FIOS Television Cisco CHS 435HDC: Ethernet input Enabled?

I notice in the user manual for the Cisco 435HDC it illustrates using both a coax and ethernet input. The coax obviously works; I was wondering if the ethernet input can be used off a network?

DB22222 wrote:
I notice in the user manual for the Cisco 435HDC it illustrates using both a coax and ethernet input. The coax obviously works; I was wondering if the ethernet input can be used off a network?
No.

Similar Messages

IR Extender for Cisco CHS 435HDC

Just had FIOS installed today and I'd like my Cisco CHS 435HDC DVR to be behind closed doors. The installer stated that I could get an "IR Extender" to accomplish the task. In the accessories area of Verizon I see a Motorola IR Extender Cable for Motorola QIP-7000 STB series; the only device listed. Will that work with the CISCO box?

People have said this works well on both Moto and Cisco, so perhaps the one on the Verizon page would do the same. I believe the one on the Verizon site has a 3ft cable or something. I don't recall. I have noted that it is said to disable the one one the front panel. This one is out of stock until Mid. Feb. You may just want to google it.
http://www.amazon.com/gp/product/B002JSDHCY?tag=5336055023-20

No variable audio output for Cisco CHS 435HDC set top box.

Background: Until the other day I had my stb connectected to a TV, using TV sound, with an HDMI cable. The P265v2 remote volume control changed the TV volume. No problems.
My new TV & home theater system was recently installed. We don't use the TV speakers. While my first preference was to program the Verizon remote to change the volume on my Onkyo receiver, this did not appear to be an option on the remote's programming instruction page on the Verizon website. Instead, I am directed to change a setting on the remote that makes the Verizon remote change the stb output volume vs the tv volume. I changed the setting on the remote and ensured the stb box was set up for "variabe" audio output.
Problem: Using the stb variable audio settings, volume settings 1 through 30 produce the same volume. (Volume setting 0 produces no volume, as one would hope.) It appears the "variable" setting isn't producing a variable output as it should be on this unit.
Thinking that maybe the receiver was complicating the sitation, I tried connecting the stb to the old TV and the new TV directly and had the same results.
Now, while I am watching TV, I need to have the receiver remote at hand in addition to the Verizon remote. It would be nice to have the volume be adjustable as it should be while using the Verizon remote. I don't like the idea of using a seperate universal remote because then I would lose some of the functionality that the Verizon remote provides when watching TV, using the DVR, watching on demand, etc.
I would like to know if this is a problem just with my unit, or if it exists with all of these units, which would hopefully be fixed with a Cisco/Verizon firmware update soon, hopefully.
Thank you.

soups230 wrote:
Having same issues with hdmi and optical. Any fix to this.
Hello,
In order to control the volume on your home theater system, you'll need a FiOS TV Universal Remote that has the 4-buttons on the top for 'DVD', 'Aux'iliary, 'TV' and 'STB'. The audio receiver would have to be programmed into the FIOS TV Remote, and controlled using the 'Aux'iliary button.
Verizon's 4-Button Universal Remote Controls are available for purchase:
a) online via www.verizon.com/fiosaccessories
OR
b) at a local FiOS TV store (call first to check if they have them in stock). For a list of stores: http://www22.verizon.com/support/residential/tv/fiostv/general+support/account+issues/questionsone/8...
Presently, the default remotes for new set top boxes are the 2-button P-265 (newer version) remotes.
Regarding a problem with HDMI/optical on Cisco 435 STBs, check out the following:
Go to this webpage: http://www22.verizon.com/Support/Residential/TV/FiOSTV/Receivers/Equipment+Issues/QuestionsOne/12839...
Click on the link for 'Cisco CHS 435 HD DVR User Guide'.
Open the PDF and go to page 22 for 'Connecting to a Home Theater System...'.
Hope this helps!

CISCO CHS DVR dropping sound to LCD TV

I have a CISCO CHS 435HDC DVR hooked up to a 32" Emerson LCD TV. Periodically the sound will stop coming out of the set...and we have to turn the TV off then On. The installer mentioned something about "HDMI" synching problems with the receivers and that unplugging/replugging the HDMI cable would fix it. (That does work but we found that turning the TV off/on forces the "resych" and the volume returns.
Is there a DVR SW patch for this intermittant sound loss.?

