Fiori Launchpad Designer error 400

Hi,
While configuring launchpad using launchpad designer, I encountered the following error. Attached please find the details of the error. At ICF service, I cannot find any child node of TRANSPORT.
Tags edited by: Michael Appleby

Hi,
Please take a look SAP Fiori LL17 - SAP Fiori launchpad troubleshooting.
I guess SP level is old or the service is not activated.
Regards, Masa
SAP Customer Experience Group - CEG

Similar Messages

Error while creating Catalog in Fiori Launchpad Designer

Hi Experts,
We have installed the new UIX* Fiori components on our NW 7.31 front-end server which has the gateway installed as well. Our backend ERP system is a separate system.
I have activated the OData services /UI2/INTEROP and /UI2/TRANSPORT for the Fiori Launchpad Designer. I am acessing the Launchpad Designer with the URL http://<host>:<port>/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html. (I have activated the ICF service /sap/bc/ui5_ui5/sap/arsrvc_upb_admn).
Now when I try to create a new Catalog (Standard type) by providing Title and ID I am seeing the below error message for POST operation in the PAGE_BUILDER_CUST service in Google Chrome browser:
Our system components are as below:
Can someone let me know how I can resolve this error so that I can create Catalogs in the Launchpad Designer?
Regards,
Saurabh
Tags edited by: Michael Appleby

Hi Saurabh,
Please take a look troubleshooting steps.
SAP Fiori LL17 - SAP Fiori launchpad troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG

Fiori Launchpad Designer configuration issue

Hello All,
Query 1 :
During "Launchpad Designer " configuration when we create Transport requests using scope=CONF to the url and click on "settings" button to create the package , i face the below error:
Error message : "error 400 bad request in Odata response for GET /SAP/OPU/ODATA/UI2/TRANSPORT/PACKAGE/ZLAOMySpend/:HTTP request failed" . Details :package ZXXOMySpend does not exist”
After which we created a new package under SE80 with the same PACKAGE name (ZXXOMySpend) , then when I clicked on “save” the above error was gone.
Is it the right step ?
Query :2
To create a custom role in the gateway system (using PFCG tcode) to add the catalog and assign the role to needed users
Steps followed :
PFCG -->created a role using "single role"
selected "Transaction" and then selected the TYPE "Catalog"
When a popup arrived and selected the catalog created on the Fiori launchpad designer.
Earlier we were using the under transaction "TYPE" as "Catalog Provider" now is it changed to "catalog" ? as we dont see this option on the drop down.
could you please confirm the above?
Thanks,
Usha

Hi Usha,
Please look at help.sap.com. You can find answers.
Creating Transport Requests for User Changes - User Interface Add-On for SAP NetWeaver - SAP Library
Assigning Catalogs to Roles - User Interface Add-On for SAP NetWeaver - SAP Library
Regards, Masa
SAP Customer Experience Group - CEG

Mixed content error for FIORI launchpad designer

Dear team,
I have activated a ERP trial on AWS via CAL. Fiori launchpad and designer opens and works properly but when I am creating new tiles in a catalog, none of information on tile gets saved.
I checked in Chrome console and following error is recorded when saving a tile:
After allowing unsafe scripts, error changed to following:
Any ideas?
Best Regards - Anuraag

Hi Anuraag,
Please open the launchpad designer with http (not https). If you can not logon via http, change the protocol to "Do not switch" in the SICF setting.
Simple steps to configure Fiori Login\Logoff Page
SAP Fiori - SAP Fiori launchpad troubleshooting
Regards,
Masa / SAP P&I Technology RIG

Fiori launchpad designer: missing tile templates

Dear all,
We have installed the PPM Fiori apps on our system; we have managed to get these apps on the launchpad. Now we want to add a custom app to the catalog. If we start the launchpad designer and click on the catalog and then on the "+" to add another tile we should be able to select one of the 4 tile templates. However this page is completely emtpy.
Does anyone have a clue what is missing?
Kind regards,
John.
Tags edited by: Michael Appleby

