FIOS mobile remote control feature suddenly stopped working

The remote control feature in the new FIOS Mobile app was working superbly this morning and now it doesn't recognized either of my STBs. Any solutions?
Thanks

Some nokia made remotes have a small battery inside (the one that's supplied with the N95 does) and it may have run out.
If you don't want to open the remote to check then you should take it to a nokia care point/service centre.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Similar Messages

Navigation and other features suddenly stopped working after I upgraded to FF4.

A day or two after I upgraded from FF 3.6 to FF4, all the ordinary navigation features stopped working. Backspace/alt-<, even the back and forward arrows, Crtl-R to reload a page, and the address field doesn't show the current URL unless I click the identify information icon. All very odd. None of the keyboard shortcuts work.
My bookmark toolbar does not load automatically, although I guess that Vista is the source of that issue.

Doing a downgrade is not anything I have done or feel comfortable with. Is there a clean procedure to accomplish this?

FIOS mobile remote dvr manager doesnt work on my tablet

Can anyone explain to me why the fios mobile remote DVR manager won't work on my Nexus 10, claiming that my user ID or password isn't recognized when I know its the correct username and password? The remote control part works just fine, and I'm on my in home wifi as provided by my verizon supplied router. My Galaxy Nexus has no problem at all with a mobile remote and DVR manager. It seems to me, that if the thing more or less works you should at least be able to login regardless of which Android platform I'm running it on.

You might want to contact the developers of the application directly for your question. You can also try the Verizon Residential Forum http://forum.verizon.com to ask the other users of the DVR manager.

Unable to use FiOS Mobile Remote App on Samsung Galaxy Tab 2

I'm one of the holdout Blackberry customers who Verizon doesn't recognize as wanting apps anymore. I finally broke down and bought an Android tablet device when I saw the FiOS Mobile Remote App and recognized it as an easy solution for controling my multiple HD STBs in my "Man Cave". Unfortunately, the app has been completely useless.
The app loads fine. I'm able to register each HD STB with the app, however doing anything more than the initial set-up for the remote function results in a crash. Every time I attempt to use it, I get the message "Unfortunately, FiOS Remote has stopped." I will occassionally see the attempted connection displayed on the corner of my TV screen.
All other functions of the app work, including the DVR function.
I've reported this failure for months, using the handy little report button below the crash message. No response.
I've commented on this topic in threads from other users with the same problem. No response.
I've posted to the comments section of the Google Play store. No response.
Please, would someone from Verizon acknowledge this problem exists? My best theory so far is that my tablet device is not on a Verizon data plan (WiFi only), so therefore Verizon isn't interested in supporting it (or this loyal customer).
Device is Samsung Galaxy Tab 2, 7.0, running Android 4.0.4. All FiOs STBs replaced with latest generation.

I am sorry to hear about the troubles you are having with the app. We try to make the app as compatible with all devices as possible. The full list of devices the mobile remote is compatible with is https://www22.verizon.com/OnDemand/unprotected/AboutFlexView.aspx . You may find there may be devices that do work with it that re not on the list, but these are all verified working devices with the app. Since yours doesn't appear to be on the list, we can not gaurantee it will work. Submitting all the feedback has gotten word back to Verizon about the troubles you are having. You can also submit this to the Verizon Idea Exchange. Please search on the idea exchange and cast your vote. There may be another member who made the same suggestion. If not, please add a new idea so your fellow community members can comment and vote on your suggestion. http://forums.verizon.com/t5/Verizon-Idea-Exchange/ct-p/ideaexchange . The Verizon Idea Exchange is there for you to submit your ideas and suggestions to Verizon so that we can consider them as we innovate our products and services.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Satellite L300 - Built In webcam suddenly stopped working

Hello,
I have a Toshiba Satellite L300 with a built in 2.0 USB camera and a windows 7 operating system, the camera suddenly stopped working since about 2-3 weeks ago with unknown reason!
I already tried system restore, un-installing and re-installing the camera driver, preformed a full scan by kaspersky internet antivirus 2012 (up to date), and I also ran a complete system and drivers troubleshooting ... and the problem still exists ...
When I use the windows live movie maker it gives me an error saying: cant record audio or video from the selected device. Make sure that the device you're trying to use is installed properly and not currently in use by another program.
The microphone works well on skype but the camera doesn't open!
Please tell me how to fix it, what am I missing?

