ok_code TYPE sy-ucomm,
it_fieldcatalog TYPE lvc_t_fcat,
wafieldcatlog TYPE LINE OF lvc_t_fcat,
lt_rows TYPE lvc_t_row,
wa_rows TYPE LINE OF lvc_t_row.
*& Start of Selection *
START-OF-SELECTION.
IMPORT s_chapid FROM MEMORY ID 'SCHAPID'.
PERFORM get_data.
IF it_display[] IS INITIAL.
No Details Available
MESSAGE i017(z_apd) WITH text-005.
STOP.
ELSE.
Display the Details on the Screen
sort it_display by matnr.
*sort it_display by cpudt RISINDR RISINDI matnr.
LOOP AT it_display INTO wa_display.
ON CHANGE OF wa_display-matnr.
*insert
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
ENDIF.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion.
ENDIF.
CLEAR: qty_menge,
iss_menge,
tot_menge,
count,
matnr,
cpudt,
exgrp.
ENDON.
loop at itab6.
AT NEW matnr.
v_index = 1.
count = count + 1 .
ENDAT.
IF v_index = 1.
CLEAR v_index.
*INsert for adding start
IF wa_display-risind = 'R'.
*wa_display-OP_FINISH = wa_display-OP_FINISH +
wa_display-CB_FINISH +
wa_display-MENGE.
wa_display-op_finish = wa_display-menge.
qty_menge = wa_display-op_finish.
IF wa_display-status = space.
tot_menge = tot_menge + qty_menge + wa_display-cb_finish .
ELSE.
tot_menge = tot_menge - qty_menge + wa_display-cb_finish.
ENDIF.
*tot_menge = op_menge.
op_menge = tot_menge.
ELSE.
*Qty Issued
wa_display-op_bond = wa_display-op_finish - wa_display-menge.
IF wa_display-op_bond LT 0.
iss_menge = wa_display-op_bond.
iss_menge = ABS( iss_menge ).
*Start of modification
tot_MENGE = tot_MENGE - iss_MENGE ."
IF count LE 1.
tot_menge = wa_display-cb_finish - iss_menge ."
ELSE.
tot_menge = tot_menge - iss_menge ."
ENDIF.
*End of modification
op_menge = tot_menge.
ENDIF.
ENDIF.
*wa_display-MENGE_FINI = wa_display-OP_FINISH - wa_display-OP_BOND.
*tot_MENGE = tot_MENGE + qty_MENGE - iss_MENGE .
wa_display-menge_fini = tot_menge.
**matnr for insert
matnr = wa_display-matnr.
*excise group
exgrp = wa_display-exgrp.
*Date
cpudt = wa_display-cpudt.
*Opening Balance
*Insert start
*if count le 1.
if wa_display-RISIND = 'R'.
wa_display-CB_FINISH = wa_display-CB_FINISH + qty_MENGE.
else.
wa_display-CB_FINISH = wa_display-CB_FINISH - iss_MENGE.
endif.
*endif.
*Insert End
IF count GT 1.
IF wa_display-risind = 'R'.
wa_display-cb_finish = tot_menge - qty_menge.
ELSE.
wa_display-cb_finish = tot_menge + iss_menge.
ENDIF.
ENDIF.
*check it_display-SERIALNO = wa_display-SERIALNO.
MODIFY it_display FROM wa_display.
*INsert for adding end
*move-corresponding wa_display to it_itab.
*append it_itab.
*check it_itab-SERIALNO = wa_display-SERIALNO.
*if sy-subrc = 0.
*endif.
*Insert to update closng to balance to Rg1bal table
*start
count12 = count12 + 1.
*for last record
AT LAST.
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion
ENDIF.
ENDIF.
ENDAT.
*Insert to update closng to balance to Rg1bal table
*end
MOVE-CORRESPONDING wa_display TO wa_alv.
APPEND wa_alv TO it_alv.
append itab6 to it_alv.
ENDIF.
ENDLOOP.
loop at it_alv into wa_alv.
wa_alv-exgrp = wa_alv-exgrp.
wa_alv-SYEAR = wa_alv-syear.
wa_alv-SERIALNO = wa_alv-SERIALNO.
endloop.
EXPORT it_alv TO MEMORY ID 'ABCD'.
call screen 100.
ENDIF.
*& End of Selection *
END-OF-SELECTION.
*& Class Definition *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm,
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
*& Class Implementation *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Local Variables
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to to show printing
CLEAR ls_toolbar.
MOVE 'PRINT' TO ls_toolbar-function.
MOVE icon_print TO ls_toolbar-icon.
MOVE 'Print Receipts' TO ls_toolbar-quickinfo.
MOVE ' Print' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " Handle_toolbar
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'PRINT'.
REFRESH : lt_rows , it_final.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
LOOP AT lt_rows INTO wa_rows.
READ TABLE it_alv INDEX wa_rows-index INTO wa_alv.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
ENDLOOP.
perform display_form.
ENDCASE.
