Fiori Wave 2 Launchpad HTTP 511 Network Authentication Required
Dear expert,
When I try to call the Fiori launchpad, it returns the code of HTTP 511 Network Authentication Required. BEFORE the login screen shows.
Also error: GET /sap/bc/ui5_ui5/ui2/ushell/shells/abap 401 Unthorized.
However if I maintain the ushell service in SICF on LOGON DATA tab with a specific user A103296.
The homepage(with error "unable to load groups") comes out directly without the login screen.
For "unable to load groups", it says 401 Unauthorized for PAGE_BUILDER_PERS.
However I have both the authorization SAP_UI2_ADMIN_700 and SAP_UI2_USER_700 for A103296.
I suppose there's no need to maintain the logon data for SICF service,right?
On the other hand, Launchpad Admin screen runs smoothly without any issue.
Could you please help on this? Masayuki Sekihara
Thank you very much indeed!
Thanks,
Chloe
Hi Masa,
The issue is solved.
Because the customer's /bc/ui5_ui5/ui2 service logon ABAP class was changed from /UI2/CL_SRA_LOGIN to /IWFND/CL_COC_SYSTEM_LOGIN.
Change the class back to /UI2/CL_SRA_LOGIN and is able to log on to the launchpad now.
But cannot figure why this error message shows about "authentication".
Thanks,
Chloe
Similar Messages
-
HT1992 Proxy Authentication Required . What is this?
Hello people,
In the last 2 months, a strange massage began to pop for some websites I'm trying to visit. Is there someone who knows what to do with it? I can't think about something that might have cause it... I can't visit these websites.
It says:
Proxy Authentication Required
Authentication for HTTP proxy . . . . . .
and then Username and Password are need to be filled.
Please Help..I'm going to assume that you are not managing and not running OS X Server here. While it's possible to set up a proxy server with OS X Server (with some added configuration work), your question seems to be specific to a client web browser configuration.
With an OS X client request from a web browser such as Safari or Firefox, the HTTP 407 Proxy Authentication Required messages usually indicate something that's been implemented by the local site administration or local network management. This can be a way to cache web content and also as a way to track and/or to restrict access to specific web sites.
If you're on a school or a corporate network or similar, please check with the IT organization for assistance here; with the folks that manage the network.
If you're on your own network here (and not using OS X Server or some other web proxy), then this might be something weird with some local nanny filter installed in your gateway, or with some ISP web proxy outside your local network — more details on your network would be useful here.
Here are some technical details of the HTTP 401 and 407 authentication mechanisms. -
SAP Fiori Wave 7 Launchpad is blank
Hi All,
I have recently activated all the standard Odata and Sicf Services required to implement SAP Fiori wave 7 apps.
I tried to access the Launchpad of Fiori, but I am getting a blank page.
When I traced I got the below error in screenshot:
Similar error I get in transaction /IWFND/ERROR_LOG.
Please let me know the possible solution for this.
Thanks in advance.
Regards,
Benita PereiraHi Ketul,
Thanks for your reply.
But I have assigned following roles to the user id:
SAP_HR_BCR_MANAGER_T
SAP_HR_BCR_EMPLOYEE_T
Let me know if any other role also needs to be assigned to the user.
Regards,
Benita -
When I joined my wireless network I set authentication required to on and di not eneter a username or password. I then went into safari and as requested entered my username and password. Now,however the iPod is remembering my credentials. How do I clear my credentials?
Go to Settings>Safari and Clear History, Cookies and Data
Also go to Settings>Safari>AutoFill and Make sure that Names and Passwords are OFF and Clear All. -
17:06:13 Synchronizer Version 14.0.6123
17:06:13 Synchronizing Mailbox '[email protected]'
17:06:13 Synchronizing Hierarchy
17:06:13 4 folder(s) added to online store
17:06:13 1 folder(s) updated in online store
17:06:13 Synchronizing local changes in folder 'Inbox'
17:06:13 Error synchronizing folder
17:06:13 [80041004-0-0-430]
17:06:13 Error with Send/Receive.
17:06:13 There was an error synchronizing your folder hierarchy. Error : 80041004.
