Fios Can I use a Dlink 655 rather than the supplied M1424WR ?

I Understand the Actiontec M1424WR is a 802.11g.
I'd like 802.11n for over the air here at my home.
May I simply use a DIR 655 in place of the supplied Actiontec?
Thank you

Note if you have FIOS TV you will have problems. Many hang a router off the supplied MI424WR and use it for everything but the TVs.

Similar Messages

How can I use "t3://becluster:6001" rather than "t3://dcsv02,dcsv01:6001"

          I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic server
          5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          I try to make a t3 connection between the PC and the cluster of machines.
          On the Windows PC I have the following configuration for the
          "c:\windows\system32\drivers\etc\Hosts" :
          171.1.70.61     becluster
          171.1.70.62     becluster
          where
          "171.1.70.61 is dcsv01 and
          171.1.70.62 is dcsv02 "
          If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          I have a great failover mechanism : if any of the machine (dcsv01 or dcsv02) are
          down the requests are routed to the other one.
          BUT!! If I connect my PC to the cluster with :
          hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          I have a not great failover mechanism :
          say that my windows hosts file looks like :
          171.1.70.61(dcsv01)     becluster
          171.1.70.62(dcsv02)     becluster
          then if dcsv02 is down then all requests are routed to dcsv01 and that is fine.
          BUT!! if dcsv01 is down then I got on my PC the
          "Bootstrap unable to get a t3 connection to dcsv01" exception and failover does
          not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          So how can I use
          "t3://beclsuter:6001" rather than
          "t3://dcsv01, dcsv02:6001" with the same failover service????
          Thanks


          Thanks mike,
          In a UNIX or windows environment how can I get a DNS server that round robin?
          "Michael Reiche" <[email protected]> wrote:
          >You need to have becluster defined in a DNS that round-robins.
          >
          >Mike
          >
          >"Martial" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic
          >server
          >> 5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
          >>
          >> I try to make a t3 connection between the PC and the cluster of machines.
          >>
          >> On the Windows PC I have the following configuration for the
          >> "c:\windows\system32\drivers\etc\Hosts" :
          >> 171.1.70.61 becluster
          >> 171.1.70.62 becluster
          >> where
          >> "171.1.70.61 is dcsv01 and
          >> 171.1.70.62 is dcsv02 "
          >>
          >> If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
          >> I have a great failover mechanism : if any of the machine (dcsv01 or
          >dcsv02) are
          >> down the requests are routed to the other one.
          >>
          >> BUT!! If I connect my PC to the cluster with :
          >> hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
          >> I have a not great failover mechanism :
          >> say that my windows hosts file looks like :
          >> ..
          >> 171.1.70.61(dcsv01) becluster
          >> 171.1.70.62(dcsv02) becluster
          >> ..
          >> then if dcsv02 is down then all requests are routed to dcsv01 and that
          >is
          >fine.
          >> BUT!! if dcsv01 is down then I got on my PC the
          >> "Bootstrap unable to get a t3 connection to dcsv01" exception and failover
          >does
          >> not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
          >> So how can I use
          >> "t3://beclsuter:6001" rather than
          >> "t3://dcsv01, dcsv02:6001" with the same failover service????
          >>
          >> Thanks
          >>
          >>
          >>
          >
          >

When recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?

when recording a video using quicktime and my built in camera (isight) how come the program wont let me use my audio interface rather than the built in mike?
The basic answer is that Apple has not programmed the capture routine with this capability. As such, you can always send QT feedback requesting this feature be added as a future enhancement.

HT201976 With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

With Family sharing can you share specific iTunes Playlists rather than the complete library?

HT201976 With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

With Home sharing can you share specific iTunes Playlists rather than the complete library?

How do I download a campaign font for use in iBooks Authoring rather than the standard fonts available?

Is it possible to use a campaign font when authoring an iBook rather than the standard font menu?

The font menu in the toolbar includes supported iOS fonts on the iPad. You are obligated to work with those fonts only.
While apps have a way to add additional fonts, iBooks Author does not provide support otherwise, sorry.
As an alternative, you can use any font you like and generate an image instead.