The boxes all have the latest software. You will want to check with your TV manufacturer. Most newer TV's come with updatable firmwares to fix problems such as these. Since every TV is different in this procedure you would need to contact their helpdesk.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Slingbox with new FiOS DVR (CHS 435HDC)

I just had FiOS installed with the CHS 435HDC DVR box. The Slingbox website says it's not a supported set-top box. Is there anything I can do? Or will I have to cancel FiOS in a matter of hours after it being installed?
Please help,
Mike

Set up the slingbox as if you are connecting it to a Motorola QIP-6416 DVR.
Insert signature here.

How to get the value entered in input enabled field of a list output?

Hi all,
I am developing a program to display list with two input enabled fields . After users enetered the values into these fields I need to do some calculations based on these values and modify the value of another field in the list.
But i couldn't have an idea how to read the values after users enter into these fields.
Please help me on solving this problem? If possible please provide the sample code.
Thanks,
Aravind.

You can enable disable screen fields in at selection screen output event.
And by using loop at screen.
And for changing the values you can do in initialization event.
I Hope you are doing these in Reports.

Object variable not set (Error 91) in Input Enabled query

Hello,
I'm having the following issue. I have created an input enabled query and included it in a planning workbook. Every time I open the workbook or query, and I got to an input enabled cell, I get the error below:
Object variable not set (Error 91)
This client has not used planning workbooks before. The system is on 7.10 SP10 for Bex Analyzer and SAP Gui 7.10 Patch Level 13.
I'm not finding any relevant so far in SDN. Any help anyone can provide is greatly appreciated.
Thanks,
Senthil

Hello,
Just wanted to let you all know that this issue has been resolved after updating my SAP Gui to 7.2 Patch Level 4 (Patch Level 5 was causing some other issues so I decided to stay at Level 4).
Thanks,
Senthil

Table Control - Input Enabling/Diabling of Rows based on Condition.

Hi,
In the TC, I want to Input Enable/Disable the rows based on Conditions. The First row is input enabled always. But the other rows, (2nd onwards) need to be Input Enabled/Disabled based on some conditions. It is possible to make this working. Can you please provide me a suitable solution for this?
Appreciate Your Help.
Thanks,
Kannan

Hi Kannan...
If we are talking about "Rows"...
then identify based on some conditions the row numbers and in PBO...loop at screen with screen name..set thier input properties and modify screen (make them input only)
If we are taking into consideration "columns"
There is an internal structure COLS where we can identify column number of screen name ...or we can take except for one particular column..
if some condition satisfied....
loop at screen where screen-name <> "Column which is input'.
Loop at screen...and make other columns display only.
modify screen
endif.
Regards
Byju

Custom field in Bid Quote not editable/input enabled/changable

Hai All,
    In the SRM Surrogate Bidding process , PO is generated from the Quotation which corresponds to the bid which has been accepted. Now before generating the PO we need to pass the Ordering vendor address information from the Quotation back to the PO. We added a custom field to the Quotation following Note 672960 - User-defined fields 2 and it is being added to the BASIC DATA TAB in the Header data of the Quotation, but we are not able to enter any values since it is in display mode.
   We then referred Note 809630 - Customer field in bid invitation and bid - How does it work? ( after referring Notes 458591 and 672960), and found that we need to implement the methods MODIFY_SCREEN and MODIFY_MODE_QUOT of the BADI BBP_CUF_BADI_2.
         The MODIFY_SCREEN method works fine, but the MODIFY_MODE_QUOT is not getting called during the Bidding process. MODIFY_MODE_QUOT is already existing in the system as per the Note 822424 - CUF. Customer fields cannot be changed in the bid . Also Function-Pool SAPLBBP_PDH_CUF does not have any calls to the method MODIFY_MODE_QUOT but it has calls for the other 3 methods present in that BADI.
       We would like to know (1) How we can make this MODIFY_MODE_QUOT work? (2) And if it is working, Will MODIFY_MODE_QUOT along with MODIFY_SCREEN make the field in the Quotation Input enabled, and/or (3) Is there any other way by which we could make the field Input enabled, for the Users to enter some values, before they Click the Generate PO button.
Please help.
Thanks,
Ghanesh

