FIORI LAUNCHPAD WAVE2

Hi All,
I have Configured the LaunchPad of the fiori wave2 Apps.It all works well with the intranet but when i try accessing in internet.It give the error
"FAILURE:Unable to load groups".
when i checked it in console i get the following error
1.Failed to load resource: the server responded with a status of 404 (Not Found)
/sap/opu/odata/UI2/PAGE_BUILDER_PERS/PageSets('/UI2/Fiori2LaunchpadHome') was not found on this server.
2.2014-06-22 18:55:45 getGroups failed -
Please suggest.Thanks in advance.
Tags edited by: Michael Appleby

Hello,
we had the same error and fixed it by deleting the OData-Services and reconfigure them again:
Transaction /IWFND/MAINT_SERVICE
Select service ZINTEROP, delete SICF-Nodes (left bottom side), delete systemalias (right bottom side) and (important!) click again on ZINTEROP and choos "delete service".
After that "add service", select your Systemalias, click "get services", choose /UI2/INTEROP and click "add selected services".
We also had to to this procedure for the service "ZTRANSPORT" and "ZPAGE_BUILDER_*"
Good Luck!

Similar Messages

Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

Hey Good Fellas,
This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
Ok, let's get down to the Business quickly, shall we?
I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
If you look around the SCN, you will probably hit across these threads and so did I.
http://scn.sap.com/thread/3571448
SAP Fiori - UI Add-on SP09 update troubleshooting
With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
I hope this is going to be a good take-away for others who are having Odata handling issues.
The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
Best Regards,
Akshay

Steve,
If you still have the error, this is what I did to resolve mines.
1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
3) Copy that entire row in a notepad for all the fields
4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
5) Save and give that another try.
This is what I exactly wrote in my solution as well.
Akshay wrote:
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
A screen-shot perhaps helps you more.
Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
Let me know how that goes?
-Akshay

Error while creating Catalog in Fiori Launchpad Designer

Hi Experts,
We have installed the new UIX* Fiori components on our NW 7.31 front-end server which has the gateway installed as well. Our backend ERP system is a separate system.
I have activated the OData services /UI2/INTEROP and /UI2/TRANSPORT for the Fiori Launchpad Designer. I am acessing the Launchpad Designer with the URL http://<host>:<port>/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html. (I have activated the ICF service /sap/bc/ui5_ui5/sap/arsrvc_upb_admn).
Now when I try to create a new Catalog (Standard type) by providing Title and ID I am seeing the below error message for POST operation in the PAGE_BUILDER_CUST service in Google Chrome browser:
Our system components are as below:
Can someone let me know how I can resolve this error so that I can create Catalogs in the Launchpad Designer?
Regards,
Saurabh
Tags edited by: Michael Appleby

Hi Saurabh,
Please take a look troubleshooting steps.
SAP Fiori LL17 - SAP Fiori launchpad troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG

Site's security certificate is not trusted - in fiori launchpad url

Hi ,
we are using HTTPS protocol in fiori launchpad , when the URL is opened in browser an error or warning comes up , it can be ignored by clicking
proceeding anyway button. in Fiori client for mobile ( android or iOS ) its not showing the page due to this problem.
our URL is a intranet URL ( within companies network ) how can we solve this problem , do we need to purchase any security certificate from some
authority or some configuration is required ?
Regards
Yashpal
Message was edited by: Michael Appleby

The following may also be helpful . Getting Started with Kapsel - Appendix D -- Security
I hope to update this document and the associated Getting Started with Kapsel - Part 8 -- AuthProxy
sections in the next week or two to demonstrate how to use OpenSSL to create a Certificate Authority and use the Certificate Authority to sign certificates.
Regards,
Dan van Leeuwen

Calling ABAP Webdynpro app in FIORI launchpad

Hi All,
Could anyone help me with launching an existing ABAP webdynpro application in FIORI Launchpad.
We just moved to HANA Enterprise Cloud and would like to know how we could launch an existing ABAP Webdynpro application using FIORI Launchpad.
Any help/documentation would be greatly appreciated.
Thanks,
Shiv

