FINSTA01 IDOC configuration
Hi Guys,
Just wanted to check what are the configuration required at FI level for FINSTA01 Idoc. Any document will be apppreciated.
my email is [email protected]
bye ... aj
Dear boghendra
check the links
[IDoc Structure |http://help.sap.com/saphelp_46c/helpdata/en/92/58ca56417011d189ec0000e81ddfac/frameset.htm]
[General Construction of the IDoc|http://help.sap.com/saphelp_46c/helpdata/en/1a/0e37cd539911d1898b0000e8322d00/frameset.htm]
thanks
G. Lakshmipathi
Similar Messages
-
IDoc Configuration for Production Order Creation and Change
Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal THi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar -
Idoc configurations in PI7.3
Hi Experts,
For an Idoc scenario prior to PI 7.3, RFC destination, port, logical system and partner profile needs to be created in case of outbound Idoc scenario and again at XI side we need to create RFC destination, port and loading of meta data....
Is the same is applicable for PI 7.3 as well? since Idoc resides in AAE in PI 7.3, I believe there could be some changes applicable for these settings of Idoc....
Pls provide your inputs.....Hi,
Along with the links provided by Phani and Gayatri you can laso refer this thread for IDoc configuration in PI7.3
IDOC settings from sap r/3 to sap pi7.3
IDoc Packaging in PI7.3
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/4096a6b3-3dc3-2d10-bf87-f63d5340a916
Configuring PI 7.30 Java IDoc Adapter
PI/XI: PI 7.3 New Java based IDOC adapter's configuration (sender, receiver) - teaser
IDoc Acknowledments in PI7.3
acknowledge handling for IDOC_AAE in sap PI 7.3
IDoc_AAE acknowledgement handling in PI 7.3
IDoc related error in PI7.3
Processing error in Idoc_AAE sender channel
Hope its informative.
Regards,
Amol -
IDOC configuration in 46C for BI 7
Dear Experts
Is there a set of steps to create the idoc configurations in R/3 for data transfer between R/3 46C and BI 7?
After refresh, the idoc related configurations are lost and BI is unable to load from Source System R/3.
Thanks for reading and hope you can advise on the above.
Best regards
PascalHello Pascal,
Maybe a thread in the PI forum would help you better:
Process Integration (PI) & SOA Middleware
Check the following thread:
Re: interface help
Regards,
Eduardo Rezende -
SAP Lockbox Processing (EDI 823) via FINSTA01 IDoc
I am trying to implement lockbox processing in SAP using the FINSTA01 IDoc. I have not found any documentation regarding the data mapping. Does anybody have experience with this? If so, I could really use a sample data mapping document.
Any help would be appreciated.Hi,
Sorry,
Three times the same URL has copied,
Click to the URL and check :
http://help.sap.com/saphelp_erp2005/helpdata/en/57/f1fc3768b56d00e10000009b38f842/frameset.htm
1) Importing Lockbox Data
2) Postprocess Lockbox Data
This might help you,
http://ifr.sap.com/catalog/query.asp?namespace=urn:sap-com:ifr:FI:470&type=idoc&name=FINSTA01
Regards
Agasthuri Doss -
ALE/ IDOC CONFIGURATION OBJECT
IT'S URGENT
I NEED AN OBJECT IN ALE/IDOC CONFIGURATION SETTINGSHi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM -
Hi Guru's
Can any one of you explain the Idoc configuration steps in brief with t.codes?
