Finished with Zen Mi

Well, I just spent 0 minutes typing up a whole post about how furious I am with the piece of crap zen micro, but now it seems even the creative WEBSITE is a piece of crap, since it just booted me out of my message for absolutely no reason...
Long story short, I'm having the same problem many people are, where the unit just "hangs" at the Creative screen and never boots up. This happened to me in April (less the six months with the product) and I had to go through the hassle of sending it in for a repair. Ever since I got it back, it's been freezing randomly and ultra sticky on most screens, when it boots up at all. So now, I go to use it and it's back to the same original problem--just hanging at the creative screen.
The thing that makes me mad is the fact that I took $200 of my money and completely wasted on this peice of garbage. It's so cheaply made and if you even THINK about moving it (IE, walking fast or jogging), the "moving parts" inside wiggle loose and, uh-oh, time for a repair!
Screw this. I'm taking a hammer to this thing and washing my hands of it. I'm gonna spend my money on a product that actually works for a long period of time (crazy idea, I know...)... This is the last Creative product I'll ever buy, and I'll be sure to tell people I know the same.
Thanks!Message Edited by mrdazzo7 on 08-6-2006 05:34 AM

"if you even THINK about moving it (IE, walking fast or jogging), the "moving parts" inside wiggle loose and, uh-oh, time for a repair!"
I've only had my micro for about a week, but 90% of the time it is in my pocket. I even knocked it off of my computer box on to my HARD WOOD floors and it was fine [it was in the dock/stand thingy, maybe that saved it's]
But running/jogging is risky business with any HDD player, so if you want to run with your mp3 player, get something with flash memory

Similar Messages

Win 7 sp1 workstations losing contact with ZEN-servers

Lately we have seen more and more of this phenomenon that seems to have been described earlier but I cannot find any clear solution anywhere.
ZAA is 11.2.3.24691 MU1 or 11.2.4.3271. Happens to ws that are known to have been working ok. ZAA properties goes almost blank, except Agent status show correct IP-address, Device state Managed. Configuration location says Default location, should be something else. Server properties Unavailable, Closest servers no available, no policies, no bundles.
zac ref "completes" in half a second but nothing happens. If device still has the IP-address that was known to ZEN it shows up green, otherwise "Unable to connect...".
Wireshark shows little communication with ZEN-servers and only when ws uses same IP-address as is known to ZEN. A refresh produces no communication.
Here's whats in zmd-messages.log after a couple of refreshes:
[DEBUG] [03/12/2014 08:12:34.048] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ParseArgs] [] []
[DEBUG] [03/12/2014 08:12:34.064] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ProcessCommand] [] []
[DEBUG] [03/12/2014 08:12:34.064] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Processing Command for handler cache-clear] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Finished Processing Command for handler cache-clear. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ProcessCommand. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ParseArgs. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to StopDisplaySpinner()] [] []
[DEBUG] [03/12/2014 08:12:39.586] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ParseArgs] [] []
[DEBUG] [03/12/2014 08:12:39.586] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ProcessCommand] [] []
[DEBUG] [03/12/2014 08:12:39.586] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Processing Command for handler refresh] [] []
[DEBUG] [03/12/2014 08:12:39.648] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [ResendLocationUpdate : -1] [] []
[DEBUG] [03/12/2014 08:12:39.726] [1428] [ZenworksWindowsService] [30] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Finished Processing Command for handler refresh. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ProcessCommand. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ParseArgs. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to StopDisplaySpinner()] [] []
[DEBUG] [03/12/2014 08:12:48.682] [1428] [ZenworksWindowsService] [33] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:11:00.435] [1428] [ZenworksWindowsService] [6] [] [ZenCache] [] [SqliteConnection:Setting for Asynchronous IO operation to sqlite DB read from registry is null so setting it to default to true] [] []
[DEBUG] [03/12/2014 08:11:17.117] [3192] [ZenUserDaemon] [1] [] [ZenCache] [] [SqliteConnection:Setting for Asynchronous IO operation to sqlite DB read from registry is null so setting it to default to true] [] []
[DEBUG] [03/12/2014 08:11:21.362] [3288] [explorer] [1] [] [ZenCache] [] [SqliteConnection:Setting for Asynchronous IO operation to sqlite DB read from registry is null so setting it to default to true] [] []
[DEBUG] [03/12/2014 08:34:23.928] [1428] [ZenworksWindowsService] [10] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:34:29.511] [1428] [ZenworksWindowsService] [52] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:35:04.998] [1428] [ZenworksWindowsService] [34] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:36:50.438] [1428] [ZenworksWindowsService] [29] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
I sort of have the impression that ZAA actually is working (the services are running) but something else blocks the connection. However, Windows fw is closed and no av software is present.
Uninstall - reinstall of ZAA normally solves the problem, but this is not very practical and the situation can appear anytime on basically any ws, after which the ws remains in this state. The situation is particularly annoying on desktops with DLU, where the ws is practically useless in this state.

