FIOS remote can turn TV off but not on? (Westinghouse LCD TV)
Westinghouse model CW26S3CW 26" LCD HDTV. Weirdest thing happening and that is I am able to get the FIOS remote to do everything but turn the TV on. I have contacted Westinghouse and they are saying to use the Sanyo or Samsung codes but they don't work. I have different types of FIOS remotes and have tried them all to no avail. I'm just dumbfounded how a FIOS remote can turn the TV off but not on.... Westinghouse must have some real whacked out technology that on and off are done differently. Anybody have a solution to this problem?
I'm having this problem, started about a week ago. I tried a factory reset and it did not help. I have model 46G300U1. Unplugging the TV is the only way that I know it will stay off.
TV will randomly turn itself back on. It does not always happen after a few seconds. For example, last night I turned off the TV and sat in the same room for a few minutes and it did not turn back on. However, when I checked this morning, it was back on.
I'm running the latest firmware.
Similar Messages
-
Please help my daughters iPod is stuck on iOS 6 it will turn off but when it's turned on again it just comes up ios6 , like a home page ... Please help
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I was on Itune match last year and I do not want to renew this year.
I turned it off, but I can't see my music files anymore...
How do I get all my music back to my computer?What about if I want the entire playlist available so that I can view it in my finder the way I was able to before I made it a playlist?
-
My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.
By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position! -
My ipod touch is on but is not bright enough i try to turn it off but it wont work what should i do?
my ipod touch is on but is not bright enough i try to turn it off but it wont work what should i do?
Did you make sure that the brightness is turned up to max in Settings/Brightness?
Is anything covering the brightness sensor?
Brightness
Screen brightness affects battery life. Dim the screen to extend the time before you need to recharge iPod touch, or use Auto-Brightness.
Adjust the screen brightness: Go to Settings > Brightness and drag the slider.
Set whether iPod touch adjusts screen brightness automatically
Go to Settings > Brightness and turn Auto-Brightness on or off. If Auto-Brightness is on, iPod touch adjusts the screen brightness for current light conditions using the built-in ambient light sensor.
page 103, ipod touch user guide 5
See if you can fix it by resetting the device.
To reset, hold the sleep and home button until the Apple logo comes back again.
If this does not work, set it up as new device:
How to back up your data and set up as a new device
Message was edited by: Ingo2711 -
It's not letting me use iMessage and I turned it off but it won't let me turn it back on. What do I do?
http://support.apple.com/kb/ts4268
-
Some how're face of my iPhone has gotten really large, I can't access anything. Tried turning it off but I can't access enough of the slide bar to turn it off
On the Home screen, double-tap with three fingers to exit zoom.
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129 -
my ipad 4 connects to LTE when I am at home, even though I have wifi. LTE is faster so it connects first, which costs me money. I know I can turn LTE off on settings but then when I turn it back on when I go out I forget to turn it back off at home.
My iPad will show a cellular connection even though it is using Wi-Fi as long as I have cellular turned on. Are you sure that your iPad is actually using the cellular instead of Wi-Fi?
-
How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]
How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]?
Go to Settings>General>Auto Lock - tap the arrow and then choose your time setting to put the iPad to sleep.
-
i have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop and i want to update my iphone4 to iOS 5.
Things in this thread might be helpful too.
https://discussions.apple.com/thread/3382814?start=0&tstart=0 -
The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either, so I can't even turn it off since you need to "slide to power off." HELP! I'm leaving on Thursday morning for six and a half weeks, and I absolutely need my iPod with me. I was just at the Apple store today for problems I was having with ANOTHER product, and I don't really want to drive all the way out to where my nearest store is (which is not very near) if I can figure this out at home. My iPod was working totally fine earlier today and last night, so I don't know what happened! Please, please, PLEASE HELP!
Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.
-
Disk Utility can see my drive but not mount/repair a volume on that drive.
Situation:
During a permissions repair on an external drive, the power went out.
Since then, it won't mount. It spins up, lights on etc, and the drive itself shows up in Disk Utility.
The volume is greyed out.
When I select the greyed out volume and select INFO, I get:
OWNERS ENABLED: NO
CAN TURN OWNERS OFF: YES
I would think it was a permissions issue since the power went off during repair, and I'm hoping to force-repair permissions.
Tried Disk Warrior (v 4.4)... it mounted but I got this message (despite hardware being fine):
The directory cannot be rebuilt due to disk hardware failure (-36, 2747)
It's not a hardware issue; the drive is fine, it just won't mount.
What I've done:
Unplugged/replugged drive
Swapped out cables from a similar drive
Attempted Disk Utility on two laptops with same results
Booted from startup disk, ran DU, same results
Ran Disk Warrior
The only way to get the drive to show up in Disk Utility is to open DU, then plug in USB. It shows up every time, but once I attempt something, I have to pull/replug USB.
I cannot make a disk image in Disk Utility.
I have another completely empty 3TB drive that I could back everything up to.
Specs:
External drive, 3TB Western Digital, USB, HFS, no partitions.
Lion, 10.7.3
Mac Pro, 6GB memory, Intel processor
Drive name "WD My Book 1130 Media", Volume "Big Boy"
Suggestions?
Any force-repair terminal stuff?
Any software I'm not trying?
Any tricks?
Let me know if I'm missing some helpful info; I've done screenshots of every message screen; two are included below.
Thanks for any help!Try this:
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select the desired hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. -
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.
Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
I bought a song off of the itunes store on my iphone but it wont play. I even tried to repurchase it but it says that I already purchased it. I have restarted my phone and turned it off but it still won't download or play. HELP!
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your phone and re-download it via the Purchased tab in the iTunes store app on it, or the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking some people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page. -
ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?
Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
If not successful, then time for an appointment at the Genius Bar of an Apple store.
Maybe you are looking for
-
Hi When you execute the following code , you will see a table , drag or extend the column size of column D such that , you get a horizontal scroll pane Now when you click on first,second or third column ( i.e row selection ) no problem but if u selec
-
Hello I have a MBP 13 inch model 2010. I want to know if a install windows, if i can play GTA IV without problems, or is he going to shock, or block?? I have another question: i see you can plug in from mini display port to HDMI. I have a 42 inch pan
-
Recently I blogged on a particular problem we encountered with flows_files.wwv_flow_file_objects$ (see http://iadvise.blogspot.com/2007/01/apex-flowsfiles.html) Bottom line, the problem was that the tablespace of that table could not create extra ext
-
Why cant I find an add-on to open a new tab in my home page on Firefox 5?
I have been able to open a new tab in my home page (Google in my case) in all of the other versions of Firefox. I am a loyal user but this is frustrating. I cannot locate an add-on for this feature. Is there something out there?
-
HP Photosmart 7960 driver (.inf) file name
What is the Windows XP HP Photosmart 7960 driver (.inf) file name?