ENDMETHOD. "handle_user_command
METHOD handle_double_click.
IF e_column = 'MBLNR'.
READ TABLE it_alv INDEX e_row-index INTO wa_alv.
IF sy-subrc = 0.
REFRESH it_final.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
PERFORM call_migo.
ENDIF.
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data .
*Select only for matnr and chapid from table
SELECT matnr FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab1
WHERE exgrp = p_exgrp
AND
WERKS = P_WERKS
and
MATNR in s_MATNR
and
CPUDT in s_CPUDT.
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY matnr.
SORT itab1 BY matnr. " for performance
DELETE ADJACENT DUPLICATES FROM itab1 COMPARING matnr .
SELECT cpudt FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab2
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY cpudt.
SORT itab2 BY cpudt. " for Performance
DELETE ADJACENT DUPLICATES FROM itab2 COMPARING cpudt .
LOOP AT itab1.
LOOP AT itab2.
*on change of itab1-matnr or itab2-cpudt.
*select * from J_1IRG1
CLEAR itab3.
SELECT * FROM j_1irg1
*into itab3
APPENDING CORRESPONDING FIELDS OF TABLE itab3
WHERE matnr = itab1-matnr
AND
cpudt = itab2-cpudt.
*count = count + 1.
IF sy-subrc EQ 0.
LOOP AT itab3.
*count = count + 1.
*READ TABLE itab3 INDEX count."1.
IF itab3-risind = 'R'.
MOVE-CORRESPONDING itab3 TO itab4.
APPEND itab4.
DELETE itab3.
MOVE-CORRESPONDING itab4 TO itab6.
APPEND itab6.
CLEAR itab4.
ELSE.
MOVE-CORRESPONDING itab3 TO itab5.
APPEND itab5.
DELETE itab3.
MOVE-CORRESPONDING itab5 TO itab6.
APPEND itab6.
CLEAR itab5.
ENDIF.
ENDLOOP.
ENDIF.
*endon.
ENDLOOP.
ENDLOOP.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE itab7
WHERE exgrp = p_exgrp
AND
datum LE p_stdate
ORDER BY datum.
SORT itab7 BY datum.
DELETE ADJACENT DUPLICATES FROM itab7 COMPARING datum .
*insert Start
LOOP AT itab6.
DELETE itab7 WHERE matnr NE itab6-matnr.
ENDLOOP.
*insert End
*insert Start
LOOP AT itab6.
CLEAR itab61. REFRESH itab61.
CLEAR wa_display.
MOVE-CORRESPONDING itab6 TO wa_display.
EQPT Serno
count13 = 1.
SELECT SINGLE obknr FROM ser03 INTO ser03-obknr WHERE
mblnr EQ itab6-mblnr
AND mjahr EQ itab6-mjahr.
IF sy-subrc EQ 0.
SELECT sernr FROM objk INTO CORRESPONDING
FIELDS OF TABLE itab61 WHERE
obknr EQ ser03-obknr.
DESCRIBE TABLE itab61 LINES n1.
*do N1 times.
LOOP AT itab61.
IF count13 EQ 1.
wa_display-sernr = itab61-sernr.
ENDIF.
IF count13 EQ 2.
wa_display-sernr1 = itab61-sernr.
ENDIF.
IF count13 EQ 3.
wa_display-sernr2 = itab61-sernr.
ENDIF.
IF count13 EQ 4.
wa_display-sernr3 = itab61-sernr.
ENDIF.
IF count13 EQ 5.
wa_display-sernr4 = itab61-sernr.
ENDIF.
IF count13 EQ 6.
wa_display-sernr5 = itab61-sernr.
ENDIF.
IF count13 EQ 7.
wa_display-sernr6 = itab61-sernr.
ENDIF.
if count13 eq 8.
objk-SERNR8 = objk-SERNR.
endif.
if count13 eq 9.
objk-SERNR9 = objk-SERNR.
endif.
count13 = count13 + 1.
endselect.
ENDLOOP.
*enddo.
ENDIF.
endif.
*End of Modification Eqpt Serial No
MOVE-CORRESPONDING itab6 TO wa_display.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = itab6-matnr
AND datum LE p_stdate
AND exgrp = itab6-exgrp.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
ON CHANGE OF itab6-matnr .
wa_display-cb_finish = it_bal1-cb_finish.
ENDON.
AT LAST ."matnr.
wa_display-cb_finish = it_bal1-cb_finish.
ENDAT.
APPEND wa_display TO it_display .
CLEAR wa_display-cb_finish.
CLEAR it_bal1. REFRESH it_bal1.
ENDLOOP.
SELECT * FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE it_itab
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate.
DESCRIBE TABLE it_itab[] LINES count_1.
count_3 = count_1 + 1.
DESCRIBE TABLE it_display[] LINES count_2.
IF it_display IS NOT INITIAL.
DELETE it_display FROM count_3 TO count_2.
ENDIF.
*start of insertion
DELETE it_display WHERE status = 'C'.
LOOP AT it_display INTO wa_display.
CLEAR wa_display-cb_finish.
MODIFY it_display FROM wa_display.
ON CHANGE OF wa_display-matnr .
SELECT * FROM z2irg1bal
INTO CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = wa_display-matnr
AND datum LE p_stdate
AND exgrp = wa_display-exgrp.
