FIOS local channels SD not available - 20147

Is anybody else finding that their local SD channels (below say channel 10) are not available yet their corresponding HD ones are fine?

I responded to your identical post at http://forums.verizon.com/t5/FiOS-TV-Programming/Local-Weather-Channel-Not-Available-on-SD-STB/m-p/4...
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

Favorite channel guide not available

My favorite channel guide not available on two TV sets.I have unplugged the power from the box w/o any luck. This has been occuring for several weeks. Please help.

This is usually a communication issue back to the X1 servers... if you would like some help from the users of the forums, can you post your Upstream Power Level, your SNR and your downstream power levels for others gto see and comment on? You undoubtedly may need a TECH onsite to clean up your signals, but posting those levels here can confirm this.

Local channels only - bad signal

All of my local channels (Dallas - 4,5,8,11,13...) have a bad signal. It's the same on both the HD and Standard Def set top boxes. The signal is like the days when during a storm, the satelllite dish would flicker and skip. It's doing this on Fios local channels only. I've checked all connections of the coax cables, both connectors and connections at all equipment.
DPJ

If it's happening on all boxes in the house, then it sounds like an issue with the main splitter or the ONT itself. I have sent you a private message to get more information from you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Many channels missing/not loading

Many of my SD and HD are not loading or are missing. When I tune to the channel I get a blank screen which eventually kicks to a verizon service agent screen that "checks for blackouts" and then comes back to tell me the channel is not available. This is happening on too many channels to list. I've reset the box twice and worked through the online trouble shooting to no avail.
Verizon, get this fixed before I cancel on you.

hi, are you in calif? i am, and so far mine are all o.k.

Why doesn't U-verse have out of state local channels?

Dish Network has out of state local channels. Why doesn't U-verse have out of state local channels?

That Don Guy wrote:
I can think of a couple of reasons.
First, if U-Verse had to carry every channel everywhere - even if it was just limited to its service areas (so, for example, there would be no local channels from Seattle available) - imagine how many channels that would require.
Second, and probably the real reason, is something called "broadcast exclusivity." The short version is, each network affiliate has an area over which it is supposed to be the only station that shows a network's programs - for example, viewers in Los Angeles should be able to get ABC shows only on KABC. This makes sure that people in that area will watch that station - and, more importantly for the station, its local commercials. I am under the impression that there is a similar rule involving syndicated programming - for example, two different stations in the same area can't show Wheel of Fortune or repeats of Modern Family. (For some reason, I have seen this implemented differently on different systems; for example, when I lived near Travis Air Force Base, about halfway between San Francisco and Sacramento, I got both cities' stations for all four major networks on Xfinity.) This would be almost impossible to enforce if every household got every channel, as it has to be handled on a city-by-city basis.
There's also the problem of time zones - I don't think network affiliates in the Pacific time zone would like it if people could watch the network's Eastern or Central time zone affiliates and see the shows three hours earlier.
And I haven't even mentioned sports exclusivity yet. Remember, the NFL has a rule where the city hosting a Sunday afternoon game cannot show any other game on TV at the same time (there used to be exceptions when the game was blacked out, but the NFL has gotten rid of its blackout rule for the 2015 season). I seriously doubt the NFL would allow U-Verse to get around this by letting every U-Verse subscriber watch their choice of evert CBS and Fox station.
That reminds me of a particular situation from 2001-2002 that I was in:
My local FOX affilliate used to show Simpsons repeats at 5 and 5:30. There is a channel out of Cleveland that was available on Time Warner Columbus (later Mid-Ohio) that would also show Simpsons repeats at 6 and 6:30. Well, about 3-4 counties east of Columbus, it was the same TW lineup as in Columbus (with an exception to have two NBC affiliates, Columbus and a nearby city), but they had the full two hours of Simpsons. Travel to Columbus and you only got the first hour.
The odd thing? That second hour started more like 5:58 PM and the blackout infomercials didn't come on until 6...just enough time for me to tell what episode it was.
And since the episodes were all basically picked by the local station, sometimes there was a case of "We just saw that episode a few days ago!"
The Cleveland station would sometimes dig a little "deeper" into the archives which was nice.