Hi,
Please follow instruction defined here - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611a2f-ba23-3210-60b5-d26402db0f2e?QuickLink=index&…

Blank page display while executing Materials & Sales Order App in Fiori Launchpad Sandbox

Hi ,
I am getting blank page while trying to execute Materials app & Sales Order App in Fiori Launchpad Sandbox
Fiori App to App Navigation in Web IDE - Part 1
Kindly help me to resolve this issue.
Regards,
Bharani

Hi Jamie,
Even after recreating the material & salesorder app still getting the same blank page.
For accessing destination (ES1) i used some other credential as i am not able to reset the password of my account since i am getting below for a longtime.
System Down:
The system is not accessible please have a look at the Operations Document for the system status or check back later.
Thank you for your understanding
So does it has any connection related to the blank page which i am getting?
Regards,
Bharani

Custom theme with Fiori launchpad

Hi
I have created a custom theme using the theme designer as per detailed in Colorful Fiori - Part 3 - Sea Blue
I can see some changes taking effect in the preview but not all. For e.g. the tile title color, icon color did not change.
When I use the custom theme with the fiori launchpad url, I do not see any of the tiles. Only button I see is the logout button.
I checked in debug, it did show me few 404 errors. wondering why the custom theme works for my ui5 application but not with launchpad url.
Appreciate your help, in identifying what I might be doing wrong.
Thanks
Kalpana
Tags edited by: Michael Appleby

Hi Masa,
Thanks for replying !
We found that our exact issue was resolved in Version 1.1.7 of UI Theme designer (OSS note 1941092) .
So we upgraded our SAP_UI component to SP08 and now we are on version 1.2.2 of UI theme.
I am now able to see the tiles on my Fiori launchpad and the logo I defined in the custom theme. But the custom theme I applied did not get applied to the tiles and the background.
I still see the whole page (Except our company logo) with sap standard sap_bluecrystal theme.
I did the Inspect element, and see that it is still using the standard CSS. Cleared the browser histroy just to make sure that it is not picking the old theme from cache - but with no help.
If I go back to the theme designer and open the custom theme, I can see the csutom theme changes in the preview.
Any help is appreciated.
Thanks
Kalpana

Fiori Launchpad - Are Catalogs Missing

Hi,
We are doing an install of FIORI, having upgraded our system to EHP 7 - and
SAP_UI 740 0007 SAPK-74007INSAPUI User Interface Technology 7.40.
We use a single server for the moment for the gateway and erp system.
I can access the Fiori apps using the old launchpage screen - no problem, having assigned the relevant Catalog Pages to the relevant roles.
I can access the new Fiori Launchpad and Launchpad Designer also no problem.
However, and maybe my understanding is incorrect here - i was thinking i should see a number of standard catalogs for the standard fiori apps that i could manipulate and assign to groups etc as required. Or this this incorrect? I see nothing new in LPD_CUST - i would have thought there should be new entries here for the various apps to link to ?
Or is it a case these all need to be created from scratch? I have gone through the help documentation a number of times and cannot make out how to generate these even if i need to - exactly what the links between LPD_CUST and a new app within the catalog are. I do have access within the designer to the tile templates but the help is not clear on how to link these to the standard fiori apps.
Am i missing something in the set up? is there further documentation available on the links required.
Thanks
Sinead
Tags edited by: Michael Appleby

Hi Michael,
I don't know - In the help it references the following say, for Approve Requisitions:
Front-End Components
UI5 Application                                MM_PR_APV
Business Role          SAP_MM_BCR_Buyer_X1
Business Catalog       SAP_MM_BC_Buyer_X1
Business Catalog Group
SAP_MM_BCG_Buyer_X1
LPD_CUST Role                         UIX01MM
LPD_CUST Instance     TRANSACTIONAL
But I see no reference to the above elements in my system. I am just wondering are they missing, should they be there? How do i get them there if they are missing and if not, how do i go about creating the require link for new tiles.
Cheers
Sinead