Can I use a SD Card rather than a USB stick when using Lion Recovery Disk Assistant

I'm using a MB Pro 2010, can I use a SD Card in the SD Card slot rather than a USB stick when using Lion Recovery Disk Assistant. I would like to use the 16GB chip with a single 1GB partition so I can dump a bunch of other backup stuff into the same chipper.

Yes, you could certainly do that, provided you have a card reader or an SD card slot available on both Macs and what you are copying is smaller than the capacity of your SD card.
But that's an awfully slow way to transfer GB's of files. 32GB SD cards cost anywhere from about $20 to $90 and of course the cheaper cards will be the slowest cards. Also need to consider that your iPhoto, iTunes and especially iMovie libraries may be larger than your SD card's capacity, and there is no easy way to 'split' them to save partial libraries and reassemble them on your new Mac.
A better solution is an external hard drive connected via FW or USB2. Much faster and without the capacity limit of an SD card. For example, you could get a 500GB OWC Mercury Elite Pro mini drive (5400 rpm) for $115 and after you are done using it for file transfer it would be a nice backup drive. Or build your own with an OWC mini case and a 500GB WD Scorpio 7200 rpm drive for about $120. Both support eSATA, FW400/800 and USB2.
Or you could just network the two Macs together and use the Finder to transfer files that way. Cheap, fast, and it works.

Can I use a netgear DG834N rather than HH with inf...

I'm either really stupid, or my HH is not performing as I would expect.
The firewall doesn't seem to want to trun off, port forwarding appears to be intermittent, DMZ doesn't seem to work as documented.
Is it possible to switch back to my old router ? I realise that I need to keep the infinity modem thingy in place.
Any thoughts >
Thanks in advance.
Cheers
Dave#...
Solved!
Go to Solution.

not what I wnated to hear, but exactly what I expected
Many Thanks

I want to change my name on my outgoing ID. I want to use my professional name rather than the name i use only for legal purposes as that is how people know me

my friends and clients know me as Jeanette Vonier
this is also on all my bank accounts
I use my birth name Jeanette Stringham only for legal documents and credit cards.
I prefer to have my professional name Jeanette Vonier show as my id on messages.
however the thunderbird mail through gandhi.net inserted the professional id instead and I cannot figure out how to change that. as a consequence my emails may be flagged as spam or go unopened.
please advise how I may correct that and change the name showing up.

The way to change what ever people see when they get your email is to set up your email the way you want to. '''Modzilla''' defaults to the name that you use for your computer.
'''Open Modzilla''' go to tools then '''account settings''' When that page opens you will see your name as it appears on your email and your email address you can change any of this if you want and even create a signature which can be really cool if you know some basic HTML

Can I use other mobile phonne other than the iphone to connect to airport extreme?

If so how can I configure my airport?

If your mobile phone is Wi-Fi capable (not just 3G or 4G), then it should be able to connect to the AirPort's wireless network just as it would to any Wi-Fi network. No additional configuration changes should be necessary on the AirPort router.

Why use Protected Overide Sub OnPaint rather than the standard Paint_Event ?

I notice many good programmers use this following method rather than the usual Paint_Event when painting to the form.
Protected Overrides Sub OnPaint(e As PaintEventArgs)
Dim g As Graphics = e.Graphics
g.SmoothingMode = Drawing2D.SmoothingMode.HighQuality
g.InterpolationMode = Drawing2D.InterpolationMode.HighQualityBicubic
MyBase.OnPaint(e)
End Sub
Can anybody share the reasons why? Thanks
Top Tip: Toothache? Cut paper towel to 2"square. Smear with olive oil. Sprinkle on Cayenne Pepper. Fold over few times to form small wad. Tuck in between wall of mouth and gum. Leave 1 - 2 hrs. You will thank me!

