Fios wifi at home with Airport extreme extender?

Have latest hardware Airport Extreme, just got Fios Wifi. Can I use AE to extend the Fios wifi router? and how to do it? Thanks in advance William

The Fios router and AirPort Extreme need to connect using a wired Ethernet cable connection....or if that is not possible....you might be able to use a pair of Ethernet powerline adapters to send the Ethernet signal over the existing AC powerlines in your home.
Connect from a LAN <-> port on the Fios router to the WAN "O" port on the AirPort Extreme.
Configure the AirPort Extreme to create a wireless network using the exact same wireless network name, same wireless security settings and same wireless network password as the Fios network.
The final step would be to insure that the AirPort Extreme is configured to operate in Bridge Mode to work correctly on the network.
There are other much more complicated methods to connect the devices together as well, but another user will need to post on details in that regard.

Similar Messages

Impossible to Wifi link G5 with Airport Extreme to Sagem Livebox

I am not sure quite where to this. Thanks for any help.
Kevin
I live in France and have just aqquired a Livebox from Orange. I have installed An Airport Extreme in my 2004 dual processor G5 with the aim of having a wire free connection.
I already have an up and running ADSL line. I unplugged the MAC ADSL (high speed) Ethernet modem and took it off the the telephone plugs from the wall sockets (to avoid any interference). I then configured the livebox using a laptop PC with a USB Orange WiFi connection. This worked perfectly.
With this running, I tried to link in the Mac as a second computer using the specified methodology. However, when I put in the WPA/WEP code, the MAC said that this code format is not accepted. I tried various things over about 2 hours but with no success. I even moved the Livebox-38d1 closer next to the MAC.
The MAC detected it on the "finder" Airport list (at the top Right hand side of the main screen).
As far as security codes are concerned I am not sure what the difference is between WPA and WEP, if any. Actually, the automatic security code requested was WEP and NOT WPA Personal as in the documents from Orange.
I have read the UK Orange site help notes (although some of the links are not working... ).
Advice and help please.
Note that all I am trying to do at this point in time is to use Wifi to connect the MAC up as a second computer on the Livebox.
Any advice would be appreciated. Thanks.
Kevin GARDINER in Lille

On the French forum: http://forums.macgeneration.com I found the solution (after reading about thirty contributions). The Sagem Livebox key to be used is WEP hexadecimal and NOT WPA Personal as written in he Orange documenation.
I hope this may help somebody.
Until the next time. Kevin

Cant use skype with airport extreme

i am exploring the idea of using skype for calls to canada from my iphone and eliminating my land line. i subscribed to the service and am having difficulty with connecting via wifi at home over airport extreme. Getting a connection seems to be hit or miss. i was connected a couple of times. i read in the skype support pages that airport is a closed network and will not support a skype connection. i found information about opening file sharing and modifying some port access. before i start playing around with that, i thought somebody out there has figured this out.

GG wrote:
... i read in the skype support pages that airport is a closed network and will not support a skype connection.
I don't know where you read that, but I'd question the source. The term "closed network" in this context is a non-sequitur.
Skype works fine with AirPort, even the older 802.11g version. It requires no special configuration. I haven't used it with an iPhone, but Skype worked with an iPod Touch (no mic though ) and runs fine even on my ancient G3 iMac. I'd speculate your internet connection might be too slow for reliable voice communication, but it is also possible the wireless connection to your iPhone may be a limiting factor.
What kind of service do you have?

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

Can i use a cisco RE1000 range extender with airport extreme

Can I use a Cisco R1000 range extender with airport extreme?

Apple's "extend a wireless network" function appears to be a proprietary feature that will only work with other Apple routers.
As far as we know, devices from other manufacturers are not compatible with this feature.
Bottom line....It would be extremely unlikely that this would work, but it's worth a try if you already have the products in hand.
Please post on your results.

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Cisco router RVS4000 with Airport extrem and Time capsule.

Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
Airport extreme and Time capsule is conected via ETH.
Any idea ?
Thaks
B.