Fiori Launchpad - Basic authentication popup

Hi,
I have used the std. class /UI2/CL_SRA_LOGIN for Fiori launchpad log in screen. When there is no user action for long time and the session cookie gets expired; any operation performed(like selecting an app) in this case is bringing a browser basic authentication popup.
How to avoid this by either taking the user to initial login screen instead of the authentication popup ?
Tags edited by: Michael Appleby

Hi Aakash,
Please upload the screenshot. Is it critical issue or just a nice to have?
From end user point of view, I prefer popup because I can continue the work from the last point. The best is IT sets up SSO.
Regards, Masa
SAP Customer Experience Group - CEG

Fiori Launchpad Menu Control (most recent version)?

Hi All,
Hopefully a really easy question for anyone with the Fiori launchpad sitting in front of them - but I briefly noted how the menu works on the launchpad and want to now implement this in my own app for a menu. Is this a dedicated control, a dialogue box linked to a button or some variation of SplitApp to achieve this? (it was a really quick demo I saw of it, so didn't get enough time to screen capture it).
BTW - I'm not referring to the old menu as seen in this video but the menu in the latest release:
http://www.youtube.com/watch?v=mYbn9Q6P0cU
But the new one which acts like a responsive design Split App menu that hovers over the top (left of centre when selected).
Thanks,
Matt

I did find a runnable equivalent just now, and did some digging/debugging. I'd been curious myself and this was a perfect excuse :-)
Looks like the left-hand menu layout is achieved with this hierarchy:
sap.ui.unified.Shell
|
+-- sap.ui.unified.SplitContainer
         |
        +-- sap.m.Page*
               |
               +-- various 'normal' sap.m controls(List, InputListItem, etc)
*this contains the menu as the 'secondaryContent' aggregation
hth!

Fiori Launchpad displays a blank screen

My Fiori Launchpad displays a blank screen when running the FioriLaunchpad URL
https://******/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
I installed Fiori and everything appears to be configured ok. I then installed the backend components for Leave Requests (GBHCM002 and GBHCM003). I created a new catalog and group in the launchpad designer and assigned them to my role.
I activated the ICF services, and launchpad services via /iwfnd/maint_service. Services are assigned to LOCAL system alias and browser calls are successful and I see no errors when testing via the gateway client.
ZTRANSPORT
ZQUICKVIEW
ZPAGEBUILDER_SERVICE_V_0_1
ZPAGE_BUILDER_PERS
ZPAGE_BUILDER_CUST
ZPAGE_BUILDER_CONF
ZLAUNCHPAD
ZINTEROP
ZLEAVEREQUEST
The following components are installed and I have a combined frontend and backend system running on SAP ECC 6.0 Ehp7.
SAP_GWFND     740        0009       SAPK-74009INSAPGWFND
SAP_UI 740        0011      SAPK-74011INSAPUI
GBHCM002        600        0014       SAPK-60014INGBHCM002 HCM Employee Requests (Leave)
GBHCM003        600        0012       SAPK-60012INGBHCM003 HCM Manager Approvals (Time, Training,
UIX01EAP          100         0005       SAPK-10005INUIX01EAP    UI for ERP Central Applications
UIX01HCM         100         0005       SAPK-10005INUIX01HCM UI for HCM Application
UIX01TRV          100         0004       SAPK-10004INUIX01TRV   UI for Travel Application
I’ve checked ICM logs, ran the cache jobs and authorisations trace. I’m not seeing any errors anywhere so finding it impossible to troubleshoot
Please help!
Thanks
Amanda

For Approve leave requests :
Business Catalog (Launchpad)
SAP_HCM_BC_MANAGER_X1
Business Group (Launchpad)
SAP_HCM_BCG_MANAGER_X1
PFCG role for Business Catalog
SAP_HCM_BCR_MANAGER_X1
PFCG Role for Technical Catalog
SAP_HCM_TCR_T_X1
For Employee :
Business Catalog (Launchpad)
SAP_HCM_BC_EMPLOYEE_X1
Business Group (Launchpad)
SAP_HCM_BCG_EMPLOYEE_X1
PFCG role for Business Catalog
SAP_HCM_BCR_EMPLOYEE_X1

