Fios Upgrade Bugs

Since last weeks upgrade I have noticed the following bugs, wondering if they are system wide or specific to my installation:
1. Caller ID now shows up about 30 seconds into the call, it would be more helpful to know who is calling before I pick up.
2. The guide screen for shows just started does not display properly, when scrolling you see a show that has just ended, but when focus on the detail comes into view the name is displayed to the now showing show. Why have the scroll if it's not accurate
3. Guide scrolling has become slower in the new interface.
4. DVR has become very flakey, competing shows start and the warning comes up after the show has stared of the conflict.
5. On-Demand. Was it allways this way (don't think so) that you can no longer fast forward more than 2x. Fios dropped me in the middle of a purchased movie and I had to start from the beginning, resume play did not work (started over) and could only 2x fast forward.

When you try to schedule shows that are further out than the current schedule, the dvr reboots. Happened twice today When trying to schedule Touch which starts 1/25. Problem occurs When trying to schedule the show or series. I have two 7232 dvrs with attached esata drives.

Similar Messages

Cisco Prime 2.0.0 to 2.0.1 Upgrade bug id CSCun11428 resolution

Has anyone managed to locate the details of how to resolve the Caveat in upgrading to Prime 2.0.0.0.294 to 2.1.0.0.87. There is a bug ID of CSCun11428 in the release notes.
ttp://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#83938
show application status NCS (version 2.0.0.0.294)
Health Monitor Server is running.
Ftp Server is running
Database server is running
Tftp Server is running
Matlab Server is running
NMS Server is running.
Plug and Play Gateway is running.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
show application status NCS (Version 2.1.0.0.87)
Health Monitor Server is running.
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.
CNS Gateway with port 11011 is down
CNS Gateway SSL with port 11012 is down
CNS Gateway with port 11013 is down
CNS Gateway SSL with port 11014 is down
Plug and Play Gateway Broker with port 61617 is down
Plug and Play Gateway config, image and resource are down on https
Plug and Play Gateway config, image and resource are down on http
Plug and Play Gateway is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
I have tried numerous reloads of the Prime Unit (Physical box) but to no avail. If anyone is able to assist in the resolution of this bug it would be much appreciated. The Bug search tool says that the fix is not yet in the public domain but the 2.1 Relased notes mention it as a closed caveat.
This prime was running in a HA pair prior to being split for the upgrade. Both boxes are identical.
Any help would be appreciated.
Thanks

If your familiar with WCS or NCS, then change the theme from lifecycle to classic mode. You can change this by clicking on the top right in the GUI by the login name:
Prime Infrastructure provides two different graphical user interfaces (from which you can switch back and forth by clicking the downward arrow next to your login name):
Then you can follow this guide.
http://www.cisco.com/en/US/docs/wireless/ncs/1.1/configuration/guide/maps.html#wp1179446
Sent from Cisco Technical Support iPhone App

Contact List OS Upgrade Bug

Hi - This isn't a question as much as bug I found.
I upgraded the OS via the Desktop Software on my MacBook last night to 5.0.0.972 and my contacts were not restored from the backup that it took just prior to the OS upgrade - everything else seems fine. Weirdly though, my historic call list retained the names against the numbers!
Just something to look at I guess...And will know to back them up separately in future! :-)
Stephen

Also....as part of the upgrade it moved 2 of my installed apps (BeWeather and TSN) from the Installed section to the Uninstalled section of My World, despite them still being installed. Reinstalling both apps resolved that though with no effect on overall memory usage....just a minor annoyance!

4.2.2 upgrade bug re Music Unlimited

I hope this helps anyone else who hits this very vexing problem. Took two solid days of phone calls, but I finally reached someone somewhere in the world at Sony who was able to explain this and help me fix it. He said it is a known bug. The 4.2.2 Xperia Z wifi tablet upgrade created the appearance that my (and your?) tablet was actually several different devices that had all logged in to Music Unlimited, thereby violating a three-device limit on the basic paid Music Unlimited subscription. After that happened, I was prevented from saving any new music for OFFLINE playback. For example, I could save an album while online, and I could place the album in a playlist that was checked for "available offline", but then when I went offline the album and playlist would not be there. The solution was that I had to delete all my Music Unlimited account files and info from the Xperia Tablet and then sign back in to Music Unlimited. My music was saved (I guess backed up from somewhere in the clouds), so I was restored and good to go.