OK Crazypennie, maybe you are right. I tend to rant on a bit sometimes.
Also, maybe the jumpy graphics is made worse because the animation output is not synced with the video hardware refresh rate. We can get around that slightly by using a very high fps.
Hi Leon,
I tried modifying your code using a GraphicsFrame class that I wrote a little while back, the class utilizes the bufferedcontext/bufferedgraphics, instead of using the forms graphics directly. In theory, all objects should be rendered to the buffer before
the forms graphics object. Is this less glitchy/faster on your pc? It seemed less glitchy/faster on mine..., and previous benchmarks show that using buffered graphics in this manner improved render time.
You can read the discussion on
this thread.
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form11 ' drawing Code by Paul Ishak Apr 2015 A spinning pie chart. My timing code.
Private Angle As Single = 100
Private NextIncrement As Single = 1
Private Randomizer As New Random(Now.Millisecond)
Private SliceColors As New List(Of Color)
Private SlicesOnWheel As Integer = 24
Private Velocity As Single = 0
Private WheelRadius As Integer = 300
Private WheelLocation As New Point(50, 50)
Private SW As New Stopwatch
Private SFlag As Boolean ' wheel is currently spinning
Private CntMS As Integer ' count the milliseconds
Protected Overrides Sub OnPaint(e As PaintEventArgs)
Dim gFrame As New GraphicsFrame(e.Graphics, Me.ClientRectangle.Size)
Dim g As Graphics = gFrame.Graphics
g.SmoothingMode = Drawing2D.SmoothingMode.HighQuality
g.InterpolationMode = Drawing2D.InterpolationMode.HighQualityBicubic
g.Clear(Me.BackColor)
Dim sliceAngle As Single = CSng(360 / SlicesOnWheel)
Dim rect As New Rectangle(WheelLocation, New Size(WheelRadius, WheelRadius))
Dim curveWidth As Integer = CInt(WheelRadius - (WheelRadius / (2.0! * 0.9)))
Dim rect2 As New Rectangle(rect.Left + curveWidth, rect.Top + curveWidth, rect.Width - curveWidth * 2, rect.Height - curveWidth * 2)
Dim inc As UInteger = UInteger.MaxValue \ 360
For I As Single = 0 To 359 Step sliceAngle
g.FillPie(New SolidBrush(SliceColors(CInt(I / sliceAngle))), rect, I + NormalizeAngle(Angle), sliceAngle)
g.DrawPie(Pens.White, rect, I + NormalizeAngle(Angle), sliceAngle)
Next
g.FillEllipse(Brushes.Black, rect2)
g.DrawEllipse(Pens.White, rect2)
g.DrawEllipse(Pens.White, rect)
MyBase.OnPaint(e)
If SFlag Then
If Me.Text = " " Then Me.Text = "" Else Me.Text = " "
End If
gFrame.Render()
gFrame.Dispose()
MyBase.OnPaint(e)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles btnSpin.Click
If Not SFlag Then
Velocity = Randomizer.Next(3, 5)
NextIncrement = Velocity
SFlag = True
CntMS = 0 : SW.Reset() : SW.Start()
If Me.Text = " " Then Me.Text = "" Else Me.Text = " "
End If
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.DoubleBuffered = True
SliceColors.Add(Color.Black)
SliceColors.Add(Color.LightBlue)
SliceColors.Add(Color.SeaGreen)
SliceColors.Add(Color.Yellow)
SliceColors.Add(Color.Red)
SliceColors.Add(Color.LightBlue)
SliceColors.Add(Color.Orange)
SliceColors.Add(Color.Violet)
SliceColors.Add(Color.Yellow)
SliceColors.Add(Color.Black)
SliceColors.Add(Color.Green)
SliceColors.Add(Color.Black)
SliceColors.Add(Color.Green)
SliceColors.Add(Color.Red)
SliceColors.Add(Color.Blue)
SliceColors.Add(Color.SeaGreen)
SliceColors.Add(Color.Pink)
SliceColors.Add(Color.Black)
SliceColors.Add(Color.Purple)
SliceColors.Add(Color.SkyBlue)
SliceColors.Add(Color.Aqua)
SliceColors.Add(Color.White)
SliceColors.Add(Color.Red)
SliceColors.Add(Color.Blue)
SliceColors.Add(Color.Pink)
SliceColors.Add(Color.SeaGreen)
SliceColors.Add(Color.Orange)
ClientSize = New Size(375, 375)
Me.Show()
btnSpin.Refresh()
End Sub
Public Function NormalizeAngle(value As Single) As Single
Return value Mod 360.0!
End Function
Private Sub Form11_TextChanged(sender As Object, e As EventArgs) Handles Me.TextChanged
If Not SFlag Then Exit Sub
Angle = NormalizeAngle(Angle + NextIncrement)
NextIncrement = CSng(NextIncrement - 0.0033)
If NextIncrement <= 0.0033 Then
SFlag = False : SW.Stop() : Exit Sub
End If
Invalidate()
CntMS += 5 ' <<< set timer interval here <<<
Do Until SW.ElapsedMilliseconds > CntMS
Loop
End Sub
End Class
Public Class GraphicsFrame
Implements IDisposable
Private disposedValue As Boolean
Private BackBuffer As System.Drawing.BufferedGraphics = Nothing
Public ReadOnly Property Graphics() As System.Drawing.Graphics
Get
Return Me.BackBuffer.Graphics
End Get
End Property
Public Sub New(ByVal canvas As System.Windows.Forms.Control)
BufferedGraphicsManager.Current.MaximumBuffer = New Size(canvas.ClientRectangle.Width + 1, canvas.ClientRectangle.Height + 1)
Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(canvas.CreateGraphics, New Rectangle(0, 0, canvas.ClientRectangle.Width, canvas.ClientRectangle.Height))
End Sub
Public Sub New(ByVal canvasGraphics As Graphics, maximumBuffer As Size)
BufferedGraphicsManager.Current.MaximumBuffer = New Size(maximumBuffer.Width + 1, maximumBuffer.Height + 1)
Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(canvasGraphics, New Rectangle(0, 0, maximumBuffer.Width, maximumBuffer.Height))
End Sub
Public Sub New(ByVal handle As IntPtr, maximumBuffer As Size)
BufferedGraphicsManager.Current.MaximumBuffer = New Size(maximumBuffer.Width + 1, maximumBuffer.Height + 1)
Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(Graphics.FromHwnd(handle), New Rectangle(0, 0, maximumBuffer.Width, maximumBuffer.Height))
End Sub
Public Sub New(ByVal canvas As Image)
BufferedGraphicsManager.Current.MaximumBuffer = New Size(canvas.Width + 1, canvas.Height + 1)
Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(Graphics.FromImage(canvas), New Rectangle(0, 0, canvas.Width, canvas.Height))
End Sub
Public Sub New(ByVal canvas As Bitmap)
BufferedGraphicsManager.Current.MaximumBuffer = New Size(canvas.Size.Width + 1, canvas.Size.Height + 1)
Me.BackBuffer = BufferedGraphicsManager.Current.Allocate(Graphics.FromImage(canvas), New Rectangle(0, 0, canvas.Width, canvas.Height))
End Sub
Public Sub Render()
If Not BackBuffer Is Nothing Then BackBuffer.Render()
End Sub
Protected Overridable Sub Dispose(disposing As Boolean)
If Not Me.disposedValue Then
If disposing Then
Me.BackBuffer = Nothing
GC.Collect()
End If
End If
Me.disposedValue = True
End Sub
Public Sub Dispose() Implements IDisposable.Dispose
Dispose(True)
GC.SuppressFinalize(Me)
End Sub
End Class
Don't forget to vote for Helpful Posts and
Mark Answers!
*This post does not reflect the opinion of Microsoft, or its employees.

