Fiori News Tile

Hi,
I cant configure news tile on the launcpad.
Actually I see it on the Launchapd, but there is no data.
I've already configured it in designer and no sense.
I would appreciate any suggestions.
Best regards,
Olga

Hi Olga ,
Is Tile setting and target mapping performed correctly ? (would appreciate a screenshot of English Language)
This document might help you to check the configurations.
Regards
Virinchy

Similar Messages

  • SAP Fiori- News Tile is not working

    Dear Experts,
    I've installed and configured Fiori Apps (Analytical, Fact Sheet and X1 Apps); it was a good Experience to work on SAP UX, Learnt Lots of thing in HANA, ES and the traditional 1:1:3 Screen's X1 Apps.
    Just only one issue and that is NEWS Tile App..... Configured it, ribbon is going on but post clicking, it is not working.
    Although before the upgrade of SAP_UI- it was working perfectly fine. Post Upgrade- its not working..... PFB
    Fiori Launchpad,
    After Clicking, Error is as below,
    2014-08-28 18:53:04 registerResourcePath ('WebContent', '/sap/bc/ui5_ui5/sap/ar_srvc_news/') - sap.ui.ModuleSystem core-min-0.js:85 
    2014-08-28 18:53:04 Error - The specified component controller"WebContent.Component" could not be found!  core-min-0.js:85
    2014-08-28 18:53:05 Could not start the app due to an internal error -
    Let me know if anyone have any clue why this is happening.....
    Thanking you,
    ~ Mahendra

    hello emmanuel,
    which browser do you use? we have implemented this note with internet explorer it works but not with chrome - the news get displayed in the tile, when navigating to the tile with chrome get an error "app cannot be started" 
    console writes this out:
    2014-12-02 06:40:38 TypeError - undefined is not a function
    core-min-0.js:91 2014-12-02 06:40:38 App konnte aufgrund eines internen Fehlers nicht gestartet werden -  core-min-0.js:91 ucore-min-0.js:91 errorcore-min-3.js:31 errorcore-min-3.js:23 sap.ui.controller.openAppcore-min-1.js:29 a.publishcore-min-3.js:23 sap.ui.controller.openSomethingcore-min-0.js:21 pcore-min-0.js:32 rcore-min-0.js:32 t.fireWithcore-min-0.js:32 b.(anonymous function)NavTargetResolutionAdapter.js:2 (anonymous function)abap.js:26 sap.ui2.srvc.callODataWrapper.js:2 qcore-min-2.js:50 (anonymous function)core-min-2.js:50 p9abap.js:2 E.dispatchabap.js:2 XMLHttpRequest.handleEventabap.js:2 h
    maybe do you have a hint for me, error-solving in this environment is not the easiest thing *g*
    we have ui SP10
    best regards
    oliver

  • Creating new tile in touchsmart

    I am not succeeding very well in creating a new tile for other programs with the Touchsmart program. I keep getting that flashing statement about incorrect Target. Can someone help?

    Hi Deepak
    Thanks for Your response.
    I followed the steps you mentioned. While doing that, it's asking for Read Only Db User ID & Password.  If i give new ID & Password it gives the following information.
    "A Read Only DB USER is assigned for all Company Database, Adding a read only DB user is irreversible. Do you want to continue"
    Can you please guide me how this can be taken forward.
    regards
    Karthik

  • Fiori Launchpad - tile templates not available

    Hi ,
    In one of our client environment , only UI addon ( sp07 ) is installed in gateway system and custom SAPUI5 apps are developed.
    I want to use New Fiori launchpad for catalog and tile creation . i am able to create catalog but when i try to add a tile the templates are unavailable.
    Does tile templates are available only when one of the fiori UI component is installed or it available as a part of  UI addon.
    Right now i have to use old launchpage for tiles.

    Hi Masa,
    I have already implemented this note earlier , but now this note is updated with more patches of UI library, can updating the UI library to latest version will solve the problem ??
    Regards
    Yashpal Gupta

  • Why do the new Tiles show password-protected content?

