FINSTA inbound idocs - "Error during insert in table FEBKO"

Can anyone tell me , y this error comes?
I am using File to IDOC scenario.
I need to update bank statement. It can be given in multiple pages. I need to update depending upon the date as well as its page number.
Sometimes I get this error. Can anyone tell me , because of what reason I get this error?

One reason is when multiple statement files are being processed parallelly, table may get locked and gives this error.

Similar Messages

ME-807 System error: error during insert in table EKKO in SM13

Hello Experts,
I have been searching a lot in SDN and in google about the ERROR ME-807 System error: error during insert in table EKKO but still i have not got any satisfactory answer.
In ME31K when I create the contract and put some validation check on target value filed in BADI Implementation ME_PURCHDOC_POSTED while saving it .
Now after rectfying the valdiation checks and saving the contract again i get this ERROR in SM13 and i can not even see the contract in ME33K. It says that doument does not exist.
Please let me know what could be the possible reason for this.
Thanks,
Naveen

Hi Jan,
This ERROR is coming from a function module ME_CREATE_DOCUMENT .
The code snippet from where this error s comin is as below:-
DATA: LS_EKUB_NEW TYPE EKUB.
DATA: L_EBELP     LIKE IND_EKKI-EBELP,
        L_TABIX     LIKE SY-TABIX,
        L_TABIX_1   LIKE SY-TABIX,
        L_EHP4_P2PSE_ACTIVE TYPE XFELD.
------- Bestellkopf hinzufuegen -
MOVE NEKKO TO EKKO.
INSERT EKKO.
IF SY-SUBRC NE 0.
    MESSAGE A807 WITH 'EKKO'.
ENDIF.
Thanks,
Naveen

ME 807: System error: error during insert in table KONV

Hi,
I got the below error when creating PO using ME21N, what should I do?
ME 807: System error: error during insert in table KONV
Thanks.

During the creation of Purchasing Orders the system displays the message "Error during insert in table KONV". The problem is solved and I would like to share the steps we use to solve the problem.
You can get details of the error in the Business Workplace (T-Code SBWP) or through the transaction SM13. The details of the error are:
Function Module
ME_CREATE_DOCUMENT
Status
Update was terminated
Report
LEINUU03
Row
167
Message
ME807 System error: error during insert in table KONV
I applied the SAP Note 1610553 - BAPI_PO_CHANGE: Header conditions are not transferred which describes exactly the problem but it was not solved.
The solution was creating a new Purchasing Record and, before saving, remove all the conditions in Header level and save the document. After that, it's possible to create documents without problem.

1 duplicate key error during insert into table

Dear Guru's
While upgrading the SAP_HR patch, I am facing this issue
Current level is SAPKE60455
Trying to apply patch - SAPKE60456
This is seen in the import log
Start import R3TRVDATV_512W_O ...
client 000:   1
client 001:   1
client 070:   1
client 080:   1
client 100:   1
client 320:   1
1 duplicate key error during insert into table T512T occured
End import R3TRVDATV_512W_O (with warnings)
Please help, thank in advance
R3trans is at version 6.19
Regards,
Omkar

Hello,
Issue was resolved after upgrading the R3trans
Regards,
Omkar

MS05 transaction throws "SQL error: error during INSERT (table: &)"

Hi Team,
I am a BASIS engineer on MM system. we have a strange problem from customers we see an error on the MS05 screen with "SQL error: error during INSERT (table: &)" and when the support team runs MS01 transaciton this error gets resolved.
What I would like to know is what could be the likely cause of this error and how we can prevent it.
When I check the SM21 logs i noticed one log with "Transaction cancellation 61 204 ( PLAF )"
and under additional document section is the log I see the below information
Usually, the reason for this error is that an entry already exists
with the same key.
This problem can occur if the client was copied with the movement data
without adjusting the number range intervals.
Please check if the number ranges for this table have been set
correctly and, if necessary, correct the number range interval.
I am from BASIS and I have no clue in how the MM transactions are linked can any MM gurus help in identifying the root cause for this problem.
any help on this is highly appreciated
thanks
Vijay

