Finishing from a digital source

a friend of mine shot some footage using a still camera in photo-jpg.
i'm on a pokey powerpc, so i transcoded the footage given to me to dv so i could work in real time(color correction, etc). i've got the cut, so now i have to finish this thing with the original photo-jpg master. what is the best way to go about this? export an xml file and search and replace the dv footage? i'm looking for an automated workflow, one that doesn't require me to do alot of supervision(and editing the xml file is kinda complicated, frame dimensions, etc) - is this possible?
any suggestions are much appreciated! thanks in advance!

Are you asking how to get files from this mini recorder onto your Mac?
Once the files are actually on the Mac, and assuming they're in a format GB can import (WAV, AIFF, mp3, or aac), then we can help you get those files into garage band.
You'll have to read the documentation that came with your recorder on how to transfer files to the Mac first.
You'll note this is the Garage Band forum, not the BOSS micro BR forum

Similar Messages

Inputting from a digital source (mini recorder - -BOSS micro BR)

I have recorded original song tracks on a mini recorder and want to input the song into Garage band. The project chooser window does not give me any options for inputting digital sources, so I am at a complete loss as to how to begin. I am not recording a voice or any of the instruments shown.... the "HELP" does not indicate how to do this. At least I have not found it, so the "Help" is not much help..This is my very first time at using Garage Band, and am already stymied. Can someone please give me 3 basic steps to get the song into Garage Band? Thanx.

Are you asking how to get files from this mini recorder onto your Mac?
Once the files are actually on the Mac, and assuming they're in a format GB can import (WAV, AIFF, mp3, or aac), then we can help you get those files into garage band.
You'll have to read the documentation that came with your recorder on how to transfer files to the Mac first.
You'll note this is the Garage Band forum, not the BOSS micro BR forum

Recording audio from a digital source on sound blaster M

This is my setup: DVD player > optical cable > optical-in on Sound Blaster MP3+
I'm trying to record the STEREO (not 5. or DTS) audio off a DVD I have, but it won't record or playback anything on either the SPDIF input or Wave/MIDI/CD input when selected. Everything else works fine (analog, line-in, etc.). Another thing I noticed is that all of the inputs seem to be connected to my built-in regular laptop microphone. When I press record in any .wav recording program, I can hear my voice/other background noise.

The issue I see with iTalk and similar iPod apps is that the iPod has no line-level input, so you'd have to use one of the earbud/microphone combinations or an external microphone like this one which will be limited as to quality. There are some other options here. But if you want pro quality, and particularly want to tap straight off of a mixing console, a device like the Alesis is going to be necessary, though there may be something less expensive that I can't find.
If a microphone works for you, then iTalk might be fine. There's a freeware version of iTalk, iTalk Lite, you can try, to see if it will do the job. It doesn't have the advanced playback controls and has a limit of 2MB per recording, but it should allow you to test it out. Voxie is another possibility.
Regards.

I cannot download photos from my digital camera to Iphoto (version '09). I have been able to successfully do this up to 4 days ago but not yesterday. My camera/device is recognized in the Source List but photos won't download for me to import to library.

I cannot download photos from my digital camera (via a cable) to Iphoto (version '09). I have been able to do this successfully up til 4 days ago but not yesterday (Dec. 25th). My camera/device is recognized in the Source List, but when it tries to download the photos, all I get are the words "Loading Photos" in the area where the thumbnail pictures usually display. The little "gear" symbol next to the words but it just goes round and round. Nothing ever downloads, and instead of showing me how many pictures there are to import it just says "No photos". So therefore I cannot import the photos to my library since they won't even download.
I was getting an error message a few days ago that my Iphoto library was getting full, so I emptied my trash in both Iphoto and on my computer. I had this same problem back in October and emptying the trash and getting rid of some photos did help (can I really be using that much storage space for the pictures?). But it didn't help this time.
Any suggestions as to what to do to solve the problem? I would try taking the SD card out and inserting that into the slot on the computer to see if I could load pictures that way; but the last time I did that, they wouldn't load. Not sure if I lost pics from the disc or not.
Thank you,
Novice50

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Error in Previewing data from a UD Source System

Hi,
I have created a data source from a UD Source System; however, when I preview data, I am prompted by this message:
"Inbound processing of data package 000001 finished"
There is no error, but there is also no data preview that is displayed.
Can you help me with my problem?
I look forward to your reply experts!
Regards,
Ramon

Hi,
sampling is out of a directory placed on the CLIENT. On runtime the directory must be placed on the SERVER.
So you must have two locations: one for sampling (*local) and one for (*remote) and before deployment you must switch from _local to _remote.
The _remote location points to a directory on the SERVER, don't forget to grant read/write privileges to the oracle user on the file system.
Regards,
Detlef

