Fiori Leave Approval App -  Scenario Defenition Error

When I execute the Leave approval service in browser I get the below error, maintained the scenario definition settings as per the installation guide, my service pack level is Fiori SP03, so all the relevant, mandatory notes are applied.
Could you suggest anything else that I have missed out. attached the screenshot in scenario defn.
Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition.
Tags edited by: Michael Appleby

Hi Jegadesh,
The scenario ID should be LEAVEREQUESTAPPROVAL. Please double check the installation guide.
FYI.
I think you use old UI.
Important Note: Please use new SAP Fiori Launchpad
Regards,
Masa
SAP Customer Experience Group - CEG

Similar Messages

  • Getting an Error while trying to Approve Requisition in SAP Fiori PR Approval App

    Hi Experts,
                   We have followed all the instructions given in the installation/configuration of SAP Fiori PR APPROVAL APP. While approving the PR from Lunchpad we are getting the following error.
    ERROR :"RFC Error : Internal program error; (SAPMSSY1 ZCL_IM_ME_PROCESS_REQ_CTSD====CP 1 CBRC_EXIT_47_PURREQ)"
    2) I have put a debugger in the USER_EXIT : "CBRC_EXIT_47_PURREQ" and checked that the value of SY_UCOM is initial and when i store the value "MESAVE" and run through debugging i am able to approve the PR. I want to get rid of this Debugging mode and run the PR APP from Launchpad properly without error.
    Attached are the three screenshots for more referenece.
    Kindly help me with the same.
    Thanks & Regards:
    AZhar

    Am i getting this Error for the below reason?..
    Because i am also getting the Same Error as the error in the below post.
    POST "Fiori - Approve Purchase Requisition Error"
    Please find the attached error screenshot and confirm.
    Thanks & Regards:
    Azhar

  • FIORI Leave Approval Scenario Definition Error

    Hi,
    I have implemented a leave approval before. That was working fine. Now I'm implementing another leave approval on a different server (embedded deployment also). I followed the same configurations for scenario definition and system alias. But I'm still having this error.
    Below are my configurations:
    Hope someone can help. Thanks in advance.

    Hi Melanie,
    Are you implementing old UI? Please use new one..
    Important Note: Please use new UI with new SAP Fiori launchpad
    Only Approve Requests app uses scenario definition customizing. Other approval apps read workitems from backend application tables.
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Fiori - PO Approval App error

    Dear All Friends,
    I am trying to implement the standard PO Approval app and getting below error , Need your advice to sort this matter out.
    Error :
    No service found for namespace /IWPGW/, name ZGBAPP_POAPPROVAL, version 0001
    No service found for namespace , name gbapp_prapproval, version 0001
    Backend error occured. T100 Info:SRA001_CMN_MSG-013
    below is the configuratiion..
    Transaction /IWFND/MAINT_SERVICE
    Other Config
    Task ID : TS20000166 / System Alias : AEDCLNT120
    Launchpad Config
    Service URL : /sap/opu/odata/IWPGW/ZGBAPP_POAPPROVAL;mo/ScenarioCollection?$filter=key%20eq%20'ZGBAPP_POAPPROVAL‘
    scenarioId=ZGBAPP_POAPPROVAL
    Plz Advice on this.....
    Tags edited by: Michael Appleby

    Hi,
    No service found for namespace /IWPGW/, name ZGBAPP_POAPPROVAL, version 0001
                  -->Check you SAP aliases , confuration of gateway  
           refer below link https://help.sap.com/saphelp_gateway20sp06/helpdata/en/b0/4478b49a654ae9bb7d8ea68a0b610d/content.htm
    No service found for namespace , name gbapp_prapproval, version 0001
                 -->May be point 1 would solve this problem too
    Backend error occured. T100 Info:SRA001_CMN_MSG-013
                -->If you are using any backend system make sure your RFC works fine.
    Regards,
    Siva

  • Fiori - Generic Approval App

    Hi everybody,
    today my boss asked me if there is a generic approval app in Fiori.
    I replied that there are several apps available to approve different requests:
    Approve Leave Requests
    Approve Travel Requests
    Approve Travel Expenses
    Approve Timesheets
    So my boss argued that he wants a single app for all approval tasks. In the SAP Portal we have the UWL (Universal Work List) that meets this requirement (using NWBC an Inbox POWL can be used for the same purpose).
    Is there a Fiori app that can be used for all kind of approval tasks? Will such an app be available in future?
    TIA,
    Thomas
    Tags edited by: Michael Appleby