First, open Music Unlimited app on your Xperia tablet, go to Settings/Account Settings and Sign Out. Then close out of the app.
Second, open Settings on the tablet, and select Apps. You must go through settings, not through the Apps tab. Under Apps, select Music Unlimited. Under Storage, select Clear Data. Under Cache, select Clear Cache.
I think that was all there was to it. Then I restarted Music Unlimited, and it started to give me first-timer's welcome to the service, except when it was done loading it somehow recognized me and backed up my albums and playlists from The Cloud. The only glitch was that it unchecked every Available Offline box on all my playlists, so I had to go back in and re-check them.
I only use one device on Music Unlimited. If you run more than one device, it is possible that this process might be more involved. Good luck

Lenovo Yoga 2 830LC tablet 8" lollipop upgrade bugs

After I upgraded my tablet to lollipop 5.0.1 I am facing some issues 1. Tablet nor taking restarts successfully at any of the attempts. So always have to do hard reset to start.2. Apart from predefined lockscreen images ,in KitKat version it was possible to customize your own images as lockscreen.But now you cannot crop the images desirably and thus displaying over cropped zoomed pictures. 3. Internet data toggle needs a two step touch to connect. Which should be customized to once as before. 4. No shortcut widgets provided.5. Addition of extra home screens should be allowed.6. When switched on after hard reset, the auto rotate settings gets turned off .7. Other instabilities are there which are annoying, if compared to the KitKat performances

Thanks for letting us know about the bugs in the lollipop update. I'll wait for the stable version, until then will use the existing KitKat version. And this i also recommend to the fellow owners of the yoga tablet 2.

5230 after firmware upgraded bug

I use nokia 5230. after I updated from 12.0.089 to 20.0.005. I feel better on dragging menu icon, faster and wider screen web browser, more stable music player. but I found some bugs that:
1. When I opened web browser for 3-4 pages with music player and then went to menu(all programs still opened) screen still show contact bar and menu's icons didn't showed.
2. Programs installer are much time freezes if open after downloaded from web browser immediately.
3. Sometime menu icons don't responded espectially specially the Application icon and Log icon
4. Phone lock slide bar sometime vibrate agaist the slide but sometime not.
Before I upgraded, all of them never shown until it.
Please reply me to my email.

@KiNzU; this has been discussed a few times before mate;
/t5/Nseries-Devices-and-S60/X6-problem-Message-Alert/td-p/686602
/t5/Nseries-Devices-and-S60/N97-Mini-Problems-with-alerts-for-new-messages/td-p/685661
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Are "Script: resource://gre/modules/XPIProvider.jsm " the result of an upgrade bug in FF?

I was getting similar "unresponsive script" messages in a laptop running Win 8 and the recommended fixes didn't work so I took to using a PC with Xp, which worked fine until recent FF upgrades. The only other fix I've tried is adding FB Phishing Protector which hasn't cured the problem.
FF v. 23.0
Error message: Script: resource://gre/modules/XPIProvider.jsm -> jar:file:///C:/Documents%20and%20Settings/Owner/Application%20Data/Mozilla/Firefox/Profiles/pbo63226.default/extensions/%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D.xpi!/bootstrap.js -> jar:file:///C:/Documents%20and%20Settings/Owner/Application%20Data/Mozilla/Firefox/Profiles/pbo63226.default/extensions/%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D.xpi!/lib/contentPolicy.js:415

Based on a web search, {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d} identifies AdBlock Plus. You can compare the more friendly names of extensions with their alphanumeric identifiers on this page:
Help > Troubleshooting Information
It would be in the second table, under the Extensions heading.
If there's a problem with AdBlock Plus in Firefox 23, then lots of people are going to have it. Can you check for an update?
orange Firefox button (or Tools menu) > Add-ons > "gear" button > "Check for Updates"