Originally Posted by wtbt
Lately we have seen more and more of this phenomenon that seems to have been described earlier but I cannot find any clear solution anywhere.
ZAA is 11.2.3.24691 MU1 or 11.2.4.3271. Happens to ws that are known to have been working ok. ZAA properties goes almost blank, except Agent status show correct IP-address, Device state Managed. Configuration location says Default location, should be something else. Server properties Unavailable, Closest servers no available, no policies, no bundles.
zac ref "completes" in half a second but nothing happens. If device still has the IP-address that was known to ZEN it shows up green, otherwise "Unable to connect...".
Wireshark shows little communication with ZEN-servers and only when ws uses same IP-address as is known to ZEN. A refresh produces no communication.
Here's whats in zmd-messages.log after a couple of refreshes:
[DEBUG] [03/12/2014 08:12:34.048] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ParseArgs] [] []
[DEBUG] [03/12/2014 08:12:34.064] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ProcessCommand] [] []
[DEBUG] [03/12/2014 08:12:34.064] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Processing Command for handler cache-clear] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Finished Processing Command for handler cache-clear. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ProcessCommand. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ParseArgs. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:34.126] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to StopDisplaySpinner()] [] []
[DEBUG] [03/12/2014 08:12:39.586] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ParseArgs] [] []
[DEBUG] [03/12/2014 08:12:39.586] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [Before call to ProcessCommand] [] []
[DEBUG] [03/12/2014 08:12:39.586] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Processing Command for handler refresh] [] []
[DEBUG] [03/12/2014 08:12:39.648] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [ResendLocationUpdate : -1] [] []
[DEBUG] [03/12/2014 08:12:39.726] [1428] [ZenworksWindowsService] [30] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [ZMD] [] [Finished Processing Command for handler refresh. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ProcessCommand. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to ParseArgs. Result = SUCCESS] [] []
[DEBUG] [03/12/2014 08:12:40.179] [1428] [ZenworksWindowsService] [30] [] [CLM] [] [After call to StopDisplaySpinner()] [] []
[DEBUG] [03/12/2014 08:12:48.682] [1428] [ZenworksWindowsService] [33] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:11:00.435] [1428] [ZenworksWindowsService] [6] [] [ZenCache] [] [SqliteConnection:Setting for Asynchronous IO operation to sqlite DB read from registry is null so setting it to default to true] [] []
[DEBUG] [03/12/2014 08:11:17.117] [3192] [ZenUserDaemon] [1] [] [ZenCache] [] [SqliteConnection:Setting for Asynchronous IO operation to sqlite DB read from registry is null so setting it to default to true] [] []
[DEBUG] [03/12/2014 08:11:21.362] [3288] [explorer] [1] [] [ZenCache] [] [SqliteConnection:Setting for Asynchronous IO operation to sqlite DB read from registry is null so setting it to default to true] [] []
[DEBUG] [03/12/2014 08:34:23.928] [1428] [ZenworksWindowsService] [10] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:34:29.511] [1428] [ZenworksWindowsService] [52] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:35:04.998] [1428] [ZenworksWindowsService] [34] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
[DEBUG] [03/12/2014 08:36:50.438] [1428] [ZenworksWindowsService] [29] [] [Settings Module] [] [Settings could not be refreshed on the device. Service Manager returned null on a call to enumerate services.] [] []
I sort of have the impression that ZAA actually is working (the services are running) but something else blocks the connection. However, Windows fw is closed and no av software is present.
Uninstall - reinstall of ZAA normally solves the problem, but this is not very practical and the situation can appear anytime on basically any ws, after which the ws remains in this state. The situation is particularly annoying on desktops with DLU, where the ws is practically useless in this state.
We seen this also on some workstation, zac cc, zac ref and then a restart usually solved it. Have not seen this error anymore after we updated to 11.2.4MU1.
Thomas

Strange problem with zen micro (I'm going mad!!

merry xmas!! I've bought a zen micro in seprember, flashed with .xx firmware; I always used it with windows 2000 with no problem, but... problems began when I've installed a pci card usb 2.0 on my pc; the card worked finely with everything but not with zen micro, that's to say that everytime I tried to import songs by media explorer, the program often wasn't able to import songs; so I've installed windows xp and flashed zen micro with 2.xx firmware (I've installed also service pack 2 and wmp0), but things have gone wrong!!! now everytime I connect zen micro to pc, xp asks the drivers, and it doesn't want neither the driver I've found on creative's cd, nor drivers downloaded from creative's site!! And it's not finished: now zen micro is without firmware and everytime I'm trying to flsh it, a dialogue box says that the player is not connect!!!
can anybody help me? otherwise I'll have to write to creative support for a substitution...
please help me!!!!!