IF sy-subrc = 0.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
wa_display-cb_finish = it_bal1-cb_finish.
MODIFY it_display FROM wa_display.
ENDIF.
ENDON.
ENDLOOP.
*End of insertion
ENDFORM. " get_data
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZRG1'.
SET TITLEBAR 'ZRG1'.
DATA: lt_exclude TYPE ui_functions.
IF custom_container IS INITIAL.
Create the Custom Container
CREATE OBJECT custom_container
EXPORTING
container_name = c_stk.
Create an instance of alv control
CREATE OBJECT grid1
EXPORTING
i_parent = custom_container.
Layout Settings
gs_layout-sel_mode = 'A'. " Multiple Lines
MOVE 'RG1 Register' TO gs_layout-grid_title.
Prepare the Field Catalog
PERFORM prepare_catalog.
To Exclude the PRINT Button from the Standard toolbar of ALV
PERFORM exclude_tb_functions CHANGING lt_exclude.
Display the List for ALV Display
CALL METHOD grid1->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
is_layout = gs_layout
CHANGING
it_fieldcatalog = it_fieldcatalog[]
it_outtab = it_alv[].
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET HANDLER event_receiver->handle_double_click FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form exclude_tb_functions
text
<--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
Local Varaibles
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_print.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " exclude_tb_functions
*& Form prepare_catalog
text
--> p1 text
<-- p2 text
FORM prepare_catalog .
DATA : v_index TYPE i.
*Entry Date
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CPUDT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 Entry Date'.
wafieldcatlog-reptext = 'RG1 Entry Date'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Serial No
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERIALNO'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 serial number'.
wafieldcatlog-reptext = 'RG1 serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CHAPID'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Chapter ID'.
wafieldcatlog-reptext = 'Chapter ID'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MBLNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Number of Material Document'.
wafieldcatlog-reptext = 'Number of Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Item
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ZEILE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Item in Material Document'.
wafieldcatlog-reptext = 'Item in Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'BWART'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Movement Type'.
wafieldcatlog-reptext = 'Movement Type'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Quantity'.
wafieldcatlog-reptext = 'Quantity'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-DO_SUM = 'X'.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*Base Unit of Measure
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MEINS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Base Unit of Measure'.
wafieldcatlog-reptext = 'Base Unit of Measure'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-do_sum = 'X'.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Number
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MATNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Number'.
wafieldcatlog-reptext = 'Material Number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*CB_FINISH
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CB_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Opening Balance'.
wafieldcatlog-reptext = 'Opening Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*materail manufactured
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Manufactured'.
wafieldcatlog-reptext = 'Qty Manufactured'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Issued
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_BOND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Issue'.
