Fios router to airport not working.

I have the Fios Actiontec connected to my airport router (via a long ethernet cable) in another room to extend my wi-fi signal. It's worked fine for the past couple of years. I had to reset the Fios router after some technical difficulty. The Fios router works but I can't get the airport router to connect. The light on the airport is green. When I try to access the internet via my bluray player (for netflix)....I get the following (wireless connection ok - internet connection failed).
So the bottom line is, the Airport Extreme light is green but not connected to the internet.
Thanks.

I've been trouble shooting. Airport recoginzes the signal from the Fios router....but it is not sending out a signal via Wi-Fi. I can plug in an ethernet cable into Airport and surf the web. Is there something in the settings that I am overlooking?

Similar Messages

Verizon FIOS router Actiontec MI424WR not working with bonjour printing

Running OS X ver 10.9.3. Have a HPLaserJetP1102w. Just upgraded my Verizon FIOS router to Actiontec MI424WR Rev. I. Now my Mac can no longer find the printer wirelessly (it does, however, work thru USB). I see others have had this problem- and apparently some have solved it by changing settings on the router- but those settings options do not appear under 'advanced' for me. Verizon technical support, including the version one must pay for- was totally and utterly unable to help. Any suggestions for how to rescue this? Was all working perfectly with older Verizon router.

>It's amazing to me that talkting to 4 or 5 Verizon Tech's, they all say "This is new to me, I've never heard of this." Ugh...
I've had EXACTLY the same experience. Phone support and the techs who come to my home apparently have no idea this has been happening for months and months. Clearly, this issue hasn't filtered down from the network engineers to support.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

RV215W router port forwarding not working

RV215W router port forwarding not working.
Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.
I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
Dave Gritten
IT Director
Maritime Beauty
3695 Barrington St
Halifax NS B3K 2Y3
cell 902.223.9685
phone 902.429.8510 ext231
fax 902.422.7983
[email protected]
www.MaritimeBeauty.com

It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.

Verizon Fios and Airport not working. PLEASE HELP!

Ok, so I have been trying to get my Airport Extreme and Express to work with my new verizon fios service for about 5hours now. incrediably frustrating becasue with my old service provider it took about 5min.
Here is what i need to do.
extend the fios network using my airport extreme. I need to wirelessly print and use it in my office which is far away from the Verizon MI24WR router. cords are not an option. I need this to be wireless.
I also need to extend my network downstairs to my airport express in order to use itunes to wirelessly listen to music on my speakers.
I have tried other things described in message boards but I need both the extreme and express to be wirelessly connected to the verizon router. Is this possible and if so how! Please explain in the simplest of terms.
I am beyond frustrated! PLEASE HELP!

do you have printer driver v6.12, if not here's the link
http://www.epson.com/cgi-bin/Store/support/SupportLeopardDetails.jsp?BV_UseBVCoo kie=yes&oid=54861#stage1
did you contact epson? try them too..

Since MacOS 10.6.8 update, AirPort not working

I updated my MacBookPro with MacOS 10.6.8 and since then my wifi connection stopped working. For some reason, AirPort has disappeared. I did the following suggestions:
Restart the MacBook Pro
Deleted Mac System preference files
Ran Disk Utility
AirPort Utility cannot make a connection.
I attempted to rebuilid the connection via the System Prferences/Network, but AirPort does not appear on the Interface list to create a new service.
When the MacPro is connected directly to Internet via the Ethernet port, it works fine. We use LinkSys for the router. We have another older MacBookPro that was also updated and it is not having AirPort issues. I already consulted the AirPort troubleshooting guide on the apple site.
Any other suggestions?
Amy

Mine did the same thing on a later model MBP - I deleted my pref file restarted and it did not work - I plugged in an ethernet while it was running and then did one more reset at random and it came back on. very random.

Airport not working after Apple sw updates - HELP PLEASE!!!