    I updated to the new 33.1 version of firefox with the enhancements to the tiles displayed on a blank tab. I do not know if this behavior started prior to this update, or with it; just that my attention was drawn to it during the 33.1 tour.
    Issue: Some of the tiles are displaying screenshots of pages that are password-protected. These are for sites that I am currently NOT LOGGED IN TO. Therefore, my expectation is that no protected data should be visible. This is not what is happening. An FTP site clearly shows filenames and data; my dropbox account shows the various folders, etc. Again, these are accounts I am signed out of, so there is no way firefox should have cached images of them.
    In my opinion this is a serious security bug that needs addressed. In the meantime, any way I can disable this behavior?

    Firefox captures thumbnails while you are viewing a site and caches those for later display on the new tab page. It is not doing a real-time login to your FTP site.
    You can block sites from the new tab page if you do not want them there. When mousing over the tile, look for the "X" in the upper right corner.
    To stop Firefox from capturing a thumbnail image of a site, currently, there is a preference you can add to completely stop Firefox from capturing thumbnails at all, but the bug filed to try to work out how to block sensitive sites selectively is still under discussion.
    To use that global preference:
    (1) Select and copy the following preference name: '''browser.pagethumbnails.capturing_disabled'''
    (2) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (3) In the search box above the list, type or paste '''thumb''' and pause while the list is filtered. (This isn't strictly necessary, but makes it easier to see your change after you make it.)
    (4) Right-click in the list area and choose New > Boolean. In the dialog asking for the preference name, paste the one you copied earlier and click OK. Given the choice between false and true, choose true to disable capturing of thumbnails and then click OK.
    This is not retroactive, so Firefox still will have copies of your previously captured thumbnails. I'm sure there is a way to clear those, but I'd have to research it.
    Regarding the bug report I mentioned: [https://bugzilla.mozilla.org/show_bug.cgi?id=755996 755996 – [New Tab Page] shows sensitive information in the thumbnails]. See also: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette], [https://bugzilla.mozilla.org/page.cgi?id=voting.html Voting].

  • Fiori  launchpad - tile title

    Hi ,
    we have a custom app in the launchpad , and want to maintain the title of the tile in different languages.
    I dont see any place to maintain title in different language .
    Any Idea how to achieve this ?
    Regards
    Yashpal Gupta
    Tags edited by: Michael Appleby

    Hello Masayuki,
    I have not created a new launchpad.
    in /sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html  , i have created a new catalog and group .
    inside catalog  , few tiles are created.
    when i open  /sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html in different language the tile title is disabled for input.
    also if scope= CONF is added , i cannot see the catalog created by me.
    Regards
    Yashpal

  • Fiori Launchpage -tiles issues

    Hello,
    If I set up n roles in user gateway, on the launchpage, I got n times the same aplication (one only app), like I present in the image.
    We have SAPUI5 version 1.12.7. (we cannot increase the support packages at the momment).
    If I open the url sap/opu/odata/UI2/PAGE_BUILDER_PERS/Pages('%2FUI2%2FLAUNCH_PAGE')?$expand=allCatalogs/Chips I got two entries, for different applications, in this case:
    <entry>
    <id>
    http://server:port/sap/opu/odata/UI2/PAGE_BUILDER_PERS/Catalogs('SRA002_HCM_TS_MAN')
    </id>
    </entry>
    <entry>
    <id>
    http://server:port/sap/opu/odata/UI2/PAGE_BUILDER_PERS/Catalogs('SRA004_FI_TRREQ_CR')
    </id>
    </entry>
    Did you got this issue in Launchpage? Do you know how can I fix that?
    Thank you
    Best regards
    João Macedo

    Hi João,
    Launchpage is old one. Please use new Launchpad.
    Important Note: Please use new UI with new SAP Fiori launchpad
    Regards, Masa
    SAP Customer Experience Group - CEG

  • SAP Fiori - Launchpad: Tile Error

    Dear Fellow Members,
    Currently, while using a custom made theme via UI Theme Designer for Launchpad, we fail to load the same custom made theme to individual tiles. Once any tile is launched, it opens up using the default theme.
    Can someone please support us in identifying the way to fix this issue and have the tiles (individual apps) replicate the same theme that is being consumed by the Launchpad? (Hint: where is the Launchpad pulling the Target URL for the tiles from?)
    Awaiting reply!
    Thank You
    Nikisha Singh
    SAP Mobility Consultant