Strange. Unfortunately MTP connection problems are very tricky to solve. It's hard to know whether the firmware upgrade was partially successful, and whether you are on v or v2 firmware. It sounds like v2 firmware, due to the connection problems with MTP.
The drivers for the v2 firmware are provided by Windows Media Player 0, and are located in the C:\WINDOWS\INF directory. You could try pointing there.
As the player has no firmware though you have to go into recovery mode, choose "reload firmware", then connect to the PC (see if it's detected) and run the firmware update again.
If this doesn't work try and find another PC, say a friend's, that meets the requirements of Win XP + SP/2 + WMP0, and see if you can update.
In terms of resolving the connection problem if it continues, have a look at this thread, particularly the reply by DM, which goes through some of the troubleshooting to solve MTP connection problems. Also look for the link "problems with connecting using MTP firmware" in the FAQ post.

Tp finished with return code: 208

Hi Basis Gurus,
I have received transport data and cofiles from system XYZ. I have copied data and cofiles in /usr/sap/trans/data and /usr/sap/trans/cofiles respectively.
Now I have change my directory to /usr/sap/trans/bin
I want to see the Object List before I import the transport request to my test system TST. I have added the transport request XYZK92????? to buffer with tp addtobuffer command and it is successful. Now when I am trying to see the Object list with command tp GETOBJLIST it is giving error message
This is tp version 340.16.12 (release 640)
System XYZ is not defined in TPPARAM
ERROR: System XYZ is not defined in TPPARAM
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
XYZ system is the system from where I got the transport request and it is not defined in my STMS domain. I guess we can import transport request from any other SAP system.
How to resolve this issue ? is any one aware of this.
Thanks
Best Regards,
CK

I have created the TPPARAM with the above entry. Now getting different error:
~
This is tp version 340.16.12 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBSWPATH is no longer used.
This is R3trans version 6.13 (release 640 - 12.12.05 - 14:24:42).
1AETW065 check-sum error in datafile after "1972" bytes.
2EETW000 Please contact the SAP support.
exiting ...
R3trans finished (0016).
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
WARNS: Highest tp internal warning was: 0101
tp finished with return code: 16
meaning:
A tool used by tp broke down

Random Problems with Zen Micro? Try a diff. USB cable

I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
Hope this helps - I am (now) loving my new Micro!

I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
My old Zen Micro with the old, original firmware did NOT have this connectivity problem
Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

HT201269 Hi. I have recently finished with an emplyer and have backed up my phone and when i go to restore the back to another phone it is asking me to turn off the "find my iphone" before the restor can start. Pronlem is im no longer in possesion of this

Hi. I have recently finished with an emplyer and have backed up my phone and when i go to restore the back up to another phone it is asking me to turn off the "find my iphone" before the restore can start. Pronlem is im no longer in possesion of this phone and can not turn it off.
Any assistance would be great

It's not referring to your old phone, it's referreing to the one you're trying to restore to. Where did you get the phone you're trying to restore the backup to?

Trouble with ZEN MX

Trouble with ZEN MXWHi,
I have some issues with my zen mx,? primarily sometimes when I listen to a playlist containing many tracks or "all tracks", my player sometimes shuts of and then have to scan the disk pefore working.
Secondly there are small pauses during playback, maybe every third track or more, I'm only talking about something like a thenth of a second but it's still very annoying. This also occurs when I have many tracks in my playlist.
Thirdly I'm not able to access the recovery mode, I've tried following the instructions from the sticky-thread in the forums (Turn on player and hold in the reset butto). However when I do, the screen goes black and no recovery mode appears ever if I hold down the button for a long time.
Anyone knows how th fix theses issues?
thanks,
/Kvick

Kvick,
Please follow these steps to access the recovery mode. If this is not working for you, please feel free to contact Customer Support for further assistance.

DC creation finished with some problems

Hello,
After finish the DC creation below message is getting
DC Creation finished with some problems
Reason: Some used DC's not avilable Locally, You Have to sync used DC's for the project.
and when I open the view implementation many errors in the default methods.
below is the error log:
java.lang.Exception: C:\Users\xxxx\.dtc\LocalDevelopment\buildvariant.config is missing
at com.sap.ide.eclipse.component.core.Util.getBuildVariantDocument(Util.java:205)
at com.sap.ide.eclipse.component.core.Util.initBuildVariant(Util.java:261)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:432)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:372)
at com.sap.ide.eclipse.cbs.activation.internal.ActivationRuntimeDataStorage.setActiveDevelopmentConfiguration(ActivationRuntimeDataStorage.java:225)
at com.sap.ide.eclipse.cbs.activation.internal.ActivationRuntimeDataStorage.onActiveClientChanged(ActivationRuntimeDataStorage.java:944)
at com.tssap.dtr.client.lib.vfs.config.impl.Configuration.setActiveClient(Configuration.java:477)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.updateDTR(DevConfWizard.java:687)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:546)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
at com.sap.ide.eclipse.component.wizard.DevConfWizard$1.run(DevConfWizard.java:348)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.sap.ide.eclipse.component.wizard.DevConfWizard.performFinish(DevConfWizard.java:346)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.eclipse.component.provider.actions.DevConfNewAction.run(DevConfNewAction.java:46)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Thanks
Polaka

