Finished my site! but looks wrong in ie 6, anyone have any ideas?
Hi everyone, i finshed my site
excitingweddings, and
it looks fine in firefox, but there are several problems in ie
which i dont understand. In several of the pages the sidebar gets
pushed down below, and sometimes the backgound graphics of the main
page dont show.
I cant figure it out, everything has enough room to fit in.
Thanks.
Hi mainemum, my wrapper div is staticaly positioned, heres
the rule that centres it, and gives it a fixed width:
#wrapper {
width: 760px;
margin: 0 auto;
text-align: left;
in terms of the correct width to use? it depends on your
users, if its a technical site its safe to assume the user will be
running in at least 1024x768, for my site i chose to play it safe,
and designed for 800x600. Have a look at this link
here
Similar Messages
-
I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?
There are reports of similar behavour but generally it is due to battery connections. Is the indicator light working steadily or does it blink or even not function. Here is the Apple document dealing with some of the problems.
http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
Is your machine within the guarantee period or under Apple care. If so, return it to any apple retailer for examination and possible replacement. -
One of the pages can be seen here.
Rob Duverger | Coffee Table Books
Thanks,
RobHi Rob,
I had to put my adblock addon on pause , and your ads appears correctly, I am adding a screenshot here
Have you already tried that? -
It keeps saying to unlock my ipod when i connect to itunes but i cant do it because my ipod odesnt display anything
Try to connect in recovery mode, explained in this article: iOS: Unable to update or restore
-
I'm having probs backing up iPhone 5 to iCloud - just sits on the backing up screen with message 'estimated time remaining....' But goes no further and doesn't back up - wifi is fine and definitely enough storage spaces. Anyone have any ideas please?
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
I am trying to download and album off ITUNES but when I get to the billing site and attempt to purchase it, it gives me a message saying "Your Session has timed out." It gives me no other option that to try again and I just keep getting the same results. Anyone have any ideas on what I can do?
Hi, Kenny.
Thank you for visiting Apple Support Communities.
There are a couple things that I would recommend trying. Try closing all open applications and power cycle the device. Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below. If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in. Be sure to test downloading an application after each step.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Cheers,
Jason H. -
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
My main confusion is why this suddenly happened today when it was perfectly fine last week.
Does anyone have any idea what could be wrong and how I could fix it? Thank you.
JinxeWelcome to the Apple Support Communities
See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801 -
After months of working OK Time Machine is reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?
asknrobson wrote:
Wierd!
I followed #C3 and loaded Time Machine Buddy, which was defnitely helpful, then deleted the file that the backup failed at, but after 3 more attempts I stopped deleting or excluding files as this wasn't improving the situation.
The recommendation is to exclude those files from being backed-up, not to delete them!
Updating boot support partitions for the volume as required:
Yes, that's a bit misleading. It just means that will be done, if it's required, which it isn't on your backups.
I have no idea if anything actually was changed however just when I had given up and walked away, TM has started working after a week of failing.
It probably did find and fix something. Just for reference, Disk Utiltiy usually shows the progress and repair messages in the center part of the window, but often doesn't when repairing a sparse bundle on a network. You can see the messages at any time by clicking the Log icon in the toolbar, or select Window > Show Log from the menubar.
Anyway, glad it's sorted out! -
Question: Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions! If so what would you recommend? Was looking at Sophos. Does anyone have any experience with this? Thanks
Do I need to run and anti virus program with MAC OSX Lion? Have heard different opinions!
You will continue to hear different opinions here, where thoughts range everywhere between "anti-virus software is the evil spawn of Satan" to "anyone not running anti-virus software is a fool."
Truth is, this is still a very personal decision on a Mac. Depending on circumstances, it is still very easily possible to stay safe without using anti-virus software, but circumstances and personal preferences vary widely. Besides which, anti-virus software cannot even remotely provide you a guarantee of protection!
To learn how to stay safe (with or without anti-virus software), and how to decide whether to use anti-virus software, see my Mac Malware Guide. -
Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?
I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router. -
Hi, I'm moving my site from MobileMe to Filezilla and there is apparently a coding error on iWeb that means when I try to get onto my site there's no access online and it says there are too many redirects. Anyone have any idea what this might be?
Well, firstly Filezilla is not a hosting company but an ftp client that helps you upload your site to your new server. You need to purchase a new hosting account first though.
If you have iWeb 09 then you can publish directly to your new host and you select the publish to ftp option and not MobileMe - MobileMe won't be here after tomorrow.
You can also publish to a local folder if want to and use Filezilla to upload your site to your server.
You don't need re-directs as MobileMe won't be here so you need to cancel and delete your domain name from your MobileMe account and then cancel any domain name forwarding that you have at your domain name registrar - that is what the redirects are about.
Firstly ensure that you have your new hostings account - Filezilla is not a host, rather an ftp client that you use to upload your site. -
Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?
Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced. -
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?
Maybe you are looking for
-
Fake Apple Inc. pages on Facebook
I would like to report some Facebook business pages that are posing as pages maintained by Apple Inc. These pages are not owned, maintained or operated by Apple Inc.; the original VERIFIED Apple Inc. business page was deleted awhile ago. In fact, one
-
HI all I have downloaded the oracle 11g and obiee 11g version for Linux 86-64 Thinking that regardless of my Linux OS version I might be able to install on both 32 and 64 bit. But as I got down downloading ubuntu there are only single flavours either
-
I try to do a program using [Sun One Studio4] this program connect to the DataBase , I use [ConnectionSource] JDBC tool to connect to the DataBase and it work successfully in the [Sun One Studio4] environment . The problem is when I try to run the ma
-
Airport Extreme + unpowered USB hub + Lacie Porsche drive = FAIL
This is more a warning than a support question: we've recently lost two (TWO!) Lacie Porsche USB2 drives by connecting them to our Airport Extreme (802.11n) via an unpowered USB hub. The drives themselves are now unusable (their little lights light u
-
Hi, I'm writing an application by using JWS and JNLP. When javaws generates a shortcut on desktop or in startmenu its parameter points to a jnlp-File in the webstart-cache. Is there any chance to let javaws generate these shortcuts using parameter li