rgds,Cherukuri:
<a href="http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli">IDoc Config Guide</a>
In case the link doesn't work:
Google this: "Axel Angeli SAP R/3 guide to Idoc"
Idoc Transactions:
Transaction Code
SALE:Display ALE Customizing
SM59:RFC Destinations (Display/Maintain)
BD64:Maintenance of Distribution Model
BD82:Generate Partner Profiles
WE20:Partner Profiles
WE21:Port definition
WE30:IDoc Type Development ( View Segments of an IDOC )
WE60:IDOC segment field description
WE19:Test tool for IDOC Processing
WE05:IDOC Lists
WE09:Search for IDOC in Database
BD87:Status Monitor for ALE Messages (Process IDOC manually)
BD73:Start Error Handling for Non-Posted IDocs
WEDI:IDOC and EDI Basis
Change Pointers:
BD50:Activate change pointer for message type
BD61:Activate Change pointer generally
BD52:Triggering table and field name
BD21:Creates and sends the Idoc for Change pointer method
BD59:Set the field for Filter in Distribution Model
BD95:Along with BD59 , used for setting a filter in Distribution model
BD60:Assigning FM to the outbound IDOC , and specifying Change pointer Table and Object
BD56:Segment Filtering
Inbound IDOC:
WE81:Create Logical message types
WE82:Assign Messages for IDoc Type
WE31:Development IDoc Segment
WE57:Assignment of FM to Log, Message and IDoc Type
BD51:Characteristics of Inbound FM
WE42:Creating Inbound Process Code
BD67:Function modules for Inbound ALE-EDI
Assign points if info helps Vj -
Idoc configuration in IDES??
hi experts ,
Can somebody explain me about , how do we do entire Idoc configuration in IDES and we can execute the same as sample in IDES
Explain me in step by step for outbound and inbound ...
Thanks
Edited by: MM group on Jul 2, 2010 10:44 AM1 Logical System
2 Assign Logical system
3 RFC
4 Port
5 Customer distribution model
6 Partner profile
7 CDM distribution
Tcode : SALE
First 2 steps not necessary ( Basis work already done )
Two logical system created
Ls110 -Sender
Ls800 - Receiver
RFC
RFC establishment SM59
Receiving system IP address or hostname
System number, client id
Username, password
Ports
We21 define ports
TRFC ale
File Edi
CPI_C - R2 connections
In the port we need to define Port name and RFC destinations
And version
Customer Distribution Model - BD64
Sender
Receiver
Message type
Partner profile we20 , BD62
Partner may be customer, vendor, logical system
In BD62 define the partner system (LS800)
One more additional entry SYNC for synchronization
Post processing Agent - workflow
MATMAS 03 03 is the version
Collect idoc we need to trigger
Transfer idoc will be send immediately
With message control
Which program need to run for generating the idoc
With out message control
For some of the programs have inbuilt idoc generation for that case no need to mention program name
Process code
Distribute CDM
Receiving System:
Partner profile is going to control all the thing
BD64 - > edit - > model view - > distribute
BD67 Function module assigned to the process code
BD10 used to create idoc for material
Master idoc generated only buffered
One master idoc multiple communication idoc
One communication idoc generated
We02 idoc satus -
Hi ,
Are there any standard mappings available for FINSTA file format to FINSTA01 IDOC ?
Regards
SaravanaHi SaravanaKumar
My Name is Ashokkumar
Currently in Denmark. I am in very urgent need of the mapping for EDIFACT FINSTA to SAP R/3 FINSTA01.
I hope you would have somehow managed to get the mapping file. Shall I request you to send me the mapping file I need it very badly now.
Thanks in Advance
Ashok ([email protected])
+0045 23212447 (mobile) -
Hi Gurus,
Please tell me the ALE and Idocs configuration settings
Thnaks in advanceHi,
Please refer to the details mentioned in the hyper-links beow.
You will get the details how to go about it.
To see the IDOC & status check it in WE02/WE05
You will get step by step process.
ABAP Development
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
http://help.sap.com/saphelp_45b/helpdata/en/35/b0ea5187a62488e10000009b38f9b7/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c4/6bc368fef411d28d0900104b56737d/frameset.htm
ABAP Development
Follow below steps to create custom IDOC.
1.Create segments through transaction WE31.
2.Create IDoc Type through transaction WE30 by attaching created segments.
3.Message type through transaction WE81.
4.Link Idoc and message type in WE82 transaction.
Check the transaction WEDI for ALE settings
Check these links for more details on IDoc's:
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
Hope this will help.
Regards,
Priyanka. -
ALE/IDOC configuration study Material
Hi All,
Anyone come across ALE/IDOC configuration study Material which consists of
ONLY ONE PAGE. If YES, Please pass it on.