Fiori Launchpad for SRM Apps

Hello,
I am bit confused here.
This is the first time I am implementing SAP Fiori standard app in central hub deployment scenario.
I am trying to implement SAP SRM apps (My Shopping Cart and Approve Shopping Cart).We are now in the phase of preparing the System Landscape for the same. As we are using the central hub deployment approach, we have two servers in picture. One is G10 for SAP Netweaver Gateway and another one is SR2 for SAP SRM Business Suite.
Now in G10 which is acting as the Front-end for our scenario we have the following components installed:
In SR2 which is acting as the ABAP Back-end server for our scenario we have the following components installed:
Also we have created the trusted RFC between SR2 and G10 servers.
Now I have the following queries:
1. In which server do we have to configure the Fiori Launchpad?
2. In which server do we have to activate the app specific OData services?

Adding to Chandrashekhar Mahajan
Fiori Launchpad will always be in your frontend server : Gateway server. Also I don't see IW_PGW component in your G10 server. This is required for approval scenarios (approve shopping carts)
Fiori/Ui5(ushell)
|
Gateway server (Activate all ui and odata services in SICF)
|
Backend server
For all other information : All Things SAP Fiori
Regards,
Tejas

Fiori Launchpad suddenly got empty

Hello ,
The fiori launchpad was working fine until today (the UI add on was patched couple of weeks ago to SP11. We are trying to integrate it into portal and today i went ahead and implemented the noclickjacking fiorilaunchpad.html
Tested again and the direct fiorilaunchpad was fine and i could see my apps and tiles
After may be 15 mins i tried to open the fiori LP and i get completely blue screen with nothing on it (like nothing is assigned). If i click on tile catalog it finds absolutely nothing. I have tried it with different users - still empty.
I have checked and there are no errors in error_log not in slg1,
A direct call for approve requisition app http://xxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html?sap-client=100&sap-language=EN#PurchaseRequition displays the correct data and i can see several requisitions that need to be approved.
So i think it is not related to roles and authorizations.
A user that has admin gateway and ui admin role can not delete the group from homescreen - if i click on it and want to drag it nothing appears down right It was also working before
The frontend has been restarted, icm cache and browser cache cleared as well, the odata services were deactivated and activated again.
The admin url works fine too.
I have also tried reverting to the original launchpad.html file but it makes no difference the problem persists
Any ideas?
P.S i have implemented the notes for SP11 and have been through the launchpad troubleshooting guide but may be i am missing something...

2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Chip
core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported
    at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
    at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
    at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
    at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
    at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
    at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Chip
core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported
    at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
    at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
    at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
    at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
    at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
    at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Chip
core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported
    at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
    at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
    at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
    at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
    at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
    at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Chip
core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported
    at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
    at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
    at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
    at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
    at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
    at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Chip
core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported
    at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
    at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
    at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
    at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
    at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
    at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
    at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
    at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
core-min-0.js:91 2015-02-16 17:51:03 Applauncher Tile not loaded completely - sap.ushell_abap.adapters.abap.LaunchPageAdapter
core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: Applauncher Tile not loaded completely - sap.ui2.srvc.Error: Applauncher Tile not loaded completely
    at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
    at isTileIntentSupported (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/us…ary-preload.json/sap/ushell_abap/adapters/abap/LaunchPageAdapter.js:2:6120)
    at isTileIntentSupported (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:118708)
    at sap.ui.base.EventProvider.extend._getTileModel (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:72286)
    at sap.ui.base.EventProvider.extend._getGroupModel (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:69888)
    at sap.ui.base.EventProvider.extend._loadGroup (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:69478)
    at Object.<anonymous> (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:68982)
    at t (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-0.js:32:24634)
    at Object.v.add [as done] (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-0.js:32:25027)
    at sap.ui.base.EventProvider.extend.loadGroupsFromArray (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:68898) sap.ui2.srvc
core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: Applauncher Tile not loaded completely - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
In the table /UI2/CHIP_CHDR i see this entry Failed to read UI2 CHIP configuration for CHIP name X-SAP-UI2-CHIP:AR_SRVC_NEWS. RC: 0 Path WebContent/WebContent/newstile.xml not found in SAPUI5 application ar_srvc_news
When i run the delete cache report the entries in the above table don't disappear though

