Fios Quantum not working with Late 2012 Mac Mini

A new router came out from Verizon in late 2014 so I went ahead and upgraded for $150.  After connecting 3 iPhones, an iPad, and 2 Windows laptops successfully I discovered that my Late 2012 Mac Mini would not work. 
Found a random blog post about channel settings, and after some tinkering got it to work.  Basically you need to change the channel settings from Auto to alternate values.  The blog I found said to use 1,6, or 11 for 2.4ghz and a low value for 5ghz.  I tried a few and ended up with channel 6 and 40 as a working pair.  Thought I would share.

I thought about your dilemma while ASC was down, that's good news your welcome!
I spent some of the time replacing the 320GB 5400rpm HD in my 2010 Mac Mini with a 500GB Hitachi Travelstar 7200rpm HD. Then moved forward by Restoring Mountain Lion onto it from an External HD, instead of Snow Leopard from the original 5400rpm drive. I really prefer to keep my music and photos on the Internal HD and so I couldn't justify the cost of a larger SSD.
So basically I flip flopped and now running Mountain Lion on a larger/slightly faster Internal HD and Snow Leopard from a FireWire External HD when needed.

Similar Messages

  • Thunderbolt Port problem with (Late 2012) Mac Mini

    I am connecting a (Late 2012) Mac Mini to an HP 2311xi monitor with a MiniDisplayPort-to-DVI-D cable plugged into the Thunderbolt port.
    After the connection, the Thunderbolt bus Port Status in Systems Information states "No device connected".
    However, the monitor works fine, just as well as when I am connected to the HDMI port (but without the blinking screen...).
    The problem is that the TB port drops the video signal when I put the Mini to sleep. The monitor will not go into sleep mode (as it does with the HDMI connection) but flashes "No signal" which seems to wake up my Mini's hard drive. It spins up but there is nothing on the screen.
    I'd appreciate any help on this, including the mystery of why there is "No device Connected" in Systems Information.
    Thanks in advance.

    I thought about your dilemma while ASC was down, that's good news your welcome!
    I spent some of the time replacing the 320GB 5400rpm HD in my 2010 Mac Mini with a 500GB Hitachi Travelstar 7200rpm HD. Then moved forward by Restoring Mountain Lion onto it from an External HD, instead of Snow Leopard from the original 5400rpm drive. I really prefer to keep my music and photos on the Internal HD and so I couldn't justify the cost of a larger SSD.
    So basically I flip flopped and now running Mountain Lion on a larger/slightly faster Internal HD and Snow Leopard from a FireWire External HD when needed.

  • Which usb 3 hubs really work with a 2012 Mac mini?

    Which usb 3 hubs really work with a late 2012 Mac mini?

    http://www.amazon.com/gp/product/B00ADM79N6?gclid=CNr-ta3hnLkCFcdxQgodLH0AGg
    I use that one - 2 DVD drives, 2 external HDD, Webcam, keyboard/mouse and 2 flash drives... all really fast.

  • 10.8.2 Not Compatible with my 2012 Mac Mini?

    I just purchased a Mac Mini to run some hardware in my graphic design studio...I purchased it last week (Nov 2012) and I just got around to implementing it with our equipment.  So I get prompted for an update in the App Store and attempt to update but one of them fails saying I need 10.8.2.  I thought I had the latest...but anyway...I go to update the OSX to 10.8.2 and I get a notification that it is not compatible with my computer?
    Can you someone please tell me why this case?  I would have thought a 1 week old computer would be very compatible with the latest OSX?
    2.3GHz quad-core Intel Core i7
    4GB memory
    1TB hard drive1
    Intel HD Graphics 4000
    OS X Mountain Lion  (10.8.1)

    http://9to5mac.com/2012/11/19/2012-mac-mini-users-are-unable-to-update-to-os-x-1 0-8-2/
    Have you tried download manually and install http://support.apple.com/kb/DL1611