    Hi Masa,
    1) The Action was put Manually - not sure what to fill in that field. Service URL was picked up from Catalogue Administration - Approve Leave Request. See below -
    2) See the Target Mapping Screenshot:
    3) UIX01HCM - has not been installed. We are at GW 2.0 NW 7.02
    Rgds,
    Nikisha

  • Problems to add title icon on fiori launchpad tiles page

    Hi Experts,
    I am able to add page title for login page but after login i am not getting that icon, The sap standard one is coming. Please check the screen .
    Again i am saying for login page the page title icon is coming properly. But its not coming for home page.
    Regards
    Binod Kumar

    Hi Binod Kumar,
    The Login page for Fiori is configured separately from the Launchpad.  Configuring Login Screen for Launchpad Designer - User Interface Add-On for SAP NetWeaver - SAP Library makes it pretty clear that the Login page is a customized standard ABAP Login.
    As I am not entirely sure what you mean by page title icon, I would direct you to look further down the page I linked here for you at the Extending the Launchpad and UI Theme Designer.  Probably Theme Designer is what you need.
    I would also direct you to the All Things SAP Fiori which is the Fiori Landing Page with links to most Fiori related content.  A search using a custom Google Search will probably get you other Discussions in the SAP for Mobile community where most Fiori content resides.
    Regards, Mike
    SAP P&I Technology RIG

  • All my tiles are gone when I open a new tab, how do I get them back?

    This is hopeless. Suddenly, all my frequently used tiles are gone from the "new tab"-page.
    And they do not restore, even if I visit the same pages.
    The new tab-page are just full of empty squares.
    How do I get them back?
    I tried to follow the instructions on how to get new tiles in, but the buttons that I'm supposedly to use are not present.
    Thanks so much for replying. This is driving me crazy!

    Yes, I can drag a history item or bookmark to a tile, and several will appear in tiles. BUT, they disappear again as soon as I open a new tab.
    Settings are set to "Remember history".

  • Fiori Launchpad - Are Catalogs Missing

    Hi,
      We are doing an install of FIORI, having upgraded our system to EHP 7 - and
    SAP_UI 740 0007 SAPK-74007INSAPUI User Interface Technology 7.40.
    We use a single server for the moment for the gateway and erp system.
    I can access the Fiori apps using the old launchpage screen - no problem, having assigned the relevant Catalog Pages to the relevant roles.
    I can access the new Fiori Launchpad and Launchpad Designer also no problem.
    However, and maybe my understanding is incorrect here - i was thinking i should see a number of standard catalogs for the standard fiori apps that i could manipulate and assign to groups etc as required.  Or this this incorrect?  I see nothing new in LPD_CUST - i would have thought there should be new entries here for the various apps to link to ?
    Or is it a case these all need to be created from scratch?  I have gone through the help documentation a number of times and cannot make out how to generate these even if i need to - exactly what the links between LPD_CUST and a new app within the catalog are.  I do have access within the designer to the tile templates but the help is not clear on how to link these to the standard fiori apps.
    Am i missing something in the set up?  is there further documentation available on the links required.
    Thanks
    Sinead
    Tags edited by: Michael Appleby

    Hi Michael,
      I don't know - In the help it references the following say, for Approve Requisitions:
    Front-End Components
    UI5 Application                                MM_PR_APV
    Business Role          SAP_MM_BCR_Buyer_X1
    Business Catalog       SAP_MM_BC_Buyer_X1
    Business Catalog Group
    SAP_MM_BCG_Buyer_X1
    LPD_CUST Role                         UIX01MM
    LPD_CUST Instance     TRANSACTIONAL
    But I see no reference to the above elements in my system.  I am just wondering are they missing, should they be there?  How do i get them there if they are missing and if not, how do i go about creating the require link for new tiles.
    Cheers
    Sinead