Fiori Launchpad integration in Portal Rendering issues

Hello Guru's, I have created UI5 iview by copying the Web Dynpro Application com.sap.portal.appintegrator.sap - UI5 and pasted in to the folder where I am creating the iview. with in the content SAP UI5 gave the relative path as :/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html? And in the Navigation Menu- selected the option: Display in separate headerless portal window (standard mode) Now when trying to Preview or open the role it is not rendering(both in IE and Chrome) the Launchpad. It is displaying a blank screen. And we are the latest version available in the market on the patches and all the fiori related components. Please help. Thanks, Pramod
Tags edited by: Michael Appleby

Hello All,
Here is the reply from SAP on the issue:
Currently, the Fiori Launchpad is not designed/supported to be
consumed in another container as the Portal. (We implemented " Anti
Click Jecking Protection" which block this load).
With UI-Add-On SP09 and the NW Portal version 731 SP13/ 740 SP8 we
will enable also consumption of FLP via SAP portal or direct call to
specific Fiori applications
with the option to remove elements from header as the logo or
non-relevant buttons.
For now we are using Launchpage which was created as a URL iView and working fine without any issue.
Thanks,
Pramod

Error in Fiori Launchpad "could not start the app due..."

Hello everyone,
I am having a previously unseen (well, at least for me) error which raises on a click on the tile "Track Purchase Orders" on the SAP Fiori Launchpad:
"Could not start the app due to an internal error" (see the screenshot attached)
I haven't found any help on this error on Google and SAP portals.
The other applications work fine. So did this one before the implementation of SAP_UI 740 SP09 (before that it was SAP_UI 740 SP08). We applied all the notes specified in this post http://scn.sap.com/docs/DOC-56967
Components needed for Track Purchase Orders are patched to their maximum levels (UIX01EAP 100 SP03 and SRA020 600 SP05). OData and UI5 services are activated.
Plus, this error doesn't appear in the Gateway error logs (transaction /iwfnd/error_log) so troubleshooting is difficult.
The issue is systematically reproducible and has been reproduced on several computers.
Thanks a lot if you have any insight about this issue!
Best regards,
Guillaume

Thank you for replying.
I have inspected the element and clicked on the tile. The network tab is below:
The status seems OK.
The response for ResolveLink:
{"d":{"results":[{"__metadata":{"id":"http://<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","uri":"<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","type":"INTEROP.NavTarget"},"id":"PurchaseOrder-track~68","shellType":"FLP","postParameters":"","text":"Track Purchase Order","applicationData":"SAPUI5.Component=ui.s2p.mm.purord.tracking","applicationAlias":"TrackPurchaseOrder","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_purord_tpo"}]}}
I'm surprised that gbapp_poapproval and sra001 OData services are called here (with an intriguing ";mo")... We have found these errors in our /iwfnd/error_log screen after the SAP_UI 740 SP09 patch. Seeing this, we have installed GBAPP002 600 SP6 and SRA001 600 SP4 and activated the OData services but have not tried to use the corresponding apps (meaning that we have not done any other app implementation tasks because we don't really intend to for the moment).
In case the two problems are related, these are the responses to these requests:
For gbapp_poapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB173F121613F0E1008000A87C135A","timestamp":"20140814124456.5404250","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For gbapp_prapproval request
{"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0B1112160FA0E1008000A87C135A","timestamp":"20140814124456.4449070","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
For sra001_pcapproval request
{"error":{"code":"SRA001_CMN_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0E4512161140E1008000A87C135A","timestamp":"20140814124456.3244590","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"SRA001_CMN_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
Regards,
Guillaume

FIORI LAUNCHPAD WAVE2

Similar Messages

Maybe you are looking for