Points Assured \[but not given. Dont write such statements here anyway!\]
Regards,
Viji.
Edited by: Jan Stallkamp on Aug 6, 2008 2:26 PMHi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM -
ALE/Idoc configuration - (R3--XI--File)
Iam XI developer and know basic ABAP. Client is NOT using any Idocs right now. I have to develop a scenarios ( including ALE/Idoc Configuration on R3 for standard Idocs like MATMAS, DEBMAS, CREMAS etc ) both Master data and change pointer to XI and then to File.
Would some one show me step by step procedures for ALE/Idoc configuration on R3 and XI.I need to send both Master data and incremental data to XI possibly by bundling Idocs to XI.Hi Ram...
Once the mapping is done then re-check the ALE settings.
<b>SAP XI</b>
1) <b>RFC Destination (SM59)</b>
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
<b>2) Create Port (IDX1)</b>
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
<b>3) Load Meta Data for IDOC (IDX2)</b> a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
<b>SAP R/3
1) RFC Destination (SM59)</b>
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
<b>2) Create Port (We21)</b>
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
<b>3) Create Partner Profile (WE20)</b>
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
<b>In SLD System Landscape Directory</b>
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
<b>In Transaction SALE</b>
Define and Assign the logical system name.
Cheers,
raghavesh -
Hi ,
can any one send me step by step ALE/IDOC Configuring please it is very important for me..
Thank's in advance..hi,
check all the below links.......
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
For ALE -- IDoc's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
ALE/ IDOC/EDI
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
for MM
http://help.sap.com/saphelp_nw04/helpdata/en/78/217da751ce11d189570000e829fbbd/content.htm
one more good link
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
~~Guduri -
Sort, sum & preprocess in FINSTA01 IDOC
HI,
I have an issue in lockbox processing.
When data is received from bank into SAP, FINSTA01 idoc gets created in SAPThis idoc contains check details and invoice reference details. There is a preprocessor which sorts and sums invoice references. But, I observed that invoices are not getting sorted and summed in idocs.
Please help me out to find out the reason why this preprocessor is not working as expected.
Thanks & Regards,
Bharath Kumar -
Hi All,
Presently im working on edi, Are there any mappings available for <b>EDI 823 file</b> format to <b>FINSTA01 IDOC ?</b> in EDI
I hope you would have somehow managed to get the mapping file. if u have any related stuff ie: edi823 file to incoming edi ( finsta01 idoc in SAP ). Please send me to
Email [email protected]
Thanks in Advance,
Nirupama reddyNirupama,
Are you able to get the mappings for X12 to FINSTA01. If u did, can you help me with that. my email: [email protected]
Manohar,
The link you gave does not work.
Thanks,
Gopi
Maybe you are looking for
-
I have created a VI to do the following : 1. Get raw data from 4 AI channels once every 50ms. 2. Accumulate these in a 2D array as long as a cycle lasts. 3. At the end of the cycle find the mean of all four arrays and check if they are In-Bound and s
-
Ipod Touch not syncing Win 8 64, iTunes 11
Hi, New install of win 8 64 New install of iTunes 11.0.0.163 iPod Touch original with OS 3.1.3 Whenever I sync music file or videos to this iPod Touch iTunes will hang mid sync. Sometime it hangs close to the beginning and sometimes towards the end.
-
How to embed video in slideshow
Is it possible to embed a video into a slidehsow, like so? http://www.workshare.com Thanks
-
I have had the MIFI6620L for less than a week. It keeps shutting itself off, and I couldn't find any mention of this in the user manual. Perhaps it is a battery saving feature, and not a problem with the unit? This is happening after the battery i
-
Toshiba Tecra R840-00L: Recovery Media & 2010 MS Full Office ??
Hello; 1. I've just bought another Toshiba Notebook: Tecra R840-00L. I'm going through the 20-page abbreviated User Information Guide supplied with the unit. I haven't started the computer yet. There're a couple of concerns, and I'd very much appreci