Hi John,
Have you done deleting cache?
Post processing and Recheck
Having done your changes run the report /UI2/CHIP_SYNCHRONIZE_CACHE and check the errors are not in table /UI2/CHIP_CHDR any longer.
If your changes have not been effective you might have to run report /UI2/DELETE_CACHE_AFTER_IMP to clear the server side cache for PAGES.
Regards, Masa
SAP Customer Experience Group - CEG

Fiori launchpad designer not starting on ERP HANA trial

Dear all,
I would like to start the FLP designer using URL: http://yourip:50000/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html?sap-client=100&sap-language=EN
Trying this ends in:
I have done a search and took a look to: SAP Fiori - SAP Fiori launchpad troubleshooting
but Im not able to find something matching regarding my issue or maybe dont understood something properly. In fact the message is telling me gateway is down, as I got it the demo case should contain anything that needs to run Fiori stuff properly. Did I missed some configuration maybe? Thank you,
regards

Sorry, own fault, client 100 was a bad idea, works well on 102.
cheers

SAP Fiori - Launchpad: Tile Error

Dear Fellow Members,
Currently, while using a custom made theme via UI Theme Designer for Launchpad, we fail to load the same custom made theme to individual tiles. Once any tile is launched, it opens up using the default theme.
Can someone please support us in identifying the way to fix this issue and have the tiles (individual apps) replicate the same theme that is being consumed by the Launchpad? (Hint: where is the Launchpad pulling the Target URL for the tiles from?)
Awaiting reply!
Thank You
Nikisha Singh
SAP Mobility Consultant

Hi Masa,
1) The Action was put Manually - not sure what to fill in that field. Service URL was picked up from Catalogue Administration - Approve Leave Request. See below -
2) See the Target Mapping Screenshot:
3) UIX01HCM - has not been installed. We are at GW 2.0 NW 7.02
Rgds,
Nikisha

Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

Hey Good Fellas,
This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
Ok, let's get down to the Business quickly, shall we?
I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
If you look around the SCN, you will probably hit across these threads and so did I.
http://scn.sap.com/thread/3571448
SAP Fiori - UI Add-on SP09 update troubleshooting
With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
I hope this is going to be a good take-away for others who are having Odata handling issues.
The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
Best Regards,
Akshay

Steve,
If you still have the error, this is what I did to resolve mines.
1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
3) Copy that entire row in a notepad for all the fields
4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
5) Save and give that another try.
This is what I exactly wrote in my solution as well.
Akshay wrote:
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
A screen-shot perhaps helps you more.
Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
Let me know how that goes?
-Akshay

Error in Fiori Launchpad "could not start the app due..."

Hello everyone,
I am having a previously unseen (well, at least for me) error which raises on a click on the tile "Track Purchase Orders" on the SAP Fiori Launchpad:
"Could not start the app due to an internal error" (see the screenshot attached)
I haven't found any help on this error on Google and SAP portals.
The other applications work fine. So did this one before the implementation of SAP_UI 740 SP09 (before that it was SAP_UI 740 SP08). We applied all the notes specified in this post http://scn.sap.com/docs/DOC-56967
Components needed for Track Purchase Orders are patched to their maximum levels (UIX01EAP 100 SP03 and SRA020 600 SP05). OData and UI5 services are activated.
Plus, this error doesn't appear in the Gateway error logs (transaction /iwfnd/error_log) so troubleshooting is difficult.
The issue is systematically reproducible and has been reproduced on several computers.
Thanks a lot if you have any insight about this issue!
Best regards,
Guillaume