17:06:13 Synchronizing server changes in folder 'Calendar'
17:06:13 Synchronizing server changes in folder 'Contacts'
17:06:13
17:06:13
*Request*
17:06:13 17:06:13:0590
17:06:13 POST
17:06:13 http://
17:06:13 contacts.msn.com
17:06:13 /ABService/ABService.asmx
17:06:13
17:06:13 <ABFindAll xmlns="http://www.msn.com/webservices/AddressBook"> <abId>00000000-0000-0000-0000-000000000000</abId><abView>Full</abView><deltasOnly>false</deltasOnly></ABFindAll>
17:06:13
*Response*
17:06:13 17:06:13:0870
17:06:13 HTTP/1.1 407 Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. )
Via: 1.1 TMG
Proxy-Authenticate: Negotiate
Proxy-Authenticate: Kerberos
Proxy-Authenticate: NTLM
Connection: close
Proxy-Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Type: text/html
Content-Length: 707
17:06:13
17:06:13
17:06:13
17:06:13 Error with Send/Receive.
17:06:13 There was an error synchronizing a contacts folder. Error : 80004005.
17:06:13 Synchronizing server changes in folder 'Drafts'
17:06:13 Synchronizing local changes in folder 'Inbox'
17:06:13 Error synchronizing folder
17:06:13 [80041004-0-0-430]
17:06:13 Synchronizing server changes in folder 'Sent Items'
17:06:13 Synchronizing server changes in folder 'Deleted Items'
17:06:13 Synchronizing server changes in folder 'Junk E-mail'
17:06:13 Done
17:06:13
17:06:13
*Request*
17:06:13 17:06:13:0870
17:06:13 POST
17:06:13 http://
17:06:13 mail.services.live.com
17:06:13 /DeltaSync_v2.0.0/Settings.aspx
17:06:13
17:06:13 <?xml version="1.0" encoding="utf-8"?><Settings xmlns="HMSETTINGS:"><ServiceSettings><SafetySchemaVersion>1</SafetySchemaVersion><SafetyLevelRules><GetVersion/></SafetyLevelRules><SafetyActions><GetVersion/></SafetyActions><Properties><Get/></Properties></ServiceSettings><AccountSettings><Get><Options/><Properties/></Get></AccountSettings></Settings>
17:06:13
*Response*
17:06:13 17:06:13:0870
17:06:13 HTTP/1.1 407 Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. )
Via: 1.1 TMG
Proxy-Authenticate: Negotiate
Proxy-Authenticate: Kerberos
Proxy-Authenticate: NTLM
Connection: close
Proxy-Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Type: text/html
Content-Length: 707
17:06:13
17:06:13Hi,
According to the log, it seems that TMG firewall denied the request and replied with an HTTP 407 response, indicating that proxy authentication was required. This was done because the Forefront TMG firewall did not have any access rules which would allow
the anonymous request. Please check if you have configured related access rules.
When did you recieve this log? Is there anyting wrong? Which authentication method you have used, Kerberos, NTLM or other?
It seems that each time a web proxy client requests a resource through a Forefront TMG firewall that requires NTLM authentication the client is actually denied twice during the transaction before being successfully authenticated and allowed access. When
the Forefront TMG firewall is configured to use Kerberos there is only a single denied request and HTTP 407 response and then contact a domain controller and obtain a Kerberos ticket to present to the TMG firewall to gain access to the resource.
If you configured the TMG clients with a certain proxy name, please make sure you typed the TMG's domain computer name only (not IP address nor alias).
Best regards,
Susie -
HTTP/1.1 407 Proxy Authentication Required for cloud connection
I am using Jdeveloper version 11.1.1.7.1 for ADF deployment on cloud service(Java and DB services).As instructed ,I have followed all the steps and in jdeveloper .when I tried to Authenticate the created connection with username and password, i am getting HTTP/1.1 407 Proxy Authentication Required .I am clueless how to solve this,Followed all the blogs but no luck.Please help on this,
Presumably you are behind a FW, does your proxy require authentication if so did you set it with "Tools > Preferences > Web Browser and Proxy > Proxy Server Requires Authentication". Also what is the version of your JCS SDK ? You can check it by:
java -jar javacloud.jar -version
It should be something like 15.1.2.0 or later ..