Hi
Are MS05 & MS01 you're referring is a T-code?. if so, then they are associated with planning and a PP consultant can give a more clear picture on it. Try posting this to a PP forum.
Based on the error log, i guess this may arise because of the number range problem, when the document is getting saved and record is being tried to inserted into a table.
Thanks
E.Avudaiappan

System Error During Insert (Table KNMT SUBRC 4)

Hi All,
I am getting a peculiar error when i try to update KNMT table using the FM RV_CUSTOMER_MATERIAL_UPDATE.
When i run it directly in debug mode, entries are getting created perfectly.
But when i run it through RFC, before the FM is executed itself, during validation, i am getting an error in the message queue stating "System Error During Insert (Table KNMT SUBRC 4).
I cheked that KNMT table is empty. Also i had deleted all entries using the standard transaction VD52.
I found that there is a certain FM RV_CUSTOMER_MATERIAL_UPDATE_C which is described as Posting program for customer-material info (CALL mode).
But i am not sure what this does. I cannot view the documentation in my system and also this FM does not have any parameters.
Kindly let me know if anyone has encountered an error like this... Please let me know of any suggestions for resolution.
Thanks & Regards,
Mz
P.S : The Functionality seems to work intermittently... though not when i want it.
Edited by: Mazin Mahmood on Dec 8, 2011 9:09 AM

Hi,
The issue was that i was calling the function module RV_CUSTOMER_MATERIAL_UPDATE using an RFC.(ABAP Proxy) For some reason, while using an RFC, there is some issue with this function module and the database commit .
I had to recode using BDC (for transaction vd51) approach for creating a record in KNMT.
Thanks All,
Cheers,
Mz

ME11 update error : Error during insert EINE with key

HI All,
I am facing the below problem..For one particular user update request is failing in ME11 transaction.Error was found in function module name ME_UPDATE_INFORECORD.I also check if it is number range problem but it is not the case..
Please help me out..
Thanks in advacne.

Hi,
The problem is that only one user is getting sporadic failed update messages (since last 3-4 days) when using transaction ME11. The error as recorded in SM13 is "Error during insert EINE with key <Inforecord #> <Pur Org>".
I checked the table EINE for the key mentioned in the above message and found that there is a 2 years old record with the same key. Now, what I do not understand is that while creating a new Inforecord, why does SAP comes up with an old number instead of generating a new one from the number range object. I tried to search on SDN as well as OSS Notes, but could not find any mention to this problem.
And yes, it is an abend message with no short dump...
Thanks,
Gaurav
Edited by: Gaurav Malhotra on Feb 24, 2012 3:08 PM

Reference document 83246316 000020 (Error during Insert)

I am abap developer and my func person told me that he is trying to create the Billing document 83246316 in VF01 and we are getting the following error (Reference document 83246316 000020 (Error during Insert)). Can anyone lemme know how to solve this issue.

Do you think this would be the issue
XVBRP_KEY = XVBRP.
READ TABLE XVBRP WITH KEY XVBRP_KEY BINARY SEARCH.
CASE SY-SUBRC.
WHEN 4.
INSERT XVBRP INDEX SY-TABIX.
WHEN 8.
APPEND XVBRP.
WHEN OTHERS.
MESSAGE A004 WITH VBAP-VBELN VBAP-POSNR. <<<<<
ENDCASE.
The error occurs due an incorrect SY-SUBRC after reading table XVBRP
(SY-SUBRC not equal to 4 or 8). This means that the content of work area
XVBRP is inconsistent.
The problem is caused by a wrong source code in user exits or custom
copy routine. Please check in programs RV60AFZZ, RV60AFZA, RV60AFZB,
RV60AFZC, and RV60AFZD if you change the content of work area XVBRP.
Please make the same check also in the eventual customized routines
set in copy control.

Inbound IDOC error 51 Application Document not posted

Inbound IDOC error 51: Item: 002 Goods/Service number not entered So application document not posted.
Please help me out

hi
check whether service number is available in the idoc if not check the field mapping

ORA-022887 error during insert operation how to handle properly ...