Thank you for replying.
I have inspected the element and clicked on the tile. The network tab is below:
The status seems OK.
The response for ResolveLink:
{"d":{"results":[{"__metadata":{"id":"http://<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","uri":"<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","type":"INTEROP.NavTarget"},"id":"PurchaseOrder-track~68","shellType":"FLP","postParameters":"","text":"Track Purchase Order","applicationData":"SAPUI5.Component=ui.s2p.mm.purord.tracking","applicationAlias":"TrackPurchaseOrder","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_purord_tpo"}]}}
I'm surprised that gbapp_poapproval and sra001 OData services are called here (with an intriguing ";mo")... We have found these errors in our /iwfnd/error_log screen after the SAP_UI 740 SP09 patch. Seeing this, we have installed GBAPP002 600 SP6 and SRA001 600 SP4 and activated the OData services but have not tried to use the corresponding apps (meaning that we have not done any other app implementation tasks because we don't really intend to for the moment).
In case the two problems are related, these are the responses to these requests:
For gbapp_poapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB173F121613F0E1008000A87C135A","timestamp":"20140814124456.5404250","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For gbapp_prapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0B1112160FA0E1008000A87C135A","timestamp":"20140814124456.4449070","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For sra001_pcapproval request
{"error":{"code":"SRA001_CMN_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0E4512161140E1008000A87C135A","timestamp":"20140814124456.3244590","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"SRA001_CMN_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
Regards,
Guillaume

Integrate Custom App in Fiori Launchpad - Duplicate ID Error

Hey guys,
I integrated a custom app in the fiori launchpad. The first launch works perfectly. But if I go back via the navigation button and try to start my application again I get following error message:
2015-04-23 23:40:28 adding element with duplicate id 'application-ZCUSTOMFIORIAPP-display_change' -
This is excactly the application name from the url:
http://....../shells/abap/Fiorilaunchpad.html?sap-client=001&sap-language=DE#ZCUSTOMFIORIAPP-display_change
Any ideas how I can solve this?
Thanks and best regards
Chris

in your component
do you have?
destroy : function() {
if (this.oRouteHandler) {
this.oRouteHandler.destroy();
sap.ui.core.UIComponent.prototype.destroy.apply(this, arguments);

Sap Fiori LaunchPad Error

Hi Experts,
I am facing an error when trying to create a tile on fiori launchpad. I have properly configured the roles in Lpd_Cust and in PFCG also done the target mapping.
Error - resource view/Master.view.xml could not be loaded from /sap/bc/ui5_ui5/ui2/ushell/resources/view/Master.view.xml. Check for 'file not found' or parse errors. Reason: NOT FOUND
This application is working properly when tested from eclipse.
Kindly provide the suggestions.
Best Regards

Hi Nayan,
Service URl for dynamic data should have only $count appended in the url u have kept.
Also please provide LPD_CUST launchpad role name.
I hope ZZFIORI_SA is your lpdcust launchpad role and not the pfcg role name.
Also check the Additional information field for proper component.js file. Is it proper ?
Regards,
Tejas

Custom theme with Fiori launchpad

Hi
I have created a custom theme using the theme designer as per detailed in Colorful Fiori - Part 3 - Sea Blue
I can see some changes taking effect in the preview but not all. For e.g. the tile title color, icon color did not change.
When I use the custom theme with the fiori launchpad url, I do not see any of the tiles. Only button I see is the logout button.
I checked in debug, it did show me few 404 errors. wondering why the custom theme works for my ui5 application but not with launchpad url.
Appreciate your help, in identifying what I might be doing wrong.
Thanks
Kalpana
Tags edited by: Michael Appleby

Hi Masa,
Thanks for replying !
We found that our exact issue was resolved in Version 1.1.7 of UI Theme designer (OSS note 1941092) .
So we upgraded our SAP_UI component to SP08 and now we are on version 1.2.2 of UI theme.
I am now able to see the tiles on my Fiori launchpad and the logo I defined in the custom theme. But the custom theme I applied did not get applied to the tiles and the background.
I still see the whole page (Except our company logo) with sap standard sap_bluecrystal theme.
I did the Inspect element, and see that it is still using the standard CSS. Cleared the browser histroy just to make sure that it is not picking the old theme from cache - but with no help.
If I go back to the theme designer and open the custom theme, I can see the csutom theme changes in the preview.
Any help is appreciated.
Thanks
Kalpana