Upgrade Bug from 3.0.1 to 4.0.1 - syntax not accepted now

Hi,
I have just upgraded to Apex 4.0.1 (full installation from previous installed 3.0.1) in order to add the Ajax item functionality to my existing 3.0.1 app and getting the following really weird syntax error when I try to build an existing 'On Submit - Before Computations and Validations' process (get error just by clicking Apply Changes without making any modifications to it).
The error is flaggged for the line below (which constructs a report column title) and subsequent references where APEX 4 doesn't seem to build the &P11_PCT_DRIFT1. syntax which previously worked? Bit lost on this as none of the items have changed at all here it seems to have been caused purely by the upgrade. I also tried to Apply Changes in Mozilla as Apex 4 requires you upgrade IExplorer to 7 however both browsers show the same issue. Any help would be appreciated. Thanks.
:P11_LTG1_TITLE := 'LTG ' || &P11_PCT_DRIFT1. || '% drift';
P11_LTG1_TITLE is Hidden
P11_PCT_DRIFT1 is a Select List
1 error has occurred
ORA-06550: line 71, column 30: PLS-00103: Encountered the symbol "&" when expecting one of the following: ( - + case mod new null <an identifier> <a double-quoted delimited-identifier> <a bind variable> continue avg count current max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification> <a number> <a single-quoted SQL string> pipe <an alternatively-quoted string literal with character set specification>
declare
cursor col_titles_cur(column_name VARCHAR2) is
select col_title, order_by
from display_column_titles_v
where col_name = column_name;
col_titles_rec col_titles_cur%ROWTYPE;
tempVal VARCHAR2(2000):= :P11_DISPLAY_COLUMN_ORDER;
round_selected NUMBER := instr(:P11_DISPLAY_COLUMN_ORDER, 'bfr.round');
show_summary_only NUMBER := instr(:P11_DISPLAY_COLUMN_ORDER, 'summary');
currVal VARCHAR2(2000):= '';
field_pos NUMBER := 0;
begin
:P11_COURT := :P4_COURT;
if :P11_COURT != '-1' then
:P11_COURT_DISPLAY := :P4_COURT_DISPLAY;
-- :P11_COURT_IN := replace(:P11_COURT_IN_PARAM,':',',');
-- :P11_COURT_IN := '' || replace(:P11_COURT,':',''',''') || '';
-- :P11_COURT_PARAM_IN := '' || replace(:P11_COURT_PARAM_IN,':',''',''') || '';
else
:P11_COURT_DISPLAY := '- All Courts -';
end if;
:P11_SUBMIT_COUNT := to_char(2);
:P11_COL1_TITLE := 'null';
:P11_COL2_TITLE := 'null';
:P11_COL3_TITLE := 'null';
:P11_COL4_TITLE := 'null';
:P11_COL5_TITLE := 'null';
:P11_COL6_TITLE := 'null';
:P11_COL7_TITLE := 'null';
:P11_COL8_TITLE := 'null';
:P11_COL9_TITLE := 'null';
:P11_COL10_TITLE := 'null';
:P11_COL1_VALUE := 'null';
:P11_COL2_VALUE := 'null';
:P11_COL3_VALUE := 'null';
:P11_COL4_VALUE := 'null';
:P11_COL5_VALUE := 'null';
:P11_COL6_VALUE := 'null';
:P11_COL7_VALUE := 'null';
:P11_COL8_VALUE := 'null';
:P11_COL9_VALUE := 'null';
:P11_COL10_VALUE := 'null';
:P11_COL_ROUND_ID_VALUE := 'null';
:P11_COL1_GROUPBY := 'null';
:P11_COL2_GROUPBY := 'null';
:P11_COL3_GROUPBY := 'null';
:P11_COL4_GROUPBY := 'null';
:P11_COL5_GROUPBY := 'null';
:P11_COL6_GROUPBY := 'null';
:P11_COL7_GROUPBY := 'null';
:P11_COL8_GROUPBY := 'null';
:P11_COL9_GROUPBY := 'null';
:P11_COL10_GROUPBY := 'null';
:P11_COL_ROUND_ID_GROUPBY := 'null';
:P11_COL1_ORDERBY := 'null';
:P11_COL2_ORDERBY := 'null';
:P11_COL3_ORDERBY := 'null';
:P11_COL4_ORDERBY := 'null';
:P11_COL5_ORDERBY := 'null';
:P11_COL6_ORDERBY := 'null';
:P11_COL7_ORDERBY := 'null';
:P11_COL8_ORDERBY := 'null';
:P11_COL9_ORDERBY := 'null';
:P11_COL10_ORDERBY := 'null';
:P11_LTG1_TITLE := 'LTG ' || &P11_PCT_DRIFT1. || '% drift'; -- *** error flagged for this line, and following 8 lines if this is commented out ***
:P11_LTG2_TITLE := 'LTG ' || &P11_PCT_DRIFT2. || '% drift';
:P11_LTG3_TITLE := 'LTG ' || &P11_PCT_DRIFT3. || '% drift';
:P11_LTB1_TITLE := 'LTB ' || &P11_PCT_DRIFT1. || '% drift';
:P11_LTB2_TITLE := 'LTB ' || &P11_PCT_DRIFT2. || '% drift';
:P11_LTB3_TITLE := 'LTB ' || &P11_PCT_DRIFT3. || '% drift';
:P11_DTB1_TITLE := 'DTB ' || &P11_PCT_DRIFT1. || '% drift';
:P11_DTB2_TITLE := 'DTB ' || &P11_PCT_DRIFT2. || '% drift';
:P11_DTB3_TITLE := 'DTB ' || &P11_PCT_DRIFT3. || '% drift';
if show_summary_only <= 0 then -- do all routine allocating columns only if a summary isnt in selected shuttle list
--