I have a newish MAC Intel. The Airport was working fine for the last 9 months or so until I puled down Apples usual sw updates. I did them all incl the firmware update. Now the Airport wont hook up. I have wireless to NETGEAR router downstairs. I see network broadcasting as its sen in networks box, yet when I select it and then plug in a WEP and connect it says no can do and jumps back to no network selected. Ive tried this dzens and dozens of times. Lke I said was fine for last 9 months until updates last week...grrrhh.can anyon help me please?
thanks
./david
PS ot sure what OS I have..never checked to be honest
INTEL iMAC Mac OS X (10.4.8)

Hi David,
sunny in Scotland right now ?? (Sorry, just joking)
Have the same one and came to the conclusion that Airport doesn't wait for the DHCP from the Netgear to get a numer like 192.168.xxx.xxx but has already one which is not in the pool provided by the Netgear.
Since I'm depending on this I help myself by turning Airport off (in the Menu) wait 20 seconds and then turn it on again.
Helps every time.
Another guy round here has helped himself by turning off the Automatic (in the Airport preferences) and has entered all numbers manually.
Regards
Stefan

Airport not working after having inverter board replaced

My MacBook's AirPort is not working. I took it to an Apple store to get the inverter board replaced to stop my screen from flickering and now my AirPort doesn't work. I can turn it on, but I can't see a wireless network. There are other computers on the network, so it's not a problem with the network. I'm just wondering if there is anything I can do to try to solve this problem without having to take my Mac back to the store and go without it for another day or two.

Normally that is on my list of to-dos when something network related isn't working. Unfortunately, I am not at my house, I am camping, and where we are staying provides wifi, so I can't really reset the router. Hopefully the router gets reset sometime tonight.
Usually I can see networks, but I can't see any right now.
Message was edited by: skidogallard

Moved G5 to new location, airport not working

I just moved my G5 downstairs to the same exact place where I typically use my laptop (powerbook G4). Never had an issue with the laptop recognizing airport and going online, but now my G5 won't show any networks at all and I can't get airport to work.
Is there something I should be changing in the settings or how can I get airport to work on my G5 in the new location?
Thanks much!

Hello BDAqua
No problem, I do quite a bit of experimenting with my Macs and find out some weird things, but some are working to my advantage, I always operate my Power Mac G5 without the side panel now, but of course keep the air deflector in place, unless theres company coming over, then I replace the side access panel. Also, there is an antenna inside the G5. It runs along the opposite side of the G5 case behind the logic board to the rear of the case, where the external antenna is connected. So by removing the side access panel, it allows for moderate reception. =) As mentioned earlier though, definitely not as good as the external antenna, but when used without the access panel in combination with the external antenna, it get better reception than my 1.25GHz iMac G4 did. And by the way, this also is true for Bluetooth as well, as I have a Bluetooth Board installed in my G5. =) I loaded my G5 once I bought it (Used).
Regards again. =)

Airport not working on my mac mini with snow leopard

hello my airport on my mac mini 80 gb with snow leopard 10.5 is not working so i can not connect to the internet,i had a problem and re-installed snow leopard but i cannot to the internet now,i go to system preferences and network and i have tried to setup manually but to no avail,i click on airport in utilities and do a scan but it shows nothing,any ideas please?
thank you.

i have tried every thing and still cannot get on the internet,i think it is because i keep booting into safe mode,i had put in a sudo command to boot to safe mode and then i re-installed snow leopard but it still boots into safe mode,i just tried the sudo command sudo nvram boot -args = " "
but i got the error nvram:error (-1) getting variable - 'boot'
any ideas please?
thank you.

Router Port Forwarding not working since Mavericks

I have an iMac sat behind a BT Home Hub 3 (an ADSL router, if you're not aware), with several ports (POP3, SSH, HTTP, etc) from the outside world forwarded via the hub to my Mac. Since installing Mavericks (from Snow Leopard), NONE of these ports are now open.
They're open on the Mac, and another machine on my home network can use them locally, but from outside the network, they're hidden. Shields Up shows them as Stealth.
Things I've tried:
Rebooting everything.
Setting the Home Hub up again, forwarding all the ports again.
Turning all the sharing off in Mavericks and then back on.
Trying the same services on different ports.
Trying different services.
Turning off the Mac firewall.
Turning off the router firewall.
Trying the Mac on another IP address and reforwarding everything to the new one.
Putting the Mac in the DMZ.
I can forward ports to other devices on my network (e.g. my NAS) and they work fine, so port forwarding isn't completely broken on the router
Here's the thing though...
On a completely separate network, on a separate Mac (a 2012 MacBook Pro) that went from Mountain Lion to Mavericks, also behind a BT Home Hub 3, EXACTLY the same thing is happening. No ports can be forwarded to the MacBook Pro, but all the ports are open to the local network.
Any ideas? I'm pretty sure this must be a bug in Mavericks as I can't see anything else it can be.