  • Mixed content error for FIORI launchpad designer

    Dear team,
    I have activated a ERP trial on AWS via CAL. Fiori launchpad and designer opens and works properly but when I am creating new tiles in a catalog, none of information on tile gets saved.
    I checked in Chrome console and following error is recorded when saving a tile:
    After allowing unsafe scripts, error changed to following:
    Any ideas?
    Best Regards - Anuraag

    Hi Anuraag,
    Please open the launchpad designer with http (not https). If you can not logon via http, change the protocol to  "Do not switch" in the SICF setting.
    Simple steps to configure Fiori Login\Logoff Page
    SAP Fiori - SAP Fiori launchpad troubleshooting
    Regards,
    Masa / SAP P&I Technology RIG

  • Navigation issue using jsf, tiles, tomahawk  :loosing faces context

    Hi all,
    I enhanced my webapp using tomahawks jscookmenu.
    Triggering 1 menuItem the wanted pages displays correctly but the next click anywhere in the application shows this error:
    org.apache.jasper.JasperException: javax.faces.FacesException: Faces context not found. getResponseWriter will fail. Check if the FacesServlet has been initialized at all in your web.xml configuration fileand if you are accessing your jsf-pages through the correct mapping. E.g.: if your FacesServlet is mapped to  *.jsf (with the <servlet-mapping>-element), you need to access your pages as 'sample.jsf'. If you tried to access 'sample.jsp', you'd get this error-message.The web config is like that:
    <?xml version="1.0"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
         version="2.4">
         <context-param>
              <description>Tiles MyFaces Config</description>
              <param-name>tiles-definitions</param-name>
              <param-value>/WEB-INF/tiles.xml</param-value>
         </context-param>
         <context-param> 
              <param-name>javax.faces.DEFAULT_SUFFIX</param-name> 
              <param-value>.jsp</param-value>
         </context-param>
         <context-param>
              <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
              <param-value>server</param-value>
         </context-param>
         <context-param>
              <param-name>javax.faces.PARTIAL_STATE_SAVING_METHOD</param-name>
              <param-value>off</param-value>
         </context-param>
         <!-- context-params mafaces -->
         <context-param>
              <param-name>org.apache.myfaces.READONLY_AS_DISABLED_FOR_SELECTS</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.RENDER_VIEWSTATE_ID</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.STRICT_XHTML_LINKS</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.CONFIG_REFRESH_PERIOD</param-name>
              <param-value>this is a bug in myfaces</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.ADD_RESOURCE_CLASS</param-name>
              <param-value>org.apache.myfaces.renderkit.html.util.DefaultAddResource</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.RESOURCE_VIRTUAL_PATH</param-name>
              <param-value>/faces/myFacesExtensionResource</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.CHECK_EXTENSIONS_FILTER</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.ALLOW_JAVASCRIPT</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.PRETTY_HTML</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.AUTO_SCROLL</param-name>
              <param-value>true</param-value>
         </context-param>
         <context-param>
              <param-name>org.apache.myfaces.DETECT_JAVASCRIPT</param-name>
              <param-value>false</param-value>
         </context-param>
         <!-- StartupServletContextListener -->
         <listener>
              <listener-class>
                   org.apache.myfaces.webapp.StartupServletContextListener
              </listener-class>
         </listener>
         <!-- Faces MyFacesExtensionsFilter -->
         <filter>
              <filter-name>MyFacesExtensionsFilter</filter-name>
              <filter-class>
                   org.apache.myfaces.webapp.filter.ExtensionsFilter
              </filter-class>
              <init-param>
                   <param-name>uploadMaxFileSize</param-name>
                   <param-value>1m</param-value>
              </init-param>
         </filter>
         <filter-mapping>
              <filter-name>MyFacesExtensionsFilter</filter-name>
              <url-pattern>/faces/*</url-pattern>
         </filter-mapping>
         <filter-mapping>
              <filter-name>MyFacesExtensionsFilter</filter-name>
              <url-pattern>*.jsf</url-pattern>
         </filter-mapping>
         <!-- Faces Servlet -->
         <servlet>
              <servlet-name>Faces Servlet</servlet-name>
              <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
              <load-on-startup>1</load-on-startup>
         </servlet>
         <!-- Faces Servlet Mapping -->
         <servlet-mapping>
              <servlet-name>Faces Servlet</servlet-name>
              <url-pattern>*.jsf</url-pattern>
         </servlet-mapping>
         <welcome-file-list>
              <welcome-file>index.jsp</welcome-file>
         </welcome-file-list>
         <servlet>
              <servlet-name>imageServlet</servlet-name>
              <servlet-class>my.com.xplorer.gui.v.ImageServlet</servlet-class>
         </servlet>
         <servlet-mapping>
              <servlet-name>imageServlet</servlet-name>
              <url-pattern>/image/*</url-pattern>
         </servlet-mapping>
    </web-app>So I lost the faces context using the jscookmenu, I believe.