    Hi Thomas, not going to be a definite answer to your question but my understanding is that Fiori provides a solution for some 'common processes' which have been identified by SAP working closely with some of their clients. As such, I don't think it is there to provide a generic solution for approval - we are talking more about a custom UI5 application which replicates approval functionality available in UWL and which can be embedded into NWBC.
    Having said that, I recall seeing a Fiori presentation where it mentioned that Fiori can be enhanced to deal with any custom workflow - maybe a workflow needs to be defined with all the approval steps required and this mapped to fiori?
    See below:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0ab2463-4e16-3110-b08e-d93918e513a1?QuickLink=index&overridelayout=true&58789512365087
    Hope this is a good starting point.

  • Fiori leave request error "Could not start the app due to an internal error"

    Hi,
    I'm getting this error "Could not start the app due to an internal error" when accessing leave request application.
    I don't get this error when I login and launch the app for the first time. when I go back to the home screen and select "My Leave Requests" app again, I get this error.
    If I close the error message and do a browser refresh, everything is fine again for the first time, if I access the LR app again- same error .
    Other apps are working fine.
    I don't see any error in gateway or App logs.
    below is the Request URI
    /sap/opu/odata/UI2/INTEROP/ResolveLink?linkId=%27LeaveRequest-createLeaveRequest%27&shellType=%27FLP%27&formFactor=%27desktop%27
    Service call info
    Anyone with similar issue? any SAP notes?
    we are on
    UI2_731        100    0009    SAPK-10009INUI2731        SAP UI2 IMPL. FOR NW 7.31
    UI2_FND        100    0009    SAPK-10009INUI2FND        SAP UI2 FOUNDATION
    UI2_SRVC    100    0009    SAPK-10009INUI2SRVC        SAP UI INTEGRATION SERVICES
    UI5_731        100    0009    SAPK-10009INUI5731        SAP UI5 TEAM PROVIDER ON 731
    UISAPUI5    100    0009    SAPK-10009INUISAPUI5    SAP UI5
    UI_INFRA    100    0009    SAPK-10009INUIINFRA        SAP UI INTEGRATION INFRASTRUCTURE
    UIX01HCM    100    0003    SAPK-10003INUIX01HCM    UI for HCM Application
    Tags edited by: Michael Appleby

    Hi Masa,
    We have required SAP notes now, we are on version 1.22.5.
    It is still the same, working the first time I access the App, but subsequent access wont work until i refresh browser.
    I've include the response and lpd/tile screens.
    Thanks,
    Phani

  • Error in Leave Approval Workflow

    Hello Experts,
    I'm Using Standard Workflow WS0040077 for Leave Approval . I Activated the Event Linkage in SWEL .Did General Task in Agent Assignment . But when i run transaction PA30 . i get this error in SAP Inbox.
    Following error occurred:
    00 341
    RFC_NO_AUTHORITY
    Message text:
    Runtime error RFC_NO_AUTHORITY has occurred
    SAP System: EDV
    Client: 100
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM).
    so what should i do to solve this problem.

    Hi,
      Have you checked the workflow config in SWU3? It sounds like there may be a problem with the LOCAL RFC destination used by workflow. Click the 'Start Verification Workflow' button in SWU3 as a health check.
    Also, are you testing this in the right client?
    cheers
    Paul Bakker

  • Leave Approval Error via UWL

    Goodday,
    I am getting an error clicking on the task in UWL for leave request approval. The leave request is available in the manager's UWL. However, when teh manager clicks the workitem, we get the following dump:-
    ================================================================
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
        at com.sap.tc.webdynpro.serverimpl.wdc.sl.JCOClientConnection.resolveConnectionParameter(JCOClientConnection.java:476)
        at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.init(AbstractJCOClientConnection.java:241)
        at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.<init>(AbstractJCOClientConnection.java:226)
        at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnectionUnMapped(SystemLandscapeFactory.java:168)
        at com.sap.tc.webdynpro.services.sal.sl.core.SystemLandscapeInternal.getJCOClientConnectionUnMapped(SystemLandscapeInternal.java:36)
    =====================================================================
    However, when we tried the 'leave request: approval' iview, we are able to see teh request and approve it. The error is only approving via UWL. Any idea on this?