I am trying to sync my iPhone iMessages to my MacBook Air using my phone number rather than my email address as my messages on my phone come through to my phone number. My husband has been able to set it up, accidentally I think, but I can't seem to.

I am trying to sync my iPhone iMessages to my MacBook Air using my phone number rather than my email address as my messages on my phone come through to my phone number and not my email address. My husband has been able to set it up, accidentally I think, but I can't seem to.

how to find IMEI, etc
http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US

How can I use the database default time rather than Java supplied time

I've searched over and over and nobody seems to have this issue so maybe its just me!
When inserting a record I would like the a create_date column to automatically use the database time rather than a supplied time via JPA. That was all times a relative to the database which makes sense.
The trouble is I cant figure out how to do this in a sensible manor.
If I specify an column like :
     @Temporal(TemporalType.TIMESTAMP)
     @Column(name = "CREATE_DATE")
     private Date createDate;
and IDL
CREATE_DATE TIMESTAMP WITH TIME ZONE DEFAULT CURRENT_DATE NOT NULL
If I leave createDate null I get an exception. If modify the column to allow Nullable then column is set as Null.
If I leave the column out of the entity bean and then and create a row then the database current time is inserted. The trouble then is that if I want to read the date I'm going to have to create a copy of the bean but with the CREATE_DATE in it, and this doesn't make sense.