    My webapp uses tiles, and there is 2 navigation possibilities: tomahawaks jscookmenu and tomahawaks commandNavigation.
    Latter one runs ok, I do use
    <t:panelNavigation id="nav" styleClass="navigation"
         itemClass="navitem" separatorClass="navseparator" 
         activeItemClass="navitem_active" openItemClass="navitem_open">
         <t:commandNavigation action="#{newsHandler.userRequest}" value="#{newsHandler.rss_source_name[0]}">
              <f:param name="navigator"  value="/jsf/news.jsp" />
         </t:commandNavigation>
    </t:panelNavigation>for this kind of navigation I do not use any navigation rules in faces config. To dynamically include the desired faces page I do that:
    <%
         String s = (String)request.getParameter("navigator");
         if (s == null || s.length() == 0 ) {
              s =  "/jsf/explorer.jsp";
    %>
    <jsp:include page="<%=s %>" />That does work.
    Now like I said I did enhance the app by adding tomahawks jscookmenu.
    Therefore I use the following in another tile:
    <t:jscookMenu layout="hbr" theme="ThemeOffice" styleLocation="resources/css">
              <%/* Availaible jscookMenu themes: ThemeIE, ThemeMiniBlack, ThemeOffice, ThemePanel
                 Availaible jscookMenu layout: hbr, hbl, hur, hul, vbr, vbl, vur, vul
                 respect to Heng Yuan http://www.cs.ucla.edu/~heng/JSCookMenu
            */%>
      <t:navigationMenuItem id="nav_0" itemLabel="#{localz.Xplorer}" action="Xplorer" />
    </t:jscookMenu>For this kind of navigation I tried to use navigation rules and the following show the config:
         <navigation-rule>
           <from-view-id>/jsf/*</from-view-id>
            <navigation-case>
                <from-outcome>Xplorer</from-outcome>
                <to-view-id>/jsf/tileMain.jsp?navigator=/jsf/explorer.jsp</to-view-id>
            </navigation-case>
            <navigation-case>
                <from-outcome>Tabs</from-outcome>
                <to-view-id>/jsf/tileMain.jsp?navigator=/jsf/tab.jsp</to-view-id>
            </navigation-case>
         </navigation-rule>That works for the first click. The desired page is shown. The nect click anywhere in the app then show the mentioned error.
    Using tiles I use this view-handler
    <view-handler>org.apache.myfaces.tomahawk.application.jsp.JspTilesViewHandlerImpl</view-handler>One question is: can I use another view-handler on top of the above one? So I could extend com.sun.facelets.FaceletViewHandler and try my luck with this? Or is the solution pointed out just a millisecond from being ok, I just don�t see it?
    Maybe you need to know a bit more on how I use tiles:
    That is the page I start with. It inserts the tile shown underneath.
    <f:view locale="#{userLocale}">
         <f:loadBundle var="localz" basename="my.com.xplorer.gui.v.Lokalization" />
         <f:loadBundle var="bundle" basename="my.com.xplorer.gui.v.messages" />
         <f:subview id="tileMain">
              <h:form id="myJsfForm" styleClass="standard">
                        <tiles:insert definition="template" flush="false" />
              </h:form>
         </f:subview>
         <h:messages />
    </f:view>
    </html>The foolowing is the tile structure.
    The bodi tile is the dynamic part. Above you see that I dynamically load the pages into it.
    <t:htmlTag value="div" styleClass="pageLayout">
         <h:panelGrid columns="2" align="center" styleClass="pageContent">
              <f:facet name="header">
                   <f:subview id="header">
                        <tiles:insert attribute="header" flush="false" />
                   </f:subview>
              </f:facet>
              <t:htmlTag value="div" styleClass="pageMenu">
                   <f:subview id="menu">
                        <tiles:insert attribute="menu" flush="false" />
                   </f:subview>
              </t:htmlTag>
              <t:htmlTag value="div" styleClass="pageContentWoMenu">
                   <f:subview id="bodi">
                        <tiles:insert attribute="bodi" flush="false" />
                   </f:subview>
              </t:htmlTag>
              <f:facet name="footer">
                   <f:subview id="footer">
                        <tiles:insert attribute="footer" flush="false" />
                   </f:subview>
              </f:facet>
         </h:panelGrid>
    </t:htmlTag>Maybe you also need to know the tiles config?
    <tiles-definitions>
       <definition name="template" path="/jsf/tileTemplate.jsp">
              <put name="header"  value="/jsf/header.jsp"/>
          <put name="menu"    value="/jsf/menu.jsp"/>
          <put name="bodi"    value="/jsf/bodi.jsp"/>
          <put name="footer"    value="/jsf/footer.jsp"/>
       </definition>
       <definition name="/jsf/news.tiles" extends="template">
              <put name="bodi"  value="/jsf/news.jsp"/>
       </definition>
       <definition name="/jsf/explorer.tiles" extends="template">
              <put name="bodi"  value="/jsf/explorer.jsp"/>
       </definition>
       <definition name="/jsf/tab.tiles" extends="template">
              <put name="bodi"  value="/jsf/tab.jsp"/>
       </definition>If you have read until here: thanks very much.
    There seems to be a sort of gap regarding jsf navigation documentation.
    I mean the ordinary way is covered everywhere (the book I have covers that too), but jscookmenu seems not to fit in too good. I also tried it with an actionslistener in the jscookmenu but that failed, too. So a link to documents telling the truth on jsf navigation I would appreciate very much.
    Kind regards
    Belle Ile En Mer