Delta Extraction from 0ASSET_AFAB data source

Hi All,
I reinstalled the data source 0ASSET_AFAB_ATTR and 0ASSET_AFAB_TEXT data sources for delta feature.
When i tried to extract the delta its gave the error message RSM 340 ( full and delta init was successful).
I implemented the OSS notes 599896 ,613273 but no luck.
Could you please kindly help me if some one already successfully extracting the delta from this data source.
( Full load is killing our production system its taking more than 90 min to finish)
Its seems this data source supports delta type "AIE" .
Could you please some body put some light on this.
Kind Regards
Martin Leo
Message was edited by: Martin Leo

Hello Martin,
the error is pointing to a problem on the source system. So you have to look in R/3. Run the extractor checker in R/3 using transaction RSA3.
It took me a while to figure this one out. Here are the steps you should follow:
1) In R/3 activate the BAdi FIAA_BW_DELTA_UPDATE in transaction SE19 if it is not active.
2) Now run a delta init (with data transfer!) for 0ASSET_ATTR_TEXT (and not 0ASSET_AFAB_TEXT).
3) Once this is successful, do a delta init for 0ASSET_AFAB_ATTR again with data transfer.
4) Now you can load 0ASSET_AFAB_TEXT and finally the 0FI_AA* transaction data. Also the deltas for the master data should work now.
Regards,
Marc
SAP NetWeaver RIG, US BI
PS: After each step you can check in table BWOM2_TIMEST on R/3 if a delta init was successful.

I need to count intermittent high speed pulses from an outside source with cFP-CTR-502 and labview.

I need to count intermittent high speed pulses from an outside source with cFP-CTR-502 and Labview 8.2 . I've found example code for generating pulses and creating intricate count setups but no straightforward examples of a simple counter. Any suggestions?

Hello tinfish,
I could not find a simple example that implements simple counting either, but it should be straightforward enough for us to try. Do you have the CTR module configured properly in MAX? If so, can you monitor the channels on your CTR 502 for input? Try connecting a square wave or some other digital pulse to the terminal to test the functionality of the counter module first (before programming). If you monitor the input channels with somethign connected you should see the count increment each time it sees a rising edge (assuming default configuration).
Once you've verified that everything works in MAX, you can set up your CTR module in a LV 8.2 project. If you need help with this, refer to the help document (look in the "Configuring FieldPoint in LabVIEW" section):
C:\Program Files\National Instruments\FieldPoint\documentation\Online Help\fplv.chm
You should be able to just read a channel tag from your CTR 502 using an FP Read VI. (Simply drag the channel from your project onto the block diagram). Since counting is the default behavior of the 502, there is no special programming involved to make it work.
I hope this helps -- if it's too high-level we can talk details about specific questions you have. Have a good one!
Charlie S.
Visit ni.com/gettingstarted for step-by-step help in setting up your system

How to record from an external source

I recently bought a hp envy 17" and I cant figure out how to record onto this laptop. I have to jacks on the left side, one with an icon of a headphones, the other with an icon of a headset. I want to be able to take input a stereo jack to record into one of these and record into a program like Audacity. Under device manager it says I have an ATI High Def Audio Device. How do I record from an external source? Thanks.

@toolchic, first make sure that in the IDT HD Sound properties [right click the IDT ICON near the clock, which says "Controls IDT Audio Settings" on mouse over the icon], and choose "Open Audio control panel".
Next choose "Recording > Settings". Here choose the input you want to record with. In your case choose "Integrated Microphone Array" on the top left. Click "Settings" just bellow, slide the bar to "10db boost" on the right, and slide the recording level bar about midway up [at the bottom of the window where all the volume controls for all recording devices are].
While you/re there, it's a good idea to mute the "External mic", and mute any other recording device that you do not need. Next, click the "Processing" tab below the settings tab, and choose "Reduce noise". Leave all the others unchecked. for these will produce a not so nice sound. This helps to eliminate fan noise and other background noise in your recording.
Now when you open your preferred digital audio program e.g.. Audacity [it's free and pretty easy to use, see link below], you can choose the INTEGRATED MIC ARRAY in the recording options. Choose that and then "arm" the track for recording [Usually an icon with R in the recording controls] Next click "record" to begin recording. Of course these steps depend on the digital audio recording program you're using.
If you don't have a dedicated digital audio recording program, and if you have windows 7 or vista, you can record long sessions with the default Microsoft recording program [this program is useless in XP, for it only records for like a minute or so, maximum!. A dedicated program such as Audacity records depending on how much hard drive disk space, or close to that.
@fritz, in essence, input jacks of most current notebooks, external computer mics are mono, but they use a stereo mini jack [or 3 band, if I understood you correctly]. These are the same as regular earphone jacks. One band is signal, one is earth, and the other is +5 Volts to drive the condenser [these are known as "condenser mics"]. But if you use a dedicated studio type recording mic, then you need a dedicated preamp, and if it is a condenser as apposed to a dynamic mic, the preamp needs to supply what's known as "phantom power" [typically 45v] through the input jack where the mic is plugged into.
However, if you record from the mic in/line in jack of a line out of say a mic preamp, channel mixer deck, CD/DVD/TV etc., then this has to be a stereo mini jack [has 3 bands]. Special cables with 2 [stereo] RCA jacks to mini jack are the ones to use. That is if the line out connector of your recording course is RCA [your typical TV/CD//DVD audio / video out or in are RCA connectors e.g..].
Did this help?
http://audacity.sourceforge.net/download/
be-well