  • HT4848 I have a Recovery issue with late 2012 Mac Mini

    I have a Mac Mini late 2012 purchased last week. I put a Mercury 240GB SSD into the top bay and upped the RAM to 16GB. I then formatted the SSD and used Recovery to install the OS on the SSD. The system performs as expected EXCEPT... when I use the Recovery Disk of either drive I get a message that both the original Drive and the SSD are damaged. If I select either drive it says if I choose Fix it will erase Both drives. Is this because Recovery sees 2 identical OSs on different drives? I had planned on erasing the 1TB 5400 drive that came with the MM but I'm hesitant until I resolve this issue. Any thoughts? Is the Mac Mini operating a "special" OS? I haven't seen this behavior before. Report says it's build OS X 10.8.2 (12C2034).  FWIW mylate 2010 MBA and early 2008 iMac have build OS X 10.8.2 (12C60). Is this a possible Bug as I haven't noticed this type of behavior before? 

    I thought about your dilemma while ASC was down, that's good news your welcome!
    I spent some of the time replacing the 320GB 5400rpm HD in my 2010 Mac Mini with a 500GB Hitachi Travelstar 7200rpm HD. Then moved forward by Restoring Mountain Lion onto it from an External HD, instead of Snow Leopard from the original 5400rpm drive. I really prefer to keep my music and photos on the Internal HD and so I couldn't justify the cost of a larger SSD.
    So basically I flip flopped and now running Mountain Lion on a larger/slightly faster Internal HD and Snow Leopard from a FireWire External HD when needed.

  • External usb microphone not working with FaceTime and mac mini with os x Yosemite

    Hello
    When I try to do a phone call with face time through my iphone 6 face time is not recognizing my external usb microphone connected to my mac mini. I have just updated my mac mini to os x Yosemite. If I go to the audio system preferences and look to the audio input signal I can see that the external microphone (SB Omni Surround 5.1) is working (audio input level is showing an input signal).
    Can someone help. I saw that this was also an issue in the beta versions of Yosemite.
    Thanks.
    BR Stefan

    Interesting.  I don't have a USB mic on the Mac Pro.  Its the OLD FireWire 300 iSight.  It works for FaceTime calls but not the iPhone call via the FaceTime app.
    I also have 2010 MBP that works perfectly, even since the first Public Beta.  I'm to sure if that mic is considered an external USB device or not, or if it has to do with device signatures vs. external or internal.  I would almost assume that the built-in mic is on the USB bus.  How would it be any different than the external USB.
    I think I have to agree that this is a point release bug.  I have submitted a bug report at bugreport.apple.com, and would ask others to do the same, or at least post to apple.com/feedback.  The more noise we make through process the more likely to get a fix in the .1 release.

  • HT204388 LCD tv does not work with trackpad on Mac mini

    My Mac mini is connected to my tv on the Jimi to Jimi and the trackpad and the keyboard of not work right
    A fix for this ?

    Please provide more information.
    First, I have no idea what "Jimi to Jimi" means. This is probably just something you need to explain to me; a Google search didn't turn up anything useful.
    You said that the keyboard and trackpad aren't working right. What does this mean, exactly? Regardless, the monitor you use should have no effect on the function of your other peripherals.

  • My late 2012 mac mini boots slow with new ssd drive

    So here is the situation.  I purchased a 128gb ssd drive, installed it a usb enclosure, formatted it to Mac OS Extended (Journaled), cloned it with carbon copy cloner 3,   used the option key during boot up and selected the ssd drive and it booted my mac mini and it functioned perfectly.  I than tested it for dozens of reboots and it worked fine.  I then took apart my mac mini and removed the original hard drive and installed the new ssd drive.  When I boot to the ssd drive it still takes 47 to 53 seconds just like the old drive.  Aren't ssd drives supposed to be a lot faster?
    My solution or tip is as follows; The reason it takes so long to boot is because the mac mini doesn't know you replaced the old drive and it is looking for it during the boot process.  Finally it can't find the drive so it boots to the ssd drive.  All you have to do to correct this is click on "system preferences", select and click on "startup disk" and select your ssd drive and click on "restart".  After these steps your mac mini will now boot in about 17 seconds.  Issues solved. 