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
Requiring https in Apex-authenticated application
Apex 4.1.1 on OHS
From reading around the subject it seems that to remove http access from authenticated pages in Apex 4.1, the cookie for the authentication scheme should be set to Secure = 'Y'.
We have a custom authentication scheme in which no cookie details are specified, and I'm not sure what the implications would be of setting Secure = Y in those circumstances.
Can anyone point to a resource with more information about this, or explain whether the cookie name (and path/domain?) should be set if secure is set to "Yes"?
We do have https enabled on the server and are able to navigate the app with it, we just need to disable https.
Thanks in advanceIf you only use HTTPS then you should set the secure cookie flag... http://en.wikipedia.org/wiki/HTTP_cookie#Secure_and_HttpOnly
-
I am having trouble with printing from my MacBook Pro. After succesfully installing a printer, sending a print job results in a alert in the print que that says "on hold Authentication Required"
I am fairly new to Mac and have not the slightest clue what I am doing wrong. Please help!
Thanks, SlojonAfter upgrading to OSX Mountain Lion on one of our home computers and having no difficulty with printer access for months, after a glitch involving loss of power, suddenly "On hold (authentication required)" started showing up.
When I deleted the printer and then tried to add it back using the default listing for the printer I got the message "Unable to download the software from the server at this time." I felt I was going backwards. The whole situation was maddening for a couple of days.
Details:
Older G5 Desktop Mac running OSX Snow Leopard wth an HP Color LaserJet 2550 attached via USB.
Early 2011 13" MacBook Pro running OSX Mountain Lion.
Airport WiFi network.
This is really two problems: how to add a printer successfully and how to print without authentication.
How to add a printer
Do not use the default listing for adding the printer that shows up in the popup menu, instead use the generic "Add printer" command, then select the printer and printer type from the secondary menu that comes up. This worked fine for me.
How to avoid the "Authentication required"
Software update on both machines.
Reset printing system (Option & minus "-" key) on both systems.
Add the printer back to the server (older G5 Mac in my case) system.
Ensure that both the printer sharing is selected for the printer and …
… that printer sharing is turned on globally in the Sharing System Preferences
Add the printer back to the client system
I was also able to work this through the CUPS system described in other posts (http://localhost:631) but I always prefer to let Mac OSX handle the UNIX details since I have greater confidence I won't be inadvertantly messing something up. -
Authentication required on Windows Printer
When I set up my windows network printer under leopard, it asked me to type in my user name and password to connect to the server with the windows print spooler. ok, done.
So now, when I print to that shared printer, the documents get hung up in the queue and give the document status as "On Hold (Authentication required)." If I click the document and then click RESUME, it asks me to "Enter your name and password to print to the printer." I do, but the documents do not print and the status in the queue doesn't change.
Anyone know what I'm not doing?
Clayuhoh... just found the solution in another thread here:
http://discussions.apple.com/thread.jspa?messageID=5852413
I have the solution for you.
Prerequisites: 1. your windows PC with the printer on it needs to have an admin account on it with a single word no spaces. (preferred unix) 2. your printer sharename is a single word (ie. Canon iP4300 should be just ip4300).
Now follow the below steps:
1. Open your system preferences > Open Print & Fax
2. Click + to add a printer.
3. Right-click on the Toolbar at the top and select "Customise Toolbar..."
4. Drag the "Advanced" icon to the toolbar & select "Done"
5. Click the "Advanced" icon
6. Select "Windows" from the "Type:" drop down menu
7. In the "URL:" textbox type the location of your windows printer in the format below (use the format depending on whether your Windows PC sharing the Printer has a password or not):
smb://username:password@ipaddress/printersharename <- Print Server does have a password
smb://username@ipaddress/printersharename <- Print Server does NOT have a password
(eg. smb://[email protected]/ip4300)
8. Enter a Name and Location. (Human Friendly Names with Spaces are allowed)
9. Now select the appropriate driver and then click "Add"
10. Try printing somthing and then it will ask for a username and password of your windows server. Type and username and then the password and then add this to your keychain and click OK.