Why is the Fios mobile app not available in the App Store?

Why is the Fios mobile app not available in the App Store?

Sorry to say but they have. And even advertised it on their home page as recently as today. You can view about 70 different channels on your iPhone or iPad. Anyone else out there who knows the answer?

Local channels on Fios app

When I first signed up for fios I was able to view all local channels (cbs, nbc, fox, etc) on the fios app on the iPad. Now for whatever reason it says I'm not subscribed. Is anyone else having this issue????

Have the same issue on the iPad no longer being subscribed to ~15 local channels since the Thanksgiving app update. Worked great before then. Submitted a ticket and have followed up several times, but told it is being worked on by the app Team. Loaded the app on another iPad and removed app/rebooted several times, but same result.

Channel not available. and bad gateway

TO add to our new fios installation woes we are now getting channel not available error on one of our boxes as well as the bad gateway error.
I discontected all the coax and reconeted and tried all the trouble shooting steps.. any advice?
Thanks
I should add this is only happening on a few channels that i can find. syfi hd is one. ALso im not seeing this issue on our main box.
UPDATE: channel not available fixed by tech who installed the proper spiltters.

Glad to hear the channel issue is fixed. We would like to help with the gateway problem. I need to get come circuit information from you. I have sent you a private message to get more information.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

I want to play an episode from channel seven but keep getting message not available in this region - but it is

GOing bananas trying to play an episode from channel 7 in Perth. Tryed using Photon for flash and ads play but not main event. Get a message not available in your region.
HOw can I catch up with my favorite programs? Tv station recommends I change my IP address but I don't know how to do that or to change it to what. Love some ideas. Thanks, Lou

Thank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane

Deployed application from NWDS not available in local folder for IView crea

Hi Gurus,
I have deployed an Web Dynpro Java application from NWDS. The application deployed fine.
But when I tried to cretae the Web Dynpro Java application from the Portal the corresponding application is not available in local folder for IView creation.
How do i need to proceed for Web Dynpro Java IView creation.
Thanks & Regards,
Kiran Kumar k

Hi Kiran,
Please check under sap.com/local OR you custom package while creating Web Dynpro Java application iview.
Then select your WD Application if you found - Applcaition >> package >> then select Application name and click on next.
Verify your application deployed or not or in which folder at content administration >> web dynpro >> searh your WD application.
Hope it helps
Regards
Arun

Requested circuit/channel not available

Hello,
I have a problem with a PRI link. We have installed CCM 3.3(3) and a 3745 with a PRI link to the telco. The 3745 is configured as a MGCP gateway. When I try to initiate an outbound call, I get the following Q931 debug message:
*Mar 1 01:47:14.967: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0005
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Calling Party Number i = 0x0081, 'XXXXXXX'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, 'XXXXXXXXXX'
Plan:Unknown, Type:Unknown
*Mar 1 01:47:15.127: ISDN Se3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8005
Cause i = 0x82AC - Requested circuit/channel not available
When I try an inbound call I get a busy signal, and a similar debug message (if I use another router to initiate that ISDN call).
This is the "show ISDN state" screen:
ISDN Serial3/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 L3 Protocol(s) = CCM-MANAGER
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Number of L2 Discards = 1, L2 Session ID = 13
So I presume there is nothing wrong with the signalization??
I contacted the telco person, and he told be that he sees some kind of BLOCKING state on our side of the PRI link.
Please help or give at least some guidelines what to try next!
Thanks in advance...

Haha, 11 years later this post save us on CUCM 8.6.2, disabled "Inhibit restarts at PRI initialization" Works Excellent on the E1 affected.
THANKS A LOOOT.