Hi Polaka,
the Error clearly tells the root cause...
Some used DC's not avilable Locally, You Have to sync used DC's for the project.
This means that the DC for which you have created project structure is now present on your Local client DTR, but the same DC is using some other DCs as dependencies. And these used DC(s) are not available on your Local Client DTR.
Please perform the below mentioned steps...
1) The DC for which you are creating the project structure, is having dependecies on other DCs.
2) Open the public parts of that DC and check the Used DCs that are needed.
3) You need to create the project structure of those used DCs too from Inactive DCs view.
4) Also make sure that buildtime depencies are also sychronized from Active DC view.
If the problem still persists, then i would request you to provide the following details.
1) Types of the DCs that you are using.
2) in the CBS web UI,
-->(http://<host>:<port>/webdynpro/dispatcher/sap.com/tc.CBS.WebUI/WebUI)
-->Here, find out the build spaces specific to your track inside Buildspaces Table.
<SID>_<TrackName>_D
check the Development buildspace of your track whether it is consistent or not?
3) If the build space is having some broken DCs then provide the Logs of the Build failure on CBS for those broken DCs.
Regards,
Shreyas Pandya

I am finished with one of my email accounts, how do I save all the messages for future reference?

I have several accounts on my home PC, and I have finished with one of them. How do I store every message on this account for later possible reference? Attachments and all?

You could move them into folders in Local Folders.

Problem with ZEN Style M300

When I trying to found bluetooth audio devices with ZEN Style M300,? the player get to freeze after a little bit time that is searching devices, and so I have to push the reset button for using again the player. :mansurprised:Anyone have the same problem?

I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over.

OFFLINE BACKUP finished with error

Dear all,
please find the below Offline backup log
BKI0400I: TDP is waiting for BRBACKUP.
BR0280I BRCONNECT time stamp: 2010-03-05 22.05.33
#BEGIN /oracle/IRP/sapdata3/undo_1/undo.data1
BR0280I BRCONNECT time stamp: 2010-03-05 22.05.33
BR0345E Error in backup utility while switching the status of file /oracle/IRP/sapdata3/undo_1/undo.data1
BR0280I BRCONNECT time stamp: 2010-03-05 22.05.33
BKI0412E: BRBACKUP wasn't able to switch requested tablespace in BEGIN/END BACKUP mode.
BKI0412E: BRBACKUP wasn't able to switch requested tablespace in BEGIN/END BACKUP mode.
BKI9203E: Additional support information: An exception was thrown at position: /home/builder/autobuild/TSM_mySAP_BUILD/xint/library/base/esd-countedpointer.hpp(221).
( esd-exception.cpp(113): )
esd-sessionmanager.cpp(548):
esd-sessionmanager.cpp(529):
esd-sessionmanager.cpp(388):
esd-task.cpp(292):
esd-sessionmanager.cpp(350):
esd-datamover.cpp(300):
esd-datamover.cpp(280):
backint.cpp(156):
BKI9309E: Operation terminated due to an explicit abort request.
BKI9300E: Additional support information: Aborting 'send' operation. See previous error.
BKI0405I: TDP waited 115 sec. for BRBACKUP in util_file_online communication.
BKI0020I: End of program at: Fri Mar 5 22:05:49 IST 2010 .
BKI0021I: Elapsed time: 02 min 26 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2010-03-05 22.05.49
BR0279E Return code from '/usr/sap/IRP/SYS/exe/run/backint -u IRP -f backup -i /oracle/IRP/sapbackup/.becsivwc.lst -t file_online -p /oracle/IRP/102_64/dbs/initIRPweekly.utl -c':
BR0232E 0 of 47 files saved by backup utility
BR0280I BRBACKUP time stamp: 2010-03-05 22.05.49
BR0231E Backup utility call failed
BR0278I Command output of '/usr/sap/IRP/SYS/exe/run/brconnect':
BR0801I BRCONNECT 7.00 (34)
PID=512432
BR0280I BRCONNECT time stamp: 2010-03-05 22.05.33
BR0345E Error in backup utility while switching the status of file /oracle/IRP/sapdata3/undo_1/undo.data1
BR0280I BRCONNECT time stamp: 2010-03-05 22.05.33
#ERROR
BR0280I BRCONNECT time stamp: 2010-03-05 22.05.50
#SIGNAL CAUGHT: 15
BR0074W BRCONNECT call failed
BR0280I BRBACKUP time stamp: 2010-03-05 22.05.51
BR0304I Starting and opening database instance IRP ...
BR0280I BRBACKUP time stamp: 2010-03-05 22.05.58
BR0305I Start and open of database instance IRP successful
BR0056I End of database backup: becsivwc.aff 2010-03-05 22.05.49
BR0280I BRBACKUP time stamp: 2010-03-05 22.05.58
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2010-03-05 22.05.58
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20100305220322 -d util_file -c force -p initIRPweekly.sap -cds'
BR0280I BRBACKUP time stamp: 2010-03-05 22.10.06
BR0292I Execution of BRARCHIVE finished with return code 0
reg