Hi Ghanesh and SRM experts,
I went through your link mentioned below and I have the EXACT same issue. I am using SRM 5.5 and I have added a custom field to the quotation item level. I am unable to make this field editable no matter what I do .
1) I have gone through all notes mentioned in your scrap and I have implemented them all .
2) I have added the custom field to INCL_EEW_PD_ITEM_CSF_QUOT and INCL_EEW_PD_ITEM_CSF.
3) I have also implemented BADI BBP_CUF_BADI_2 and I confirm that the method MODIFY_MODE_QUOT is never getting called. MODIFY_SCREEN is getting called , and the value of the flag ET_FIELDS-XINPUT is always 'X'. Still the quotation field is display only.
Your post is dated a few months back. If you have solved this problem could you please let me know how.
Help from anyone who anything about the above will be appreciated.
Thank You .
Regards,
Ajali Sen

How to create an input enabled query with Integrated Planning

Hello experts. I have created an aggregation level in IP and I am trying to create an input enabled query based on this aggregation level. My problem is in the properties. On the query properties planning tab the Start query in change mode is grayed out and I am unable to select it. Also on all the chararteristic properties on the planning tab, the planning settings are all grayed out as well and the No budgeting is selected. There is a red exclamation here that says 'function not supported by server' Any ideas? Points will be awarded.
Peter

hi,
go through this help for the procedure...
[http://help.sap.com/saphelp_nw04s/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm]
hope it helps...

Input enabled cell to enter text

Hi All,
I need to create a query which has an input enabled column where user can enter text up to 250 characters. Is this possible only using aggregation level? Is it possible to declare a characteristic to show up as a column and input enabled? I am thinking only key figures can be input enabled and they can accept only numbers but not characters.
I am new to BI Planning concept. Please let me know the best solution for my requirement.
Thanks in Advance!
Sonali.

Hi,
Please take a look in the following thread.
Re: Input Ready query text field
Hope this helps.

How to Create an Input Enabled Query

Thanks in advance for your help, and sorry for the seemingly simple question, but I am new to integrated planning.
I am trying to provide a simple method for the end users to update planning data in a cube. From what I read I should be able to do this with a real time cube and an input enabled query.
I have created the real time cube with my desired characteristics and key figures. I have loaded base data to it and change it to be input ready.
Now I need to create my input ready query. I cannot seem to figure out how to do this. From BEx Analyzer the options for enabling input and change mode at query start are greyed out.
Can someone enlighten me on what I am missing or suggest some reading on how to do this?
Regards
KB

OK, I got over this hurdle. Turning a KF on for input enable the selection to have the query open in change mode. However, when I do this and run the query in WeBEx the query line style changes to all blue and does not allow input.
I have all my Characteristics from the cube included in the aggregation and have included them all in the query as well (in the same order).
Any thoughts?

Input enabled column to enter text in query

Hi All,
I need to create a query which has an input enabled column where user can enter text up to 250 characters. Is this possible only using aggregation level? Is it possible to declare a characteristic to show up as a column and input enabled? I am thinking only key figures can be input enabled and they can accept only numbers but not characters.
I am new to BI Planning concept. Please let me know the best solution for my requirement.
Thanks in Advance!
Sonali.

Hi,
Please take a look in the following thread.
Re: Input Ready query text field
Hope this helps.

ALV - Input enabling cells based on data in other cell

Hi,
I have a requirement,
- Where in there are 4 columns to be displayed in an ALV say <Material No>, <Bin>, <Quantity> (Input enabled) and <Bin Empty> (Conditional Input enabled and it is a Checkbox).
- Now I will be fetching all the Materials available in a particular Bin and display in the ALV.
- Now the User starts entering the Quantity in the <Quantity> column and my program should enable the cells in the <Bin Empty> column for the rows where ever the user has entered Quantity as '0', so that the user can check the Checkbox in the <Bin Empty> column.
Please let me know as to how this enabling/disabling of a cell alone can be done, coz as I know we can make a whole column Input enabled/disabled. Please help.
Thanks in advance.
Saleem A. Chikodi.