    Hi ,
    please find the following solution .it will definitely work .
    If you leave configuration is done.
    There was an incorrect data in your system. To do these please follow following process.
    delete this request using
    PTARQ> Delete documents (RPTARQDBDEl)
    Please read the report documentation before
    deleting the request but it should be safe as it is
    a development system.
    Please delete this with the above information or delete all
    the records for the approver.
    After this,, there will be some incorrect workitem in approver inbox.
    You need to clear that also by Tcode - SWWL.

  • HR Leave Approval issues

    hi everyone,
    I have modified the standard HR Leave approval Workflow WS002000077. In that workflow user decision, Unlock step type, loop steps are available. I am getting user decision workitem in inbox. When i click approve option, i has to go to unlock step type. But it is not going for unlock step.
    The same scenario is working good without loop, i can able to unlock it.
    So, in this scenario with loop, I am getting following errors;
    1. variables of the work item cannot be generated.
    2. Error in the evaluation of expression '&EMPLOYEET<???>.NAME&' for item '10'
    3. Error when determining attribute 'NAME' of object instance '[BO.EMPLOYEET.]'
    4. Agent determination for step '0000000038' failed
    5. Source (expression '&EMPLOYEET.ADMINISTRATOR.ADMINISTRATOR&') of binding assignment is not available
    6. Source (expression '&EMPLOYEET.ADMINISTRATOR.ADMINISTRATORGROUP&') of binding assignment is not avaible
    7. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for ite
    8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
    here item '10' refers to loop step. I am using custom rule. It is working fine without loop condition.
    Thanks in advance!!

    hi,
      That one previous workflow and it solved. But now the same one with loop for Re-submission of Leave Request after change.
      Actually the values from Employeet is not flowing in the Unlock step for agent determination. Because of that the agent determination is not possible for me. But it works well without loop scenario. Employeet is not instantiated.
    Here i am using loop condition for re-submission of leave request.
    Thanks,
    Balaji.V
    Edited by: Balajisap on Sep 19, 2011 3:56 PM
    Edited by: Balajisap on Sep 19, 2011 6:22 PM

  • Fiori : Mass Approval

    Hi,
    Is Mass Approval possible for Approval apps in Fiori ?
    I see we have Mass Action field in Scenario definition . If i check it, how can we enable Mass approval in Fiori ?
    Any other solution, please highlight

    Hi Tejas,
    Mass approval is not released in UI side.
    Users can use quick approval by side sliding in tablet.
    From business process point of view, mass approval is not a best practice.
    When user do mass approval, approves never check details and it means blind approval.
    If it is the case, workflow engine can set approval based on business rules and send workitems which really need to be checked. It reduce workload for managers.
    Regards,
    Masa
    SAP Rapid Innovation Group - RIG

  • I can no longer leave an app review in the iTunes store

    I can no longer leave an app review in the iTunes store.
    After I sign in, and want to leave a review I get the following message: "You must own this item to write a Customer Review. In order to write a Customer Review for this item you must have purchased or downloaded it."
    I used to be able to write and edit my reviews which I have done! But now I can't anymore even though I have bought and/or downloaded several apps. iTunes won't let me write a review anyway.
    Any help is appreciated.

    I have the same problem (for Mac and iPhone apps) and contacted Apple about this.
    The English speaking support said it is a known error and that they are working on a solution. The German support however (which I contacted first, unfortunately) gave me a refund of the apps I wrote them as an example. They told me I should buy them again – which is not possible, since the MacAppStore then gives the message "You have already purchased this app..." Ironically, for one of the two apps I was finally able to write a review, even at this point it wasn't listed in the purchased apps list anymore.
    I've never asked for a refund, and it's causing me more trouble than I had before: now I cannot update these refunded apps anymore (since they are not listed in the "Purchased" list). So I have to check manually if there is a new update (comparing version numbers) and then delete the app and "purchase" it again. Of course I would simply buy the apps from the developer directly, however, they are MacAppStore only.
    When I asked the AppStore support about a solution for this problem, they said it's technically not possible to write reviews for refunded apps (? yes, of course they were not really reading what I wrote them. I guess support at Apple is done by Siri now) and gave 10 free iTunes songs.
    I think reviews are very important for both customers and developers and it's not just a minor inconvenience, but a serious problem; what is especially disturbing, is that it's not the same for all apps: for Pixelmator, I had no problems to post a review, for Jumsoft's "Relationship" it doesn't work, for some apps it worked immediately, for some after a few weeks, for some never.