If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
see http://support.apple.com/kb/HT4260

IPhone won't work with Airport Extreme

I got my iPhone when they were released, but I still can't get it to connect to my home's Airport Extreme Wi-Fi network. My software is updated weekly, so I don't think that can be the problem. When I switch the iPhone settings to Wi-Fi, my home network appears, and the Edge icon is replaced with the Airport icon, but when I try to use the connection, it fails and I get this error message: "Safari can't open the page because it can't find the server." Can anyone help me with this?

Funny you should mention it... Although I have been using my iPhone for months with various WiFi networks (including my home Airport Extreme network) I did happen to get a little dialogue box this morning with precisely the same error message. I proceeded to reset my iPhone and it happily went back to working just fine, as before.
Reset by holding both the Sleep/Wake and Home buttons until the Apple logo appears in the center of the screen.
If this is waaay obvious, and you already tried it, then never mind... It was worth a try...

Voip WiFi UStarCom Clamshel phone & Airport Extreme

My clamshell wifi voip phone (UStarcom) cannot even connect to the AP. The manual offers no explanation that hasn't been tried. I cannot connect this "wonderful" voip wifi phone.
Is it compatible with Airport Extreme (802.11n)? The manual says the phone is capable of 802.11n. But configuring the wifi connections in the phone still it cannot connect to my AP. What can be done? Company offers no assistance to private users. How do I get it connected to the AP? I have a SIP account but without AP phone is useless. Extreme works well with my iMac and PB. Thanks if someone can offer help. Please advise. Hard to find anyone who has knowledge.
PB G4 Mac OS X (10.4.9)

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

Too small network with AirPort Extreme

I've installed an AirPort Extreme, extended by an AirPort Express, to connect with our cable modem and improve our wireless reception; we now get a strong signal throughout the house. But with our 7 wireless devices (2 MacBook Pros, 2 iPads, 2 iPhones, and a Kindle Fire), we rarely are successful in logging on more than two of the devices at a time. For a third or fourth device the icon will merely churn away. This doesn't fit my idea of a network. What should I do to improve the situation?

... My question is. If I work with an iPhone, the AE is going to work just with g forcing to TC to work with g as well with the rest of the equipments
The answer is yes, but I believe you can avoid that by having the iPhone connect only to the new dual band TC. Configure *everything else* to run an 802.11n network exclusively - not "802.11n (b/g compatible)". This way the iPhone will be unable to connect to that network, causing it to run in the slower b/g compatible mode. Your iPhone will work fine, as long as it remains within range of your TC's 802.11g wireless network.
Remember that you will need to change all your equipment's settings: the Extreme, the Express, the TC, and maybe the AppleTV.
Galt's rule of networking: "The number of problems you encounter increases exponentially with the number of devices on your network."
So... proceed methodically.
The new TC is very close to AppleTV but wirelessly. Will I increase the speed for watching movies which are placed at TC (through external disks connected to the USB in the new TC) if I connect the TC to AppleTV using an ethernet cable?
The speed will be limited by the slowest link in your network chain. A wired network is always preferable, since it cannot be affected by interference or obstructions.
If you are streaming movies from the Internet, your wireless link will probably be the limiting factor.

Automatic backups more on Drobo with Airport Extreme

Sure you can as I continue to help with your good type, with a similar problem though.
Silk for about 1 week alone makes my iMac 24 inch no automatic backups more on Drobo with Airport Extreme version 7.6.3 Connected via a USB cable. Went up a few weeks ago Actually getting rid of problem with the backup from Time Machine program of MAC OS X version 10.8.3.
I take a can further help me secure forgive me my english is not my native language.

The Timed Access settings in AirPort Utility will allow you to control "who" connects to your network and "when" they can connect.
AirPort Utility >Click AirPort icon > Edit > Network tab > Enable Timed Access
For more information, click the Help menu at the top of the screen
Click AirPort Utility Help
Click Setting up a WiFi network,
Click Control when a user can access your network, and also
Click Control access to your wireless network.

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Fios wifi at home with Airport extreme extender?

Similar Messages

Maybe you are looking for