    This is the error i am getting into now..
    exception
    org.apache.jasper.JasperException: An exception occurred processing JSP page /welcomeJSF.jsp at line 19
    16: This file is an entry point for JavaServer Faces application.
    17: --%>
    18: <body>
    19: <f:view>
    20: <h3><h:outputText value="CHOULTRY'S IN BANGALORE" /></h3>
    21: <h:form>
    22: <table border="0">
    Stacktrace:
         org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:505)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:416)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
    root cause
    java.lang.RuntimeException: Cannot find FacesContext
         javax.faces.webapp.UIComponentClassicTagBase.getFacesContext(UIComponentClassicTagBase.java:1811)
         javax.faces.webapp.UIComponentClassicTagBase.setJspId(UIComponentClassicTagBase.java:1628)
         org.apache.jsp.welcomeJSF_jsp._jspx_meth_f_005fview_005f0(welcomeJSF_jsp.java:112)
         org.apache.jsp.welcomeJSF_jsp._jspService(welcomeJSF_jsp.java:86)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  • How To Clear Mapviewer Tile Cache

    I am running a standalone version of Mapviewer using Weblogic Server.
    Weblogic and Mapviewer are running on a linux server with CentOS 5.8 64bit.
    - MapViewer Version: Ver11_1_1_7_1_B130516
    - Weblogic Server 10.3.6
    I am using Mapbuilder installed on a Win7 64bit client.
    - Mapbuilder Build: Ver11_1_1_7_1_B130516
    My datasource is an Oracle 11.2.0.3 database running on a linux server with CentOS 5.8 64bit.
    I am using the new HTML5 JavaScript mapping API to render my map.  I am using any one of the following browsers:
    IE10 (v10.0.9200.16635)
    Firefox (v23.0)
    Chrome (v28.0.1500.95 m
    I have created the following Mapbuilder objects:
    Geometry Theme: SRA_SUITE304_F1_ROOM
    - for the label styling rules, I have set the Label Function = 1, so that labels will be displayed for the objects
    Base Map: SRA_ALL
    <?xml version="1.0" standalone="yes"?>
    <map_definition>
          <theme name="SRA_SUITE304_F1_ROOM"/>
      </map_definition>
    Tile Layer: SRA_ALL
    <map_tile_layer name="SRA_ALL" image_format="PNG" http_header_expires="168.0" concurrent_fetching_threads="3">
         <internal_map_source data_source="ICLOGIT1" base_map="SRA_ALL" bgcolor="#ccccff"/>
         <coordinate_system srid="4326" minX="-74.54" minY="39.407" maxX="-74.53" maxY="39.41"/>
         <tile_image width="256" height="256"/>
         <zoom_levels levels="10" min_scale="100.0" max_scale="1600.0" min_tile_width="6.097560975612876E-5" min_tile_height="9.090909090913742E-4">
              <zoom_level level="0" name="level0" description="" scale="1600.0" tile_width="9.090909090913742E-4" tile_height="9.090909090913742E-4"/>
              <zoom_level level="1" name="level1" description="" scale="1175.0" tile_width="7.142857142860797E-4" tile_height="7.142857142860797E-4"/>
              <zoom_level level="2" name="level2" description="" scale="864.0" tile_width="5.263157894739535E-4" tile_height="5.263157894739535E-4"/>
              <zoom_level level="3" name="level3" description="" scale="634.0" tile_width="3.846153846155814E-4" tile_height="3.846153846155814E-4"/>
              <zoom_level level="4" name="level4" description="" scale="466.0" tile_width="2.7777777777791986E-4" tile_height="2.7777777777791986E-4"/>