Capturing From Two Different Sources

Hello, how reliable is it to capture from two different sources using the following sceario:
1. Powerbook G4 15" Using the digital optical audio input for sound and using the DV 1394 Input for DV video
2. In FCP, selecting "Digital Optical Input" for AUDIO and DV for video
3. Hit capture now since it is going to be recorded live
Any thoughts folks?
Trying to avoid bying the firestore $8,000 solution

Hi,
I don't see any problems in that scenario - if your disc is fast enough, that is! I've never worked with a G4 Powebook but in theory, it all comes down to the spped of the storage you have. The safest scenariio, az suggested above, would be to try it beforehand. You should also considerthe length of the live recording as opposed to the disc space you have. I don't know about the "firestore" solution but a firewire "LaCie" external disc is a cheap solution and it works fine with the G4 Powebook. Another issue is what FCP compressor to use during capture! Try it!

Anyone have a problem with the HDMI port suddenly not recognizing any digital source imput signal?

I have an HP 2711x monitor.
Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
Thanks.

Hello Largelee,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
'Input out of Range' Error After a Recovery or Upgrading to Windows 7
Monitor is Blank
Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Simple creation of Update Rule from BW Data Source

Hi guys,
 Pertaining standard SAP Business Content extractors
 I am referring to InfoCube : 0PA_C01(Headcount and Personnel Actions)
 I am attempting to create an Update Rule from Info Source : 0HR_PA_PA_1(Headcount)
 This Info Source : 0HR_PA_PA_1(Headcount) is connected to BW Data Source(Not R/3!) 0HR_PA_PA_1
 I have created an Info Package for this Info Source and managed to get 15 records{In Contrast to my 68800 Records from Info Source : 0HR_PA_0(Employee)}
 So, when I create an Update Rule to Connect Info Cube: 0PA_C01(Headcount and Personnel Actions) to Info Source to Info Source : 0HR_PA_PA_1(Headcount), I get the following error
ERROR : IC=0PA_C01 IS=0HR_PA_PA_1 error when checking the update rules
Could you please also advice, why do I only get 15 records for Data Source 0HR_PA_PA_1 ?
P/S : I am on BW 3.5

Hey Rohini,
 This Data Source: 0HR_PA_PA_1(Headcount) is tricky to me because it`s a BW Data Source.
 Exact Error Message is as follows :-
"Error Message : RSAU461
 IC=0PA_C01 IS=0HR_PA_PA_1 error when checking the update rules "
 My Exact Problem is that I don`t see any values for the following fields in my Info Cube : 0PA_C01(Headcount and Personnel Actions)
Country;
Country Code;
Gender;
Nationality;
Language;
Postal Code;
Region;
Position;
Job;
Payroll Area;
Payroll Group;
Pay Scale's;
Pay Grade's
This is because, this information is supplied by InfoSource : 0HR_PA_PA_1
But I don`t have an Update Rule for this InfoSource in my InfoCube : 0PA_C01
So, that's why I am attempting to create this additional Update Rule
 And also, could someone enlighten me why would SAP not include such a standard Update Rule when they have already idenfied those needed fields in a Cube ? This is suppose to be a STANDARD workable Business Content right ?
P/S: I have applied Note : 336229

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."

I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELP

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

How to load data into an ods from multiple info sources.

hi all...
i am given a task to load data into an ods from 3 infosources ...
can someone plz give me the flow .
thank u in advance..

Hi Hara Pradhan,
You have to create 3 update rules by giving the 3 different infosources while creating each update rule. And u have to create the infopackages under each infosource. with this u can load the data to the same data target from multiple info sources.
Hope it helps!
Assign points if it helps!

I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources. How do I enable my iPhone to do it? Tks in advance.

I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources into my iPhone (it's presently receiving msgs from only one of them). How do I enable my iPhone to do it? Tks in advance.

Many thanks for your help!

Finishing from a digital source

Similar Messages

Maybe you are looking for