Hi saleem,
1.you need to add one extra field in the internal table.
   HANDLE_STYLE TYPE LVC_T_STYL
2. before calling the metho set_table_display...
write your own conditions , in my case i am checking for flag is 'X' or not..
LOOP AT IT_FINAL INTO LS_OUTTAB WHERE FLAG = 'X'.
    V_INDEX = SY-TABIX.
    LS_EDIT-FIELDNAME = 'FIELD1'.
    LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
    LS_EDIT-STYLE2 = SPACE.
    LS_EDIT-STYLE3 = SPACE.
    LS_EDIT-STYLE4 = SPACE.
    LS_EDIT-MAXLEN = 8.
    INSERT LS_EDIT INTO TABLE LT_EDIT.
    LS_EDIT-FIELDNAME = 'FIELD2'.
    LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
    LS_EDIT-STYLE2 = SPACE.
    LS_EDIT-STYLE3 = SPACE.
    LS_EDIT-STYLE4 = SPACE.
    LS_EDIT-MAXLEN = 8.
    INSERT LS_EDIT INTO TABLE LT_EDIT.
    LS_EDIT-FIELDNAME = 'FIELD5'.
    LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
    LS_EDIT-STYLE2 = SPACE.
    LS_EDIT-STYLE3 = SPACE.
    LS_EDIT-STYLE4 = SPACE.
    LS_EDIT-MAXLEN = 8.
    INSERT LS_EDIT INTO TABLE LT_EDIT.
    INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
    MODIFY IT_FINAL INDEX V_INDEX FROM LS_OUTTAB TRANSPORTING
                                      HANDLE_STYLE.
ENDLOOP.
3. psss the style name to layout
GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
these are the steps...
thats all..
Vijay

Making a field on screen input enabled or disabled

Dear Friends,
Please suggest how can I make a field on my dialog-program screen input enabled or disabled through coding. I understand that the same can be done by setting screen parameters but i wish to do that through programming only.
Regards,
Alok.

Hi Alok,
A field can Enabled or Disabled by setting its attributes.
As it is a element placed on screen and modify the screen you need to modify the screen table.
loop at screen.
screen-group1 = 'SC1'.
Enable:
if screen-name = 'PA_MATNR':
screen-input = '1'.
screen-output = '0'.
modify screen.
endif.
DISABLE:
if screen-name = 'PA_MATNR':
screen-input = '0'.
screen-output = '1'.
modify screen.
endif.
endloop.
Some more Info :
1 --- Active
1 --- Input
1 --- Output
0 --- Invisible
Screen field is displayed, even if Invisible is set statically.
Field contents are displayed.
Ready for input, even if Input is not set statically. However, not ready for input if the Output only is set statically.
1
1
0
0
Screen field is displayed, even if Invisible is set statically, except when Output only is set statically.
Field contents are not displayed.
Ready for input, even if Input is not set statically.
1
0
1
0
Screen field is displayed, even if Invisible is set statically.
Field contents are displayed.
Not ready for input, even if Input is set statically.
1
0
0
0
Screen field is displayed, even if Invisible is set statically, except when Output only is set statically.
Field contents are not displayed.
Not ready for input, even if Input is set statically.
1
1
1
1
Screen field is displayed, even if Invisible is set statically, except when Output only is set statically.
Field contents are not displayed.
Ready for input, even if Input is not set statically. User input is masked by asterisks (*).
1
1
0
1
Screen field is displayed, even if Invisible is set statically, except when Output only is set statically.
Output is masked by asterisks (*).
Ready for input, even if Input is not set statically. User input is masked by asterisks (*).
1
0
1
1
Screen field inactive.
Screen field is not displayed, regardless of the static attributes.
0
0
0
1
Screen field inactive.
Screen field is not displayed, regardless of the static attributes.
Br,
Laxmi

FIOS Television Cisco CHS 435HDC: Ethernet input Enabled?

Similar Messages

Maybe you are looking for