Dear Bhavik G. Shroff,
kindly check the below outpot
SQL> select file#, status, name from v$datafile;
     FILE# STATUS
NAME
         1 SYSTEM
/oracle/IRP/sapdata1/system_1/system.data1
         2 ONLINE
/oracle/IRP/sapdata3/undo_1/undo.data1
         3 ONLINE
/oracle/IRP/sapdata1/sysaux_1/sysaux.data1
     FILE# STATUS
NAME
         4 ONLINE
/oracle/IRP/sapdata1/sr3_1/sr3.data1
         5 ONLINE
/oracle/IRP/sapdata1/sr3_2/sr3.data2
         6 ONLINE
/oracle/IRP/sapdata1/sr3_3/sr3.data3
     FILE# STATUS
NAME
         7 ONLINE
/oracle/IRP/sapdata1/sr3_4/sr3.data4
         8 ONLINE
/oracle/IRP/sapdata1/sr3_5/sr3.data5
         9 ONLINE
/oracle/IRP/sapdata2/sr3_6/sr3.data6
     FILE# STATUS
NAME
        10 ONLINE
/oracle/IRP/sapdata2/sr3_7/sr3.data7
        11 ONLINE
/oracle/IRP/sapdata2/sr3_8/sr3.data8
        12 ONLINE
/oracle/IRP/sapdata2/sr3_9/sr3.data9
     FILE# STATUS
NAME
        13 ONLINE
/oracle/IRP/sapdata2/sr3_10/sr3.data10
        14 ONLINE
/oracle/IRP/sapdata3/sr3_11/sr3.data11
        15 ONLINE
/oracle/IRP/sapdata3/sr3_12/sr3.data12
     FILE# STATUS
NAME
        16 ONLINE
/oracle/IRP/sapdata3/sr3_13/sr3.data13
        17 ONLINE
/oracle/IRP/sapdata3/sr3_14/sr3.data14
        18 ONLINE
/oracle/IRP/sapdata3/sr3_15/sr3.data15
     FILE# STATUS
NAME
        19 ONLINE
/oracle/IRP/sapdata4/sr3_16/sr3.data16
        20 ONLINE
/oracle/IRP/sapdata4/sr3_17/sr3.data17
        21 ONLINE
/oracle/IRP/sapdata4/sr3_18/sr3.data18
     FILE# STATUS
NAME
        22 ONLINE
/oracle/IRP/sapdata4/sr3_19/sr3.data19
        23 ONLINE
/oracle/IRP/sapdata4/sr3_20/sr3.data20
        24 ONLINE
/oracle/IRP/sapdata1/sr3700_1/sr3700.data1
     FILE# STATUS
NAME
        25 ONLINE
/oracle/IRP/sapdata1/sr3700_2/sr3700.data2
        26 ONLINE
/oracle/IRP/sapdata1/sr3700_3/sr3700.data3
        27 ONLINE
/oracle/IRP/sapdata1/sr3700_4/sr3700.data4
     FILE# STATUS
NAME
        28 ONLINE
/oracle/IRP/sapdata2/sr3700_5/sr3700.data5
        29 ONLINE
/oracle/IRP/sapdata2/sr3700_6/sr3700.data6
        30 ONLINE
/oracle/IRP/sapdata2/sr3700_7/sr3700.data7
     FILE# STATUS
NAME
        31 ONLINE
/oracle/IRP/sapdata2/sr3700_8/sr3700.data8
        32 ONLINE
/oracle/IRP/sapdata3/sr3700_9/sr3700.data9
        33 ONLINE
/oracle/IRP/sapdata3/sr3700_10/sr3700.data10
     FILE# STATUS
NAME
        34 ONLINE
/oracle/IRP/sapdata3/sr3700_11/sr3700.data11
        35 ONLINE
/oracle/IRP/sapdata3/sr3700_12/sr3700.data12
        36 ONLINE
/oracle/IRP/sapdata4/sr3700_13/sr3700.data13
     FILE# STATUS
NAME
        37 ONLINE
/oracle/IRP/sapdata4/sr3700_14/sr3700.data14
        38 ONLINE
/oracle/IRP/sapdata4/sr3700_15/sr3700.data15
        39 ONLINE
/oracle/IRP/sapdata4/sr3700_16/sr3700.data16
     FILE# STATUS
NAME
        40 ONLINE
/oracle/IRP/sapdata1/sr3usr_1/sr3usr.data1
        41 ONLINE
/oracle/IRP/sapdata4/sr3700_17/sr3700.data17
41 rows selected.

