Finished with STP sound track, now what (video from iMovie)?

I shot a wedding and am making a video from the footage for the happy couple. I used STP instead of iMovie's audio capabilities because iMovie is too limited. Unfortunately I don't have Final Cut...I understand STP and FC are designed to work hand in hand.
At any rate, when I was done editing in iMovie, I exported it a file and imported that file into STP. The only audio from the iMovie export is directly from the video cameras being used. Now that I have my final mix in STP, I want to find out if there's a way to replace the audio from the iMovie export with the audio from the STP mix. I don't see that STP has a way to export both audio and video together.
The only workaround I can think of is going back into iMovie, muting all the audio and dropping the mix from STP in its place. That's fine, but I'll have to go thru the entire iMovie export again, and that takes about 4 hours. I'd rather just swap the audio portion of the exported video.
Thanks!

well you actually know what to do in a way that's "proper." What you're looking for is a work around. You can also see the difference between pro versus consumer in applications. Now I'm going to assume that you exported as a MOV file out of iMovie. Forgive me but I've never done anything in iMovie. If you you can open the MOV in Quicktime, change the audio tracks to the new ones and then save what you have. If you had a decent DVD authoring package you'd simply export out of STP as an AC3 file and import that as the DVD audio track and the video as an M2V track, or even a MOV with no audio. The separate audio and video tracks are married in the DVD.
Hope that helps.

Similar Messages

  • Slow video playback with 2 sound tracks

    Hi,
    I've just been playing around with quicktime files with 2 sound tracks with different languages. When I copy these files to the ipod they playback, but in slow motion. Are there any guidelines for making ipod compatible 2 sound track files?
    I know there are movies in the itunes store with two sound tracks with different languages and these are supposed to work OK with the ipod nano.
    Any experiences? Thanks,
    Robintosh

    What software are you using to convert the videos to iPod format?
    If you are using Quicktime Pro, or iTunes 6 to do the conversion... then that is most likely where your problem lies.
    Your source video file is probably muxed.
    Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
    http://docs.info.apple.com/article.html?artnum=302588
    You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
    Try MPEG Streamclip.

  • I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    The description says it all.    I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    Hi Normanwh,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

    After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

    Avoid using hand-tools or power equipment .
    "My mac book did not come with dvd. Now what should i do?"
    Bring it to the Apple store. They can help.

  • Flash Player 11.6.602.180 installed on Win 7 with IE and can never play videos from

    Hi, I installed Flash Player 11.6.602.180 installed on Win 7 with IE and can never play videos from this site http://w3.newsmax.com/newsletters/uwr/video_hyman.cfm?s=al&promo_code=12CF6-1
    any idea what this site is looking for ? thanks bill m

    What do you see instead of the expected Flash content?

  • Exported a 3 minute video from iMovie to Quicktime, saved on my desktop.  It started saving as INDIVIDUAL files, as in about 5400! Entire system froze, completely unresponsive.  Powered off 3 times now, it comes on and displays my screen saver but nothing

    Exported a 3 minute video from iMovie into Quicktime, saved to desktop.  System started saving INDIVIDUAL frames instead and entire system froze.  Powered off and on twice - screensaver appears, but that's it - nothing else is accessible

    Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    You may now be able to log in and move the files off the Desktop. Then reboot as usual.

  • When i export a video from iMovie the sound goes distorted?

    When i export a video from iMovie to my camera roll or to youtube the music i've added sounds distorted. When i watch it in iMovie it sounds fine. Any idea how i can solve this problem.
    Many thanks

    Yes, I experience this same problem. The grey doesn't show up until after it is uploaded to Youtube...

  • After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

    after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • D-Link iPhoto '11 videos from iMovie '11 - SLOW SLOW SLOW

    Hi there,
    I have a slow workflow in iMovie at the moment. I have only 1 project (having cleaned out to isolate the issue). But many videos in iPhoto. That are not needed for iMovie. They're just clips from my phone. Is there a way that I can permanently d-link iPhoto videos from iMovies event library? Without moving the iPhoto library or iMovie projects and Events to another location? I want to use iPhoto in just the same way as I am, and iMovie too, but without the 2 slowing each other down!
    I have rejected all of the clips. This has not worked. Moving rejected to trash doesn't seem to work either. Either does nothing or crashes.
    This link discusses the issue in earlier versions. Have we a solution yet?
    http://forums.macrumors.com/showthread.php?t=477746
    If i absolutely need iMovie to run 'like a pro app', can I just temporarily rename the iPhoto library, and then run iMovie. Then revert when I have finished. Will this cause further problems?
    I have trashed preferences and caches.
    Thanks in advance.
    Ben

    I dont have an answer, but at least your not alone. I am having what sounds like the same exact problem. I have tried shifting more memory ect w/o success.
    Please include me on any solutions.
    Eric Cox
    [email protected]
    Model Name: Mac Pro
    Model Identifier: MacPro3,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3.2 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 12 MB
    Memory: 2 GB
    Bus Speed: 1.6 GHz

  • MPEG4 video from imovie is sluggish and audio out of sync

    Hi y'all,
    I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
    The Camera I used is a Sony FX7 HD camera with SD tape.
    So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
    Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
    However, here are the challenges I am having:
    1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
    2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
    The video is choppy as well.
    Details: source video is 720x480 and trying to export to 320x240
    My project details are:
    DV-NTSC standard 48khz
    Video is 10 min long