    Yes, my solution fixed the issue.  I went from a 47 to 53 second boot time to a 17 second boot time.  The ssd drive is significantly faster than the original drive that came with my late 2012 mac-mini.   This is my first post and I wasn't sure how to post this as a tip.  I have another tip regarding usb 3.0 hubs. 

  • Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

    Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

    It appears that many of the problems with the HDMI are the "monitors" that are being used. Samsung and Vizeo both DO NOT support a computer input on HDMI only VGA. There probably are others, manuals must be read to confirm compatability.
    I strongly believe that the reason the 10.8.2 update was pulled is due to the fact (it happened to me) that the new Disk Utility creates a Fusion drive if aftermarket SSDs are added to the system. I think Apple wants this propriatary Fusion Drive to be something you buy from them not a "homebrew" for lots less money.

  • I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

    I have a late 2012 mac mini with an i5 2 core can I replace it with an i7 quad core?

    A few places online may still offer the i7 2.3GHz quad-core Late 2012 MINI (Oct 2012 to Oct 2014)
    that allows the user-upgrade of RAM to 16GB, and this one I've seen is a Server model and has
    two 1-TB Hard Disk Drives. The B&H store in NY online has this listed, if in stock now, price &
    shipping in continental US is good until tomorrow.
    Your i5 dual-core is still desirable to many, & you may be able to resell it if not needed.
    Good luck & happy computing!

  • I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

    I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

    you must also use a browser that allows cookies.  try a different browser or download from adobe.com
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Mail application will not work with latest version mac 4.5

    mail application will not work with latest version mac 4.5

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • After rebooting late 2012 Mac Mini a question mark appears on screen

    Hi guys,
    After rebooting my late 2012 Mac mini model No A1347 I have a question mark inside a folder always when i try to start my Mac Mini. I understand that I need to reinstall Mac OS X, but I have tryed holding the command, option, R and P keys and nothing happens... I also think the wireless keyboard is maybe not sincronised with the computer, maybe?
    I am clueless in how to proceed.
    Offcourse, there is no DVD drivein the new mac minis so i can't just reinstall it from a CD.
    Please help!!!
    Thank you!!

    You need to press either the Option key or the Command and R keys. If this doesn't work with the wireless keyboard, use a wired one.
    If you can get it booted to a normal Mac OS X system, select that system in the Startup Disk pane of System Preferences.
    (77816)

  • Late 2012 Mac Mini - Random spinning beachball then crash.