It's not just single port forwarding that has bugs, the entire router has bugs and simply does not work as advertised. I have found the following bugs/aspects of this router that just does not work correctly: 1. If you have to open ports, and who doesn’t, this router will eventually stop accepting packets from WAN>LAN. You will still have Internet access but no open ports. A reboot will fix this problem. Oh, by the way, this router has no scheduled reboot option! <--That would be a workaround but a welcome one for this router. 2. Firewall Access rules do not work!! Yep, a Cisco router and basic functionality simply does not work. I called Cisco and even though the tech saw the router not working denied it was a bug! Said we have to do port mirroring, setup a workstation with WireShark and capture packets so we can debug the issues. That would take several hours. I told him I would have appreciated if Cisco would have debugged the issues with their router BEFORE they shipped the units. Stay away from Cisco Small Business Routers. I wish I had. And if there are any Cisco die-hards out there willing to prove me wrong, just reply to this and please, prove me wrong that the RV series and specifically the RV215W is not JUNK.

827H router web setup not working

We were having problems with our 827H router, so I decided to reset it to the factory defaults and re-run the quick setup. I've done that before with no problems.
This time, after it loads the configuration in the web setup, it keeps checking the model, IOS version, etc.--over and over again. It won't stop, nor can we exit out of it to get to the quick setup.
Originally the router was connected to a hub. When we couldn't configure it from the web setup, we put the router directly onto a pc with an ethernet cable. We could ping the router. Using the console cable, we are able to see the router's settings. (See attached)
The pc was set to dhcp. The dns was originally set to "Obtain automatically". We also tried to set the dns and the gateway to the router's ip, and added the domain controller's dns as another dns server. Nothing has worked.
Any help will be greatly appreciated.
Thanks!

Your description of the symptoms is quite puzzling as is the console log that you sent. You say that you connected a PC directly to the router. Was that using a cross over Ethernet cable?
You say that when you connected the PC to the router you could ping the router. What IP address was on the PC at that point.
The console output that you included has a kind of garbled output in the show run. It looks as if two things were outputting at the same time. I am not clear if there were actually two things happening together or if the router is really messed up. (Though most of the config that showed up looked reasonable)
I would suggest that you connect to the console port again and capture all of the console output. I would suggest that whle you are connected and capturing output that you power cycle the router (it may be very helpful to see what messages go to the console while the router is booting).
After the router boots again, you may be able to use the web interface. If the web interface does not work you should be able to use the console interface to get a congif that should work basically.
Try these steps and post the output. Maybe then we can find a solution.
HTH
Rick

Had to reset router, pass did not work, how to make secure again?

Password would not work, had to reset to factor. How do I make a new password and secure it again?
WRT5462

Wireless Configuration: Manual Wi-Fi Protected Setup -------------------------------------------------------------------------------- This is where I am. I don't see anything that says create new user name.. help Wi-Fi Protected Setup TM Use one of the following for each Wi-Fi Protected Setup supported device: 1. If your client device has a Wi-Fi Protected Setup button, click or press that button, and then click the button on the right. OR 2. If your client device has a Wi-Fi Protected Setup PIN number,enter that number here and then click OR 3. If your client asks for the Router's PIN number,enter this number 51164188 in your client device. -------------------------------------------------------------------------------- Wi-Fi Protected Setup Status: Unconfigured Network Name (SSID): linksys Security: Disabled

Airport not working after osx update-keychain?

Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
"Confirm Application Change
Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
This chain is permanent and affects all keychain items used by aiport.
Don't Change Change All
What should I have replied? Anyway to reset the airport or download it again?
Thanks.
Anyway to reset this or download again? Thanks.

What should I have replied?
Change All

Router web page not working

My dad has a WRT54GS that we can't get the WEP key set. We can get onto the router site but when I click on the wireless tab it goes to an empty page. I thought it may be popups so I turned all that stuff off but it didn't work. Can anybody help me? Thanks

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Fios router to airport not working.

Similar Messages

Maybe you are looking for