Finished installing Verizon Media Manager but execute the program

I get an error message;
c:\Program Files\Verizon Media Manager\Release\Verizon Media Manager.exe
The application has failed to start becuase its side-by-sde configuration is incorrect. Please see the application event log for more detail.
How do I get it to run? I'm using Vista Home Basic. Please help.

The Media Manager program is compatible with Windows Vista. Make sure the program is being installed using an administrator account in Windows as well. If you need further help, please refer to the private message I sent you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

  • Verizon Media Manager won't install - How do I get photos from my phone memory to my PC?

    I'm getting frustrated with my new Droid, HTC Incredible. The salesman said I could just plug in the USB and transfer my photos to and from my computer, that the phone would look just like an external hard drive. False...
    I plug in the USB and get an option to open the folders or to install drivers. If I chose to open the folders, I see three external drives - one with an autorun.inf file and a few other files. If I click on the other two drives, I get a message telling me to install a disk in the drive.
    If I click, "Install Drivers" I am taken to the VerizonWireless website and instructed to install Verizon Media Manager. Okay, so I try to do that, on my Windows 64 bit OS, and get a message that says,
    "This Application does not support 64 bit operating systems - operation aborted" (or something like that).
    So now what?

    I apologize you are having problems connecting your device with your PC.  
    Try using these steps below:
    Windows 7 
    Click Start > Control Panel > System and Security > Device Manager. 
    Windows Vista 
    Click Start > (Settings) Control Panel > (System and Maintenance) > Device Manager.
    If prompted, click Continue.
     Windows 2000 / XP 
    Click Start > (Settings) Control Panel > (Performance and Maintenance) > System > Hardware > Device Manager.
    The following devices are normally installed:
    Anrdoid USB Devices 
    My HTC 
    Disk drives 
    HTC Android Phone USB Device 
    Modems 
    HTC Modem (if using as a tethered modem) 
    Portable Devices 
    E:/ (Where E represents the assigned drive letter.) 
    Universal Serial Bus controllers 
    USB Composite Device
    USB Mass Storage Device 
    If a red X, yellow ! or yellow ? is displayed to the left of a listed device, a conflict is present and the drivers must be updated or reinstalled.
    Driver conflicts may also be indicated by a device entry labeled Other Devices or Unknown.
    1.  If using the HTC DROID Incredible ADR6300 as a Sync device continue to step 3. If using the HTC DROID Incredible ADR6300 as a Modem ensure the device drivers are installed. 
    2.  If VZAccess Manager is installed and a driver conflict is still present, continue to step 3. Right-click the device then click Update Driver Software.
    3.  If using Windows 2000 / XP, right-click the device then click Update Driver.
     The device name may differ from the example shown.
    4. Click Browse my computer for driver software.
    If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
    Enter C:\Windows\System32\driver into the search window then click Next.
     If using Windows 2000 / XP, ensure that Search for the best driver in these locations and Include this location in the search are selected.
    5.  The driver location can be entered manually or navigated to by clicking Browse.
     If the driver software is not found, a Windows Operating System update  may be needed.
    6. Click Close.
     If using Windows 2000 / XP, click Finish.
    Once your done, you should be able to see one of the following choices in  your My Computer:
    Anrdoid USB Devices 
    My HTC 
    Disk drives 
    HTC Android Phone USB Device 
    Modems 
    HTC Modem (if using as a tethered modem) 
    Portable Devices 
    E:/ (Where E represents the assigned drive letter.) 
    Universal Serial Bus controllers 
    USB Composite Device
    USB Mass Storage Device 
    You can then sync the device with the PC. 
    Connect the device to the computer with the USB cable. From the home screen, pull down the window shade (located at the top of the screen).
    Touch Disk drive then touch Done.
    From File Explorer / Finder on the computer, create a new music folder in Removable Disk (X.
    Removable Disk (X represents the SD Card installed in the device. This name may vary.
    Use the computer to copy pictures into the newly created folder.
    From the home screen, pull down the window shade (located at the top of the screen).
    Touch Charge only then touch Done.
    Disconnect the USB cable from the computer. 

  • I think I finished installing Mountain Lion, and am at the "log in" page with my name and the Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro

    I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • Music drop outs / stutter when listening to MP3s or Internet Radio with Verizon Media Manager

    Does anybody know when I play MP3s or listen to Internet Radio I'm getting slight drop out or stutter?
    I just downloaded and installed the Verizon Media Manager on a machine running Windows 7.
    Any help would be appreciated.

    Found this answer on DSLReports...
    "This problem has reported before. It's a problem with the audio driver for 7XXX boxes that was introduced with IMG 1.9a. It also impacts iHeart radio and Pandora streaming. It is supposed to be fixed in 1.9.1, which is due sometime in the next decade."

  • Verizon Media Manager and Aperture

    I just upgraded from iPhoto to Aperture.  Verizon Media Manager (VMM) sort of recognizes Aperture, but not completely.  It finds the Faces and Locations, but not the Projects.  I am using version 9.1.42 of VMM.  I saw in the pinned section that someone was using version 9.2.  Where can I get this version?

    mustbjones wrote:
    Yes there is but it says that the update service is temporarily disabled.
    Here is the link for the Mac download from Verizon: http://www36.verizon.com/fiostv/web/UnProtected/MediaManager.aspx?os=Mac.  It is likely the current version.

  • Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

    Verizon Media Manager will not start automatically with Windows, even though it is set to do so.  This started with the latest update.  I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
    One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
    I don't remember what the previous version was, but this one is 9.4.86.  It asked me if I wanted to update it a few days ago, and I said yes.
    I am running Windows 7 Home Premium.
    Solved!
    Go to Solution.

    Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
    Attached is a partial screen shot of my msconfig setting.
    Attachments:
    media manager startup cmd line.jpg ‏18 KB

  • Verizon Media Manager won't open in Windows.

    My Verizon Media Manager was working fine and all of sudden I get this error message
    Verizon Media Manager has stopped working.
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    And the program closes.
    Anyone know what the heck is going on? What is the problem?

    Dear toothsave,
    Sorry about the inconvenience.  Have you attempted to uninstall and reinstall it?  Have you installed any new software that may have affected your computer? 
    Thanks in advance
    Javier
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

  • Verizon Media Manager is setting off my Anti-Virus!

    Today I ran a virus scan (using the ESET online Scanner www.eset.com/online-scanner ) and it only showed 1 threat:
    the scan results were as follows:
    C:\Program Files\Verizon\Verizon Media Manager\Release\VaultMediaClient.dll
    probably a variant of Win32\Genetik trojan
    cleaned by deleting - quarantined
    =========
    Why is eset detecting this? Please advise ASAP. This is not the 1st time a Verizon product set off my anti-virus software. Last time it was because of a file delivered in Verizon in-home agent...
    Help!!
    Thanks
    MJ

    It's entirely possible that it's a false positive.  You should contact your Anti-virus provider to see what their procedure is for reporting a false positive to them.   They will usually provide you with instructions on how to upload the questionable executable so that they can check it in depth and make the necessary corrections if appropriate.

  • "drm device registration failed" Verizon Media Manager android tablet

    I get the error "drm device registration failed" using Verizon Media Manager on an android tablet.  Any ideas?

    Poodles wrote:
    I get the error "drm device registration failed" using Verizon Media Manager on an android tablet.  Any ideas?You get this error if the device is "rooted" (meaing you have full root access).  There is an app in the Google Play Store that will temporarily allow you to un-root the device, and when done the registration will work.   I use OTA RootKeeper to temporarily un-root and then re-root.  The device must be un-rooted each time you attempt to use the Verizon Medai Manager app to view content.

  • I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

    I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

    You know that you have to connect the iPad to your PC with the cable that came with it -  and then iTunes should start automatically and it will guide you through the set up process?
    If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again.

  • TS3212 im having trouble installing itunes!! it downloads but when i install it it run but at the end it always says error!! i have a windows 7 latop

    it wont let me install itunes! i click run then install and it runs but at the end it always says error!

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 8007054F, or some other number? (If they're another number, what number are you getting?)

  • Installing Adobe Extension Manager and get the error message

    I am trying to install Adobe Extension Manager and get the error message ' Requires Photoshop 32 version in range of inclusively 13.0 and 13.9'  Please help me solve this, not sure how to proceede after getting a message that there is four updates available to download !

    Type <b> about:addons </b> in URL
    *plugins and extension -> disable adobe reader

  • Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!

    Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Tcode opens selection screen, but does not executes the program

    Hi!
    tcode opens selection screen of a custom program, but it seems that it does not executes the program itself.
    Sounds strange, but how to explain this if I can run a program manually with no problem and it displays result screen, but when I try to run the program with tcode - it opens selection screen but program quits before displaying result screen. I was putting a breakpoint at the begining of the program - it does not triggers debuger when running a tcode (it triggers debugger if to run program manually).... any ideas?
    Help will be appreciated,
    Mindaugas

    Are you using this???
          SET PARAMETER ID '80B' FIELD T_TABLE-OPBEL.
          CALL TRANSACTION 'FPE3' AND SKIP FIRST SCREEN.
    That way it should work....
    Greetings,
    Blag.

  • I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

    I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

    Because I know enough to be dangerous...  I was trying to extend the two outside columns down....  Instead of just using faux columns which I have fixed since I posted the question.
    The other link problem is the left sidebar links.  When you go to the event photos page I have a repeat of the sidebar links that are on the newsletter page.  I used named anchors on the newsletter page to link to the particular article.  From the Event Photos page the links look like this:
    <a href="1112Visions_Iss1.html/#puzzle" target="_self">[Puzzle]</a>
    The problem I am having is that some of these go to the newsletter page and the anchor and some do not (I get an error message saying it  can't find the page).  To add to the problem is that when we choose say the President's Message, when it goes to the newsletter page and the correct anchor, the newsletter page is missing all the links to the graphics... the photos are missing the graphic for the faux columns is missing.  It makes no sense.  When I preview the newsletter page from Dreamweaver everything shows up fine.
    I do not know if all of this is being caused because I haven't posted this stuff to the site or what.  I've tried re-booting both the browser and Dreamweaver, dumping the cache and still the same nonsense.
    Got any ideas?

Maybe you are looking for