              <zoom_level level="5" name="level5" description="" scale="342.0" tile_width="2.0833333333343992E-4" tile_height="2.0833333333343992E-4"/>
              <zoom_level level="6" name="level6" description="" scale="251.0" tile_width="1.5151515151522904E-4" tile_height="1.5151515151522904E-4"/>
              <zoom_level level="7" name="level7" description="" scale="185.0" tile_width="1.1235955056185523E-4" tile_height="1.1235955056185523E-4"/>
              <zoom_level level="8" name="level8" description="" scale="136.0" tile_width="8.264462809921583E-5" tile_height="8.264462809921583E-5"/>
              <zoom_level level="9" name="level9" description="" scale="100.0" tile_width="6.097560975612876E-5" tile_height="6.097560975612876E-5"/>
       </zoom_levels>
    </map_tile_layer>
    I am using the following HTML to display the map using the Tile Layer SRA_ALL:
    <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <title>SRA2 - Map 01 - 10 Zoom Levels</title>
    <meta http-equiv='Content-Type' content='text/html; charset=UTF-8'>
    <script type='text/javascript' src='http://xxxx.xxxx.com:7002/mapviewer/jslib/v2/oraclemapsv2.js'></script>
    <style type= 'text/css '>body {cursor:default;}</style>
    <script language="JavaScript" type="text/javascript">
    var baseURL="http://xxxx.xxxx.com:7002/mapviewer";  // location of mapviewer
        function showMap()
            var map = new OM.Map(
            document.getElementById('map'),
                mapviewerURL:baseURL
            var tileLayer2 = new OM.layer.TileLayer(
            "SRA_ALL",
                dataSource:"xxxx",
                tileLayer:"SRA_ALL"
            map.addLayer(tileLayer2) ;
            map.addScaleBar() ;
            map.addNavigationPanelBar() ;
            map.setMapCenter(new OM.geometry.Point(-74.537446,39.409008,4326) );
            map.setMapZoomLevel(3) ;
            map.init() ;
    </script>
    </head>
    <body onload="javascript:showMap()">
        <DIV id=map style="width:99%;height:99%"></DIV>
    </body>
    </html>
    This produces a correctly rendered map in my browsers, which displays the labels I expect.
    Next, I changed the Labeling Function on my Geometry Theme: SRA_SUITE304_F1_ROOM, setting it to -1, so that object labels would not be displayed.
    In Mapbuilder, I can preview the geometry theme, and it shows that no labels are displayed.
    Still in Mapbuilder, I can preview the base map that the geometry theme is assigned to, and the basemap also shows that no labels are displayed for that theme.
    I saved all my changes in Mapbuilder.
    However, when I view my map (using the same HTML code) in the browser, the map still shows the labels.
    I have tried all of the following:
    1) purging the geometry cache for the affected map datasource using the MapViewer Administration Console
    2) purging the browser cache
    3) restarting the mapviewer server
    4) restarting the entire supporting weblogic server
    None of these actions cause the map viewed in my browser to be updated to show the map without labels.
    Note: If I create a new Tile Layer using the same base map, my changes are visible in the browser map.
    What am I missing here?
    What cache do I need to clear so that my map is displayed correctly in my browser after I make changes to the underlying Mapbuilder objects?
    Thanks in advance for your help.