    Hi,
    I have a late 2012 Mac Mini bought last summer. Since the early days I would randomly get the spinning beach ball and there was no bringing it back. A re-boot would be required. I upgraded to Yosemite and the issue still occurs. I could literally being doing any everyday activity. Browsing the web. Scroll through a quicktime video and it just happens. Now it will crash and I get a grey screen with a folder and blinking question mark. Now I know what that means but then when I reboot the Mac Mini it starts up again. Hardware test finds no faults. I was going to try a clean install but just wanted to get some opinions if possible. Thanks in advance.
    EtreCheck version: 2.0.11 (98)
    Report generated 23 November 2014 18:44:43 GMT
    Hardware Information: ℹ️
      Mac mini (Late 2012) (Verified)
      Mac mini - model: Macmini6,1
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      DELL P2014H 1600 x 900 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:52:1
    Disk Information: ℹ️
      APPLE HDD ST500LM012 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (390.02 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple, Inc. Keyboard Hub
      Logitech USB Receiver
      Apple Inc. Apple Keyboard
      Apple, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] org.virtualbox.kext.VBoxDrv (4.1.6) Support
      [not loaded] org.virtualbox.kext.VBoxNetAdp (4.1.6) Support
      [not loaded] org.virtualbox.kext.VBoxNetFlt (4.1.6) Support
      [loaded] org.virtualbox.kext.VBoxUSB (4.1.6) Support
      /System/Library/Extensions
      [loaded] com.Logitech.Control Center.HID Driver (3.7.0 - SDK 10.6) Support
      [loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) Support
      [not loaded] com.increw.kext.speedit (0.32) Support
      [not loaded] com.leapfrog.codeless.kext (2) Support
      [not loaded] com.leapfrog.driver.LfConnectDriver (1.10.5 - SDK 10.8) Support
    Launch Agents: ℹ️
      [invalid?] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.Logitech.Control Center.Daemon.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.leapfrog.connect.authdaemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.stclairsoft.AppTamerAgent.plist Support
    User Launch Agents: ℹ️
      [running] com.leapfrog.connect.monitor.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Internet Plug-ins: ℹ️
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      OfficeLiveBrowserPlugin: Version: 12.2.7 Support
      RealPlayer Plugin: Version: Unknown
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      iPhotoPhotocast: Version: 6.0
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      EPPEX Plugin: Version: 4.1.0.0 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    Safari Extensions: ℹ️
      Slick Savings
      Searchme
      Amazon Shopping Assistant
      Ebay Shopping Assistant
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Logitech Control Center  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          19% mds
          5% WindowServer
          0% com.apple.WebKit.WebContent
          0% fontd
          0% AppleSpell
    Top Processes by Memory: ℹ️
      241 MB com.apple.WebKit.WebContent
      107 MB mds_stores
      73 MB Safari
      64 MB Finder
      56 MB WindowServer
    Virtual Memory Information: ℹ️
      704 MB Free RAM
      1.78 GB Active RAM
      1.10 GB Inactive RAM
      717 MB Wired RAM
      1.74 GB Page-ins
      0 B Page-outs
    This is also the begging of the crash report the system provide after reboot. If this helps.
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff80221c4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
    Backtrace (CPU 0), Frame : Return Address
    0xffffff802962be50 : 0xffffff8021d3a811
    0xffffff802962bed0 : 0xffffff80221c4594
    0xffffff802962bf40 : 0xffffff80221c425c
    0xffffff802962bf50 : 0xffffff802224dcb2
    0xffffff802962bfb0 : 0xffffff8021e3ac46
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    14B25

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • [SOS][Urgent]Can I install OS Lion 10.7.x on late 2012 mac mini?

    Hi all,
    I got a late 2012 mac mini device which comes with preinstalled Mt Lion(10.8.2).
    I need to run dual boot it with Lion 10.7.x. How can I install OS Lion 10.7.x on this device on different partition?
    I've tried many ways but have not managed to do it(Create Lion USB bootable use my friend Lion OS dmg file).
    Please help me.
    TriQuang

    In general, Macs cannot boot an operating system older than the one they were shipped with installed.  There are some exceptions with those computers that shipped at the time of transition to a new operating system and still had the firmware that permited the immediately previous operating system.  Once the firmware has been updated they can no longer boot the previous operating system.
    Depending on the exact manufacture/release date of your computer it may have been possible to boot both Lion and Mountain Lion, but your use of a USB and attempt to boot showed that was not possible.
    There is a technique some users say works in this case...and that is to install software such as Parallels 8 on an external drive partition, then install Lion on that partition and run it in a virtual machine environment.  This gets very complicated but can be done.
    Another alternative you might want to consider is looking at the Apple on-line store, lower left side of that window, and see what refurbished equipement is available that runs Lion.  Those computers have been completely gone over by Apple, new batteries for the portable models, new caes, any faults repaired, and come with new computer one-year warranties.  They are indistinguishable from a new computer.  And if there is one that meets your needs you would have your current machine running ML and another running Lion.

Maybe you are looking for