I should also mention that TopLink has always supported the ability to retrieve the current time from the database for use in optimistic locking. The TimestampLockingPolicy offers the ability to configure the next value being retrieved from the database instead of using the local time from the JVM. Our extended optimistic locking configuration does not currently support setting this option but it could be done using a descriptor customizer which can be configured in your persistence unit properties.
Using optimistic locking may be a good solution for the last modified date since it will also ensure that you do not corrupt the database if someone else has incremented this value since your last read.
Doug

Can I use thumbnails rather than the {sitename} to load different galleries?

Hi all-
I'm new to Spry and all things Javascripting but I'm attempting to construct a image gallery using Spry in Dreamweaver CS3. I've used the "Original Photo Gallery" from the Spry Demo folder as a jumping off point and everything works correctly.
I would like to know if it is possible to use representative thumbnails rather than the select dropdown to launch the different galleries? I'm sure it is, but I'm a total neophyte and have no idea what to do. I'd like to set up a AP Div with 9 thumbnails in a table that would each launch a different gallery. How do I do that?
Jimmy

Hello, because you're SELECTing tournament.tourtype in the SELECT list, the answer is not really. If you didn't need t.tourtype in the SELECT list, you could have:
select m.memberid, m.lastname, m.firstname
from member m
where exists (select 1
        from entry e inner join tournament t on (e.tourid=t.tourid)
        where m.memberid=e.memberid
            and upper(t.tourtype)='OPEN');And you know the t.tourtype is 'OPEN' anyway, so you don't need to SELECT it. So you could have this, and the answer is yes:
select m.memberid, m.lastname, m.firstname, 'OPEN' tourtype
from member m
where exists (select 1
        from entry e inner join tournament t on (e.tourid=t.tourid)
        where m.memberid=e.memberid
            and upper(t.tourtype)='OPEN');Edited by: SeánMacGC on May 7, 2009 2:09 AM

How can I make ringtones show in my Tones tab rather than the Music tab?

I just bought my first iPhone 4 and uploaded a bunch of music ringtone files to iTunes and changed the default preference to display the Tones tab. However, the ringtones all got added to the Music tab rather than the Tones tab. I have a number of questions:
I'm used to other phones where any music file can be set as a ringtone for a particular contact. Is this the case for iPhones too?
If so, how can I set a ringtone for a contact from these music files?
If not, how can I get the ringtones to appear in the Tones tab? I assume that I would have to do that to sync ringtones to my iPhone ringtone "folder".
Is there another alternative? I read on the forum something about dragging ringtone files to the iPhone. Not sure I understood that! Does this mean I can drag a music file from the Music tab to the iPhone icon and have that file end up in the iPhone ringtone "folder"? If it ends up in the Music "folder", how do I access it to set it as a contact ringtone?
Thank you for any light you can shed on this.

It would be good if this was made a user-defined Option (Tools -> Options -> Tabs) in the next update of Firefox rather than having to install an add-on. I currently keep Firefox open to view my Accuweather.com add-on running or because I know that I will be returning to Firefox in short order. (I do close Firefox if I have visited a sensitive or secure site to ensure better security.) Every time I want to go to a bookmark, I must open a new "(Untitled)" tab before selecting my bookmark using the keyboard (I'm a dedicated keystroker; it's much faster for me). This way, when I close the website, I have an "(Untitled)" tab displaying so that Firefox doesn't close. Why can't I set an Option parameter that will result in me not having to go through this? Alternatively, allow users to set an option to keep Firefox loaded and open in the event only one tab is open and maybe if only one Firefox application window is running (I avoid having more than one Firefox window open as much as possible). I've addressed this last issue in the past but have seen no change when one closes the last tab in a Firefox window. As general practice, I would think that Firefox would run better if options, like I have described above, were part of the Firefox application code and not given to needing an add-on which may cause instability in Firefox as they have in the past, even with author verification and certification.

Fios Can I use a Dlink 655 rather than the supplied M1424WR ?

Similar Messages

Maybe you are looking for