    OK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
    Next, you can Render your Timeline, to get things as smooth as possible.
    Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
    In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
    Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
    Good luck,
    Hunt

  • Imported video from imovie, when i try to play only have audio, screen is red and flickering

    imported video from imovie, when i try to play only have audio, screen is red and flickering.  new mac pro.

    steved
    Thanks for the reply with additional details.
    In order to help you with the Elements Organizer 13 and Premiere Elements 13 issues, we need details of that video from iMovie.
    You should be able to get the important details of the iMovie video by telling us the export settings that you used for the iMovie export.
    Minimum information..
    Video Compression
    Audio Compression
    File Extension
    Frame Size
    First, update Premiere Elements 13 and Elements Organizer 13 each to the 13.1 Update (See Help Menu/Update in an opened
    Premiere Elements 13 project.)
    We will be watching for further details in order to plan and carry out troubleshooting strategy.
    Thank you.
    ATR.

  • HT4997 I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

    I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

    I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

  • Poor video from iMovie 11 imported from supported Sony HD camcorder

    Poor video from iMovie 11 imported from supported Sony HD camcorder
    Latest model New iMac 27 " screen 3.4 ghz intel core I7, 12 GB of memory running Mac OS X version 10.7.4
    Imovie 11 version 9.0.7
    New Sony hd camcorder model HDR560V, 64 gigs of internal flash memory, recording at highest quality hd settings.
    Transfer is via USB.
    Video in camcorder screen is perfect, same video connected directly from camera to a monitor is perfect.  Also seems to be ok when importing into a Mac Book pro.
    Import into the iMac using  iMovie 11and played back full screen on the iMac has the look of  soft VHS tape, not tack sharp and pronounced video lag when panning or when a subject moves across the screen.  Has anyone else resolved a similar issue? Any suggestions would be appreciated.  I  paid for 3 years of Apple protection care but Genius bar experts at local Apple store are stumped.
    thanks
    tvideo

    I'm sorry, I didn't know Imovie has it's own Forum- it's not listed here. Looks like I need an adapter for memory card, because I have an older Mac which doesn't have a slot for the card.

  • Why does my exported video from iMovie on iOS is letter boxed on all four sides?

    The original video viewed in the cameras roll fills up the whole screen, but after exporting the edited video from iMovie, it has letter boxing on all four sides.

    You would get better results if you convert the MP4 ciips into Apple Intermediate Codec before editing. After editing you can render them back into MP4 if you want.
    MPEG Streamclip (free) will do this conversion. Or get iMovie 09 and it will do it.

  • Creating (sharing) a video with a sound-track as .wmv file,  no sound track. Any ideas?

    I'm a new user, and I have imported a video file (created by PowerPoint, and a sound-track (created by Cubase software from Steinberg.
    When I view the video within Premiere Elements it's all there - video and audio both. However, when I try to create an external .wmv file (Publish+Share), I don't get any audio.
    Set up is Windows PC running Windows XP SP3, with 4 GB of RAM, and 500 GByte hard drive. Premiere Elements version is 11.0
    What I'm doing:
    I imported the input video file and dropped it on the main Video1 timeline. Then I dropped the finished sound-track on Audio 1. When I click Play, I hear the sound-track and see the video. To Publish+Share, I select Computer from the drop-down menu. Then, in the location and settings list I select Windows Media.I choose 720*480 pixels, 4:3 aspect ration and 29.97 frames per second. In the Advanced.. panel, I make certain that Export Video and Export Audio are both checked. Ther dialog box reports that it will create a 174 MByte file, with 440 kbps/ 96 kHz audio in a 2-channel configuration.
    So I click Save, and the program hems and haws for about 34 minutes, and says it's done. All I get is the video - in a 16.414 MByte file (the original input file, also .wmv was only 9.1 MBytes), so something must have happened. However, all I get is video, and no sound-track.
    I'm totally convinced that the problem lies between my ears, but I'd like to hear someone provide some guidance. I've missed the deadline for an important project, and I don't want to slip any further :-(
    Tony

    Tony
    Let us back track through the details.
    Premiere Elements 11 on Windows XP 32 bit.
    What are the video compression and file extension of the file created in PowerPoint? What version PowerPoint? What is the frame size and frame rate?
    What are the audio compression and file extension (mp3 or .wav) of the audio created with this Cubase software? Are you dealing with mono, stereo, or 5.1 channel?
    From your description, it sounds like you are letting version 11 set the project preset for you. What is it setting? We can find that out from the reading under Edit Menu/Project Settings/General - Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio, even if the fields appear to be grayed out.
    If you import your .wmv export back into the Premiere Elements project, do you see content in both the video and audio tracks? If so, do both play back when you press the play button of the Edit area monitor?
    Have you checked Edit Menu/Preferences/Audio Hardware and ASIO and have you checked out your audio in the Edit area with the Audio Meter opened to verify sound level? See Window Menu/Audio Meters.
    Is the problem confined to this PowerPoint video and Cubase audio? What happens if you try this with a video from your camera and soundtrack from one of the SmartSound soundtracks?
    Please review the above and then let us know the answers to the questions.
    Thank you.
    ATR

Maybe you are looking for