wafieldcatlog-reptext = 'Qty Issue'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Total
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE_FINI'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Closing Balance'.
wafieldcatlog-reptext = 'Closing Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Description
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MAKTX'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Description'.
wafieldcatlog-reptext = 'Material Description'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Storage Location
v_index = v_index + 1.
wafieldcatlog-fieldname = 'LGORT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Storage Location'.
wafieldcatlog-reptext = 'Storage Location'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Goods Movement Direction
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Reference Document 1
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RDOC1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Reference Document 1'.
wafieldcatlog-reptext = 'Reference Document 1'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Excise Duty Base Amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBAS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Excise Duty Base Amount'.
wafieldcatlog-reptext = 'Excise Duty Base Amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Basic Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Basic Excise Duty'.
wafieldcatlog-reptext = 'Basic Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Additional Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXAED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Additional Excise Duty'.
wafieldcatlog-reptext = 'Additional Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Special Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXSED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Special Excise Duty'.
wafieldcatlog-reptext = 'Special Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Cess amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CESS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Cess amount'.
wafieldcatlog-reptext = 'Cess amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*ECS Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ECS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'ECS Value'.
wafieldcatlog-reptext = 'ECS Value'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
**Register Entry Status
v_index = v_index + 1.
wafieldcatlog-fieldname = 'STATUS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Register Entry Status'.
wafieldcatlog-reptext = 'Register Entry Status'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*EQPT Serno 1 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 2 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 3 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR2'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 4 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR3'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 5 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR4'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 6 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR5'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 7 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR6'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
ENDFORM. " prepare_catalog
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
IF ok_code = 'EXIT'.
CALL METHOD grid1->free.
CALL METHOD cl_gui_cfw=>flush.
leave program .
LEAVE TO SCREEN 0.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form call_migo
text
--> p1 text
<-- p2 text
FORM call_migo .
CALL FUNCTION 'MIGO_DIALOG' "n547170
EXPORTING "n547170
i_action = 'A04' "n547170
i_refdoc = 'R02' "n547170
i_notree = 'X' "n547170
i_no_auth_check = ' ' "n547170
i_deadend = 'X' "n547170
i_skip_first_screen = 'X' "n547170
i_okcode = 'OK_GO' "n547170
i_mblnr = wa_alv-mblnr "n547170
i_mjahr = wa_alv-mjahr . "n547170
ENDFORM. " call_migo