Thanks very much.
Also have an issue relating to forming an IN CLAUSE dynamically within an items LOV definition when using the new Cascading LOV Parent Item(s) functionality.
I dont really understand and cant find examples of how you reference the multiple values returned from a multiselect list parent within the IN CLAUSE of a child LOV definition or the syntax.
Wondered how would the following Child LOV definition look synctactically for both string values returned from the parent (maybe you have to insert quotes around each of the individual returned strings and replace colons with commas?) and also for numeric values returned from the parent?
select a,b .... where col in (PARENT MULTI LOV MULTIPLE VALUES RETURNED)
I have a parent Multiselect LOV P4_SERIES which filters another Multiselect LOV P4_SERIES_CHILD and I was previously forming the in clause for the child LOV, P4_SERIES_IN, in a Submit Process by replacing the colons with commas and quotes surrounding each comma then using this syntax to get the IN CLAUSE .... series in ('&P4_SERIES_IN.'). An example of how this breaks down is -
P4_SERIES parent multiselect result string1:string2:string3
Submit Process contained statement: :P4_SERIES_IN := '' || replace(:P4_SERIES,':',''',''') || '';
After submit process P4_SERIES_IN in clause part formed as string1','string2','string3
The child LOV, P4_SERIES_CHILD, definition is
select .... where (series in ('&P4_SERIES_IN.') or :P4_SERIES = '-1')
which when substituting in P4_SERIES_IN parses as
select .... where (series in ('value1','value2','value3') or :P4_SERIES = '-1')
With the new Cascading LOV Parent Item(s) functionality I am hoping to move the child LOV 'IN CLAUSE' formulation directly in the LOV definition instead of the Submit Process
as the Submit Process will no longer be needed because the change of parent lov will cause the child lov SQL to be called to filter its values. The main issue I dont understand is how to form the IN CLAUSE syntactically to get the equivalent of the above. I only got this to work experimentally in the first place apologies for my newness to this syntax and lack of understanding.
Need to combine
select .... where (series in ('&P4_SERIES_IN.') or :P4_SERIES = '-1')
with
:P4_SERIES_IN := '' || replace(:P4_SERIES,':',''',''') || '';
to give
select .... where (series in ('string1',string2,'string3') or :P4_SERIES = '-1')
I also have a requirement for numeric ids returned from a different parent lov into another child lov which you would presume might be done with (note ',' instead of ''',''')
:P4_PARENT_IN := '' || replace(:P4_PARENT,':',',') || '';
to give child lov definition
select .... where (numcol in (1,2,3) or :P4_PARENT = '-1')
This doesnt seem to work for me so the syntax to achieve this is not clear to me.
Thanks

Static file with application: deleted on app install/upgrade (bug?)

Hi,
say we have an app (app_id: 100) with abcd.js static file associated with this application (so this is not a workspace static file). Export this app, then import back plus install to the same workspace but on a different and existing application id. Now this new (upgraded) app has abcd.js associated with it in static files, but the original app 100 hasn't. Is this expected? I'm on apex 4.1.1.00.23
Edited by: tlajos on Aug 15, 2012 6:05 AM

bump: seems to be present in 4.2 current EA, too

AIR Upgrade Bug

I am using Flash Builder 4.5 and I manually downloaded the Flex 4.6 SDK and overlayed AIR SDK 3.5 on top of that and configured Flash Builder 4.5 to use that. However, whenever I launch directly to my Nexus 10 I get the following message:
"Your device has an older version of Adobe AIR installed. Would you like to upgrade it to Adobe AIR 3.5.0.1060?"
The device already has Adobe AIR 3.5.0.1060 installed. Selecting Yes or No produces the same results. I have even attempted to uninstall Adobe AIR on the device and then run the application however any subsequent launches still produce the same update message.
Anyone know how to fix this?

Why not embed the AIR plug in and avoid this whole mess, and make it easier for your users. Before we could embed the AIR player with our apps I had a lot of users complaining about downloading the stand alone AIR plug in so its a good move all around.