And there you go. Printing in OSX 10.5
Cheers
Ben Camilleri
Camotec Web Solutions
[email protected]+
http://www.camotec.com.au " -
Connecting printer to a secure wireless network which requires both username and password
I have the hp photosmart 6510. I have it in my college dorm, which has a secure network with requires both a user name and password. I need help setting it up as I can't seem to get the printer to enter a username and password. I know the printer works and I know that my computer can print wirelessly with the printer. My college game me this setup configuration.
Configuration Item Preferred Value Optional Value (less preferred)
Network Name of SSID umd-secure
802.1x Operating Mode
(note: 802.11b is no longer supported) Infrastructure or Network (not ad hoc)
Security Mode Enterprise (not Personal)
Network Authentication WPA2 WPA-less prefered
Data Encryption CCMP or AES (TKIP-less prefered)
Roaming Identity or Outer Identity anonymous
Authentication Type or Outer Authentication TTLS (PEAP-Less prefered)
Authentication Protocol or Inner Authentication PAP (MS-CHAPv2-less prefered)
Validate Server Certificate or Verify Server Name Yes
Certificate Issuer or Trusted Root CA Thawte Premium Server CA (Any Trusted CA -less prefered)
Server Name or Certificate Name wireless.umd.edu
Server Name must match YesHi @hatyai ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else -
Apache, authentication required, key not working
I'm trying to set up my PC with Apache Server. If i try to access it from my laptop in our home, it serves on 192.168.1.102 I went to no-ip.biz because we have a dynamic IP here. when i try to remotely access the server, i get a screen that says: Authentication required Enter username and password for "linksys BEFW11S4 V.2" at http://XXXXXX.no-ip.biz (xxx being my subdomain i requested) the screen will not accept any 'admin' or the network key i use. Any advice?
Hi
You should use port forwarding and forward your apache port (usually 80) to the ip address of the machine that has apached installed
Hope this works
Cheers -
Proxy Authentication required(Acess denied)
I created simple java web service (java class with single method it takes two arguments) with SAOP messgae format as document/wrapped using JDeveloper 10.1.3.1.
I created one ESB project in ESB for this same application.
In ESB project i created one Routing service here i givven physical path of WSDL file.
And also i created one SOAP service here i given URL of WSDl file.
After that I register that web service in ESB.Registration was done successfully.
After that I log in to OC4J console, here i able to find my web service under webservices tab.
Now i tested this webservice ,but it is giving some exception proxy Authentication required(Acess denied).
this is Exception
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required ( Access is denied. )
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1714)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1460)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1182)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(Unknown Source)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:869)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:460)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(Unknown Source)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:869)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:460)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required ( Access is denied. )
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1714)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1460)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1182)
... 39 more
</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope>
can any one help me in this case please.
Any help is highly appreciableI got the same issue : runs fine via web test, doesn't work via generated Jdevelopers proxy class. Both machines are within same local network. Tried setting uid/pwd same as oc4j admin crendentials - didn't work :
WARNING: Unable to connect to URL: http://10.75.0.122:8888/ws_1-context-root/WebService1SoapHttpPort due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required
at ws_1.proxy.runtime.WebService1SoapHttp_Stub.echo(WebService1SoapHttp_Stub.java:94)
at ws_1.WebService1SoapHttpPortClient.echo(WebService1SoapHttpPortClient.java:45)
at ws_1.WebService1SoapHttpPortClient.main(WebService1SoapHttpPortClient.java:33)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required
at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:172)
at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:148)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:175)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
at ws_1.proxy.runtime.WebService1SoapHttp_Stub.echo(WebService1SoapHttp_Stub.java:78)
Thank you!
V. -
Hi,
Can someone tell me how I can turn off the network authentication the DBUriServlet pops up when I make a DBUri request like
http://server1:8080/oradb/SCOTT/EMP/ROW[EMPNO=1]/ENAME/text()
I have found the documentation on 'DBUri Security' (XML Database Developers Guide(March2002) - Chapter 12 pg 37) that explains how I can alter the xdbconfig.xml file in order to restrict assess to a specific role... but not any documentation that tells me how to surpress the network authentication altogether.
Thanks
ShaunTry logging in as System and issuing the following command
alter user anonymous identifed by anonymous account unlockThen ensure that anonymous has appropriate permissions on the required tables. Note we do not recommend unlocking anonymous for a production instance....