Offline Backup got error Status Finished with error

Dear all ,
OS AIX , DB Oracle , SAP ECC6.0 , Tivoli Storage Manager
Offline Backup got error Status shows Finished with Error   (Backups are fired through DB13)
Retune Code :0005 Error during processing
Detail Logs:
BKI0027I: Time: 12/10/09 05:19:06 Object: 47 of 47 in process: /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf Size: 14.422 MB, MGMNT-CLASS: WEEKLYMGM
BKI5005E: Tivoli Storage Manager Error:
ANS1312E (RC12)   Server media mount not possible
BKI1208W: The object '/oracle/IRP/origlogA/cntrl/cntlrIRP.dbf' will be retried [4].
BKI0027I: Time: 12/10/09 05:19:38 Object: 47 of 47 in process: /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf Size: 14.422 MB, MGMNT-CLASS: WEEKLYMGM
BKI5005E: Tivoli Storage Manager Error:
ANS1312E (RC12)   Server media mount not possible
BKI1231E: Maximum number of retries for file /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf exceeded.
BR0233E Backup utility has reported an error while saving file /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.07
#END /oracle/IRP/origlogA/cntrl/cntlrIRP.dbf
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.07
BR0304I Starting and opening database instance IRP ...
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.26
BR0305I Start and open of database instance IRP successful
BR0280I BRCONNECT time stamp: 2009-12-10 05.20.26
BKI1215I: Average transmission rate was 237.735 GB/h (67.622 MB/sec).
BKI1227I: Average compression factor was 1.000.
BKI0405I: TDP waited 497 sec. for BRBACKUP in util_file_online communication.
BKI0020I: End of program at: Thu Dec 10 05:20:33 IST 2009 .
BKI0021I: Elapsed time: 02 h 20 min 31 sec .
BKI0024I: Return code is: 2.
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.33
BR0279E Return code from '/usr/sap/IRP/SYS/exe/run/backint -u IRP -f backup -i /oracle/IRP/sapbackup/.beccdcmb.lst -t file_online -p /oracle/I
BR0232E 0 of 47 files saved by backup utility
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.33
BR0231E Backup utility call failed
BR0056I End of database backup: beccdcmb.aff 2009-12-10 05.20.33
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.35
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2009-12-10 05.20.35
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20091210030000 -d util_file -c force -p initIRPweekly.sap -cds'
BR0280I BRBACKUP time stamp: 2009-12-10 05.23.07
BR0292I Execution of BRARCHIVE finished with return code 5
regards

Hi,
> BKI5005E: Tivoli Storage Manager Error:
> ANS1312E (RC12)   Server media mount not possible
Have you checked tape is properly mounted on TSM ?
Check below guide on page 69.
http://www.redbooks.ibm.com/redbooks/pdfs/sg246554.pdf
Thanks
Sunny
Edited by: Sunny Pahuja on Dec 12, 2009 12:25 PM

Problem with SAX parser - entity must finish with a semi-colon

Hi,
I'm pretty new to the complexities of using SAXParserFactory and its cousins of XMLReaderAdapter, HTMLBuilder, HTMLDocument, entity resolvers and the like, so wondered if perhaps someone could give me a hand with this problem.
In a nutshell, my code is really nothing more than a glorified HTML parser - a web page editor, if you like. I read in an HTML file (only one that my software has created in the first place), parse it, then produce a Swing representation of the various tags I've parsed from the page and display this on a canvas. So, for instance, I would convert a simple <TABLE> of three rows and one column, via an HTMLTableElement, into a Swing JPanel containing three JLabels, suitably laid out.
I then allow the user to amend the values of the various HTML attributes, and I then write the HTML representation back to the web page.
It works reasonably well, albeit a bit heavy on resources. Here's a summary of the code for parsing an HTML file:
      htmlBuilder = new HTMLBuilder();
parserFactory = SAXParserFactory.newInstance();
parserFactory.setValidating(false);
parserFactory.setNamespaceAware(true);
FileInputStream fileInputStream = new FileInputStream(htmlFile);
InputSource inputSource = new InputSource(fileInputStream);
DoctypeChangerStream changer = new DoctypeChangerStream(inputSource.getByteStream());
changer.setGenerator(
   new DoctypeGenerator()
      public Doctype generate(Doctype old)
         return new DoctypeImpl
         old.getRootElement(),
                          old.getPublicId(),
                          old.getSystemId(),
         old.getInternalSubset()
      resolver = new TSLLocalEntityResolver("-//W3C//DTD XHTML 1.0 Transitional//EN", "xhtml1-transitional.dtd");
      readerAdapter = new XMLReaderAdapter(parserFactory.newSAXParser().getXMLReader());
      readerAdapter.setDocumentHandler(htmlBuilder);
      readerAdapter.setEntityResolver(resolver);
      readerAdapter.parse(inputSource);
      htmlDocument = htmlBuilder.getHTMLDocument();
      htmlBody = (HTMLBodyElement)htmlDocument.getBody();
      traversal = (DocumentTraversal)htmlDocument;
      walker = traversal.createTreeWalker(htmlBody,NodeFilter.SHOW_ELEMENT, null, true);
      rootNode = new DefaultMutableTreeNode(new WidgetTreeRootNode(htmlFile));
      createNodes(walker); However, I'm having a problem parsing a piece of HTML for a streaming video widget. The key part of this HTML is as follows:
            <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
              id="client"
        width="100%"
        height="100%"
              codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
              <param name="movie" value="client.swf?user=lkcl&stream=stream2&streamtype=live&server=rtmp://192.168.250.206/oflaDemo" />
         etc....You will see that the <param> tag in the HTML has a value attribute which is a URL plus three URL parameters - looks absolutely standard, and in fact works absolutely correctly in a browser. However, when my readerAdapter.parse() method gets to this point, it throws an exception saying that there should be a semi-colon after the entity 'stream'. I can see whats happening - basically the SAXParser thinks that the ampersand marks the start of a new entity. When it finds '&stream' it expects it to finish with a semi-colon (e.g. much like and other such HTML characters). The only way I can get the parser past this point is to encode all the relevant ampersands to %26 -- but then the web page stops working ! Aaargh....
Can someone explain what my options are for getting around this problem ? Some property I can set on the parser ? A different DTD ? Not to use SAX at all ? Override the parser's exception handler ? A completely different approach ?!
Could you provide a simple example to explain what you mean ?
Thanks in anticipation !