  • Fiori Timesheet Approval

    Hi Friends,
    In timesheet approval app, is there a possibility where manager can reject timesheet in one go for the entire week, rather than clicking on each line item for rejection.
    In one of the project, where business enters time to multiple items according to projects which they are working and the current process followed here is to reject the complete timesheet of entire week, rather than respective day or line item.
    Right now, we need to click on individual line for rejection and which client doesn't want and they wanted one time rejection for entire week.
    Is it possible to customize the approval screen.
    Please advice.
    Srikanth
    Tags edited by: Michael Appleby

    Hi Srikanth,
    As per the current design the default is approve and for Rejection you need to click on the entry which you have to reject and select a rejection reason. This was done for faster approvals since rejections is not the most common scenario.
    we are in process of coming up with a  new design for partially selecting some entries for Rejecetion.
    For the time being the only work around would be to create a new view to replace the current view using the extensibility concept.
    Best Regards
    Pankaj

  • App world network error code 40820

    Hi i have issues with App world v3 with an error code 40820 which says they cant connect to the network server. I have tried all the resolutions possible in the support from blackberry but it still dosen't work.
    I can view apps to download but i cant access my world or complete downloads. Please help! facebook app had an error message of 100 whereby they couldnt contact server.
    I have deleted the facebook app v2 and now the App world v3 still doesn't work. Im using a bold 9900 os7.
    Help required urgently!

    several at http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB28188 - but none work for me (running OS 7.1 now!). 
    What does work for me is - turn off cellular and on WiFi - connect to an access point and no error. Don't forget to switch off wifi and on cellular when done!
    BTW. App world access problems happened for me (over cellular) with OS 7.0 OEM build on my Torch 9850. Then they (BB/VZW) pushed out a new build and the problem disapeared!!!  Not to leave well enough alone, BB/VZW just made the OS 7.1 available, so I installed it - voila! the problem has reappeared. My corporate help desk said there is nothing in our BES set up that could be blocking it that he can find, so I blame BB/VZW (and there seems no way to contact them re: the KB article to say "where is the fix for OS 7.1?"). 

  • Download PO approval app Issue

    Hi All,
    While downloading the PO approval app from /UI5/UI5_REPOSITORY_LOAD i am not able to download index,main and maindetails view and the resource folder is also empty.
    is there any another way to download or help out to replace this file.
    Thanks,
    Rakesh R
    Message was edited by: Michael Appleby

    Hi Rakesh,
    There is no index.html. Component.js is used.
    Please take a look SAP Fiori Launchpad for Developers - Architecture Overview.
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Custom Leave approval task problem

    Dear All,
       I have a problem with my custom leave approval webdynpro task.
      Actually I was using standard task , TS12300097 for leave approval. It was working fine from SAP worklist from portal. If someone tries to approve from SAP R/3 it was providing an information like, this cannot be executed from SAP R/3.
      I had a requirement to add certain custom fields information to the task description, so I copied and created a new task similar to that and added the containers and filled the description to that. Then i cofigured the new task in SWFVISU also. It working fine from enterprise portal sap worklist.
      But some tries to approve from SAP Inbox in R/3 the workflow results in error. Its not providing the same information which was coming earlier with standard task.
    The error is as follow :
    Work item 000000885207: Object CL_PT_REQ_WF_ATTRIBS method DUMMY cannot be executed
    Dereferencing of the NULL reference
    Dereferencing of the NULL reference
    Error handling for work item 000000885207
    Let me how we can solve this issue.
    regards,
    Sabari Prabhu.

    We are changing our Leave Request workflow, and I also came across this problem while testing.
    In our situation, the problem is that we changed the approval task.  We used to have it as a call to report RPTARQAPP, but then changed back to the standard method of calling CL_PT_REQ_WF_ATTRIBS DUMMY.
    For us, it is only the old work items that go into error if the user tries to execute them in R/3.  If the workflow is then re-started, the item is once again available and can be processed in the UWL.  New work items come back with the pop-up message "The request cannot be started from the Business Workplace", like in the standard workflow.
    I think we will just add some encouraging wording to the task so that people will (hopefully) not attempt to execute the work items in R/3, like this:
    Please log on to ESS to approve this Leave Request through the Universal Worklist (UWL).
    It is not possible to complete this work item from within R/3, DO NOT execute this work item here.
    Once you have processed the request in ESS, this work item will automatically be completed.
    Good luck

Maybe you are looking for