Some DCs are not available locally - NWDS error while importing Track confg

Hi,
We have configured NWDI in our landscape.
As per the requirement of the developers, we have created a new product and software component (SC) in SLD, as they don't want to use any standard components.
The same has been synced with CMS using update CMS.
Now a new track is created (in landscape configurator) and the new SC has been added to the track. Track creation was successfull....given the sdm passwords for all 3 systems.
While saving a pop-up came saying that as the SC is New (i did not select the developed option), I need to Check-in and Import into DEV manually.....I GOT STUCK HERE.
What files needs to be checked-in in Transport studio?
Also when developers are trying to import the configuration in their respoective NWDS...they are getting "Some DCs are not available locally" error.
Also updated the patch of their NWDS but still no use.
Could any one help me out.
Regards,
Siv

Dear Satya,
As per your advise. I have maintianed the 3 dependencies for the SC.
However, the error "Some DCs are not available locally" is still recurring in NWDS.
Below is few line from log,
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Used component not found: sap.com/tc/bi/bp/webDynpro
Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
Build log -
Development Component Build (2009-07-14 18:49:13)
Component name: RIB_SAPPS
Component vendor: sap.com
SC compartment: arg_PRIMAVERACUSTOMIZATION_1
Configuration: EPD_ARG_D
Location: EPD_ARG_D
Source code location: http://den2:50100/dtr/ws/ARG/arg_PRIMAVERACUSTOMIZATION/dev/inactive/DCs/sap.com/RIB_SAPPS/_comp/
DC root folder: C:\Documents and Settings\sa45572\.dtc\1\DCs\sap.com\RIB_SAPPS\_comp\
DC type: Web Dynpro
Host: CMR-2FL0565
DC Model check:
   All used DCs are available locally
   ERROR: Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
   Build failed with errors.
Jul 14, 2009 6:48:50 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/tc/wdp/metamodel/content" for DC "arg_PRIMAVERACUSTOMIZATION_1:sap.com/RIB_SAPPS":Cannot find compartment of used component: sap.com:tc/wdp/metamodel/content
Regards,
Siv

TV Says Channel Not Available

So My TV says channel not available and I called Verzion and they are not able to help me. I pay almost $200 dollars a month for service and I get the run around. I am about to cancel my service if someone doesnt call me back or send a tech out to find out why is it that I am calling twice in one month for the same issue.

One of course is to make sure its a channel you are suppose to get.
Complaining here is just complaining to your Peers. YOu need to follow through with contacting Verizon support. http://www22.verizon.com/content/contactus/

Channel saying programme not available on Vision b...

Hi!
I've been using Vision for past 2months and no issues so far, until around Christmas time. I tried to watch Five USA, one evening and says programme not available. Thinking it was a freeview issue, switched to normal freeview to check and the channel was working perfectly!
Has anyone else's doing the same and are there any fixes?
Thanks, Natalie

Hi NatalieW,
Thanks for posting. I'm sorry for the delay in getting back to you. have you tried re-scanning the channels? Did you manage to resolve the issue? If not drop me an email with your acount details and a link to this thread for reference. You'll find the address in my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Communiocation channel: Value with name asmaBaseFileName not available

Hi friends,
After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels from Communication channel monitoring.
I am getting error for all the channels as follows :
Configuration error: Value with name asmaBaseFileName not available (Software version: 3.0.15)
Kindly guide me how to rectify this issue.
Renu

After upgrade our Dev system to PI 7.1. Whne i try to start the communication channels from Communication channel
monitoring.
Which metadata are the channels using...SAP PI7.0 or SAP PI7.1? If you dont import the metadata of SAP PI7.0 in the PI7.1 system then you may get an error for the communication channels....you should either change the channels to point to PI7.1 or import the metadata in ESR.
@Kiran: The tpz reference you have given seem to be of SAP PI7.11 .... will it also work for SAP PI7.1
Regards,
Abhishek.

FIOS local channels SD not available - 20147

Similar Messages

Maybe you are looking for