E 61 Firware Upgrade BUG !!

today itself i updated my firmware which was something like 1.##### to the l8st one 3.0633.09.04
after firmware upgrade my phone's voice has decreased a gr8 deal which was quite high earlier widout n y equilizer modification !!
now m intending to get back that older firmware how can i get that someone help me on this plz !!
thnx in advance !!

no one cares to reply here i guess !!

New iTunes Upgrade bug - disallows connection to iTunes store

I just installed, re-installed, repaired, flushed DNS cache, removed firewalls, disabed pop-up blockers - EVERYTHING...and my iTunes store will not connect due to a time out error.
Any idea when this will be fixed?

I just installed, re-installed, repaired, flushed DNS
cache, removed firewalls, disabed pop-up blockers -
EVERYTHING...and my iTunes store will not connect due
to a time out error.
Any idea when this will be fixed?
I am having the same exact issue and need to know how to fix this problem as well.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

New to FIOS

Hi all,
Just had FIOS installed yesterday and for the most part, I really like it. I've been a DISH customer for over 10 years but the triple play package I was offered was too good to pass up, so I made the change. I'll be reasding more in the fourms but one thing I noticed and was dissappointed by was getting the NHL Center Ice package and then seeing that the feeds, except for the NHL HD channel, are all in SD. DISH's feeds were all in HD so I was wondering if anyone could commnet on how quickly FIOS upgrades channels to HD? Also, I found it irritating to see you could only make two Favorite lists while DISH let me make 4 I think. With so many channels, that seems like a strange limitation to me and I was wondering if more had been requested by FIOS customers to better manage sets of channels?
Thanks

salsaguy wrote:
I just signed up for Fios Extreme HD w/ Fios 25/25 Internet the other day.
My install is in March
I was a DirecTV subscriber since 2001 and have never had any issues w/ DTV.
Upgrading my internet from Verizon DSL 3 MB system
Crossing FIngers
I used Tivo DVR boxes I owned outright (no loan/borrow).
Im getting a Multi room DVR, DVR and HD Settop for 3 rooms
I have the link to do the DVR upgrade if the box I get on install isnt the new Motorolo 7232
Anything I should be worried about or prepare for?
   You can expect the internet speeds to usually exceed the limits, both up and down
   and the multi-room dvr is really awesome. Prepare to learn how to use the widgets to
   your benefit (traffic, weather, etc) - a nice feature that many overlook. Good luck!

After upgrading to Lion my internet connection doesn't work

Hey folks,
     MacPro 2010, wired connection through Verizon FiOS, upgraded to Lion (via App Store) back in July, but now my wife says she can't get on the Interent
on her account, even though all connections are good, she has an IP, subnet, DNS are good, the ethernet settings say she is connected, but using Chrome (13.0.782.122) or Safari, just hangs on browser launch. No URL will resolve no matter what site I enter. But when I log out of her account and into mine I can connect using the same Chrome browser just fine.
     The only thing I can come up with is Chrome has had issues for quite some time on Snow Leopard and Lion when trying to update. About Chrome will display there is a new version and hitting the Install button will result in a "Update Server not available Error Code: 12". Any workaround by the Chrome Blog was not helpful, and uninstalling and reinstalling the program would sometimes work. But every so often when I would manually check About Chrome it would mysteriously be updated all by itself, and I was fine. Eventually though, every so often I would check and it would say there's a new version and I would get the infamous error. I could never seem to update the program myself. I would have to wait until it did it on its own?
I don't know if fooling around with Chrome's insides (using AppTrap to get rid of Chrome, manually deleting Preferences.js files, etc) corrupted something on my wifes account, which is a limited account and had some Parental Controls enabled - although she had Allow Unrestricted Access to Internet Sites checked off. I DID, however, have the Apps section restricted at some level, and I believe certain Chrome features were blocked ( like google updater), because while logged into her account, chrome would pop up: "you don't have access to GoogleUpdater...etc" and another one named   "xml or xmd" something or other, I can't remember exactly so I apologize. But while troubleshooting the no internet issue, I hit "Always Allow" for both messages, put in my password and she still couldn't get on the web, even when I turned off Parental Controls altogether. I couldn't even do a Software Update, it would just not move.
I even opened a Terminal window and Pinged www.google.com and was receiving replys at a steady rate, so I don't know what else to try. Safari is also exhibiting this same behavior, so I'm thinking its a common issue with both browsers since both use Webkit? I could be wrong obviously...
I'm at a loss as to what it could be or what to test out. Any help would be welcomed.
Philip

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Fios Upgrade Bugs

Similar Messages

Maybe you are looking for