    Thanks.  That was the last key to the puzzle.
    Here are the steps I now follow to ensure that changes made to underlying MapBuilder objects are visible in the browser.
    Perform the following steps:
    1) Modify the object (style, theme, base map, tile layer) in MapBuilder, and save all changes.
    2) Using MapViewer Administration Console, Purge Cached Metadata for each affected datasource.
    3) On the MapViewer server, clear the Map Cache directory.  The location of the Map Cache directory is specified in the mapViewerConfig.xml file under the section "Map Cache Server Setting".
    e.g.
    cd <map cache dir>
    rm -rf *
    4) Clear the browser cache and temp files for the browser you are using (e.g. IE, Firefox, Chrome).  If you think you are not clearing the cache completely, then use the appropriate "private browsing" feature of the browser to view the map.  You should then be able to see the changes made to the map in the browser.

  • How can I dissable 'sponsored' tiles?

    With the new Firefox we got the very unwanted sponsored tiles. There were about 10 tiles that were placed for me. Some of them were even animated. Some nice spam right in your face on a screen you use regularly.
    There is a' gears' icon where you can say the page should go back to classic mode. But this doesn't do anything for me. The 'way to many tiles screen' with the sponsored tiles stay on the page (even after restarts).
    There is a option disable, but this just makes the screen blank.
    The solution I'm looking for is to restore the ' new tab screen' as it was with 9 tiles (15 is way to much) without tiles being pushed by Mozilla.
    I have clicked the 'X' on the spam tiles and had to remove quiet some tiles before they stopped comming. But I fear (and I think I'm right here) that when new companies pay Mozilla to spam their users that the new tile will come on my screen. because it is added later and pushed to my screen.
    Mozilla, stop herrassing your user base before they walk away.

    Try this add-on:
    https://addons.mozilla.org/en-US/firefox/addon/new-tab-tools/
    Or fiddle with the about:config prefs.
    browser.newtabpage.columns
    browser.newtabpage.rows

Maybe you are looking for

  • Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 error

    Hi All, When I refresh a query/workbook getting following error message and can not proceed further.. Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01 We are using BW 3.5 and BEX reports. I'd appreciate if you could help me on this

  • ITunes wont sync contacts - new install

      Latest iTunes is open and next to it my full contact list. Only I cant get iTunes to send the data to my phone. Is there a trick to making work?

  • Notebook does not start after BIOS Update crash

    Hi all, I just want to ask whether is a chance to reactivate my Satellite A300 after a BISO update crash without send it to the Toshiba service. I downloaded the new BISO and started it from the Windows menu. After a few seconds my PC crashed and eve

  • Nokia hands free car kit & 6310i

    when i bought my ford st170,i had a hands free car kit fitted, after selling it i bought a new ford transit connect but not before removing it to fit it to the van.The hands free has a red wire,yellow wire and black wire plus two wires for the speake

  • All font and pictures are blurry out of no where. why?

    I use photoshop elements editor 12 everyday for work. last week all items are blurry and never did that before. I've tried enhancing the pictures and it doesn't help. how can I fix this or am I able to uninstall and reinstall on the same comp?