T.Code: MB5B
Regards,
Rajesh Banka
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

Finished goods reporting

Hi
Can any one find me sample reports for Finished Goods.For example
"Ability to generate finished good report by day, week, monthly, yearlyetc".
Any info on what tables in R/3 might contain the data
Any help will be duely rewarded with mx points
Thanks
RV

RV,
Not sure what excatly you require but you can have a look at transaction MB5B, which gives stock snap shot on a particular day and also for a period of time.
All the goods movement has materail document associated with it, so you can take the data from MSEG table, and with suitable movement and posting date combination you can create a report.
Example all materails documents for a material with net off Movement type 101 minus 102 will give the status as what was produced or recieved from Vendor. Movement type 601 minus 602 would give you details on what was delivered to customer etc....
Hope this helps...
Regards,
Prasobh

Finished goods reports

Hi
Can any one find me sample reports for Finished Goods.For example
"Ability to generate finished good report by day, week, monthly, yearlyetc".
Any info on what tables in R/3 might contain the data
Any help will be duely rewarded with mx points
Thanks
RV

hi try with MM related tables for transaction data (Table MARD, MBEW, MSKA)

Finished Goods Report

Dear Experts,
In our legacy Inventory Managment system we have develop following layout for Finished goods periodic report. (From date to Date)
Materiral Description, UOM, Opening , Receipt , Return , Transfer, Dispatch , Reprocess, Repack, Replace, Adjust , Closing
Progressive Receipt, Progressive Dispatch.
as per above formate we have devlop in our Legacy system. Now we are going to implement SAP in our organization. Pl. guide us how to develop above report in SAP MM Module.
Opening -- Opening Stock
Receipt -- means Production receipt
Return -- Means Customer return
Transfer -- Meanse one plant to another plant or depot.
Dispatch -- Means sales
Reprocess -- Means Material return to production for reprocee ( Butter return for making ghee like that)
Repack -- Means convert one pack size to another pack size ( 50 x 400gm big pack convert in 10 x 400gm small pack)
Replace -- Replace finished goods to customer.
Adjust -- Destroy rejected finished goods.
Closing - Closing Stock
Progressive Receipt : meanse cummulative of Production receipt from date to date.
Progressive Dispatch : Meanse cummulative of Production dispatch form date to date.
Pl. help me how to incoporate this report in sap. or acceptable any users have good idea to develop the report and also give suggestion from any organization which is using in different way.
Thanks a Lot.
Piyush Dave

THANSK FOR REPLY PL. CLOSE

Ageing (Aging) Report for Finished Goods Inventory

Dear SAP Members,
The client would like to analyze the ageing (aging) of their finished goods inventory in the system. Could you please share any report in the system which would serve this purpose.
Regards,
Mohammed Ali Khan.

Hi Khan,
we don't have standard report u will develop it i have also same problem i am going to develop the new report for this .
Thanks and Regards,
Nauma.

Standard report for the cost of raw materail in production of finished good

Is there any standard report for calculation of raw material cost from the production order of finished goods.?
plz help in this issue.
Thanks.

closed

Costing Report summarized production cost by Finished Goods Material

Dear Expert,
I am looking for a report that can summarized the production cost in production order by Finished Goods Material Number.
or a report that can show me the cost components incurred related to a Finished Goods Material.
Can any expert enlighten me? please help.
Thanks a lot.

Hi
I would recommend the product drilldown reports in KKO0...
For this you will have to do settings in OKN0 (Asisgn a Cost Comp Structure and specify the Product Group)
After this, execute KKRV to collect the summarized data and then you can use KKO0 reports
It gives cost of production as per the Cost Comp Str and also the product no, product group, Prod Order etc
Regards
Ajay M

Report on Finished goods stock

Hi friends ,
I got a task to do .
Description:
"Age Analysis of Finished Good Stock: - Interactive report. Double click on the line item will give the batch wise stock details."
Can any one give some more elaborate information regarding this.
And please give what are the tables and fields might necessary for this.
With Best Regards,
Priyanka Sai.

Hi satya,
the report says that depending on the days difference of your material...the stock details shud be diplayed in the secondary list....
hence for priomary list using the table MARA for a material number calculate the ageing period..in the sense sysdate-created date(ersda)..gives the days analysis..
for this in the secondary report code such that stock details from MARD,MARC,MARDH is retreived...chck the reqquired fields..
matnr,ersda,and corresponding fields of stcok in the other tables...
hope this helps u a bit,
all the best,
regards,
sampath
mark helpful answers