> webcam appears in the device manager
Is it marked with an yellow exclamation mark?
Usually if the webcam software has been installed, you should be able to start this software going to:
All Programs -> Toshiba
There you should find the webcam software check if you can use and control the webcam after this software has been started normally the webcam control bar should pop up if you would move the mouse cursor above the upper display area PS: the bar can be moved to other area too; left right or bottom

My 12 year old Canoscan 8800f has suddenly stopped working.

My 12 year old Canoscan 8800f has suddenly stopped working. When I press the power button a light comes on inside, but after a bit of whiring it goes out and the scanner switches off. Is there a solution or should I buy a new scanner?
Solved!
Go to Solution.

I would still get a new one. They aren't too expensive and they have added a lot of features such as LED bulbs and instant on.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

Speakers suddenly stopped working

my sounds suddenly stopped working. After talking to a couple of knowledgeable people, I uninstalled the Realteck audio driver, and then I had decent sound coming through the speakers ! This is for an HP desktop, a6750y
So then I tried to re-install the driver. Although the driver had the same file name, it was newer than the one previously on the system, so I re-installed it, and once again, no sound. So I uninstalled this version, but now I have no sound !!!!
I do get sound through the headphones.
here's what I installed, but it's not working.
This question was solved.
View Solution.

William, welcome to the forum.
Have you checked in "Control Panel / Sound" to assure that your sound device is selected as the default? I have had this happen to me many times over the years; especially, if I have made changes of any kind to my computer.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Sound suddenly stopped working.

Hi, my sound on my HP ENVY 15 Notebook PC just suddenly stopped working the other day. Everything says that it is functioning, and my drivers are up to date, but I cannot seem to get the sound to work out of my speakers or out of headphones.
Product Number: A9P60UA#ABA
Running Windows 7 Home Premium 64-bit
If you could help, that would be wonderful! Thanks!

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56900.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete,download and reinstall the Chipset driver on the link below.
Chipset Driver - Windows 7.
When this has completed, shut down the notebook, unplug the AC Adapter and then hold down the Power and Beats buttons for 10 seconds. When done, reconnect the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My Ipod Touch's (5G) earpod controls have just stopped working, and device becomes warm/hot.

Hi. Yesterday my Ipod Touch's (5G) has suddenly stopped working with Apple's earpod controls. Furthermore when playing music with the screen off the device becomes warm or even hot, and the battery drains from a full charge to empty in about 4 or 5 hours. (This is with the screen turned off.) The near overheating happens during music playback whether using Apple's earpods or third party earbuds lacking inline controls. If I stop the music playback the device quickly cools off again.
I've checked the forums, but couldn't find anything that helps. Rebooted numerous times - it did not help. Cleaning earbud socket repeatedly and blowing out with airgun did not help. Tried two different sets of earbuds (both sets worked in another device), so it's not the earpods. Is something stuck, causing a short, negating the controls and leading to quick battery drain during music playback?

I can't think of anything being stuck in the hedphone jack causing the problem
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My Adobe Acrobat X (CS6) suddenly stopped working!

My Adobe Acrobat X (CS6) suddenly stopped working, I can't open or edit documents. I am on Windows 8.1, this just started happening yesterday. I have re-installed it to repair any possible problems, I am a registered user. Please help me!! Can't submit my assignments if I can't use my product!

The license info would be on the jewel case or CD that you got from the university. If it was downloaded, they typically provide the license key in that process that you have to write down or copy. As long as you are still covered under the license, maybe another individual has the license key available. It would be appropriate for them to ask for confirmation on your payment of the license fee or whatever process the university has.
In the meantime, go to the Start>Control Panel>Programs & ... When the program list comes up search for Acrobat.exe and do a repair.