Hello everyone I got an error during insert operation how to handle it properly ?
SQL statements given below.
INSERT INTO PERSONEL.TRANSLATIONS (TID,SCRIPT_NAME,TAG,TR,EN,LOCAL)
VALUES ((SELECT PERSONEL.SQX_TID.NEXTVAL AS TID FROM DUAL),'TEST_TEST','TEST','TR','EN','LOCAL');
thank you

I could not find an error like ORA-022887. What is the exact error you are getting? Do a cut and past of the error here.
Ok the proper error is ORA-02287: sequence number not allowed here
As already said just remove the select and use the sequence directly in the insert.
Edited by: Karthick_Arp on Sep 11, 2009 1:04 AM

Error during update of Table VBAP (RC= 4, Key= 5096672)

Hello experts,
i am getting error as
Update was terminated
System ID....   Q70
Client.......   999
User.....   HPROLLSD
Transaction..   VA02
Update key...   4EF9258A885201B1E10080000A140014
Generated....   28.12.2011, 18:08:25
Completed....   28.12.2011, 18:08:25
Error Info...   Error during update of Table VBAP (RC= 4, Key= 5096672)
Please help me on this issue.
Regards
Narendra

Hi,
Relevant issue,go through the link it could be help you.
Express document "Update was terminated" received from author
Ram

Scheduling agreement inbound idoc error.

Hi Experts,
I am creating an Scheduling Agreement with DELFOR02 inbound idoc, while creation the Scheduling Agreement system is giving error regarding Scheduling Agreement not found. In fact I have create the Scheduling agreement by T-code VA31. And I check the table VLPKM, there are relevant record stored.
Then I maintain the view V_T663A to not check everything when inbound idoc recevie. and tried agan in t-code BD87. the system give me another message Make an entry in all required fields.
How can I handle these error messages?
Thanks..
Regards....

Does any one has ideas for that?
Thanks.

Sharing Violation error when inserting a table

Hi Everyone.
I know this question has been asked before but no one seems to have a working solution.
We have Macromedia MX (6.1) installed on a room with windows 7 on all the computers, on a server 2008 network, connectiing to a server 2003 user area server. It seems to work fine until you try to insert a table which is different to the default options. It then throws up a sharing violation error to do with the table.htm file under the Application Data\Macromedia\Dreamweaver MX\Configuration\Objects\Common\ folder. The program then closes. The things I have tried to get this working so far are -
uninstall and reinstall
deletion of the Application Data\Macromedia\Dreamweaver MX\Configuration\ folder
changing location of Application Data\Macromedia\Dreamweaver MX\Configuration\ folder from network drive to local drive
making sure the user has complete ownership of the folder and the file in question. They do
checking the same problem exists with an adminstrator account and a normal user account. It does.
having the user log on to a windows XP machine connecting to the same server with the same log on account. This works fine! So almost certainly a problem with Windows 7.
runnning the dreamweaver program as administrator
changing where the site is saved to.
Im really all out of ideas. Yes i know that its an old version and the newer versions work a lot better, but this is all we have at the moment.
I really appreciate any help!

Hi Chrissy,
According to the description, you were not able to save the workbook after you typo some VBA code. Which version of Office are you using? Are you save it manully?
Based on my understanding, this issue is not realtive to the code and it maybe a know issue about Office 2007. You can fix it via link below:
Description of the 2007 Office system hotfix package (Msoshext-x-none.msp): April 27, 2010
If you still have the issue save it manually, I would suggest that you reopen a new question in
Microsoft Community- Excel forum to get more effective response.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Inbound IDOC error while processing Invoice

Hi All,
I received the following error while processing an Invoice on an inbound IDOC:
Field BSEG-MEINS - does not exist in the screen SAPMF05A 0300
Message no. 00349
Diagnosis
The specified field does not exist on the screen
Procedure
Check your batch input data
Any assistance will be greatly appreciated.
Thanks, Inno

Hi
Please check which G/L Accounts were involved and verify that the Field BSEG-MEINS was set to 'optional' in Transaction OB14. The correct Field Status Variant
for the Company Code can be viewed with Transaction OBY6 and the Field
Status Group for G/L Account can be found with Transaction FS00 under
the Create/bank/inter Tab. This should eliminate the Error 00 349.
Regards
Javier

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

FINSTA inbound idocs - "Error during insert in table FEBKO"

Similar Messages

Maybe you are looking for