SQL Query base Finish goods year wise report

Hi
I want to make query base year wise report of Finish Goods.
example like :
Item Name     Year2010-11                           Year2011-12
   abc         Sep   Oct   Nov                 Sep    Oct   Nov
    xyz        5     0      10                   2    5      0
Why this report is need to me because i want to see How old Finish Goods are in the Stock. so that when a delivery make, the person can delivery from old stock first.
Our FY is from September to August
Please help me
Regards,
Mizan
Edited by: mizan700 on Nov 15, 2011 3:28 PM

Hi Eva,
As Sybrand mentioned, you can't create DDL inside a procedure, and you probably don't need a temporary table. Temporary tables in SQL server used to be used to create a read consistent view for the duration of the procedure, but Oracle's multi version concurrent consistency model eliminates this as a need in all but the most remote cases.
Your create table only seems to be used to take arguments from the user, which I don't see in your code.
If I am looking at your code correctly, all you really want to ask the database is the following:
select nvl(sum(dc.daily_count),0)
from daily_counts_summary dc, branch br, division div
where dc.branch_ky = br.branch_ky
    and br.division_ky = div.division_ky
    and dc.transaction_dt = t.trndt
    and dc.commission_cd = 'R'
    and div.division_ky = nvl(v_div_ky,div.division_ky)
    and dc.member_type_cd, 'P'
    and dc.expiration_dt between v_exp_start_dt and v_exp_end_dt;You can do this in Crystal Reports by writing a procedure that has an out parameter of type sys_refcursor. All you have to do is:
create or replace procedure my_proc(p_curs in out sys_refcursor,v_exp_start_dt date,v_exp_end_dt date) is
begin
open p_cur for
select nvl(sum(dc.daily_count),0)
from daily_counts_summary dc, branch br, division div
where dc.branch_ky = br.branch_ky
    and br.division_ky = div.division_ky
    and dc.transaction_dt = t.trndt
    and dc.commission_cd = 'R'
    and div.division_ky = nvl(v_div_ky,div.division_ky)
    and dc.member_type_cd, 'P'
    and dc.expiration_dt between v_exp_start_dt and v_exp_end_dt;
end;
/...or something close to that, with perhaps calls to your date functions to extract what you need.
You also have several syntax errors in your code. I would recommend you get two books if your are going to work with Oracle:
Anything by Tom Kyte
Anything by Steven Feuerstein
These would both be available on amazon.com
HTH,
Steve

Plantwise Production & Sales report for Finished Goods

Dear All,
Please let me know how to generate Plantwise Production & Sales report for Finished Goods. Is there any t code?
Regards,
Anil

Dear All,
Thank you for the solutions. But can i draw the values in one single report. It will be more useful.
Regards
Anil

Sap Standart Finish Stock REPORT

Hi All
Can any one please suggest me any sap standard report similar to the bellow mentioned requirement of my cliect
                                                                 FINISH GOODS STOCK POSITION
Product Name     Rate            Opening Stock        Production in the Month        Month's Sale                        Closing Stock
                                                Qty.       Value          Qty.            Value               Qty.     Value                       Qty.     Value
xxx                       xx              xx             xx              xx                  xx               xx           xx                         xx           xx
I have just give the format to explain it . Hope MM , FICO people can articulate it.
Thanks

Hi
I always use MB5L and double click on the GL line.
It is alot faster than MB5B but is only available for
current period
last period
last year
Other options are:
MC.1
MB52
Cheers
Tim

If Excise invoice required for finished goods.

Hi All
I have doubt, whether excise invoice is required for finished goods or not. As I am trying to create MIGO doc for PO of finished material, and it is saying, no excise invoice possible for finished material RG1.
Can you advise please.
Regards
Mukta

HI
Thanks for this. When we are executing Utilization transaction J2IU, it is giving dump after prompting popup with 'Data will be lost PLA NCCD B35', 'No record selected , excise invoice cancelled'.
Run time error is saying -
Short text
    Structure-type conflict when calling a FORM
What happened?
    Error in the ABAP Application Program
    The current ABAP program "J_1IRUTZ" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
The actual parameter no. 2 is at PERFORM not compatible with the
structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
This error occurs in Unicode if the fragment view of the types is
incompatible.
Can some one suggest if we need to apply any OSS NOTE.
Regards
Mukta

How can I get the material consumption of the month for each specific Finished Good?