You probably don't have the ampersands in your "value" attribute escaped properly. It should look like this:
value="client.swf?user=lkcl&stream=...{code}
Most HTML processors (i.e. browsers) will overlook that omission, because almost nobody does it right when they are generating HTML by hand, but XML processors won't.

Import finished with few errors...Help understanding it!

Hi all,
Yesterday, I finished to do an import in oracle. I used the impdp command and got few errors after the import was done. Here are some bits from my log. It was very long but I shortened it with the most common errors. I would appreciate your help understanding what does each error mean, and whether there's a solution available.
Thanks!
El sql que falla es:
CREATE TABLESPACE "SYSAUX" DATAFILE SIZE 125829120 LOGGING ONLINE PERMANENT BLOCKSIZE 16384 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MANAGEMENT AUTO
ORA-39083: Fallo de creación del tipo de objeto TABLESPACE con el error:
ORA-02236: nombre de archivo no válido
El sql que falla es:
CREATE TABLESPACE "IN_SGC_BD" DATAFILE '+DISKGROUP_BD/sgtc/datafile/rsgtc_in_sgt_bd1' SIZE 132120576 LOGGING ONLINE PERMANENT BLOCKSIZE 16384 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MANAGEMENT MANUAL
Procesando el tipo de objeto DATABASE_EXPORT/PASSWORD_VERIFY_FUNCTION
ORA-31684: El tipo de objeto PASSWORD_VERIFY_FUNCTION ya existe
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39111: Se ha saltado el tipo de objeto dependiente OBJECT_GRANT:"SYSTEM", ya existe el tipo de objeto base SEQUENCE:"SYSTEM"."SDE_LOGFILE_LID_GEN"
ORA-39083: Fallo de creación del tipo de objeto SYNONYM con el error:
ORA-00995: falta el identificador de sinónimos o no es válido
BEGIN
dbms_resource_manager.create_consumer_group('AUTO_TASK_CONSUMER_GROUP','System maintenance task consumer group','ROUND-ROBIN');COMMIT; END;
Procesando el tipo de objeto DATABASE_EXPORT/SYSTEM_PROCOBJACT/POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Fallo de creación del tipo de objeto PROCACT_SYSTEM con el error:
ORA-29393: el usuario JAIMESP no existe o no está conectado
El sql que falla es:
BEGIN
dbms_resource_manager.create_plan_directive('PLAN_DIA','SGTC_USR','',30,NULL,NULL,NULL,NULL,NULL,NULL,NULL,30,600,5,'SGTC_SWITCH',NULL,TRUE,NULL,10240,1800,900,1800);
dbms_resource_manager.create_plan_directive('PLAN_DIA','SGTC_EDITOR','',40,NULL,NULL,NULL,NULL,NULL,NULL,NULL,10,600,10,'SGTC_SWITCH',NULL,TRUE,NULL,512000,1800,600,3600);
dbms_r
ORA-39083: Fallo de creación del tipo de objeto PROCACT_SYSTEM con el error:
ORA-06550: línea 2, columna 72:
PLS-00103: Se ha encontrado el símbolo "CHECK" cuando se esperaba uno de los siguientes:
in like like2 like4 likec between member submultiset
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39151: La tabla "OUTLN"."OL$" existe. Todos los metadados dependientes y los datos se saltarán debido table_exists_action de saltar
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
. . "SIGELEC"."SDE_BLK_37" 4.976 KB 0 filas importadas
. . "SIGELEC"."SDE_BLK_38" 4.968 KB 0 filas importadas
. . "SGC_BD"."BDE_CRECOBJE" 5.234 KB 0 filas importadas
. . "SIGELEC"."D418" 4.851 KB 0 filas importadas
. . "SYSTEM"."DBM_TOPSQL" 6.125 KB 0 filas importadas
. . "SIGELEC"."F100" 5.562 KB 0 filas importadas
. . "SIGELEC"."F101" 5.593 KB 0 filas importadas
. . "SIGELEC"."F102" 14.77 KB 11 filas importadas
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/PROCEDURE/ALTER_PROCEDURE
ORA-39082: El tipo de objeto ALTER_PROCEDURE:"SYSTEM"."GEN_ROLE_SGTC" se ha creado con advertencias de compilación
ORA-39083: Fallo de creación del tipo de objeto PACKAGE_BODY con el error:
ORA-04052: se ha producido un error al consultar el objeto remoto ENLACE.ELPQ_DATOPROY@CRE
ORA-00604: se ha producido un error a nivel 4 de SQL recursivo