My hot corners suddenly stopped working. settings are correct. os 10.6.8

my hot corners suddenly stopped working. settings are correct. os 10.6.8

Here are the specificatons required for ML.
Full specifications for ML features are here.

Can't set up FiOS Mobile Remote app for iPad

I was able to register the FiOS Mobile Remote app for iPad with my login and password but I'm not able to set it up.
I follow the instructions to
click Menu
click Widgets
click FiOS Mobile Remote
I get the following error message:
Mobile Remote
Network Error
Unable to process your request at this time.
Please try again.
If the broblem continues, please try restarting your Set-Top Box
I've turned off the power to the cable twice but still get the same message.
How can I get the app working?

I installed my new DVRs last night and tried to reactive the Mobile Remote app, but got the same error. I wonder if they're having issue with the app (so it's probably not just you).

My loader has suddenly stopped working

hello;
I have a flash movie that has been working fine. Yesterday a particular Loader process has started failing.
method A - I have been loading the png from: http://www.keleia.com/dev/apps/facebook/PuzzleTour/clients/templa/skin/puzzle_marquee_SLO. png .. yesterday that stopped working BUT my other loaders were working.
method B - So I tried their path-building method: http://keleia.com/dev/apps/facebook/PuzzleTour/flash/../clients/templa/skin/puzzle_marquee _SLO.png ... and it works ... notice no 'www' and also a directory dip '/flash/../'
These 2 paths point to the same place.
However if I use the A for the many other loaders, it's fine.
Furthermore, this is only happening on my remote server. My local hasn't been affected.
QUESTION: why might A suddenly stop working on one particular loading process?
thanks,
Shannon

kglad, thanks for responding ... any thoughts as to why this might have started spontaneously ... I did upload a joomla site to my server 2 days ago ( it is in a very different directory however ) ... maybe the joomla package affected php.ini ( is that even possible ).

HDMI port on Macbook Pro suddenly stopped working. How much is it to fix?

HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?

No one here can tell you what the prices are to repair things. We are just users such as yourself.
What makes you think your HDMI port is dead?
You can take it to a Genius Bar for a FREE diagnosis, make an appointment first.
http://www.apple.com/retail/geniusbar
Also check system preferences/Displays make sure that you have all the correct settings.
Check that the cable you are using is good.
Make sure the display you are connecting to is set correctly.
Check here:
http://support.apple.com/kb/ht1573
Try resettind SMC:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
. RESET PRAM:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.

Java in suddenly stopped working. Help?

Java in suddenly stopped working. Get "inactive plugin". Things were fine yesterday. Checked Java preference and everthing looks fine. Running os 10.6.8. Does anyone have a fix?

The recently released Java 7 Update 11 has been blocked by Apple through its XProtect anti-malware feature in OS X.
Oracle issued the latest update to Java earlier this month to fix a serious zero-day security flaw. The threat was so serious that the U.S. Department of Homeland Security had recommended that all Java 7 users disable or uninstall the software until a patch was issued.
Apple took action on its own and quietly disabled the plugin through its OS X anti-malware system. And as noted by MacGeneration on Thursday, Apple has again updated its OS X XProtect list, this time to block Java 7 Update 11.
Because Oracle has yet to issue a newer version of Java that addresses any outstanding issues, Mac users are prevented from running Java on their system.
Over the last few years, Apple has moved to gradually remove Java from OS X. The Mac maker dropped the Java runtime from the default installation for OS X 10.7 Lion when the operating system update launched in 2010. Java vulnerabilities have been a common exploit used by malicious hackers looking to exploit the OS X platform.
Most notably, the "Flashback" trojan that spread last year was said to have infected as many as 600,000 Macs worldwide at its peak. Apple addressed the issue by releasing a removal tool specifically tailored for the malware, and also disabled the Java runtime in its Safari web browser starting with version 5.1.7.
Javascript should not be disabled (it has nothing to do with Java).

FIOS mobile remote control feature suddenly stopped working

Similar Messages

Maybe you are looking for