Better to have some kind of front end application that logs in to the database in a secure manner.. -
Print status "On Hold (Authentication Required)"?
After upgrading to 10.5.2, I am now unable to print to the networked laser printers in the Windows network at work. I can see the printers on the domain, but when I try to print nothing happens. When I look at the print status it says "On Hold (Authentication Required)". Printing worked just fine on Tuesday before the software update. I provide my network password but nothing changes. Does anyone know how to solve this problem?
Is there any way to get access to the beta release? Apple pushing out an update that breaks my ability to print anything on a windows network is a MAJOR roadblock. Deleting the printer queue didn't work. I spent two hours of my free time at the local Genius bar and we did get the CUPS workaround (setup the printer using CUPS) working, although it's a crappy solution since it can expose my domain password to someone who visits the right dialog. (Within this thread, I post what I and the fellow at the Genius Bar--yay Bell Square!--did to get this to work: http://discussions.apple.com/thread.jspa?messageID=7097469#7097469)
Please tell me that Apple will be adding a test case for this into their regression test suite. I'd hate to see this problem crop up in the future. I like using Apple products but I'm worried because I'm seeing a lot of quality issues in the software: Mail doesn't populate the ICalendar automatically with calendar events despite checking that setting, right clicking on an ICalender item in an email doesn't always give you the option to view in ICalendar, editing ICalendar events doesn't always work (edit option missing) until you close and restart ICalendar, problems with IChat which I won't get into right now.
My sense is that these are bugs in features that probably worked at one time during the software life cycle but degraded (regressed). This is definitely the case for printing since it did work in 10.5.1. This leads me to believe that Apple doesn't have a good handle on quality, and also points to that Apple may not be using good agile development practices which would allow them to do quick deliveries (such as test automation).
I as a consumer then suffer. If Apple would like help implementing better software practices such as test driven development, automated unit testing, automated system testing, then please contact me.
I'd love to help a company I admire. You have great vision. Your products are OK, though could great if the quality was better. I hope Apple is using great software practices behind that, but from what I see, it doesn't. Sometimes, when I'm pull into the Apple franchise to enjoy a hamburger, I end up getting one that was made from squirrel meat because of problems in the kitchen.
Squirrel go down nearly as well as beef.
Lance Kind
<Edited by Moderator> -
I changed nothing in my email account, talktalk.net, but can no longer send (server's response, "authentication required) No problem receiving, I am using Mavericks on my MacBookPro. No problem using Cloud, but I want to use my talktalk account as before the problem
I can send and receive using talktalk without any problems using my iPod and iPad.
I would be most grateful for help - in simple form, please, I am an 80 plus female Mac lover!Hello Hazel139,
I found this in one of the similar post hope it helps you.
Level 6 (14,190 points)
X423424X
This helped meRe: Problem SENDING email Jun 17, 2012 1:40 PM (in response to Casanewton)
The error I see is you did not specify the proper authentication for the smtp server.
In the Mail preferences for the account, smtp popup, select Edit SMTP Server List. A sheet will drop down. Select Advanced tab on that sheet. You should, I assume, set the Authentication to password, and set the proper username and password. That's where the poper would be set if 587 is not the one you should be using. Maybe it is. I only bring it up since I see it trying to use port 587.
If you got this stuff already set correctly then I don't know. Mail has a problem in your setup. Maybe delete the account and recreate it from scratch.
https://discussions.apple.com/message/18670442#18670442
Maybe you are looking for
-
How to populate IDOC segments...
Hello Experts, I was just tasked to add new fields in an IDOC segment. My question is, how do I populate those newly created fields? The data will be coming from a purchase order. Thank you guys and take care!
-
I'd like to share my books can we share with other iBook members?
-
When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?
-
Gantt Chart Series bar display problem
Dear colleague Am looking for your help¡K I developed Gantt Chart business graphics exactly as explained in the tutorial, but the result I got just display points instead of displaying bar as shown the graphic pasted in the tutorial. Can you tell wha
-
Hi, I have done a kernel upgrade. After that i could not login to JSPM the following is the error message <!LOGHEADER[START]/> <!HELP[Manual modification of the header may cause parsing problem!]/> <!LOGGINGVERSION[1.5.3.7185 - 630]/> <!NAME[F:\usr\s