(Sorry, I first opened this discussion in another space. I guess here's where it belongs).
Dear Experts,
This is the first time I open a discussion. I'm new at this. I've been reading for a couple of months your forums and certainly you've helped me a lot. Thanks for that. Keep it up! ^_^
Now on business. Let me explain a bit about what I'm looking for.
I've been looking for a report that shows me the material consumption of the month in quantities. Raw Material and Packaging Material to be more specific. Also I need to see the consumption of those materials by each specific Finished Good.
For example, I know the consumption of Flour of all the month, but we use it for all our Finished Goods or SKU's as we call them, since we make cookies. How can I know how much Flour each Finished Good actually used?
I've been trying with different T-Codes, reports, etc. The last thing I've got is using transaction MB51 and filtering movements type from 261 to 262. The beauty of this report is that shows me the Process Order number, since I can match the PO number to a Finished Good with another report from BI (or BEX, however you call it).
Everything was fine until I found that there are some PO's that are not directly related to a Finished Good, but to a Semi Finished Good. In some cases I'm able to match the Finished Good, since the majority of Semi Finished Goods are uniques to a Finished Good. But there are three specific cases that are my problem right now:
Cream X: We use it for three Finished Goods.
X Syrup: We use it for all the Finished Goods.
Refined X Sugar: We use it for three Finished Goods.
So those three are Semi Finished Goods which are related to certain numbers of PO's I have on the report.
In the end, with the report from MB51 I have all the list of materials (filtering only Raw and Packaging), I have the consumption of the month (filtering movements 261 and 262) and I have the PO number related to each material. Of course one material is listed many times on the report, but with different PO number.
Then, like I said, I can match the PO number to a Finished Good, except in the cases where the PO is not matched to a Finished Good, but to a Semi Finished Good like the three examples I gave you.
I don't know if there's another way to track the Finished Good having the PO number. I've tried T-Code COR3, but couldn't get too far.
I hope I explained myself a bit clear and also sorry if my English is not so good.
Thanks in advance. ^_^
Warm regards,
Rol

Hi Rolando,
If the purpose is to find the consumption of a material, you can get it from report "MC.9". Plz let me know if it's useful.
Rgds,
Sudheer.

How to differentiate a packing type for Finished goods based on which customer will be invoiced ?

I need a little expertise
The requirement for my organization is Certain Finish goods packing.
Currently certain, Finished goods packaging items when send to Customer, is charged for the packaging items like Pallets , Q- Bit Boxes.
There will be a deposit fee which will appear on the customer invoice.
Moving forward they want to eliminate that deposit fee, from the customer invoice for a few of the packaging types.. (For example Pallet we would still charge the customer the same way AS_IS today but for another pack type Q-BIT boxes customer should not be charged as a deposit fee for returing the pack type.)
From Materials management perspective… At the time of order entry how do we differentiate a particular pack type so that for that a particular Pack type customer is not charged anything…
2 options I am thinking is introduce a new characteristics in Classification view for PK type.. Upon entering the order the User exit will check the characteristic in material master and customer invoice won’t be charged for the Packing item if Pack type = Q Bit..
Other one is From the Alternate Unit of Measure translation to Common Unit of measure / Sales Unit of measure.
Which one would you recommend ?
Pls advise.

Hi Joe,
What I was suggesting was to have different material codes per pack size. If this is done, you will not need to modify anything, other than maintain condition types for the correct material codes.
In case you are leaning towards the classification approach, I will suggest having a custom calculation type added to include RV64ANNN with a check of the characteristic on a custom table. In this table, maintain the pack sizes with should be charged. The logic should turn XKOMV-KBETR = 0 if the pack size is not found in the table.

Finished goods report-suggestions

Similar Messages

Maybe you are looking for