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
ORA-39082: El tipo de objeto TRIGGER:"SIGERED"."TR_CTRL_ENERGIZA" se ha creado con advertencias de compilación
ORA-39083: Fallo de creación del tipo de objeto TRIGGER con el error:
ORA-04052: se ha producido un error al consultar el objeto remoto ENLACE.ELPQ_DATOCONS@CRE
ORA-00604: se ha producido un error a nivel 4 de SQL recursivo
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
El sql que falla es:
ALTER TRIGGER "SIGERED"."TR_CTRL_ENERGIZA" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSCOPE_SETTINGS= 'IDENTIFIERS:NONE'
ORA-39082: El tipo de objeto TRIGGER:"SIGERED"."TR_CTRL_CONCLUYE" se ha creado con advertencias de compilación
El sql que falla es:
BEGIN SYS.DBMS_IJOB.SUBMIT( JOB=> 165, LUSER=> 'SYSTEM', PUSER=> 'SYSTEM', CUSER=> 'SYSTEM', NEXT_DATE=> TO_DATE('2012-05-02 01:00:00', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'TRUNC(SYSDATE+1)+1/24', BROKEN=> FALSE, WHAT=> 'dbms_stats.gather_schema_stats(ownname => ''SIGERED'',options => ''GATHER'',estimate_percent => null,method_opt => ''FOR ALL COLUMNS SIZE 1'',cas
ORA-39083: Fallo de creación del tipo de objeto JOB con el error:
ORA-00001: restricción única (SYS.I_JOB_JOB) violada
El sql que falla es:
BEGIN SYS.DBMS_IJOB.SUBMIT( JOB=> 47, LUSER=> 'SIGERED', PUSER=> 'SIGERED', CUSER=> 'SIGERED', NEXT_DATE=> TO_DATE('2012-05-02 01:00:00', 'YYYY-MM-DD:HH24:MI:SS'), INTERVAL=> 'TRUNC(SYSDATE+1)+01/24', BROKEN=> FALSE, WHAT=> 'SIGERED.RDPQ_PROYECTOS.PR_PROCESAR;', NLSENV=> 'NLS_LANGUAGE=''AMERICAN'' NLS_TERRITORY=''AMERICA'' NLS_CURRENCY=''$'' NLS_ISO_CURRENCY=''AMERI
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
Procesando el tipo de objeto DATABASE_EXPORT/SCHEMA/PASSWORD_HISTORY
ORA-39083: Fallo de creación del tipo de objeto PASSWORD_HISTORY con el error:
ORA-01858: se ha encontrado un carácter no numérico donde se esperaba uno numérico
El trabajo "SYS"."SYS_IMPORT_FULL_01" ha terminado con 2249 error(es) en 17:21:02

Hello people,
I just run for the second time a full import, and it said it finished correctly.
The first time I run it, there was a message which said that the import had finished with 2249 errors (I checked my log and not all of them were errors but messages). I checked each single message and only had to solve a couple of things.
I first created a user in response to an ora-29393: user string does not exist or is not logged on.
The second thing I did was to run the utlrp.sql file in response to an ORA-39082. I did this according to this blog.
I know oracle is taking precedence each time I run an import. I don’t know if what I have done is okay or perhaps not all data was imported after all. This is the thread which I posted initially when errors came out.
Any reply is a supply.
Thanks loads

Problems With Zen Touch Turn

After just recently purchasing a Zen Touch in December 2005, I already have problems with it.
I have never dropped it or hit it. I plugged it in to re-charge one day after using it and when it was done charging I turned it on, used it for 5 minutes then set it down. The next morning I went to turn it on to use it, and it wouldn't turn on. The blue light at the side on the power button was on, but the screen just wouldn't show up. Now the blue light won't turn off. I have read about these problems with Zen Micro freezing up and read about Zen Touch freezing up back in 2004 when it was released. I have phoned the number but couldn't seem to get through. Should I consider taking it in? Or is there an easier way?

Have you tried resetting it's Connect to the mains adapter and press the tiny recessed button on the side of the player. Don't use anything sharp to press it, a bent paper clip is best.

Finished with Zen Mi

Similar Messages

Maybe you are looking for