Fiori Launchpad displays a blank screen

My Fiori Launchpad displays a blank screen when running the FioriLaunchpad URL
https://******/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
I installed Fiori and everything appears to be configured ok. I then installed the backend components for Leave Requests (GBHCM002 and GBHCM003). I created a new catalog and group in the launchpad designer and assigned them to my role.
I activated the ICF services, and launchpad services via /iwfnd/maint_service. Services are assigned to LOCAL system alias and browser calls are successful and I see no errors when testing via the gateway client.
ZTRANSPORT
ZQUICKVIEW
ZPAGEBUILDER_SERVICE_V_0_1
ZPAGE_BUILDER_PERS
ZPAGE_BUILDER_CUST
ZPAGE_BUILDER_CONF
ZLAUNCHPAD
ZINTEROP
ZLEAVEREQUEST
The following components are installed and I have a combined frontend and backend system running on SAP ECC 6.0 Ehp7.
SAP_GWFND     740        0009       SAPK-74009INSAPGWFND
SAP_UI 740        0011      SAPK-74011INSAPUI
GBHCM002        600        0014       SAPK-60014INGBHCM002 HCM Employee Requests (Leave)
GBHCM003        600        0012       SAPK-60012INGBHCM003 HCM Manager Approvals (Time, Training,
UIX01EAP          100         0005       SAPK-10005INUIX01EAP    UI for ERP Central Applications
UIX01HCM         100         0005       SAPK-10005INUIX01HCM UI for HCM Application
UIX01TRV          100         0004       SAPK-10004INUIX01TRV   UI for Travel Application
I’ve checked ICM logs, ran the cache jobs and authorisations trace. I’m not seeing any errors anywhere so finding it impossible to troubleshoot
Please help!
Thanks
Amanda

For Approve leave requests :
Business Catalog (Launchpad)
SAP_HCM_BC_MANAGER_X1
Business Group (Launchpad)
SAP_HCM_BCG_MANAGER_X1
PFCG role for Business Catalog
SAP_HCM_BCR_MANAGER_X1
PFCG Role for Technical Catalog
SAP_HCM_TCR_T_X1
For Employee :
Business Catalog (Launchpad)
SAP_HCM_BC_EMPLOYEE_X1
Business Group (Launchpad)
SAP_HCM_BCG_EMPLOYEE_X1
PFCG role for Business Catalog
SAP_HCM_BCR_EMPLOYEE_X1

Site's security certificate is not trusted - in fiori launchpad url

Hi ,
we are using HTTPS protocol in fiori launchpad , when the URL is opened in browser an error or warning comes up , it can be ignored by clicking
proceeding anyway button. in Fiori client for mobile ( android or iOS ) its not showing the page due to this problem.
our URL is a intranet URL ( within companies network ) how can we solve this problem , do we need to purchase any security certificate from some
authority or some configuration is required ?
Regards
Yashpal
Message was edited by: Michael Appleby

The following may also be helpful . Getting Started with Kapsel - Appendix D -- Security
I hope to update this document and the associated Getting Started with Kapsel - Part 8 -- AuthProxy
sections in the next week or two to demonstrate how to use OpenSSL to create a Certificate Authority and use the Certificate Authority to sign certificates.
Regards,
Dan van Leeuwen

Device error: 400

Hi:
I have a 7290 blackberry and I have a serious problem. I was installing many aplications in my blackberry but when I installed the last aplication,It´s appear in the blackberry screen: DEVICE ERROR: 400.
How I can to fix this problem? Thank you for your colaboration.

HI,
Something is wrong with an application that was loaded.
Here is the article for resolve your error 400:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11136&sliceId=SAL_Pub...
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Fiori Launchpad Designer error 400

Similar Messages

Maybe you are looking for